Polyol-assisted synthesis of TiO2 nanoparticles in a semi-aqueous solvent

TiO₂ (anatase and rutile) nanoparticles with an average crystallite size of 20-40 nm have been prepared at room temperature by polyol-mediated synthesis technique in a semi-aqueous solvent medium using titanium iso-propoxide as the titanium source, acetone as the oil phase and ethylene glycol as the stabilizer. Phase and microstructure of the resultant materials have been characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy and Raman spectroscopy. Photocatalytic degradation of acetaldehyde using TiO₂ nanoparticles was investigated by gas-chromatography technique.     

Preparation and characterization of nitrogen-doped TiO2 nanoparticles by the laser pyrolysis of N2O-containing gas mixtures

Nitrogen-doped TiO₂ nanoparticles have been prepared by the IR laser pyrolysis technique. A sensitized mixture of TiCl₄ (vapors) and N₂O was used as titanium and nitrogen precursors, respectively. The structural properties of the resultant N-doped nanoparticles such as the phase formation and the average particle size and distributions were investigated by X-ray diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy. The phase composition varied from almost pure anatase to mixtures of rutile and anatase. A decrease of the mean particle diameters from about 18 nm in case of the almost pure anatase sample to about 13 nm in case of the anatase-rutile mixture is observed. XPS analysis suggests and interstitial character of the doping process.     

Preparation of ultrafine TiO2 nanocrystals via pulsed-laser ablation of titanium metal in surfactant solution

This work reports the attempts to perform pulsed-laser ablation in a liquid medium for synthesizing oxide semiconductor nanocrystalline particles. Ultrafine TiO₂ nanoparticles were synthesized by pulsed-laser ablation of a titanium target immersed in an aqueous solution of surfactant sodium dodecyl sulfate (SDS) as well as in deionized water. The surfactant concentration dependence of TiO₂ nanocrystal formation was systematically characterized by X-ray diffraction, optical transmission spectroscopy, and transmission electron microscopy. The maximum amount of ultrafine anatase nanocrystalline particles (with mean size of 3 nm in diameter) was obtained in an aqueous solution of 0.01 M SDS. A probable formation process was proposed based on laser-induced reactive quenching at plasma-liquid interfaces and surfactant-mediated growth in a liquid solution. PACS 52.38.Mf; 52.50.Jm; 82.70.Uv; 81.07.Bc; 78.40.Fy     

Optical studies of samarium-doped fluoride nanoparticles

Samarium-doped calcium fluoride (CaF₂) nanoparticles were synthesized by the co-precipitation method and characterized by powder X-ray diffraction (PXRD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), optical absorption and photoluminescence (PL) techniques. The PXRD patterns confirmed the cubic crystallinity of the synthesized nanoparticles. The average particle size estimated using Scherer's formula was ～20?nm. The purity of the synthesized nanoparticles was confirmed by the FTIR spectrum. The morphological features studied using SEM revealed that the nanoparticles were agglomerated and porous. The optical absorption spectrum showed a strong and prominent absorption peak at ～264?nm and a weak one at ～212?nm. The PL spectrum showed broad and prominent emissions with peaks at ～387 and 532?nm along with weak emissions at 573 and 605?nm.     

Sonochemical synthesis and characterization of Co3O4 nanocrystals in the presence of the ionic liquid [EMIM][BF4]

For the first time, a sonochemical process has been used to synthesis cobalt oxide Co₃O₄ nanoflowers and nanorods morphology in the presence of the ionic liquid 1-Ethyl-3-methylimidazolium tetrafluoroborate [EMIM][BF₄] as reaction media and morphology template. Different sonication time periods and different molar ratios of the ionic liquid (IL) were used to investigate their effects on the structural, optical, chemical and magnetic properties of the produced Co₃O₄ nanoparticles. During synthesis process brown powder contains cobalt hydroxide Co(OH)₂ and cobalt oxyhydroxide (Cobalt hydroxide oxide) CoO(OH) was formed, after calcination in air for 4 h at 400 °C a black powder of Co₃O₄ nanoparticles was produced. The produced Co₃O₄ nanoparticles properties were characterized by X-ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM), transmission electron microscopy (TEM), FTIR spectroscopy, UV–vis spectroscopy, and Vibrating Sample Magnetometer (VSM). To explain the formation mechanism of Co₃O₄ NPs some investigations were carried on the brown powder before calcination.     

Influence of dopant level on structural, optical and magnetic properties of Co-doped anatase TiO2 nanoparticles

Cobalt-doped TiO₂ nanoparticles were synthesized by sol-gel method. The associated structural, optical, compositional and magnetic properties of the nanoparticles as a function of cobalt concentration have been systematically studied. The X-ray powder diffraction reveals that all samples have pure anatase phase tetragonal system and the lattice parameter analysis indicated that Co ions may substitute into the lattice of TiO₂. The average particle size is 15 nm, when found through transmission electron microscope. Optical spectroscopy measurement showed that the bandgap value decreases upon increasing Co concentration. The magnetic measurements revealed that the enhanced room temperature ferromagnetism (RTFM) strongly depends on the doping content.     

Nanoparticles of nickel oxide: growth and organization on zinc-substituted anionic clay matrix by one-pot route at room temperature

A room temperature nanocarving strategy is developed for the fabrication of nanoparticles of nickel oxide on zinc-substituted anionic clay matrix (Ni/ZnLDH). It is based on the growth and organization of nanoparticles of nickel oxide which occur during the structural reconstruction of the layered structure of the anionic clay in NiSO₄ aqueous solution. No organic compounds are used during the fabrication. The described material was characterized by X-ray diffraction (XRD), IR spectroscopy (FTIR), transmission electron microscopy (TEM), field-emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX) spectroscopy, and X-ray photoelectron spectroscopy (XPS). Results show that the nickel-clay nanoarchitecture consists of small nanoparticles of nickel oxide (average size 7 nm) deposited on the larger nanoparticles (average size 90 nm) of zinc-substituted clay. The optical properties of the new nickel-zinc formulation are studied by UV–Vis.     

Applications of polymeric micelles with tumor targeted in chemotherapy

The chitosan-coated magnetic nanoparticles (CS MNPs) were in situ synthesized by cross-linking method. In this method; during the adsorption of cationic chitosan molecules onto the surface of anionic magnetic nanoparticles (MNPs) with electrostatic interactions, tripolyphosphate (TPP) is added for ionic cross-linking of the chitosan molecules with each other. The characterization of synthesized nanoparticles was performed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS/ESCA), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), dynamic light scattering (DLS), thermal gravimetric analysis (TGA), and vibrating sample magnetometry (VSM) analyses. The XRD and XPS analyses proved that the synthesized iron oxide was magnetite (Fe₃O₄). The layer of chitosan on the magnetite surface was confirmed by FTIR. TEM results demonstrated a spherical morphology. In the synthesis, at higher NH₄OH concentrations, smaller sized nanoparticles were obtained. The average diameters were generally between 2 and 8?nm for CS MNPs in TEM and between 58 and 103?nm in DLS. The average diameters of bare MNPs were found as around 18?nm both in TEM and DLS. TGA results indicated that the chitosan content of CS MNPs were between 15 and 23?% by weight. Bare and CS MNPs were superparamagnetic. These nanoparticles were found non-cytotoxic on cancer cell lines (SiHa, HeLa). The synthesized MNPs have many potential applications in biomedicine including targeted drug delivery, magnetic resonance imaging?(MRI), and magnetic hyperthermia.     

Controlled flame synthesis of αFe<Subscript>2</Subscript>O<Subscript>3</Subscript> and Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles: effect of flame configuration,flame temperature,and additive loading

Superparamagnetic iron oxide nanoparticles are used in diverse applications, including optical magnetic recording, catalysts, gas sensors, targeted drug delivery, magnetic resonance imaging, and hyperthermic malignant cell therapy. Combustion synthesis of nanoparticles has significant advantages, including improved nanoparticle property control and commercial production rate capability with minimal post-processing. In the current study, superparamagnetic iron oxide nanoparticles were produced by flame synthesis using a coflow flame. The effect of flame configuration (diffusion and inverse diffusion), flame temperature, and additive loading on the final iron oxide nanoparticle morphology, elemental composition, and particle size were analyzed by transmission electron microscopy (TEM), high-resolution TEM (HR-TEM), energy dispersive spectroscopy (EDS), and Raman spectroscopy. The synthesized nanoparticles were primarily composed of two well known forms of iron oxide, namely hematite αFe₂O₃ and magnetite Fe₃O₄. We found that the synthesized nanoparticles were smaller (6–12 nm) for an inverse diffusion flame as compared to a diffusion flame configuration (50–60 nm) when CH₄, O₂, Ar, and N₂ gas flow rates were kept constant. In order to investigate the effect of flame temperature, CH₄, O₂, Ar gas flow rates were kept constant, and N₂ gas was added as a coolant to the system. TEM analysis of iron oxide nanoparticles synthesized using an inverse diffusion flame configuration with N₂ cooling demonstrated that particles no larger than 50–60 nm in diameter can be grown, indicating that nanoparticles did not coalesce in the cooler flame. Raman spectroscopy showed that these nanoparticles were primarily magnetite, as opposed to the primarily hematite nanoparticles produced in the hot flame configuration. In order to understand the effect of additive loading on iron oxide nanoparticle morphology, an Ar stream carrying titanium-tetra-isopropoxide (TTIP) was flowed through the outer annulus along with the CH₄ in the inverse diffusion flame configuration. When particles were synthesized in the presence of the TTIP additive, larger monodispersed individual particles (50–90 nm) were synthesized as observed by TEM. In this article, we show that iron oxide nanoparticles of varied morphology, composition, and size can be synthesized and controlled by varying flame configuration, flame temperature, and additive loading.     

A simple route to the synthesis of high-quality NiO nanoparticles

Dispersed nickel oxide nanoparticles were obtained by a simple and low-cost method using a mixture of gelatin as organic precursor and NiCl₂ · 6H₂O as Ni source. The average particle size was estimated from X-ray powder diffraction (XRPD) peaks using the Rietveld refinement. The values ranged from 3.2 to 79 nm. We observed that the particle size changes as a function of synthesis time, with a notable decrease after the addition of NaOH to the solution. Field emission scanning electron microscopy (FE-SEM) measurements show that particles have well defined shapes and are dispersed in an organic matrix. X-ray absorption near edge spectroscopy (XANES) shows also the formation of fcc NiO nanoparticles structures.     

Effect of ambient pressure on the crystalline phase of nano TiO2 particles synthesized by a dc thermal plasma reactor

The synthesis of nanoparticles of titanium dioxide (TiO₂) with varying percentages of anatase and rutile phases is reported. This was achieved by controlling the operating pressure in a transferred-arc, direct current thermal plasma reactor in which titanium vapors are evaporated, and then exposed to ambient oxygen. The average particle size remained around 15 nm in each case. The crystalline structure of the as-synthesized nanoparticles of TiO₂ was studied with X-ray diffraction analysis; whereas the particle morphology was investigated with the help of transmission electron microscopy. The precursor species responsible for the growth of these nanoparticles was studied with the help of optical emission spectroscopy. As inferred from the X-ray diffraction analysis, the relative abundance of anatase TiO₂ was found to be dominant when synthesized at 760 Torr, and the same showed a decreasing trend with decreasing chamber pressure. The study also reveals that anatase TiO₂ is a more effective photocatalytic agent in degrading methylene blue by comparison to its rutile phase.     

Synthesis and characterization of nanocrystalline titanium nitride powder from rutile and anatase as precursors

In this research nanosized titanium nitride powder was synthesized through reaction of titanium oxide with ammonia gas. The reaction was carried out at a very slow heating rate. Two different TiO₂ starting powders contained rutile and anatase phase and differed in initial particle size and surface area. The crystallite size of TiN powders synthesized at 1000 °C was obtained about 40 nm for anatase sample. Surface area and particle size were found to be 19 m²/g, 70 nm for rutile sample and 31 m²/g, 39 nm for anatase sample, respectively. The rutile sample showed an increasing trend in surface area during conversion to the nitride, whilst the anatase sample followed an adverse trend. TiN powder synthesized from anatase had the highest surface area and smallest particle size due to the specification of initial precursor.     

Iron oxide nanoparticles modified with oleic acid: Vibrational and phase determination

A simple path methodology to detect the phase composition of iron oxide nanoparticles modified with oleic acid based on vibrational spectroscopy is present here and applied on three different nanoparticles prepared by co-precipitation method. Firstly, the phase composition, magnetite, maghemite, and hematite, is determined using a reference intensity ratio methodology on X-ray diffraction pattern. Also, the size of each sample was calculated by Scherrer equation. Scanning, transmission electron microscopy, microanalysis and electron diffraction show a core magnetite particles size of around 10 nm for all particles. Based on lattice vibrations, we find a concentration of around 80% of magnetite and a hematite phase lower than 5%. Whereas, the magnetite composition from X-ray diffraction shows 76%. We also investigate the metal-organic interaction and disorder degree of organic molecule conformation by infrared and Raman spectroscopy analysis. Hematite lattice vibrations show more alterations as it interacts with the organic acid. Finally, magnetic measurements at room temperature of the modified particles, suggest a superparamagnetic behavior and high saturation magnetization.     

Ultrasound with low intensity assisted the synthesis of nanocrystalline TiO2 without calcination

A novel method has been developed for the preparation of nano-sized TiO₂ with anatase phase. Nanoparticles with diameter about 6 nm were prepared at a relatively low temperature (75 °C) and short time. The synthesis was carried out by the hydrolysis of titanium tetra-isopropoxide (TTIP) in the presence of water, ethanol, and dispersant under ultrasonic irradiation (500 kHz) at low intensity. The results show that variables such as water/ethanol ratio, irradiation time, and temperature have a great influence on the particle size and crystalline phases of TiO₂ nanoparticles. Characterization of the product was carried out by different techniques such as powder X-ray diffraction (XRD), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM) and UV–vis spectroscopy.     

Synthesis and characterization of composite Au/TiO2 nanoparticles by laser irradiation

Composite Au/TiO₂ nanoparticles were synthesized by laser ablation of gold plate in TiO₂ sol. The nanoparticles were characterized by UV-visible spectroscopy, transmission electron microscopy, X-ray diffraction, and atomic force microscopy. The peak of surface plasmon is at 550 nm with a red shift of 30 nm compared with that of Au nanoparticles in water. Monolayers of composite Au/TiO₂ nanoparticles were obtained by dip-coating technique. The XRD pattern of Au/TiO₂ powders resembles a mixture of anatase TiO₂ and gold.     

Synthesis and analysis of ZnO and CdSe nanoparticles

Zinc oxide and cadmium selenide particles in the nanometer size regime have been synthesized using chemical routes. The particles were capped using thioglycerol in case of ZnO and 2-mercaptoethanol in case of CdSe to achieve the stability and avoid the coalescence. Zinc oxide nanoparticles were doped with europium to study their optical properties. A variety of techniques like UV-Vis absorption spectroscopy, X-ray diffraction (XRD), photoluminescence (PL), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR) and transmission electron microscopy (TEM) were used to carry out structural and spectroscopic characterizations of the nanoparticles.     

Temperature dependence of the lowest frequency <Emphasis Type="BoldItalic">E</Emphasis><Subscript><Emphasis Type="Bold">g</Emphasis></Subscript> Raman mode in laser-synthesized anatase TiO<Subscript>2</Subscript> nanopowder

Nanosized titanium dioxide (TiO₂) powder was prepared by a laser-induced pyrolysis. Specific surface area of the as-grown powder measured by BET method was 109 m²/g. The grain size (14.5 nm) estimated from these data coincides well with the crystallite size (12.3 nm) determined by XRD measurements. The average grain size (∼35 nm) obtained from the subsequent SEM measurements refers to considerable agglomeration of nanoparticles. Raman spectroscopy has been used to investigate the structural properties of TiO₂ nanopowder and its anatase structure is confirmed. The blueshift and broadening of the lowest frequency E_g Raman mode at temperature range ∼25–550 K have been analyzed using a phonon-confinement model. Dominant influence of the strong anharmonic effect at higher temperatures was demonstrated. PACS 81.07.Wx; 78.30.-j; 63.22.+m     

Synthesis of silver nanoparticles and antimony oxide nanocrystals by pulsed laser ablation in liquid media

Pulsed laser ablation in liquid media (PLALM) is a prominent technique for the controlled fabrication of nanomaterials via rapid reactive quenching of ablated species at the interface between the plasma and liquid. Results on nanoparticles and nanocrystals formed by PLALM of silver (Ag) and antimony (Sb) solid targets in different liquid environments (Sodium Dodecyl Sulfate, distilled water) are presented. These experiments were done by irradiating solid targets of Ag and Sb with a nanosecond pulsed Nd:YAG laser output of wavelength 532 nm. Nanoparticles of silver and nanocrystals of antimony oxide (Sb₂O₃) obtained were characterized using UV-Vis spectrometry, Scanning Electron Microscopy (SEM), transmission electron microscopy (TEM), X-ray Energy Dispersion Analysis (EDAX) and X-ray diffractometry (XRD). The morphology of nanomaterials formed is studied as a function of surfactant environment. The silver nanoparticles obtained were spherical of size in the order of 10–35 nm in solution of SDS having different concentrations. In case of the Sb target, ablation was performed in two different molarities of SDS solution and distilled water. Nanocrystals of Sb₂O₃ in powder form having cubic and orthorhombic phases were formed in SDS solution and as fibers of nanocrystals of cubic Sb₂O₃ in distilled water.     

Structural, optical and electrical characterization of antimony-substituted tin oxide nanoparticles

Antimony-doped tin oxide (ATO) nanostructures were prepared using chemical precipitation technique starting from SnCl₂, SbCl₃ as precursor compounds. The antimony composition was varied from 5 to 20 wt%. The lower resistance was observed at composition of Sn:95 and Sb:05, when compared with undoped and higher doping concentration of antimony. The average crystalline size of undoped and doped tin oxide was calculated from the X-ray diffraction (XRD) pattern and found to be in the range of 30-11 nm and it was further confirmed from the transmission electron microscopy (TEM) studies. The scanning electron microscopy (SEM) analysis showed that the nanoparticles agglomerates forming spherical-shaped particles of few hundreds nanometers. The samples were further analyzed by energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and electrical resistance measurements.     

Mobility of inorganic nanoparticles in soft matter

The 100 nm hematite Fe₂O₃ particles in gelatin gel, dense water solution of sugar, commercial paints, foam, cosmetic cream and friable powder exhibit the mobility in the range of mm/s which was determined from the analysis of the resonance absorption line shape. In the solution of sugar the movement is correlated for particle–particle distance less then 300 nm. The Mössbauer spectroscopy of the iron bearing nanoparticles is proposed as a novel experimental technique for the investigation of the dynamical and structural properties of the soft matter at the mesoscoipic scale.