Synthesis of thiophene/phenylene co‐oligomers. IV. 6‐ to 8‐ring molecules

We report the synthesis of various thiophene/phenylene co‐oligomers with a total number of thiophene and benzene (phenylene) rings of 6 to 8. These compounds include a phenyl‐capped sexithiophene, a thienyl‐capped quaterphenylene, as well as block and alternating co‐oligomers. The synthesis is based on either the Suzuki coupling reaction or the direct dimerization coupling. The latter method produces symmetric molecules with an even total ring number. These reaction schemes enabled us to obtain the target compounds in high quality. Although the resulting materials are difficult to dissolve in organic solvents and therefore difficult to identify by usual ¹H nmr spectroscopy, they have successfully been identified through Fourier‐transform ir spectroscopy. The specific group frequencies of ring‐stretching and out‐of‐plane deformation modes are characteristic of the substitution pattern of the individual thiophene and benzene rings.     

Synthesis of thiophene/phenylene co‐oligomers. V. Functionalization at molecular terminals toward optoelectronic device applications

We report the synthesis of various thiophene/phenylene co‐oligomers with a total number of thiophene and benzene (phenylene) rings of 5 and 6 with various terminal groups. Those terminal groups have been chosen from among alkyl groups, methoxy groups, trifluoromethyl groups, and cyano groups. The molecular backbone of these compounds comprises phenyl‐ or biphenylyl‐capped thiophene (or oligothiophene) or an alternating co‐oligomer. The synthesis is based on either the Suzuki coupling reaction or the Negishi coupling reaction. These reaction schemes enabled us to obtain the target compounds in high quality. In particular, the latter coupling method turned out to produce the compounds at a high yield. The terminal groups are expected to produce various functionalities based upon their electron donating character (alkyl groups and methoxy groups) or electron withdrawing character (trifluoromethyl groups and cyano groups). Additionally some of these groups bring about enhanced solubility. This will lead to the production of a diversity of modified compounds of thiophene/phenylene co‐oligomers. To give an example that demonstrates usefulness of the target compounds, we present optoelectronic data that are associated with their device applications.     

Green Route for Rapid Synthesis of 2,2′-Dithiobis(benzothiazole) by Microwave Irradiation

A green route for rapid synthesis of 2,2′-dithiobis(benzothiazole) (DM) by microwave irradiation is discussed. The reaction time was shortened to 5 min, and the yield of product was good.     

Synthesis of thiophene/phenylene co‐oligomers. II [1]. Block and alternating co‐oligomers

We report the synthesis of block and alternating thiophene/phenylene co‐oligomers that is based either on the Suzuki coupling reaction or on the Grignard reaction. These reaction schemes enable us to obtain the target compounds at reasonably high yields. The resulting materials have been fully characterized through the solid‐state ¹³C nmr and Fourier‐transform ir as well as the ¹H nmr. Of these, the solid‐state ¹³C nmr and ir are particularly useful in characterizing the materials of higher molecular weight, since those materials are difficult to dissolve in organic solvents.     

Thiophene-thiophene versus phenyl-phenyl coupling in 2-(Diphenylamino)-Thiophenes: an ESR-UV/Vis/NIR spectroelectrochemical study.

The oxidation of several 2-diphenylamino-substituted thiophenes and N,N'-bis(2-diphenylamino-5-thienyl)-substituted phenylene-1,4-diamines with different substitution patterns in the 5-position of their thiophene moieties was studied by cyclovoltammetric and spectroelectrochemical measurements (ESR, UV/Vis/NIR). These measurements revealed both the structure of the oxidation products obtained and that of their cationic intermediates, as well as the pathway of their formation and follow-up reactions. Thus, the formation of the radical cations in the first electrochemical oxidation step of the target molecules was demonstrated. Depending on the substitution pattern, these radical cations give rise to several consecutive processes to a different extent. Thus radical dimers, dehydrodimers with a 2,2-bithiophene, 3,3'-bithiophene, or benzidine structure, as well as radical monocationic and dicationic products can be formed. For N,N'-bis(2-diphenylamino-5-thienyl)-substituted phenylene-1,4-diamines rather stable radical cations and dications were primarily formed and unambiguously identified. These species were transformed into 2,2'-bithiophene dimers and oligomers when the 5-position of the thiophene moiety was unsubstituted. By in situ spectroelectrochemistry the influence of the substituents on the type of coupling reactions can be demonstrated and followed in detail.     

CaO as Drop‐In Colloidal Catalysts for the Synthesis of Higher Polyglycerols

Glycerol is an attractive renewable building block for the synthesis of polyglycerols, which find application in the cosmetic and pharmaceutical industries. The selective etherification of glycerol to higher oligomers was studied in the presence of CaO colloids and the data are compared with those obtained from NaOH and CaO. The materials were prepared by dispersing CaO, CaCO₃, or Ca(OH)₂ onto a carbon nanofiber (CNF) support. Colloidal nanoparticles were subsequently dispensed from the CNF into the reaction mixture to give CaO colloids that have a higher activity than equimolar amounts of bulk CaO and NaOH. Optimization of the reaction conditions allowed us to obtain a product with Gardner color number <2, containing no acrolein and minimal cyclic byproducts. The differences in the CaO colloids originating from CNF and bulk CaO were probed using light scattering and conductivity measurements. The results confirmed that the higher activity of the colloids originating from CaO/CNF was due to their more rapid formation and smaller size compared with colloids from bulk CaO. We thus have developed a practical method for the synthesis of polyglycerols containing low amounts of Ca.     

Selective Synthesis of Partially Protected Nonsymmetric Biphenols by Reagent‐ and Metal‐Free Anodic Cross‐Coupling Reaction

The oxidative cross‐coupling of aromatic substrates without the necessity of leaving groups or catalysts is described. The selective formation of partially protected nonsymmetric 2,2′‐biphenols via electroorganic synthesis was accomplished with a high yield of isolated product. Since electric current is employed as the terminal oxidant, the reaction is reagent‐free; no reagent waste is generated as only electrons are involved. The reaction is conducted in an undivided cell, and is suitable for scale‐up and inherently safe. The implementation of O‐silyl‐protected phenols in this transformation results in both significantly enhanced yields and higher selectivity for the desired nonsymmetric 2,2′‐biphenols. The use of a bulky silyl group to block one hydroxyl moiety makes the final product less prone to oxidation. Furthermore, the partially silyl‐protected 2,2′‐biphenols are versatile building blocks that usually require tedious or low‐yielding synthetic pathways. Additionally, this strategy facilitates a large variety of new substrate combinations for oxidative cross‐coupling reactions.     

金属醋酸盐催化合成聚丁二酸乙二醇酯预聚体和碳酸二甲酯

研究了醋酸盐催化碳酸乙烯酯（EC）和丁二酸二甲酯（DS）同时合成聚丁二酸乙二醇酯 (PES) 预聚体和碳酸二甲酯(DMC)的耦合反应新工艺。 采用气相色谱-质谱联用定性分析馏分组成;红外光谱、核磁共振表征了预聚物的结构;采用乌式粘度计测试了预聚物的特性粘数;气相色谱定量测定馏分碳酸二甲酯的收率以考察耦合反应的进度。 以对该反应催化效果最佳的无水醋酸锂为催化剂考察了物料配比、反应温度、反应时间、催化剂用量对耦合反应的影响,结果表明,最佳的工艺条件为：反应温度195～200 ℃,n(EC)∶n(DS)=2∶1,n(cat)∶n(EC+DS)=0.02∶1,反应时间为2 h,耦合反应所得的DMC收率为48.0%,聚丁二酸乙二醇酯预聚物的特性粘数为0.3787。     

Convergent synthesis of oligomers of triazole-linked DNA analogue (DNA) in solution phase

A convergent route for the solution-phase synthesis of oligomeric triazole-linked analogues of DNA (^TLDNA) has been developed. A one-pot procedure for desilylation of masked acetylene and the ensuing copper-catalyzed Huisgen coupling reaction between oligomers allowed the solution-phase synthesis of 7-mer and 8-mer ^TLDNA in good yield.     

Towards a general solid phase approach for the iterative synthesis of conjugated oligomers using a germanium based linker--first solid phase synthesis of an oligo-(triarylamine)

The development of a germanium-based linker system for the solid phase synthesis (SPS) of 3-(n-hexyl)thiophene oligomers and the first SPS of triarylamine oligomers via iterative chain extension is described. The efficiency of the key steps in the oligomer syntheses and their compatibility with the germanium linker are demonstrated by the SPS of bi-[3-(n-hexyl)thiophene] 19 and ter-(triarylamine) 50. The use of a germanium-based linker in combination with appropriately selected silicon-based blocking/protecting groups allows double coupling to drive the key cross coupling steps to completion hence minimising deletion sequences and also allows for traceless and potentially functionalisative cleavage from the resin. The latter feature has yet to be fully explored but towards this end the first ipso-borodegermylation reaction of a 2-germyl-3-(n-hexyl)thiophene is presented.     

14C-labeled and large-scale synthesis of the angiotensin-(1-7)-receptor agonist AVE 0991 by cross-coupling reactions

The synthesis of (14)C-labeled AVE 0991 ((14)()C-1a) and large-scale synthesis of AVE 0991 (1a) are described. In the key step of the synthesis, the C-C coupling reaction of the imidazole (2) and thiophene (3) building blocks was studied under Suzuki and Stille reaction conditions, respectively. Suzuki reaction gave only moderate yields, whereas the best results were obtained under Stille reaction conditions with up to 64% yield.     

Reactions of polymers having β-alkoxyenoate moieties in the main chain

The hydrolysis and the substitution reaction of the main chain of the polymer having β-alkoxyenoate moieties in the main chain are described. The hydrolysis of the polymer prepared from 2,2-dimetylpropylene-1,3-bis(propiolate) and p-xylene glycol under acidic conditions proceeded smoothly to obtain diols in quantitative yield by the cleavage of both ester and vinyl ether moieties. On the other hand, carboxylic acids were obtained by the hydrolysis of the polymer under alkaline conditions. The aminolysis with pyrrolidine gave the β-aminoenoate by the selective fission of vinyl ether moieties in quantitative yield. Furthermore, a polymer having β-aminoenoate moieties in the main chain was obtained by the reaction with piperazine via the displacement of the main chain. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 787–793, 1997     

1,3,2-Diazaborolyl-functionalized thiophenes and dithiophenes: synthesis, structure, electrochemistry and luminescence

Reaction of 2-bromo-1,3-diethyl-1,3,2-benzodiazaborole (1) with equimolar amounts of thienyl lithium or 2,2-dithienyl lithium led to the generation of benzodiazaboroles 2 and 3 which are functionalized at the boron atom by a 2-thienyl or a 5-(2,2-dithienyl) unit. Similarly 2-bromo-1,3-diethyl-1,3,2-naphthodiazaborole (4) and thienyl lithium or 2,2-dithienyl lithium afforded the naphthoborolyl-substituted thiophene 5 or dithiophene 6. Treatment of 2,5-bis(dibromoboryl)-thiophene 7 with 2 eq. of tBuN=CH-CH=NtBu in n-hexane followed by sodium amalgam reduction of the obtained bis(diazaborolium) salt 8 gave the 2,5-bis(diazaborolyl)thiophene 9. The 2,5-bis(diazaborolidinyl)-thiophene 10 resulted from the cyclocondensation of 7 with 2 eq. of N,N-di-tert-butylethylenediamine in the presence of NEt3. Analogously, cyclocondensation of 7 with N,N-diethylphenylenediamine gave the bis(benzodiazaborolyl) functionalized thiophene 11. The novel compounds were characterized by elemental analysis and spectroscopy (1H-, 11B-, 13C-NMR, MS and UV-VIS). The molecular structure of 3 was elucidated by X-ray diffraction. Cyclovoltammograms show an irreversible oxidation wave at 298-598 vs. Fc/Fc+. The borolylated thiophenes and dithienyls show intense blue luminescence with Stokes shifts of 30-107 nm.     

Solution-phase microwave-assisted synthesis of unsubstituted and modified alpha-quinque- and sexithiophenes

The facile synthesis of poorly soluble unsubstituted and modified alpha-quinque- and sexithiophenes under microwave irradiation in the liquid phase is described. The use of microwave irradiation allowed these compounds to be prepared in a few minutes and at high yields by means of the Suzuki cross-coupling reaction. Unsubstituted sexithiophene was obtained in 10 min via the one-pot borylation/Suzuki reaction, purified according to a very simple procedure, and isolated in 84% yield. The efficient synthesis of two new methylated quinque- and sexithiophenes displaying liquid crystalline properties is reported. A new microwave-assisted methodology for the conversion of aldehyde-terminated quinque- and sexithiophenes into the corresponding cyano derivatives is also described. The use of microwaves was extended to the Sonogashira coupling reaction and found to be very effective in the preparation of a quinquethiophene containing acetylenic spacers. The electronic and optical characterization of this compound is reported and discussed in relation to that of unsubstituted quinquethiophene.     

Characterization of Conducting Copolymer of Thiophene via Pyrolysis Mass Spectrometry

In this work, structural and thermal characterization of a conducting copolymer of thiophene (PTh) with 2‐methylbutyl‐2‐(3‐thienyl)acetate prepared by two different methods has been performed by pyrolysis mass spectrometry techniques. The pyrolysis mass spectrometry data of both components of the copolymer, polythiophene, PTh, poly(2‐methylbutyl‐2‐(3‐thienyl)acetate), PMBTA and PTh/PMBTA have been analyzed and compared. It has been determined that when the electrochemical polymerization of thiophene was achieved on PMBTA coated anode through the thiophene moieties of PMBTA, characteristics of both PTh and PMBTA were retained to a certin extent. However, when thiophene was polymerized in the presence of MBTA, a polymer film with lower conductivity, but more uniform structure, was produced.     

Preparation and characterisation of a quinone-functionalised polythiophene film on a modified electrode. Application to the potentiometric determination of glutathione and cysteine concentrations

The new compound 3-((2,5-dimethoxyphenyl)ethynyl)thiophene has been synthesised by Sonogashira coupling. A modified electrode coated with a polythiophene film bearing a quinone moiety was obtained by electropolymerisation of the thienyl group followed by anodic oxidation of para-dimethoxyphenyl group. The cyclovoltammetric response resulting from the reaction of glutathione with the benzoquinone moiety was investigated. The responses of the modified electrode as a new potentiometric sensor of reduced thiols are proposed.     

Synthesis of Thiophene‐Based π‐Conjugated Oligomers via Ligand‐Enabled Pd‐Catalyzed Suzuki–Miyaura Coupling of Haloterthienyls

A ligand‐enabled Pd‐catalyzed Suzuki–Miyaura coupling of haloterthienyls for the synthesis of various thiophene‐based π‐conjugated oligomers including quinquethiophenes is demonstrated. An indolyl phosphine ligand plays an important role in this transformation. Thiopheneboronic acids were well applied, which might open up a window for the application of thiopheneboronic acids in the synthesis of thiophene‐based π‐conjugated oligomers in materials chemistry.     

2-噻吩基苯酚的合成优化

以廉价的2-溴苯甲醚制取了格氏试剂,通过Kumada偶联反应得到2-噻吩基苯甲醚,再通过吡啶盐酸盐脱甲基得到2-噻吩基苯酚。从催化剂、配体、溶剂等方面对Kumada偶联反应进行了筛选和优化,结果表明Kumada偶联反应时,72℃以Pd（dppf）Cl2（0.001 mol）为催化剂（dppf,二茂铁）,三苯基膦（PPh3）和1,1’-双（二苯基膦）二茂铁（dppf）作为配体,四氢呋喃和乙二醇二甲醚为混合溶剂,反应16 h,得到2-噻吩基苯甲醚,纯度95%,产率65%。再通过吡啶盐酸盐脱甲基得到2-噻吩基苯酚,纯度大于98%,产率65%。该方法原料便宜,后处理简单,收率较高。     

2,2′‐Bi[benzo[b]thiophene]: an unexpected isolation of the benzo[b]thiophene dimer

The crystal structure of 2,2′‐bi[benzo[b]thiophene], C₁₆H₁₀S₂, at 173 K has triclinic (P) symmetry. It is of interest with respect to its apparent mode of synthesis, as it is a by‐product of a Stille cross‐coupling reaction in which it was not explictly detected by spectroscopic methods. It was upon crystal structure analysis of a specimen isolated from the mother liquor that this reaction was determined to give rise to the title compound, which is a dimer arising from the starting material. Two independent half‐molecules of this dimer comprise the asymmetric unit, and the full molecules are generated via inversion centers. Both molecules in the unit cell exhibit ring disorder, and they are essentially identical because of their rigidity and planarity.     

Synthesis of polymers with isolated thiophene–arylidene–thiophene chromophores for enhanced and specific electron/hole transport

The synthesis of nine new polymers intended for future use in light‐emitting diodes is described. The polymers consist of alternating units of thiophene–arylidene–thiophene chromophores and saturated silicon‐containing spacers. The arylidene moieties include benzene‐1,4‐, 2,5‐dimethoxybenzene‐1,4‐, naphthalene‐1,4‐, anthracene‐9,10‐, pyridine‐2,5‐, pyridine‐2,6‐, N‐methylcarbazole‐3,6‐, 1,3,4‐oxadiazole‐2,5‐, and 4,4′‐dimethyl‐2,2′‐bithiazole‐5,5′‐. The syntheses involved dibromination of the central arene followed by Suzuki or Kumada cross‐coupling reactions with two thiophene units. Subsequent dilithiation and reaction with dihalosilylalkanes provided the polymers. Their optical properties, including ultraviolet–visible absorption and emission in solution, were comparable to those of the parent monomer units, and they possessed the physical characteristics of macromolecules. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 872–879, 2001