Reductive carbonylation of nitrobenzene to phenylurethane catalyzed by Ru(III)-schiff base complexes

Ruthenium complexes containing Schiff bases with N₂O₂, N₄ and N₅ donor groups with the general formula [Ru^III(X)Cl_{1 or 2}], where X = Schiff base such as bis(salicylaldehyde)-o-phenylenediimine (saloph), bis(salicylaldehyde)ethylenediimine (salen), bis(picolaldehyde)ethylenediimine (picen), bis(picolaldehyde)-o-phenylenediimine (pic-opd), bis(picolaldehyde)diethylenetriimine (pic-dien), were tested for their catalytic activity towards the reductive carbonylation of nitrobenzene in ethanol to give phenylurethane. The five Ru(III) complexes tested towards reductive carbonylation showed different catalytic activities in the range 160 – 200 °C and CO partial pressure of 15 atm.Among the complexes tested, [Ru(saloph)Cl₂] showed the highest catalytic activity with a turnover rate greater than 80 mol product per mol catalyst per hour at 160 °C and 15 atm CO. [Ru(pic-en)Cl₂]Cl and [Ru(picopd)Cl₂]Cl complexes with N₄ donor systems were found to be less active towards carbonylation of nitrobenzene, as indicated by their turnover rates of 20 and 15 mol product per mol catalyst per hour, respectively, at 200 °C and 15 atm CO. The complex [Ru(pic-dien)Cl]Cl₂N₅ donor system was completely inactive even at 200 °C and 15 atm CO, and no conversion of nitrobenzene was seen even after 12 h contact time.     

Coumarin salen-based zinc complex for solvent-free ring opening polymerization of ε-caprolactone

A new zinc complex based on a tetradentate N,N,O,O-type coumarin salen ligand (H₂L) was prepared and characterized by elemental analysis, thermogravimetric analysis (TGA), and FT-IR, UV–vis and ¹H NMR spectroscopy. The complex [Zn(L)(H₂O)]·H₂O was active in the ring opening polymerization (ROP) of ε-caprolactone under solvent-free conditions, producing polycaprolactone (PCL) with a molecular weight up to 17,700 g mol^?1 and a narrow molecular weight distribution. ¹H NMR analysis showed that the PCL obtained was mainly linear, having hydroxymethylene groups in the chain ends. Differential scanning calorimetry (DSC) showed that the polymer had high crystallinity (61%) and that TGA had a decomposition temperature above 300 °C.     

Kinetics and mechanism of oxidation of N,N-bis(salicylaldehyde-1,2-diaminoethane) cobalt(II) by N-bromosuccinimide in aqueous acidic medium

The kinetics of oxidation of N,N-bis(salicylaldehyde-1,2-diaminoethane) cobalt(II) complex by N-bromosuccinimide (NBS) in aqueous acid and H₂O–MeOH solvent mixtures were studied spectrophotometrically over the 20–40 °C range, 0.1–0.5 mol dm^?3 ionic strength, 2.2–2.8 pH range and 0–40 wt% MeOH–H₂O solvent mixtures for a range of NBS and complex concentrations. The rate shows first-order dependence on both [NBS] and [complex] and decreases with pH over the range studied. The protonated form of N-bromosuccinimide was identified as the main reactive species. An inner-sphere mechanism involving free radicals is proposed.     

Crystal structure and thermal behavior of a chromium-piperazinium phosphate

(C₄N₂H₁₂)CrO(H_1.5PO₄)₂·H₂O has been synthesized hydrothermally using piperazine as organic template. Its crystal structure was solved ab initio using synchrotron powder X-ray diffraction data [monoclinic, a = 16.9649(4) Å, b = 9.8609(2) Å, c = 7.14375(14) Å, and β = 94.896(3)°, space group P2₁/a, Z = 4]. 1D structure is composed by isolated infinite anionic chains [CrO(H_1.5PO₄)₂]_n (vertex-sharing {CrO₆} octahedra joined by phosphate moieties). Their 2D plate-like morphology is propitiated by a very strong inter-chain interaction (P–O···H···O–P symmetric hydrogen bonds). KAS isoconversional method was applied to determine the activation energy for both thermal and thermo-oxidative decomposition of (C₄N₂H₁₂)CrO(H_1.5PO₄)₂·H₂O.     

Synthesis,Crystal Structure and Magnetic Properties of a Two-Dimensional Heterometallic Assembly ∣[Mn(salen)]∣2∣[Ni(CN)4∣·1/2H2O

A heterometallic assembly, [Mn(salen)]₂[Ni(CN)₄ ]·1/2H₂O (where salen=N, N'-ethylene-bis(salicylideneiminato)-dianion), has been prepared from the reaction of [Mn(salen)H₂O]ClO₄ ·H₂O with K₂ [Ni(CN)₄ ]·H₂O in methanol/water. The compound crystallizes in the tetragonal space group P 4/ncc with the cell dimensions of a =14.604(2) Å, c =16.949(3) Å, and Z=4. The compound assumes a two-dimensional distorted square network structure, formed from Ni―CN―Mn(salen)―NC―Ni linkages with dimensions of Ni―C = 1.867(7)Å, Mn―N - 2.312(6) Å, Mn―N―C - 163.8(6)° Ni―C―N = 178.4(6)°. The two metal atoms Ni(II) and MN(III) have square and slightly distorted octahedral arrangements, respectively. Magnetic susceptibility measurements indicate the presence of an intramolecular antiferro-magnetic interaction and gives a Mn―Mn exchange integral of ?3.2cm^?1.     

Comparative potentiality of Kans grass (Saccharum spontaneum) and Giant reed (Arundo donax) as lignocellulosic feedstocks for the release of monomeric sugars by microwave/chemical pretreatment

Two-stage microwave (microwave/NaOH pretreatment followed by microwave/H₂SO₄ pretreatment) was used to release monomeric sugars from Kans grass (Saccharum spontaneum) and Giant reed (Arundo donax). The optimum pretreatment conditions were investigated, and the maximum monomeric sugar yields were compared. The microwave-assisted NaOH and H₂SO₄ pretreatments with a 15:1 liquid-to-solid ratio were studied by varying the chemical concentration, reaction temperature, and reaction time to optimize the amount of monomeric sugars. The maximum amounts of monomeric sugars released from microwave-assisted NaOH pretreatment were 6.8 g/100 g of biomass [at 80 °C/5 min, 5 % (w/v) NaOH for S. spontaneum and at 120 °C/5 min, 5 % (w/v) NaOH for A. donax]. Furthermore, the maximum amounts of monomeric sugars released from microwave-assisted H₂SO₄ pretreatment of S. spontaneum and A. donax were 33.8 [at 200 °C/10 min, 0.5 % (w/v) H₂SO₄] and 31.9 [at 180 °C/30 min, 0.5 % (w/v) H₂SO₄] g/100 g of biomass, respectively. The structural changes of S. spontaneum and A. donax were characterized using Fourier transform infrared spectroscopy and scanning electron microscopy.     

Mass spectrometric study of the overheated vapor over nickel(II), Copper(II), and Zinc(II) <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′-Ethylenebis(salicylaldiminato) complexes

A mass spectrometric study of the overheated vapor over the nickel(II), copper(II), and zinc(II) N,N′-ethylenebis(salicylaldiminato) complexes between 300 and 865°C has been carried out. Throughout this temperature range, the overheated vapor over all of the complexes contains no ions heavier than the molecular ion [MO₂N₂C₁₆H₁₄]⁺. At ∼600°C, Cu(salen) and Zn(salen) interact with the structural material of the double-chamber two-temperature effusion cell (Kh18N10T steel). The complexes are thermally very stable. The fragmentation pattern of the chelates under electron-impact ionization is metal-dependent.     

Kinetics and mechanism of the reduction of μ-adi-di[N,N′-bis{salicylideneethylenediaminatoiron(III)}] by dithionate ion

The kinetics and mechanism of the reduction of the μ-adi-di[N,N′-bis{salicylideneethylenediaminatoiron(III)}] complex, [Fe₂adi], by dithionate ion, S₂O₆ ^2?, have been investigated in aqueous perchloric acid at 29 °C, I = 0.05 mol dm^?3 (NaClO₄) and [H⁺] = 5.0 × 10^?3 mol dm^?3. Spectrophotometric titrations indicated that one mole of the reductant was oxidized per mole of oxidant. Kinetic profiles indicated first-order rate with respect to [Fe₂adi] but zeroth-order dependence on [S₂O₆ ^2?]. The rate of reaction increased with increase in [H⁺], decreased with increased dielectric constant, but was invariant to changes in ionic strength of the medium. Addition of small amounts of AcO^? and Mg²⁺ ions did not catalyse the reaction. A least-squares fit of rate against [H⁺]² was linear (r ² = 0.984) without intercept. The reaction was analysed on the basis of a proton-coupled outer-sphere electron transfer mechanism.     

Effects of various fire-extinguishing reagents for thermal hazard of triacetone triperoxide (TATP) by DSC/TG

Acetone, hydrogen peroxide (H₂O₂), and sulfuric acid (H₂SO₄) are easily to produce triacetone triperoxide (TATP), which is an organic peroxide and a hazardous material. The aim of this study was to analyze the thermal hazard of various fire-extinguishing reagents mixed with TATP. Various functions of fire-extinguishing reagents may have different extent of reactions with TATP. Differential scanning calorimetry (DSC) and thermogravimetric analyzer (TG) were used to detect the thermal hazard and to evaluate the effect of fire-extinguishing reagents mixed with TATP under fire condition. TATP decomposed rapidly and final decomposition was calculated before 200 °C. Therefore, heat of decomposition (ΔH _d) of TATP was evaluated to be 2,500 J g^?1 by DSC under 2 °C min^?1 of heating rate. H₂O₂, acetone, and H₂SO₄ should not be mixed in a wastewater drum. TATP decomposed at 50 °C by DSC using O₂ of reaction gas that is an exothermic reaction and can decompose a large amount of heat. Therefore, TATP was applied to assess thermal pyrolysis by DSC employing N₂ of reaction gas that can analyze an endothermic reaction. Mass loss percentage of TATP was evaluated to be 100 % when the ambient temperature exceeds 110 °C by TG using O₂ or N₂ of reaction gas.     

Preparation and characterization of an active catalyst

As an active catalyst to promote thermolysis of ammonium perchlorate (AP), potassium lead hexanitrocobaltate(II) complex (K₂Pb[Co(NO₂)₆]) was synthesized by the direct deposition method and inverse microemulsion method. Its submicron, size, cube morphology, and crystal structure were investigated by SEM, TEM, and XRD analysis, respectively. Thermal decomposition of K₂Pb[Co(NO₂)₆] was studied by the TG/DSC-IR online system and XRD analysis. The catalyst was decomposed at about 300 °C; its gaseous products were NO₂, NO, and N₂O and its solid products were Pb₃O₄, Co₃O₄, PbO, CoO, and KNO₂. Because thermal decomposition of the catalyst was synchronous with low temperature decomposition of AP, thermolysis of AP was promoted remarkably. In particular, the gaseous products (NO _x ) could directly oxidize the absorbed NH₃. As a result, compared to the data of pure AP, the integral heat of AP added 3.0 wt% of the catalyst multiplied by 280 %, the maximum rate of heat release increased by 634 %. The decomposition of catalyzed AP ended at about 317 °C, at which only less than 30 % of pure AP decomposed.     

Formation and Dissociation of Phosphorylated Peptide Radical Cations

In this study, we generated phosphoserine- and phosphothreonine-containing peptide radical cations through low-energy collision-induced dissociation (CID) of the ternary metal?Cligand phosphorylated peptide complexes [Cu^II(terpy) _p M]^·2+ and [Co^III(salen) _p M]^·+ [ _p M: phosphorylated angiotensin III derivative; terpy: 2,2':6',2''-terpyridine; salen: N,N '-ethylenebis(salicylideneiminato)]. Subsequent CID of the phosphorylated peptide radical cations ( _p M^·+) revealed fascinating gas-phase radical chemistry, yielding (1) charge-directed b- and y-type product ions, (2) radical-driven product ions through cleavages of peptide backbones and side chains, and (3) different degrees of formation of [M ?C H₃PO₄]^·+ species through phosphate ester bond cleavage. The CID spectra of the _p M^·+ species and their non-phosphorylated analogues featured fragment ions of similar sequence, suggesting that the phosphoryl group did not play a significant role in the fragmentation of the peptide backbone or side chain. The extent of neutral H₃PO₄ loss was influenced by the peptide sequence and the initial sites of the charge and radical. A preliminary density functional theory study, at the B3LYP 6-311++G(d,p) level of theory, of the neutral loss of H₃PO₄ from a prototypical model??N-acetylphosphorylserine methylamide??revealed several factors governing the elimination of neutral phosphoryl groups through charge- and radical-induced mechanisms.     

Synthesis and molecular structure of Cr(salen)(μ‐N)RhCl(COD): the first example of a heterobimetallic nitride‐bridged complex containing chromium

Five‐coordinate Cr(N)(salen) {salen is 2,2′‐[ethane‐1,2‐diylbis(nitrilomethylidyne)]diphenolate} reacts with [RhCl(COD)]₂ (COD is 1,5‐cyclooctadiene) to yield the heterobimetallic nitride‐bridged title compound, namely chlorido‐2κCl‐[2(η⁴)‐1,5‐cyclooctadiene]{2,2′‐[ethane‐1,2‐diylbis(nitrilomethylidyne)]diphenolato‐1κ⁴O,N,N′,O′}‐μ‐nitrido‐1:2κ²N:N‐chromium(V)rhodium(I), [CrRh(C₁₆H₁₄N₂O₂)ClN(C₈H₁₂)]. The Cr—N bond of 1.5936 (14) Å is elongated by only 0.035 Å compared to the terminal Cr—N bond in the precursor. The nitride bridge is close to being linear [173.03 (9)°] and the Rh—N bond of 1.9594 (14) Å is very short for a monodentate nitrogen‐donor ligand, indicating significant π‐acceptor character of the Cr[triple‐bond]N group.     

Syntheses of polyfluorophenylcobalt(III) schiff base complexes using organothallium reagents

The complexes RCo(acacen) [R = C₆F₅, p-HC₆F₄, or o-HC₆F₄; H₂acacen = N,N′-ethylenebis(acetylacetonimine)] and RCo(salen) [R = C₆F₅ or p-HC₆F₄; H₂salen = N,N′-ethylenebis(salicylaldimine)] have been prepared by reaction between Co(acacen) or Co(salen) and the appropriate bromobis(polyfluorophenyl)thallium(III) compounds, and have been isolated as pyridinates. Spectroscopic evidence for formation of C₆F₅Co(salophen) [H₂salophen = _N,N′-o-phenylenebis(salicylaldimine)] has also been obtained. The reactivity of the thallium compounds increased in the sequence Ph₂TlBr ? (o-HC₆F₄)2TlBr < (p-HC₆F₄)₂TlBr < (C₆F₅)₂TlBr, and of the cobalt complexes in the sequence Co(salophen) < Co(salen) < Co(acacen). Possible mechanisms are discussed.     

Electrochemistry of organometallic compounds: Part III. Oxidations of methyl derivatives of organocobalt(III) complexes with delocalized electronic structure in dimethylformamide

The influence of the equatorial ligand on the electrochemical oxidation of the compounds [H₃CCo(chel)B], where chel is bis (dimethylglyoximato), (DH)₂; bis(salicylaldehyde)ethylenediimine, salen; bis(salicylaldehyde) o-phenylenediimine, salophen; bis(salicylaldehyde)cyclohexylenediimine, salcn; bis(acetylacetone) ethylenediimine, bae; and where B is pyridine when chel is (DH₂), and dimethylformamide (DMF) when chel represents a Schiff base (salen, salcn, salophen and bae), was studied by means of cyclic voltammetry in DMF, 0.2 M in tetraethylammonium perchlorate, between 25 and ?25°C, with a platinum disk working electrode. Absorption spectra in the visible and near ultraviolet regions for these compounds in DMF at 25°C were obtained. The complexes exhibit a reversible one-electron oxidation, at ?20°C with scan rates >0.5 V s^?; chemical reactions following electron transfer are not detected under these conditions. At slower potential or higher temperatures, the oxidized product decomposes chemically in a solvent-assisted (or nucleophile-assisted) reaction, yielding products which are electroactive in the applied potential range. The behavior of the [H₃CCo (DH₂)py] derivative is better described as a quasi-reversible charge transfer followed by an irreversible chemical reaction. Experimental evidence suggests that in the case of the [H₃CCo(bae)] derivative at ?20°C, the reactive -species is pentacoordinated and weakly adsorbed at the electrode surface. The value of E${}_1\text{2}$ and the energies of the first two absorption bands in the visible spectra reveal the ability of the studied complexes to donate and to delocalize electronic charge.     

{Bis[N,N′-(2-alkyl-6-para-methylphenyl)phenyl)imino]acenaphthene}dibromonickel catalysts bearing bulky methylphenyl groups: synthesis,characterization, crystal structures and application in catalytic polymerization of ethylene and styrene

Two new Ni(II) complexes containing methylphenyl groups, {bis[N,N′-(2,6-dimethyl-4-p-methylphenylphenyl)imino]acenaphthene}dibromonickel 4a and {bis[N,N′-(2-ethyl-4,6-di(p-methylphenyl)phenyl)imino]acenaphthene}dibromonickel 4b, were synthesized and characterized. The molecular structures of both complexes were determined by single-crystal X-ray diffraction. Both complexes have pseudo-tetrahedral geometry about the nickel center, showing pseudo C _2v and C ₂ molecular symmetry, respectively. Complex 4c, {bis[N,N′-(2,4,6-trimethylphenyl)imino]acenaphthene}dibromonickel, was also synthesized for comparison. These complexes were tested as catalysts for the polymerization of ethylene and styrene under mild conditions using diethylaluminum chloride. The precatalyst 4b bearing one ortho-ethyl group and two bulky p-methylphenyl groups in the ortho- and para-aryl position of the ligand, displayed highly catalytic activity for the polymerization of ethylene [4.70 × 10⁶ g PE/(mol Ni h bar)], and produced branched polyethylene (76 methyl, 8 ethyl, 5 propyl and 22 butyl or longer branches/1,000 C at 60 °C). Interestingly, complex 4b also displays high catalytic activity [5.46 × 10⁵ g polystyrene/(mol Ni·h)] for styrene polymerization and produces nearly atactic polystyrene at 70 °C (stereo-triad distributions: rr, 39.9 %; mr, 30.4 %; mm, 29.8 %; stereo-diad distributions: r, 55.1 %; m, 44.9 %).     

Hydrothermal Synthesis,Crystal Structure,and Catalytic Performance of Four Organic–Inorganic Hybrids Based on Polyoxometalates and O/N-Containing Groups

Four new network organic–inorganic hybrid supramolecular compounds [PW₁₂O₄₀](C₂H₄N₃)₃·6H₂O (1), [PMo₁₂O₄₀](C₂H₄N₃)₃·6H₂O (2), [H₄SiW₁₂O₄₀]₈[C₆NO₂H₄]₄[C₆NO₂H₅]₁₆[C₅NH₆]₄·39H₂O (3) and [H₃VW₁₂O₄₀] (C₆H₆NO₂)₂(CHO₂)₂·4H₂O (4) composed by keggin type heteropolyanion and O/N-containing organic groups of 1H-1,2,4-Triazole or 2,3-Pyridinedicarboxylic acid have been successfully synthesized by hydrothermally method, and characterized by infrared spectrum (IR), thermogravimetric–differentialthermal analysis (TG–DTA), cyclic voltammetry (CV) and single crystal X-ray diffraction (XRD). Compounds 1–4 exhibit three dimensional supramolecular network via hydrogen bonds and/or π–π stacking interactions. These compounds exhibit good thermal stability and catalytic ability. They are active for catalytic oxidation of methanol in a continuous-flow fixed-bed micro-reactor, when the initial concentration of methanol is 2.5 g m^?3 in air and flow rate is 10 mL min^?1, the corresponding elimination rates of methanol are 65% (125 °C), 85% (125 °C), 94% (150 °C), and 80% (125 °C), respectively.     

Trimellitate complexes of divalent transition metals with hydrazinium cation

New dihydrazinium divalent transition metal trimellitate hydrates of empirical formula (N₂H₅)₂M(Html)₂·nH₂O, where n = 1 for M = Co or Ni, and n = 2 for M = Mn, Zn, or Cd (H₃tml = trimellitic acid), and monohydrazinium cadmium trimellitate, [(N₂H₅)Cd(Html)_1.5·2H₂O] have been prepared and characterized by physico-chemical methods. Electronic spectroscopic, and magnetic moment data suggest that Co and Ni complexes adopt an octahedral geometry. The IR spectra confirm the presence of monodentate carboxylate anion (Δν = ν_asy(COO^?) ? ν_sym(COO^?) > 190 cm^?1) and coordinated N₂H₅ ⁺ ion (ν_N–N 1015 ? 990 cm^?1) in all the complexes. All the complexes undergo endothermic decomposition eliminating CO₂ in the temperature region 200–250 °C, followed by exothermic decomposition (in the range of 500–570 °C) of organic moiety to give the respective metal carbonate as the end products except nickel and cobalt complexes, which leave respective metal oxides. X-ray powder diffraction patterns reveal that Ni and Co complexes are isomorphous as are those of, Zn(II) and Cd(II) of the type, (N₂H₅)₂M(Html)₂·2H₂O.     

Kinetic parameters for thermal decomposition of hydrazine

The propulsion of most of the operating satellites comprises monopropellant (hydrazine––N₂H₄) or bipropellant (monometilydrazine—MMH and nitrogen tetroxide) chemical systems. When some sample of the propellant tested fails, the entire sample lot shall be rejected, and this action has turned into a health problem due to the high toxicity of N₂H₄. Thus, it is interesting to know hydrazine thermal behavior in several storage conditions. The kinetic parameters for thermal decomposition of hydrazine in oxygen and nitrogen atmospheres were determined by Capela–Ribeiro nonlinear isoconversional method. From TG data at heating rates of 5, 10, and 20 °C min^?1, kinetic parameters could be determined in nitrogen (E = 47.3 ± 3.1 kJ mol^?1, lnA = 14.2 ± 0.9 and T _b = 69 °C) and oxygen (E = 64.9 ± 8.6 kJ mol^?1, lnA = 20.7 ± 3.1 and T _b = 75 °C) atmospheres. It was not possible to identify a specific kinetic model for hydrazine thermal decomposition due to high heterogeneity in reaction; however, experimental f(α)g(α) master-plot curves were closed to F _1/3 model.     

Calorimetric investigation of the complex formation reaction of 18-crown-6 ether with d,l-alanine in water–ethanol mixtures

The standard thermodynamic parameters (Δ_r G°, Δ_r H°, and TΔ_r S°) of the reaction of molecular complex formation of 18-crown-6 ether (18C6) with d,l-alanine (Ala), [Ala18C6], have been obtained from calorimetric titration experiments carried out using the microcalorimetric system TAM III (TA Instruments, USA) at T = 298.15 K in water–ethanol (H₂O–EtOH) solvents at X _EtOH = 0 ÷ 0.6 mol fractions. Results show that the increase of the EtOH concentration in solvent brings about an increase of the [Ala18C6] complex stability and of the exothermicity of the reaction of complex formation. The solvation contributions of 18C6, Ala, [Ala18C6] to Δ_r G° and Δ_r H° at various X _EtOH values are also analyzed.     

In Situ: 2-D Inorganic Layer Lead-MOF Built from [(<Emphasis Type="Italic">μ</Emphasis><Subscript>4</Subscript>-O)Pb<Subscript>4</Subscript>] Core

In situ lead-MOF derived from 2-Methyl-3-acetylnaphtho[2,3-b]furan-4,9-dione (MAFD), [Pb₇O₂(OH)₂(1,2-BDC)₄(H₂O)] 1, 1,2-BDC = C₆H₄(COOH)₂, phthalic acid, has been synthesized and characterized by elemental analysis, IR, TG-DTA, powder X-ray diffraction (XRD) and single crystal X-ray diffraction. Compound 1 possesses 2-D inorganic layer structure built from rare tetranuclear unit [(μ ₄-O)Pb₄]. In 1, both crystallographic distinct Pb(1) and Pb(4) ions adopt six-coordination geometry, and the other two crystallographic distinct Pb(2) and Pb(3) ions display eight-coordination geometry under the condition of Pb–O bond length extended to 3.10 Å. A 3-D supramolecular network is also formed by hydrogen bonds (C–H···O). Result of photoluminescence measurement indicates an emission band at 385 nm (λ _excitation = 209 nm).