Catalytic oxyfunctionalization of saturated hydrocarbons by non-heme oxo-bridged diiron(III) complexes: role of acetic acid on oxidation reaction

Oxo-bridged diiron(III) complexes [Fe₂O(L¹)₂(H₂O)₂](ClO₄)₄ (1) and [Fe₂O(L²)₂(H₂O)₂](ClO₄)₄ (2), where L¹ and L² are tetradentate N-donor N,N′-bis(2-pyridylmethyl)-1,2-cyclohexanediamine and N,N′-bis(2-pyridylmethyl)ethane-1,2-diamine respectively, have been isolated as synthetic models of non-heme iron oxygenases and characterized by physicochemical and spectroscopic methods. Both the complexes have been studied as catalysts for the oxyfunctionalization of saturated hydrocarbons using green hydrogen peroxide (H₂O₂) as oxidant under mild conditions. The selectivity (A/K) and regioselectivity (3°/2°) in oxidative C–H functionalization of alkanes suggests the involvement of metal-based intermediate in the oxygenation reaction. The catalytic efficiency is found to be strongly dependent on the presence of acetic acid. Remarkable increase in conversion and selectivity favoring the formation of alcohols in the oxidation of cyclohexane and cyclooctane and exclusive hydroxylation of adamantane with drastic enhancement of regioselectivity has been achieved by the addition of acetic acid in the presence of H₂O₂.

     

Iron‐Promoted ortho‐ and/or ipso‐Hydroxylation of Benzoic Acids with H2O2

Regioselective hydroxylation of aromatic acids with hydrogen peroxide proceeds readily in the presence of iron(II) complexes with tetradentate aminopyridine ligands [Fe^II(BPMEN)(CH₃CN)₂](ClO₄)₂ ( 1 ) and [Fe^II(TPA)(CH₃CN)₂](OTf)₂ ( 2 ), where BPMEN=N,N′‐dimethyl‐N,N′‐bis(2‐pyridylmethyl)‐1,2‐ethylenediamine, TPA=tris‐(2‐pyridylmethyl)amine. Two cis‐sites, which are occupied by labile acetonitrile molecules in 1 and 2 , are available for coordination of H₂O₂ and substituted benzoic acids. The hydroxylation of the aromatic ring occurs exclusively in the vicinity of the anchoring carboxylate functional group: ortho‐hydroxylation affords salicylates, whereas ipso‐hydroxylation with concomitant decarboxylation yields phenolates. The outcome of the substituent‐directed hydroxylation depends on the electronic properties and the position of substituents in the molecules of substrates: 3‐substituted benzoic acids are preferentially ortho‐hydroxylated, whereas 2‐ and, to a lesser extent, 4‐substituted substrates tend to undergo ipso‐hydroxylation/decarboxylation. These two pathways are not mutually exclusive and likely proceed via a common intermediate. Electron‐withdrawing substituents on the aromatic ring of the carboxylic acids disfavor hydroxylation, indicating an electrophilic nature for the active oxidant. Complexes 1 and 2 exhibit similar reactivity patterns, but 1 generates a more powerful oxidant than 2 . Spectroscopic and labeling studies exclude acylperoxoiron(III) and Fe^IV?O species as potential reaction intermediates, but strongly indicate the involvement of an Fe^III? OOH intermediate that undergoes intramolecular acid‐promoted heterolytic O? O bond cleavage, producing a transient iron(V) oxidant.     

Aromatic Hydroxylation at a Non‐Heme Iron Center: Observed Intermediates and Insights into the Nature of the Active Species

Mechanism of substrate oxidations with hydrogen peroxide in the presence of a highly reactive, biomimetic, iron aminopyridine complex, [Fe^II(bpmen)(CH₃CN)₂][ClO₄]₂ ( 1 ; bpmen=N,N'‐dimethyl‐N,N'‐bis(2‐pyridylmethyl)ethane‐1,2‐diamine), is elucidated. Complex 1 has been shown to be an excellent catalyst for epoxidation and functional‐group‐directed aromatic hydroxylation using H₂O₂, although its mechanism of action remains largely unknown. 1 , 2 Efficient intermolecular hydroxylation of unfunctionalized benzene and substituted benzenes with H₂O₂ in the presence of 1 is found in the present work. Detailed mechanistic studies of the formation of iron(III)–phenolate products are reported. We have identified, generated in high yield, and experimentally characterized the key Fe^III(OOH) intermediate (λ_max=560 nm, rhombic EPR signal with g=2.21, 2.14, 1.96) formed by 1 and H₂O₂. Stopped‐flow kinetic studies showed that Fe^III(OOH) does not directly hydroxylate the aromatic rings, but undergoes rate‐limiting self‐decomposition producing transient reactive oxidant. The formation of the reactive species is facilitated by acid‐assisted cleavage of the O? O bond in the iron–hydroperoxide intermediate. Acid‐assisted benzene hydroxylation with 1 and a mechanistic probe, 2‐Methyl‐1‐phenyl‐2‐propyl hydroperoxide (MPPH), correlates with O? O bond heterolysis. Independently generated Fe^IV?O species, which may originate from O? O bond homolysis in Fe^III(OOH), proved to be inactive toward aromatic substrates. The reactive oxidant derived from 1 exchanges its oxygen atom with water and electrophilically attacks the aromatic ring (giving rise to an inverse H/D kinetic isotope effect of 0.8). These results have revealed a detailed experimental mechanistic picture of the oxidation reactions catalyzed by 1 , based on direct characterization of the intermediates and products, and kinetic analysis of the individual reaction steps. Our detailed understanding of the mechanism of this reaction revealed both similarities and differences between synthetic and enzymatic aromatic hydroxylation reactions.     

Catalytic activities of polymer‐supported metal complexes in oxidation of phenol and epoxidation of cyclohexene

The metal complexes of N, N′‐bis (o‐hydroxy acetophenone) propylene diamine (HPPn) Schiff base were supported on cross‐linked polystyrene beads. The complexation of iron(III), copper(II), and zinc(II) ions on polymer‐anchored HPPn Schiff base was 83.4, 85.7, and 84.5 wt%, respectively, whereas the complexation of these metal ions on unsupported HPPn Schiff base was 82.3, 84.5, and 83.9 wt%. The iron(III) complexes of HPPn Schiff base were octahedral in geometry, whereas copper(II) and zinc(II) ions complexes were square planar and tetrahedral. Complexation of metal ions increased the thermal stability of HPPn Schiff base. Catalytic activity of metal complexes was tested by studying the oxidation of phenol and epoxidation of cyclohexene in the presence of hydrogen peroxide. The polymer‐supported HPPn Schiff base complexes of iron(III) ions showed 73.0 wt% conversion of phenol and 90.6 wt% conversion of cyclohexene at a molar ratio of 1:1:1 of substrate to catalyst and hydrogen peroxide, but unsupported complexes of iron(III) ions showed 63.8 wt% conversion for phenol and 83.2 wt% conversion for cyclohexene. The product selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was 93.1 and 98.3 wt%, respectively with supported HPPn Schiff base complexes of iron(III) ions but was lower with HPPn Schiff base complexes of copper(II) and zinc(II) ions. Activation energy for the epoxidation of cyclohexene and phenol conversion with unsupported HPPn Schiff base complexes of iron(III) ions was 16.6 kJ mol^?1 and 21.2 kJ mol^?1, respectively, but was lower with supported complexes of iron(III) ions. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis, structure and thermal analysis of the gallium complex of 1,4,7,10-tetraazacyclo-dodecane-N,N′,N″,N-tetraacetic acid (DOTA)

As part of our efforts to synthesize gallium bioconjugates based on folic acid and thiamin we have utilized 1,4,7,10-tetraazacyclo-dodecane-N,N′,N″,N-tetraacetic acid (DOTA) as the chelating ligand for gallium(III). The reaction of gallium chloride with DOTA at room temperature in aqueous solution affords the complex [Ga(HDOTA) · 5.5H₂O] (1), which is characterized by single-crystal X-ray spectroscopy, electrospray mass spectrometry and thermal gravimetric analysis. Gallium displays 6-coordinate distorted octahedral geometry within a puckered macrocyclic DOTA framework. The equatorial plane comprises two nitrogens of the DOTA ring and two oxygens from two of the four pendant carboxylic acid groups. The axial positions are comprised of the remaining two transannular nitrogens of the DOTA ring.     

Mechanistic Insight into Peroxo‐Shunt Formation of Biomimetic Models for Compound II,Their Reactivity toward Organic Substrates,and the Influence of N‐Methylimidazole Axial Ligation

High‐valent iron‐oxo species have been invoked as reactive intermediates in catalytic cycles of heme and nonheme enzymes. The studies presented herein are devoted to the formation of compound II model complexes, with the application of a water soluble (TMPS)Fe^III(OH) porphyrin ([meso‐tetrakis(2,4,6‐trimethyl‐3‐sulfonatophenyl)porphinato]iron(III) hydroxide) and hydrogen peroxide as oxidant, and their reactivity toward selected organic substrates. The kinetics of the reaction of H₂O₂ with (TMPS)Fe^III(OH) was studied as a function of temperature and pressure. The negative values of the activation entropy and activation volume for the formation of (TMPS)Fe^IV?O(OH) point to the overall associative nature of the process. A pH‐dependence study on the formation of (TMPS)Fe^IV?O(OH) revealed a very high reactivity of OOH^? toward (TMPS)Fe^III(OH) in comparison to H₂O₂. The influence of N‐methylimidazole (N‐MeIm) ligation on both the formation of iron(IV)‐oxo species and their oxidising properties in the reactions with 4‐methoxybenzyl alcohol or 4‐methoxybenzaldehyde, was investigated in detail. Combined experimental and theoretical studies revealed that among the studied complexes, (TMPS)Fe^III(H₂O)(N‐MeIm) is highly reactive toward H₂O₂ to form the iron(IV)‐oxo species, (TMPS)Fe^IV?O(N‐MeIm). The latter species can also be formed in the reaction of (TMPS)Fe^III(N‐MeIm)₂ with H₂O₂ or in the direct reaction of (TMPS)Fe^IV?O(OH) with N‐MeIm. Interestingly, the kinetic studies involving substrate oxidation by (TMPS)Fe^IV?O(OH) and (TMPS)Fe^IV?O(N‐MeIm) do not display a pronounced effect of the N‐MeIm axial ligand on the reactivity of the compound II mimic in comparison to the OH^? substituted analogue. Similarly, DFT computations revealed that the presence of an axial ligand (OH^? or N‐MeIm) in the trans position to the oxo group in the iron(IV)‐oxo species does not significantly affect the activation barriers calculated for C?H dehydrogenation of the selected organic substrates.     

Twist‐chair conformation of the tetraoxepane ring remains unchanged in tetraoxaspirododecane diamines

A detailed structural analysis has been performed for N,N′‐bis(4‐chlorophenyl)‐7,8,11,12‐tetraoxaspiro[5.6]dodecane‐9,10‐diamine, C₂₀H₂₂Cl₂N₂O₄, (I), N,N′‐bis(2‐fluorophenyl)‐7,8,11,12‐tetraoxaspiro[5.6]dodecane‐9,10‐diamine, C₂₀H₂₂F₂N₂O₄, (II), and N,N′‐bis(4‐fluorophenyl)‐7,8,11,12‐tetraoxaspiro[5.6]dodecane‐9,10‐diamine, C₂₀H₂₂F₂N₂O₄, (III). The seven‐membered ring with two peroxide groups adopts a twist‐chair conformation in all three compounds. The lengths of the C—N and O—O bonds are slightly shorter than the average statistical values found in the literature for azepanes and 1,2,4,5‐tetraoxepanes. The geometry analysis of compounds (I)–(III), the topological analysis of the electron density at the (3, ?1) bond critical points within Bader's quantum theory of `Atoms in molecules' (QTAIM) and NBO (natural bond orbital) analysis at the B3LYP/6‐31G(d,2p) level of theory showed that there are n_O→σ*(C—O), n_N→σ*(C—O) and n_O→σ*(C—N) stereoelectronic effects. The molecules of compounds (I) and (III) are packed in the crystals as zigzag chains due to strong N—H…O and C—H…O hydrogen‐bond interactions, whereas the molecules of compound (II) form chains in the crystals bound by N—H…O, C—H…π and C—H…O contacts. All these data show that halogen atoms and their positions have a minimal effect on the geometric parameters, stereoelectronic effects and crystal packing of compounds (I)–(III), so that the twist‐chair conformation of the tetraoxepane ring remains unchanged.     

Synthesis,crystal structure,magnetic property,and nuclease activity of a binuclear iron(III) complex

A μ-oxo-di-μ-carboxylato-bridged iron(III) complex containing two tridentate nitrogen ligands, {[Fe₂(bpma)(bpea)(μ-CH₃COO)₂ μ-O)] · (ClO₄)₂ · 0.5CH₃OH} (1) (bpma = N, N-bis(2-pyridylmethyl)methyl-amine, bpea = N,N-bis(2-pyridylmethyl)ethylamine), has been synthesized and determined by X-ray diffraction. Complex 1 crystallizes in the monoclinic space group P2₁/c with a = 10.9434(12) Å, b = 23.118(3) Å, c = 15.8721(18) Å, β = 92.736(2)° and Z = 4. In 1, each Fe(III) has a distorted octahedral geometry with a N₃O₃ donor set. The Fe(III) atoms are bridged by two carboxyl groups and one μ-oxo oxygen with Fe1–Fe2 separation of 3.064 Å. Susceptibility data of 1 indicate strong intramolecular antiferromagnetic coupling of the high-spin Fe(III) atoms with J = ?121.0 cm^?1 and g = 2.04. The interaction with calf thymus DNA was investigated by UV absorption and fluorescent spectroscopy. Results show that the complex binds to ct-DNA with a moderate intercalative mode. The interaction between 1 and pBR322 DNA has also been investigated by submarine gel electrophoresis; the complex exhibits effective DNA cleavage activity in the absence of activating agents under similar physiological conditions.     

Alkaline hydrogen peroxide bleaching of cellulose

A closed system bleaching apparatus was designed to determine the kinetics and effects of various factors on alkaline hydrogen peroxide bleaching of textile cellulose fabrics. It was confirmed that perhydroxyl anion is the primary bleaching moiety in alkaline hydrogen peroxide systems. The use of the apparatus in the measurement of fabric color, waste oxygen, and the subsequent calculation of hydroxyl ion, and molecular hydrogen peroxide confirmed that pH and titration of 'free' hydrogen peroxide in alkaline bleaching systems are not good indicators of bleaching mechanism. The role of the cellulose itself in the chemical bleaching system was determined. The rate of bleaching on cotton fabric was shown to be a first order reaction in concentration of perhydroxyl anion at 60 and 90°C. An activation energy of 17kcal/mole was estimated. Decomposition of H₂O₂ into waste oxygen was found to be second order kinetics.     

Synthesis and reactivity of neodymium(III) amido-tethered N-heterocyclic carbene complexes

The reaction of the heteroleptic Nd(III) iodide, [Nd(L′)(N″)(μ-I)] with the potassium salts of primary aryl amides [KN(H)Ar′] or [KN(H)Ar^*] affords heteroleptic, structurally characterised, low-coordinate neodymium amides [Nd(L′)(N″)(N(H)Ar′)] and [Nd(L′)(N″)(N(H)Ar^*)] cleanly (L′ = t-BuNCH₂CH₂[C{NC(SiMe₃)CHNt-Bu}], N″ = N(SiMe₃)₂, Ar′ = 2,6-Dipp₂C₆H₃, Dipp = 2,6-Prⁱ₂C₆H₃, Ar^* = 2,6-(2,4,6-Prⁱ₃C₆H₂)₂C₆H₃). The potassium terphenyl primary amide [KN(H)Ar^*] is readily prepared and isolated, and structurally characterised. Treatment of these primary amide-containing compounds with alkali metal alkyl salts results in ligand exchange to give alkali metal primary amides and intractable heteroleptic Nd(III) alkyl compounds of the form [Nd(L′)(N″)(R)] (R = CH₂SiMe₃, Me). Attempted deprotonation of the Nd-bound primary amide in [Nd(L′)(N″)(N(H)Ar^*)] with the less nucleophilic phosphazene superbase Bu^tNP{NP(NMe₂)₃}₃ resulted in indiscriminate deprotonations of peripheral ligand CH groups.     

A quantum-mechanical study of the interaction of glyoxal with guanine

A quantum molecular study by the SCFab initio method of the interaction of glyoxal with guanine provides for the formation of a stable covalent adduct in which the glyoxal fragment forms a complementary cyclic ring attached to the imino N₁ and amino N₂ atoms of guanine with the concomitant migration of the N-bonded H atoms to the oxygens of glyoxal. The reaction should proceed in two steps. The most plausible mechanism involves as the first step the interaction of a carbonyl group of glyoxal with the amino group of guanine followed by a similar interaction at the imino group of guanine, rather than the reverse order of interactions. The respective energy barriers are 49.7 and 63.9 kcal/mole. The intermediate product is also more stable when the adduct occurs first at N₂:30.7 kcal/mole versus 17.9 kcal/mole for the adduct at N₁.     

Structure and C-C cross-coupling reactivity of iron(III) complexes of halogenated amine-bis(phenolate) ligands

The preparation of tetradentate amine-bis(phenol) proligands with dichloro and difluoro substituted phenol groups and their reaction with FeX₃ (X = Cl or Br) is described. The compounds, 2-pyridylamino-N,N-bis(2-methylene-4,6-dichlorophenol), H₂[L₁]; 2-pyridylamino-N,N-bis(2-methylene-4,6-difluorophenol), H₂[L₂]; dimethylaminoethylamino-N,N-bis(2-methylene-4,6-dichlorophenol), H₂[L₃]; 2-tetrahydrofurfuryl-N,N-bis(2-methylene-4,6-dichlorophenol), H₂[L₄]; and methoxyethylamino-N,N-bis(2-methylene-4,6-dichlorophenol), H₂[L₅] were prepared in aqueous medium and obtained as white powders in good to excellent yield. Ten new iron(III) halide complexes supported by these tetradentate ligands are reported. Representative single crystal X-ray diffraction structures were obtained for H₂[L₁] and a water adduct of the iron(III) complex, aquachloro{2-pyridylamino-N,N-bis(2-methylene-4,6-dichlorophenolato)}iron(III), 2·H₂O. The structure of the proligand H₂[L₁] shows intramolecular hydrogen bonding. In the solid-state structure, the iron complex exhibits intermolecular hydrogen bonding between the water ligand and the phenolate oxygen of a neighbouring complex. The anhydrous complexes were studied for catalytic activity towards C-C cross-coupling of Grignard reagent nucleophiles with alkyl halide electrophiles.     

The 143 and 300 K polymorphs of hexa­methyl­enetetraminium 2,4-di­nitro­phenolate monohydrate

The title compound, 3,5,7-tri­aza-1-azoniatri­cyclo­[3.3.1.1^3,7]­decane 2,4-di­nitro­phenolate monohydrate, C₆H₁₃N₄⁺·C₆H₃N₂O₅⁻·H₂O, the 1:1 hydrate adduct of hexa­methyl­enetetr­amine (HMT) and 2,4-di­nitro­phenol, undergoes a temperature phase transition. In the room-temperature phase, the adduct crystallizes in the monoclinic P2₁/m space group, whereas in the low-temperature phase, the adduct crystallizes in the triclinic P space group. This phase transition is reversible, with the transition temperature at 273 K, and the phase transition is governed by hydrogen bonds and weak interactions. In both these temperature-dependent polymorphs, the crystal structure is alternately layered with sheets of hexa­methyl­enetetr­amine and sheets of di­nitro­phenol stacked along the c axis. The hexa­methyl­enetetr­amine and di­nitro­phenol moieties are linked by intermolecular hydrogen bonds. The water mol­ecule in the adduct plays an important role, forming O—H⋯O hydrogen bonds which, together with C—H⋯O hydrogen bonds, bridge the adducts into molecular ribbons. Extra hydrogen bonds and weak interactions exist for the low-temperature polymorph and these interconnect the molecular ribbons into a three-dimensional packing structure. Also in these two temperature-dependent polymorphs, di­nitro­phenol acts as a hydrogen-bond acceptor and HMT acts as a hydrogen-bond donor.     

Three isomeric forms of hydroxyphenyl‐2‐oxazoline: 2‐(2‐hydroxyphenyl)‐2‐oxazoline, 2‐(3‐hydroxyphenyl)‐2‐oxazoline and 2‐(4‐hydroxyphenyl)‐2‐oxazoline

Crystal structures are reported for three isomeric compounds, namely 2‐(2‐hydroxy­phenyl)‐2‐oxazoline, (I), 2‐(3‐hydroxy­phenyl)‐2‐oxazoline, (II), and 2‐(4‐hydroxy­phenyl)‐2‐oxazoline, (III), all C₉H₉NO₂ [systematic names: 2‐(4,5‐dihydro‐1,3‐oxazol‐2‐yl)phenol, (I), 3‐(4,5‐dihydro‐1,3‐oxazol‐2‐yl)phenol, (II), and 4‐(4,5‐dihydro‐1,3‐oxazol‐2‐yl)phenol, (III)]. In these compounds, the deviation from coplanarity of the oxazoline and benzene rings is dependent on the position of the hydroxy group on the benzene ring. The coplanar arrangement in (I) is stabilized by a strong intra­molecular O—H⋯N hydrogen bond. Surprisingly, the 2‐oxazoline ring in mol­ecule B of (II) adopts a ³T₄ (^C2T_C3) conformation, while the 2‐oxazoline ring in mol­ecule A, as well as that in (I) and (III), is nearly planar, as expected. Tetra­mers of mol­ecules of (II) are formed and they are bound together via weak C—H⋯N hydrogen bonds. In (III), strong inter­molecular O—H⋯N hydrogen bonds and weak intra­molecular C—H⋯O hydrogen bonds lead to the formation of an infinite chain of mol­ecules perpendicular to the b direction. This paper also reports a theoretical investigation of hydrogen bonds, based on density functional theory (DFT) employing periodic boundary conditions.     

5‐Acetyl‐2‐amino‐6‐methyl‐4‐phenyl‐4H‐pyran‐3‐carbonitrile and 2‐amino‐5‐benzoyl‐6‐methyl‐4‐phenyl‐4H‐pyran‐3‐carbonitrile acetonitrile solvate

The syntheses, X‐ray structural investigations and calculations of the conformational preferences of the carbonyl substituent with respect to the pyran ring have been carried out for the two title compounds, viz. C₁₅H₁₄N₂O₂, (II), and C₂₀H₁₆N₂O₂·C₂H₃N, (III), respectively. In both mol­ecules, the heterocyclic ring adopts a flattened boat conformation. In (II), the carbonyl group and a double bond of the heterocyclic ring are syn, but in (III) they are anti. The carbonyl group forms a short contact with a methyl group H atom in (II). The dihedral angles between the pseudo‐axial phenyl substituent and the flat part of the pyran ring are 92.7 (1) and 93.2 (1)° in (II) and (III), respectively. In the crystal structure of (II), inter­molecular N—H⋯N and N—H⋯O hydrogen bonds link the mol­ecules into a sheet along the (103) plane, while in (III), they link the mol­ecules into ribbons along the a axis.     

Spin Crossover in a Family of Iron(II) Complexes with Hexadentate ligands: Ligand Strain as a Factor Determining the Transition Temperature

This paper reports the synthesis of a family of mononuclear complexes [Fe(L)]X₂ (X=BF₄, PF₆, ClO₄) with hexadentate ligands L=Hpy-DAPP ({bis[N-(2-pyridylmethyl)-3-aminopropyl](2-pyridylmethyl)amine}), Hpy-EPPA ({[N-(2-pyridylmethyl)-3-aminopropyl][N-(2-pyridylmethyl)-2-aminoethyl](2-pyridylmethyl)amine}) and Hpy-DEPA ({bis[N-(2-pyridylmethyl)-2-aminoethyl](2-pyridylmethyl)amine}). The systematic change of the length of amino-aliphatic chains in these ligands results in chelate rings of different size: two six-membered rings for Hpy-DAPP, one five- and one six-membered rings for Hpy-EPPA, and two five-membered rings for Hpy-DEPA. The X-ray analysis of three low-spin complexes [Fe(L)](BF₄)₂ revealed similarities in their molecular and crystal structures. The magnetic measurements have shown that all synthesized complexes display spin-crossover behavior. The spin-transition temperature increases upon the change from six-membered to five-membered chelate rings, clearly demonstrating the role of the ligand strain. This effect does not depend on the nature of the counter ion. We discuss the structural features accountable for the strain effect on the spin-transition temperature.     

Three sterically hindered 6‐amino‐5‐cyano‐2‐methyl‐4‐(1‐naphthyl)‐4H‐pyran‐3‐carboxylate derivatives

In the title compounds, 2‐methoxyethyl 6‐amino‐5‐cyano‐2‐methyl‐4‐(1‐naphthyl)‐4H‐pyran‐3‐carboxylate, C₂₁H₂₀N₂O₄, (II), isopropyl 6‐amino‐5‐cyano‐2‐methyl‐4‐(1‐naphthyl)‐4H‐pyran‐3‐carboxylate, C₂₁H₂₀N₂O₃, (III), and ethyl 6‐amino‐5‐cyano‐2‐methyl‐4‐(1‐naphthyl)‐4H‐pyran‐3‐carboxylate, C₂₀H₁₈N₂O₃, (IV), the heterocyclic pyran ring adopts a flattened boat conformation. In (II) and (III), the carbonyl group and a double bond of the heterocyclic ring are mutually anti, but in (IV) they are mutually syn. The ester O atoms in (II) and (III) and the carbonyl O atom in (IV) participate in intramolecular C—H...O contacts to form six‐membered rings. The dihedral angles between the naphthalene substituent and the closest four atoms of the heterocyclic ring are 73.3 (1), 71.0 (1) and 74.3 (1)° for (II)–(IV), respectively. In all three structures, only one H atom of the NH₂ group takes part in N—H...O [in (II) and (III)] or N—H...N [in (IV)] intermolecular hydrogen bonds, and chains [in (II) and (III)] or dimers [in (IV)] are formed. In (II), weak intermolecular C—H...O and C—H...N hydrogen bonds, and in (III) intermolecular C—H...O hydrogen bonds link the chains into ladders along the a axis.     

Direct Electrochemistry of Hemoglobin Immobilized on Carbon‐Coated Iron Nanoparticles for Amperometric Detection of Hydrogen Peroxide

A novel method for preparation of hydrogen peroxide biosensor was presented based on immobilization of hemoglobin (Hb) on carbon‐coated iron nanoparticles (CIN). CIN was firstly dispersed in a chitosan solution and cast onto a glassy carbon electrode to form a CIN/chitosan composite film modified electrode. Hb was then immobilized onto the composite film with the cross‐linking of glutaraldehyde. The immobilized Hb displayed a pair of stable and quasireversible redox peaks and excellent electrocatalytic reduction of hydrogen peroxide (H₂O₂), which leading to an unmediated biosensor for H₂O₂. The electrocatalytic response exhibited a linear dependence on H₂O₂ concentration in a wide range from 3.1 μM to 4.0 mM with a detection limit of 1.2 μM (S/N=3). The designed biosensor exhibited acceptable stability, long‐term life and good reproducibility.     

A structural systematic study of four isomers of difluoro‐N‐(3‐pyridyl)benzamide

The four isomers 2,4‐, (I), 2,5‐, (II), 3,4‐, (III), and 3,5‐difluoro‐N‐(3‐pyridyl)benzamide, (IV), all with formula C₁₂H₈F₂N₂O, display molecular similarity, with interplanar angles between the C₆/C₅N rings ranging from 2.94 (11)° in (IV) to 4.48 (18)° in (I), although the amide group is twisted from either plane by 18.0 (2)–27.3 (3)°. Compounds (I) and (II) are isostructural but are not isomorphous. Intermolecular N—H...O=C interactions form one‐dimensional C(4) chains along [010]. The only other significant interaction is C—H...F. The pyridyl (py) N atom does not participate in hydrogen bonding; the closest H...N_py contact is 2.71 Å in (I) and 2.69 Å in (II). Packing of pairs of one‐dimensional chains in a herring‐bone fashion occurs viaπ‐stacking interactions. Compounds (III) and (IV) are essentially isomorphous (their a and b unit‐cell lengths differ by 9%, due mainly to 3,4‐F₂ and 3,5‐F₂ substitution patterns in the arene ring) and are quasi‐isostructural. In (III), benzene rotational disorder is present, with the meta F atom occupying both 3‐ and 5‐F positions with site occupancies of 0.809 (4) and 0.191 (4), respectively. The N—H...N_py intermolecular interactions dominate as C(5) chains in tandem with C—H...N_py interactions. C—H...O=C interactions form R₂²(8) rings about inversion centres, and there are π–π stacks about inversion centres, all combining to form a three‐dimensional network. By contrast, (IV) has no strong hydrogen bonds; the N—H...N_py interaction is 0.3 Å longer than in (III). The carbonyl O atom participates only in weak interactions and is surrounded in a square‐pyramidal contact geometry with two intramolecular and three intermolecular C—H...O=C interactions. Compounds (III) and (IV) are interesting examples of two isomers with similar unit‐cell parameters and gross packing but which display quite different intermolecular interactions at the primary level due to subtle packing differences at the atom/group/ring level arising from differences in the peripheral ring‐substitution patterns.     

Bleacing of olive mill wastewater by clay in the presence of hydrogen peroxide

Treatment of olive mill wastewater (OMW) with clayey soils in the presence of hydrogen peroxide (H₂O₂) allows the elimination of phenolic compounds responsible for the black-brownish color of this industrial effluent. The aim of this research was to define optimal physicochemical parameters for the bleaching of OMW with clay in the presence of hydrogen peroxide. Two clayey soil powders were tested (A and B) and the results obtained indicate that high bleaching could be reached after 24 hours exposure of OMW to 7 % (W/V) clay material A in the presence of 0.5 % (V/V) hydrogen peroxide. Under these conditions, the bleaching led to about 87 % decrease of polyphenols (PF) and a 66 % decrease of the Chemical Oxygen Demand (COD). The structure of clay and its concentration in iron salts have an effective adsorbent and catalytic effect on the removal of the majority of polyphenols.