Efficient copper-catalyzed S-vinylation of thiols with vinyl halides

The synthesis of vinyl sulfides through the coupling reaction of thiols with vinyl iodides, bromides, and chlorides is described. The thiols can couple with aryl iodides in the presence of only 0.5 mol % Cu(2)O without the need for an ancillary ligand. In the presence of 5 mol % of Cu(2)O and 10 mol % 1,10-phenanthroline as the ligand, the more challenging alkyl vinyl bromides can also be coupled with thiols, giving the vinyl sulfides in good to excellent yields.     

Efficient ligand-free copper-catalyzed C-S cross-coupling of thiols with aryl iodides using KF/Al2O3 as base

We report a mild, convenient, environmentally friendly, and ligand-free synthetic protocol for the cross-coupling reaction of aryl iodides and thiols using 10 mol % CuI with KF/Al₂O₃ as the base, in DMF at 110 °C. Using this protocol, we have shown that a variety of aryl sulfides can be synthesized in excellent yields from readily available iodides and thiols.     

A general rhodium-catalyzed cross-coupling reaction of thiols with aryl iodides

The general procedure for the rhodium-catalyzed cross-coupling of thiols with aryl iodides is described. The catalytic system consists of 5 mol % of [RhCl(cod)]₂ and 10 mol % of PPh₃ as a ligand. A variety of aryl iodides reacted with thiols, giving aryl thioethers in good to excellent yields. It is important to note that the deactivated aryl iodides such as 4-iodoanisole is worked smoothly to provide the corresponding aryl thioethers in excellent yields. Functional groups such as free-amines, chloro, are all tolerated under the employed reaction conditions.     

Manganese‐Catalyzed Cross‐Coupling of Thiols with Aryl Iodides

A manganese‐catalyzed cross‐coupling reaction of thiols with aryl iodides, furnishing aryl thioethers in good to excellent yields has been reported; the system shows good functional group tolerance and enables the sterically demanding aryl iodides to couple with thiols.     

Catechol violet as new, efficient, and versatile ligand for Cu(I)-catalyzed C-S coupling reactions

Combination of CuI and Catechol violet (CuI-CV) was employed as catalyst for the first time in the C-S coupling reaction of a wide variety of aromatic halides, such as aryl iodides, bromo pyridines, activated aryl chlorides, and vinyl iodide with thiols to afford the corresponding thioethers in good to excellent yields. Broad range of functional group tolerance present in both the coupling partners has been observed in this reaction protocol.     

Ligand-free copper-catalyzed C-S coupling of aryl iodides and thiols

A protocol for the copper-catalyzed aryl-sulfur bond formation between aryl iodides and thiophenols is reported. The reaction is catalyzed by a low amount (1-2.5 mol %) of readily available and ligand-free copper iodide salt. A variety of diaryl thioethers are synthesized under relatively mild reaction conditions with good chemoselectivity and functional group tolerance.     

Copper-free sonogashira coupling reaction with PdCl2 in water under aerobic conditions

A mild protocol for the copper-free Sonogashira coupling of aryl iodides with terminal acetylenes in water under aerobic conditions has been developed. The use of 1 mol % PdCl(2) in the presence of pyrrolidine allows the coupling reaction to proceed at room temperature or 50 degrees C with good to excellent yields.     

Microwave‐Assisted Cross‐Coupling for the Construction of Diaryl Sulfides

The construction of diaryl sulfides through the cross‐coupling of aryl iodides and thiols in microwave heating is described. By using this method, a variety of diaryl sulfides can be prepared in a mild condition and in high yields. Deactivated 4‐nitrothiophenol was effective to afford the product in 94% yield. Sterically hindered ortho‐substituted aryl iodides or thiophenols provided diaryl sulfides effectively by this microwave‐assisted coupling reaction.     

Palladium-catalyzed cross-coupling reactions between dihydropyranylindium reagents and aryl halides. synthesis of C-aryl glycals

[reaction: see text] Palladium(0)-catalyzed cross-coupling reactions between tris(dihydropyranyl)indium 1 and aryl halides 2 have been investigated. Aryl iodides and electron-deficient aryl bromides couple efficiently with the in situ-generated indium reagents in the presence of 1-5 mol % Cl(2)Pd(PPh(3))(2) to produce substituted dihydropyrans 3 with minimal (<10%) dimer (4) formation. Organoindium reagents derived from D-glucal also undergo cross couplings with aryl iodides to produce C-aryl glycals.     

An efficient intermolecular C(aryl)-S bond forming reaction catalyzed by BINAM-copper(II) complex

A wide range of diaryl thioethers and aryl alkyl thioethers are synthesized from the corresponding aryl iodides and aromatic/aliphatic thiols through Ullmann type intermolecular coupling reactions in the presence of a catalytic amount of easily available BINAM-Cu(OTf)₂ complex. Less reactive aryl bromides have also been shown to react with thiols under identical reaction conditions to give good yields of the thioethers without increasing the reaction temperature and time.     

Efficient palladium-catalyzed homocoupling reaction and Sonogashira cross-coupling reaction of terminal alkynes under aerobic conditions

An efficient method for palladium-catalyzed homocoupling reaction of terminal alkynes in the synthesis of symmetric diynes is presented. The results showed that both Pd(OAc)(2) and CuI played crucial roles in the reaction. In the presence of 2 mol % Pd(OAc)(2), 2 mol % CuI, 3 equiv of Dabco, and air, homocoupling of various terminal alkynes afforded the corresponding symmetrical diynes in moderate to excellent yields, whereas low yields were obtained without either Pd(OAc)(2) or CuI. Moreover, high TONs (turnover numbers; up to 940 000 for the reaction of phenylacetylene) for the homocoupling reaction were observed. Under similar reaction conditions, cross-coupling of 1-iodo-4-nitrobenzene with phenylacetylene was also carried out smoothly in quantitative yield. However, the presence of CuI disfavored the palladium-catalyzed Sonogashira cross-coupling reactions of the less active aryl iodides and bromides. In the presence of 0.01-2 mol % Pd(OAc)(2), a number of aryl iodides and bromides were coupled with terminal alkynes in good to excellent yields. It is noteworthy that this protocol employs mild, efficient, aerobic, copper-free, and ligand-free conditions.     

Copper‐Catalyzed Cross‐CouplingLigand‐Free Conditions Reaction of Thiols with Aryl Iodides under

Commercially available CuO powder is found to be a suitable catalyst for C‐S coupling reaction between aryl‐ and alkyl thiols and aryl iodides. Functional groups including halides, ketone, unprotected amine and heterocycles were tolerated by the reaction conditions employed.     

Formation of arylboronates by a CuI-catalyzed coupling reaction of pinacolborane with aryl iodides at room temperature

[reaction: see text] The coupling reaction of pinacolborane with aryl iodides under the catalysis of 10 mol % CuI and the action of sodium hydride in THF works at room temperature to provide corresponding arylboronates in good yields. Aryl bromides give poor conversion under these reaction conditions.     

A general method for the formation of diaryl selenides using copper(I) catalysts

We report a mild, palladium-free synthetic protocol for the cross coupling reaction of aryl iodides and phenyl selenol using 10 mol% CuI/neocuproine, NaOt-Bu or K₂CO₃ as base, in toluene, at 110°C. Using this protocol, we show that a variety of diaryl selenides can be synthesized in good yields from commercially available aryl iodides.     

Ligand-free palladium catalysis of the Suzuki reaction in water using microwave heating

[reaction: see text] We report the ligand-free palladium catalysis of the Suzuki reaction in water using microwave heating. Our methodology uses low palladium loadings (0.4 mol %), is fast (5-10 min reaction time), and is useful for couplings involving boronic acids and aryl iodides, bromides, and chlorides.     

Palladium-catalyzed Stille cross-couplings of sulfonyl chlorides and organostannanes

Arene and phenylmethanesulfonyl chlorides can be cross-coupled with aryl, heteroaryl, and alkenylstannanes with desulfitation in the presence of 10 mol % CuBr.Me2S, 1.5 mol % Pd2dba3, and 5 mol % tri-2-furylphosphine in tetrahydrofuran or toluene under reflux. This extension of the Stille cross-coupling reaction realizes a new and economical method for the generation of C-C bonds. The palladium-catalyzed carbonylative Stille cross-coupling reactions of arenesulfonyl chlorides and organostannanes in the presence of CO (60 bar) at 110 degrees C in toluene generate the corresponding ketones. Arenesulfonyl chlorides are more reactive than aryl chlorides and aryl bromides in their Stille cross-coupling with organostannanes but less reactive than aryl iodides. The new methods disclosed for the generation of C-C bonds open new possibilities for medicinal chemistry and material sciences.     

Efficient copper-catalyzed C-S cross-coupling of heterocyclic thiols with aryl iodides

A copper-catalyzed cross-coupling of heterocyclic thiols with aryl iodides is reported. The reaction was carried out in the presence of CuI (5 mol %), 1,10-phenanthroline (10 mol %) and K₂CO₃ (1.3 equiv) in DMF at 120 °C. A variety of heterocyclic sulfides were prepared in high selectivities and yields.     

Efficient synthesis of 2,2-diaryl-1,1-difluoroethenes via consecutive cross-coupling reactions of 2,2-difluoro-1-tributylstannylethenyl p-toluenesulfonate

2,2-Difluoro-1-tributylstannylethenyl p-toluenesulfonate (2) was reacted with aryl iodides in the presence of 10 mol % of Pd(PPh(3))(4) and 10 mol % of CuI in DMF at 80 °C for 10-20 h to give the cross-coupled products 3 in 35-97% yields. Further coupling reaction of 3 with arylstannanes in the presence of 5 mol % of Pd(PPh(3))(4) and 3 equiv of LiBr in DMF at 100 °C for 2-24 h afforded the desired products 5 in 25-78% yields.     

Copper-catalyzed halogen exchange in aryl halides: an aromatic Finkelstein reaction

A mild and general method for the conversion of aryl, heteroaryl, and vinyl bromides into the corresponding iodides was developed utilizing a catalyst system comprising 5 mol % of CuI and 10 mol % of a 1,2- or 1,3-diamine ligand. A variety of polar functional groups are tolerated, and even N-H containing substrates such as sulfonamides, amides, and indoles are compatible with the reaction conditions. Both the reaction rate and the equilibrium conversion of the aryl bromide depend on the choice of the halide salt and the solvent. The best results were obtained using NaI as the halide salt and dioxane, n-butanol, or n-pentanol as the solvents.