Influence of oxidative injury and monitoring of blood plasma by DSC on patients with psoriasis

Oxidative stress induced by oxygen free radicals (OFRs) is a casual factor in psoriasis. Our aim was to detect the oxidative stress parameters and blood plasma changes with differential scanning calorimetry (DSC) in psoriatic patients. The study included untreated (n = 39) and treated (retinoids, methotrexate, biologic response modifiers; n = 33) white adult patients from both sex. To monitor oxidative stress concentration of malondialdehyde (MDA), reduced glutathione and sulfhydryl groups, production of OFRs, and activity of myeloperoxidase (MPO), superoxide dismutase, and catalase were measured. Denaturation of plasma components was detected in SETARAM Micro DSC-II calorimeter. Total production of OFRs and MPO activity, and the concentration of MDA were significantly increased both in untreated patients with moderate and severe symptoms and in all drug-treated groups compared with controls (p < 0.001). All of the scavengers and antioxidants were significantly decreased in untreated patients and better preserved after retinoid and biological therapy. DSC scans of blood plasma showed melting temperature a characteristic parameter to follow the severity of disease. The calorimetric enthalpy is exhibiting a moderate decrease with the progression of the inflammation. These findings suggest that an imbalance exists between pro-oxidants and antioxidants in untreated severe psoriatic patients. All drug therapy reduced the changes, mainly the biologic response modifiers. Similarly, DSC showed differences between untreated and conventional systemic drug treatment.     

Differential scanning calorimetry (DSC) analysis of human plasma in different psoriasis stages

Psoriasis vulgaris is a chronic autoimmune, inflammatory and proliferative skin disease. Recently, there is a need for new methods to detect and to monitor this dermatological syndrome at any stage. The application of differential scanning calorimetry (DSC) should be as a new diagnostic method for psoriasis detection and monitoring using human plasma. We aimed to detect blood plasma components with DSC in psoriasis patients. The study included 18 white adults (eight men and ten women; median age 55.7 years) who had underwent a full skin examination for psoriasis. According to the psoriasis area severity index (PASI) we selected them into three groups: PASI: 0 (symptomless), PASI: 1–6 (minimal symptoms), PASI: >7 (symptoms). According to medical treatment human blood plasma samples were collected from healthy controls, patients without or with therapy, and were analyzed by DSC technique. In this preliminary study we observed that thermal changes (T _m, calorimetric enthalpy) in blood plasma showed closed correlation with psoriasis severity and medical treatment. Further studies are needed to elucidate these relationships, but our application of the DSC method has provided a potential new tool for the early diagnosis and monitoring of psoriasis patients.     

DSC measurements of blood plasma on patients with chronic pancreatitis and operable and inoperable pancreatic adenocarcinoma

Currently, the most examinations and markers are of limited diagnostic and prognostic value in chronic inflammation of the pancreas and its malignant tumorous disease. The purpose of this pilot study was to measure thermal changes of blood plasma by differential scanning calorimetry (DSC) method on patients with chronic pancreatitis, and with operable or inoperable pancreatic adenocarcinoma. The study involved chronic pancreatitis patients (n = 5), in whom had to perform surgery due to any complications. In malignant pancreatic cancer group, according to resectability of the tumors, patients were divided into operable (curative R0 resection, n = 11) and inoperable (palliative double bypass, n = 5) subgroups. Peripheral blood samples were collected from the patients preoperatively and from healthy controls (n = 5). Denaturation of plasma components was detected in Setaram Micro DSC-II calorimeter. DSC results showed decrease of T _m1 (48.8 °C) and T _m2 (61.8 °C) and increase of T _m3 (68 °C) in chronic pancreatitis group compared to healthy controls (56.2, 63.1 and 68 °C). Similar tendencies were in patients with operable (48.2, 61.5, 67.6 °C) and inoperable (48.1, 62.4, 69 °C) pancreas adenocarcinoma. Calorimetric enthalpy mildly decreased in each group except for operable group (1.3 J g^?1 ?H) compared to controls (1.2 J g^?1 ?H). This research confirmed that DSC parameters of blood plasma on patients with chronic pancreatitis and pancreatic adenocarcinoma are clearly distinct from thermodynamical data of healthy controls. After better validation of calorimetric data, it can be a noninvasive tool for diagnostic and monitoring of pancreatic diseases.     

Thermal degradation of honeys and evaluation of physicochemical properties

We applied DSC for the determination of enthalpies of synthesis reactions of pyridinium- and pyrrolidinium-based ionic liquids (ILs) from pyridine (or N-methyl-pyrrolidine) and n-alkyl bromides (with n = 4, 5, 6, 7, and 8). The combination of reaction enthalpy measurements by DSC with modern high-level first-principles calculations opens valuable indirect thermochemical options to obtain values of enthalpies of the formation and vaporization enthalpies of ILs.     

Estimation of the critical rate of temperature rise for thermal explosion of nitrocellulose using non-isothermal DSC

The expressions to calculate the critical rate of temperature rise of thermal explosion $ ({\text{d}}T / {\text{d}}t)_{{\text{T}_{\text{b}} }} $ for energetic materials (EMs) were derived from the Semenov’s thermal explosion theory and autocatalytic reaction rate equation of nth order, C_nB, B_na, first-order, apparent empiric-order, simple first-order, A_u, apparent empiric-order of m = 0, n = 0, p = 1 and m = 0, n = 1, p = 1, using reasonable hypotheses. A method to determine the kinetic parameters in the autocatalytic-decomposing reaction rate equations and the $ ({\text{d}}T / {\text{d}}t)_{{\text{T}_{\text{b}} }} $ in EMs when autocatalytic decomposition converts into thermal explosion from data of DSC curves at different heating rate was presented. Results show that (1) under non-isothermal DSC conditions, the autocatalytic-decomposing reaction of NC (12.97 % N) can be described by the first-order autocatalytic reaction rate equation dα/dt = 10^16.00exp(?174520/RT)(1 ? α) + 10^16.00exp(?163510/RT)α(1 ? α); (2) the value of $ ({\text{d}}T / {\text{d}}t)_{{\text{T}_{\text{b}} }} $ for NC (12.97 % N) when autocatalytic decomposition converts into thermal explosion is 0.354 K s^?1.     

Thermal studies and decomposition kinetics of alkaline earth metal trichloroacetates

Alkaline earth metal trichloroacetates M(O₂CCCl₃)₂·nH₂O, where M = Be (1), n = 4; M = Mg (2), n = 6; M = Ca (3) or Sr (4) or Ba (5), n = 4, were synthesized and their thermal behavior analyzed using thermogravimetric analysis (TG/DTG/DSC). A critical examination was made for the apparent activation energy by means of non-isothermal kinetic methods employing multiple heating rates. A systematic and comparative study of thermal decomposition was carried out at different heating rates i.e., 5, 10, 15, and 20 °C min^?1 for various trichloroacetates synthesized. It was observed that the Ca, Sr, and Ba trichloroacetates decompose preferentially to respective metal halides while Be and Mg compounds decompose to metal and metal oxide, respectively. The composition of the final residues was also confirmed using FT-IR spectroscopy. The activation energy follows the order: Mg > Ca > Sr > Ba, Be being the exception. Results reveal that each metal trichloroacetate decomposes through its unique thermolysis mechanism.     

GC Analysis of Amino Acids Using Trifluoroacetylacetone and Ethyl Chloroformate as Derivatizing Reagents in Skin Samples of Psoriatic and Arsenicosis Patients

The separation and determination of 19 amino acids were examined using two stages derivatization with trifluoroacetylacetone and ethyl chloroformate from the column HP-5 (30 m × 0.32 mm id) with film thickness 0.25 ??m at an initial column temperature 100 °C for 2 min with ramping of 20 °C min^?1 up to 250 °C with nitrogen flow rate of 3 mL min^?1. The detection was performed by flame ionization detector. Total separation time was 10 min. The separation was repeatable with relative standard deviation (RSD) (n = 5) within 1.5?C1.9 and 1.3?C1.7% in terms of retention time and peak height/peak area, respectively. The method was applied for the determination of amino acids from skin samples of psoriatic patients (n = 6), arsenicosis patients (n = 5) and normal subjects (n = 9) and variation in the contents of the amino acids was noted. The RSDs for the determination were obtained within 3%.     

Synthesis and characterisation of Co(II), Ni(II), Zn(II) and Cd(II) complexes with 5-bromo-N,N′-bis-(salicylidene)-o-tolidine

New complexes of type [M(HL)(CH₃COO)(OH₂)_m]·nH₂O (where M:Co, m = 2, n = 2; M:Ni, m = 2, n = 1.5; M:Zn, m = 0, n = 2.5 and M:Cd, m = 0, n = 0; H₂L:5-bromo-N,N′-bis-(salicylidene)-o-tolidine) have been synthesized and characterized by microanalytical, IR, UV–Vis-NIR and magnetic data. Electronic spectra of Co(II) and Ni(II) complexes are characteristic for an octahedral stereochemistry. The IR spectra indicate a chelate coordination mode for mono-deprotonated Schiff base and a bidentate one for acetate ion. The thermal transformations are complex according to TG and DTA curves including dehydration, acetate decomposition and oxidative degradation of the Schiff base. The final product of decomposition is the most stable metallic oxide.     

Synthesis,crystal structure,and hydrogen-bonded displacive-type structural phase transition of guanidine dichloroacetate

Guanidine dichloroacetate was synthesized and separated as crystals. Differential scanning calorimetry (DSC) measurement shows that this compound undergoes a reversible phase transition at about 275 K with a heat hysteresis of 28 K. Step-like dielectric anomaly observed at 274 K further confirms the phase transition. The single-crystal X-ray diffraction data suggested that these was a transition from a room-temperature phase with the space group of P2₁/n (a = 8.030(5), b = 12.014(9), c = 8.124(6) Å, β = 96.089(1)°, V = 779.3(1) Å³, and Z = 4) to a low-temperature one with the space group of P2₁/c (a = 7.941(2), b = 11.828(3), c = 10.614(2) Å, β = 130.985(1)°, V = 752.6(3) Å³, and Z = 4). The displacements of hydrogen bonds induce the structure phase transition.     

Organocatalytic chemoselective monoacylation of 1,n-linear disulfonamides

Predominant monoacylation of 1,n-linear disulfonamides took place in the presence of pyrrolidinopyridine-type organocatalysts when the chain length of the linear disulfonamides was n = 3, 4, or 5 (monoacylate/diacylate = up to 44). The chemoselectivity of the competitive acylation between N,N′-ditosyl-1,5-pentanediamine (n = 5) and N,N′-ditosyl-1,3-propanediamine (n = 3) was found to be 36, favoring the former substrate. Different chain length by only one carbon atom was discriminated in the competitive acylation between N,N′-ditosyl-1,5-pentanediamine (n = 5) and of N,N′-ditosyl-1,4-butanediamine (n = 4) with the relative acylation rate of 16 in the presence of the organocatalyst.     

Preparation and thermal reliability of <Emphasis Type="Italic">N</Emphasis>-butyl stearate/methyl palmitate composite phase change material

In this study, a series of binary mixtures of N-butyl stearate (nBS) and methyl palmitate (MP) were used to produce a novel composite phase change material (CPCM) for potential application in the eastern China, and their thermal properties were investigated by differential scanning calorimetry (DSC). The results of DSC indicated that the mixture consisting of 10 mass% nBS and 90 mass% MP is optimum as the CPCM in terms of the phase change temperature ranges (T _f = 19.74–5.59 °C; T _m = 18.34–33.80 °C) and latent heats (ΔH _f = 176.8 J g^?1; ΔH _m = 189.3 J g^?1). On the other hand, the thermal reliability and chemical stability of the CPCM after 120, 180, 240, 300, 360 and 500 accelerated thermal cycling tests were studied by DSC and fourier transform infrared (FTIR) analysis. The results demonstrated that the CPCM had good thermal reliability and chemical stability.     

Spectral and thermal characteristics of copper(II) carboxylates with fatty acid chains and their benzothiazole adducts

The carboxylato–Cu(II) complexes of type [Cu₂(RCOO)₄] and their benzothiazole adducts [Cu₂(RCOO)₄bt₂] (bt = benzothiazole, R = CH₃(CH₂) _n?2, n = 12, 14, 16, 18) form the main objectives of this study. The studied carboxylato–Cu(II) complexes are formed from dimeric units to polymeric chains (chromofor CuO₅). The structural changes are due to coordination of ligand (benzothiazole). The polymeric chains of carboxylato–Cu(II) complexes degraded to discrete centrosymetric tetracarboxylate-bridged dimmers (chromofor CuO₄N). These prepared compounds [Cu₂(RCOO)₄] and [Cu₂(RCOO)₄L₂] were submitted to measurements relating to spectral (IR, UV–Vis) and thermal properties (TG, DTA, DSC).     

Synthesis and characterisation of Ni(II), Cu(II), and Zn(II) complexes with an acyclic Mannich base functionalised with thioglycolate moiety

New complexes ML(CNS)·nH₂O [M = Ni, n = 0.5; M = Cu, n = 4.5; M = Zn, n = 0.5, HL: 6-mercapto-(1,4,8,11-tetraazaundecanyl)-6-carboxylic acid)] have been synthesised, chemical analysed, and characterised by different spectroscopic techniques (IR, UV–Vis–NIR, ¹H NMR, EPR, ESI–MS), and magnetic measurements. Based on the IR spectra a dinuclear structure with the 1,3-CSN coordination was proposed for Ni(II) and Cu(II) complexes. The dinuclear structure of Cu(II) complex is also consistent with both magnetic behaviour and EPR spectrum. According to TG, DTG and DTA curves the thermal transformations are complex processes, including dehydration, Mannich base oxidative degradation and thiocyanate decomposition. The final product of decomposition is the most stable metallic oxide, as XRD data indicates. The new complexes were also screened for their microbicidal and antibiofilm properties.     

Phase transition studies in (p-n-phenylbenzylidene)-p-alkoxy anilines

The variation in density with temperature in seven compounds of p-n-(phenyl benzylidene)-p-alkoxy anilines, PBnOA homologous series has been carried out. The compounds with the alkoxy chain number, n = 1, 3–8, exhibit monovariant nematic phase N (n = 1 and 3), bi-variant NB (n = 4–6) and tri-variant NAB (n = 7 and 8) phases. The density and thermal expansion coefficient results reveal that the phase transitions present viz, isotropic to nematic, nematic to SmA, nematic to SmB, nematic to solid crystal and SmA to SmB in these compounds show first-order nature as expected. Further, these results reveal that all the parameters show characteristic change in the vicinity of the phase transformation. The results are discussed in light of the body of the data available.     

Is the structure of hydroxide dihydrate OH−(H2O)2? An ab initio path integral molecular dynamics study

We carried out ab initio path integral molecular dynamics simulations at room temperature for OH^?(H₂O) _n (n = 1, 2) clusters to elucidate the ionic hydrogen bond structure with full thermal and nuclear quantum effects. We found that the hydrogen-bonded proton is located near the water molecule in the case of n = 2, while the proton is located at the center between hydroxide ion and the water molecule in the case of n = 1. Thus, the solvated hydroxide structure \({\text{HO}}{-}{\text{H}} \cdots{\text{OH}}\) is found in n = 2, while the proton sharing hydroxide structure \({\text{HO}} \cdots {\text{H}} \cdots {\text{OH}}\) is in n = 1. We found that the nature of hydrogen bonds significantly changes with the number of water molecules around the hydroxide. We also compared these results with those of F^?(H₂O) _n (n = 1, 2) clusters.     

Ordering of the trees by minimal energies

The ordering of the trees with n vertices according to their minimal energies is investigated by means of a quasi-ordering relation and the theorem of zero points. We deduce the first 9 trees for a general case with n ≥ 46. We obtain the first 12, 11, n + 6, 17, 15, and 12 trees for 7117598 ≥ n ≥ 26, 25 ≥ n ≥ 18, 17 ≥ n ≥ 11, n = 10, n = 9, and n = 8, respectively. For n = 7, we list all the trees in the increasing order of their energies. The maximal diameters of the trees with minimal energies obtained here are 4 for n ≥ 18 and 5 for 17 ≥ n ≥ 8, respectively. For the trees under consideration, the ones with smaller diameters have smaller energies. In addition, we in part prove a conjecture proposed by Zhou and Li (J. Math. Chem. 39:465–473, 2006).     

Density-Functional Theory Study on Neutral and Charged M n C2 (M = Fe, Co, Ni, Cu; n = 1–5) Clusters

The ground-state geometrical and electronic properties of neutral and charged M _n C₂ (M = Fe, Co, Ni, Cu; n = 1–5) clusters are systematically investigated by density-functional calculations. The growth evolution trends of neutral and charged Fe _n C₂, Co _n C₂, Ni _n C₂ and Cu _n C₂ (n = 1–5) clusters are all from lower to higher dimensionality, while it is special for Cu _n C ₂ ^± (n = 1–5) clusters which favor planer growth model. The space directional distributions of Co and Ni indicate stronger magnetic anisotropy than that in Cu atoms. Compare with experimental data (photoelectron spectroscopy), our results are in good agreement. The interaction strengths between metal and carbon atoms in TM–C (TM = Fe, Co, Ni) clusters are comparable and are obviously larger than that in Cu–C clusters, and this interaction strengths also decrease through the sequence: cation > neutral > anion, which may be crucial in exploring the differences in the growth mechanisms of metal–carbon nano-materials.     

Interaction between cucurbit[6]uril and bispyridinecarboxamide

The interaction between cucurbit[6]uril and N,N′-(m-bispyridinecarboxamide)-1,n-alkane (m = 2, 3, 4; n = 4, 6, 8) has been investigated by ¹H-NMR, ESI-MS and single crystal X-ray diffraction method. The results show that cucurbit[6]uril can form pseudorotaxanes with N,N′-(m-bispyridinecarboxamide)-1,6-hexane (m = 2, 3, 4) easily. When the alkyl chain length increases (n = 8), the binding mode is identical, but the binding ability of the host towards guest decreases. In both two cases cucurbit[6]uril shows no selectivity towards positional isomers. However, in the case of n = 4, the binding mode is different, having relations with positional substitution of the guest. Only N,N′-(m-bispyridinecarboxamide)-1,4-butane (m = 2) can form pseudorotaxane with cucurbit[6]uril, while the other two (m = 3, m = 4) form external complex with cucurbit[6]uril. The possible reason for the difference has been discussed.     

Evaluation of thermal stability and parameters of dissolution of nifedipine crystals

Nifedipine is a calcium channel blocker as well as a powerful vasodilator used to treat ischemic heart disease and hypertension. Its photosensitivity and very low solubility in water have been widely acknowledged as important properties deserving improvements. The main thrust of this study is to characterize the nature and the solid-state of nifedipine crystals obtained using different solvents as well as assess the stability by thermal methods (TG and DSC) and crystals structure by means of spectroscopic techniques (MID FTIR and XRD) and assess the dissolution parameters for such crystals. The calculated kinetic parameters activation energy (E _a = 123.3 kJ mol^?1 ± 0.1), the factor frequency (A = 25.93 ± 0.9 min^?1), and the reaction order (n = 0.2) of the main stage of thermal decomposition of nifedipine raw material were performed according to the Ozawa model. The data showed a zero-order kinetic behavior for all crystals despite the different values of E _a and A. The dissolution profiles were obtained for such crystals in three dissolution media with different pH values. After 1 h of dissolution, the higher amount of nifedipine dissolved was observed for crystals obtained in isopropyl alcohol (52.5 %, pH 4.5), followed by those in chloroform (48.1 %, pH 1.2) and subsequently in acetone (32.5 %, pH 6.8). Results showed different thermal stabilities and significant variations in the solubility of the crystals.     

Computational Studies on the Mo-Doped Gold Nanoclusters Au<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>Mo(<Emphasis Type="Italic">n</Emphasis> = 1–10): Structures,Stabilities and Magnetic Properties

The geometric structures, relative stabilities, magnetic properties of Mo-doped gold clusters Au _n Mo(n = 1–10) have been investigated at the PBE1PBE/def2TZVP level of theory. The results show that molybdenum doping has a significant effect on the geometric structures and electronic properties of Au _n Mo(n = 1–10) clusters. For the lowest energy structures of Au _n Mo(n = 1–10), the two dimensional to three dimensional transition occurs at cluster size n ≥ 8, and their relative stabilities exhibit odd–even oscillation with the change of Au atom number. It is found that charge in corresponding Au _n Mo clusters transfers from Mo atom to Au _n host in the size range n = 1–7, whereas the charge in opposition direction in the size range n = 8–10. In addition, the magnetic properties of Au _n Mo clusters are enhanced after doping single Mo atom into the corresponding gold clusters. Our results are valuable for the design of magnetic material.