Synthesis and Characterization of Copolymercore-Silvershell Composite Microspheres

Composite microspheres composed of monodispersed poly（St-co-MAA） latices with diameter about 260 nm as core and Ag nanocrystals as shell were prepared by an in situ reduction method. The shell thickness could be controlled in the range of 15--45 nm by this coating process. The structure and the composition of the core-shell microspheres were characterized by transmission electron microscopy （TEM）, X-ray diffractometry （XRD）, X-ray photoelectron spectroscopy （XPS）, and thermogravimetric analysis （TG）. The formation of the composite microspheres is explained by the nucleation of silver on the surface of the latices followed by growth of the silver shell.     

Electrospun nanofibers of poly（vinyl pyrrolidone）/Eu^3＋ and its photoluminescence properties

Nanofibers of poly（vinyl pyrrolidone） （PVP）/Eu^3＋ with diameters of 300-900 nm were prepared by using sol-gel processing and electrospinning technique. The products were characterized by scanning electron microscope （SEM）, Fourier transform infrared spectroscopy （FT-IR）, and photoluminescence （PL）. The results indicated that, Eu^3＋ was successfully embedded in the onedimensional hybrid nanofibers, and the PVP/Eu^3＋ hybrid nanofibers had favorable photoluminescence properties.     

Synthesis and Characterization of a Novel Ionic Liquid Polymer： Poly（1-（3-aminobenzyl）-3-methylimidazolium chloride）

A new type of polymerizable ionic liquid （IL） 1-（3-aminobenzyl）-3-methylimidazolium chloride （AMIC） was synthesized to obtain a novel polymer salt poly（1-（3-aminobenzyl）-3-methylimidazolium chloride） （PAMIC）. The AMIC was structurally characterized by mass spectrometry and Fourier transform infrared spectrometry （FTIR）. The structure, morphology and properties of PAMIC were investigated by FTIR, ultraviolet visible absorption spectra （UV-Vis）, scanning electron microscopy （SEM）, energy dispersive X-ray spectroscopy （EDX）, conductivity measurement and thermo- gravimetric analysis （TGA）. The PAMIC was spherulitic with an average diameter of about 50 nm and showed high conductivity and excellent thermal stability.     

Ternary Solid Nano Organic/Inorganic Composite of Lanthanum with Acetic Acid and Curcumin/ Hydroxyapatite and Its Antibacterial Activity

Ternary solid complex was synthesized via hybridization of curcumin（Cur）, hydroxyapatite（HAP）, lanthanum（La） and acetic acid（HAc）. The nano-scale hybrid composite of La-Cur/HAP was directly prepared by the wet method. The morphologies and structures of the composite were characterized by scanning electron microscopy （SEM）, infrared（IR） spectroscopy, X-ray diffraction（XRD）, transmission electron microscopy（TEM） and energy dispersive X-ray spectroscopy. The antibacterial activities were tested by methods of minimum inhibitory concentration （MIC） and minimum bactericidal concentration（MBC）. The results show that the size of the La-Cur/HAP composite is less than 100 nm, and the composite exhibits strong bacteriostatic activity against Escherichia coli（E, colt） and Staphylococcus aureus（S, aureus） at low concentrations（in the range of 26-92μg/mL）. The composite can exhibit both of the bacteria and shows higher antibacterial activity against S. aureus than against E. colt. At the same time, La-Cur/HAP shows stronger antibacterial efficiency than ampicillin/HAP.     

Facile fabrication of aggregation-induced emission based red fluorescent organic nanoparticles for cell imaging

A cyano-substituted diarylethlene derivative aggregation-induced emission （ALE） dye with two amino end-groups and 4,4＇-（hexafluoroisopropylidene）diphthalic anhydride were facilely incorporated into red fluorescent organic nanoparticles （FONs） via room temperature anhydride ring-opening polymerization under an air atmosphere. These obtained RO-HFDA FONs were characterized by a series of techniques including gel permeation chromatography, Fourier transform infrared spectroscopy, size distribution and zeta potential measurements, UV-Vis absorption spectrum, fluorescent spectroscopy and transmission electron microscopy. Biocompatibility evaluation and cell uptake behavior of RO-HFDA FONs were further investigated to explore their potential biomedical application. We demonstrated that such FONs showed high water dispersibility, stable uniform spherical morphology （150-200 nm）, broad excitation band （350-605 nm）, intense red fluorescence （627 nm） and excellent biocompatibility, making them promising for cell imaging applications.     

Preparation and characterization of gadolinium hydroxide single-crystalline nanorods by a hydrothermal process

The Gd(OH)3 nanorods with diameters of ca.40-60 nm and lengths of more than 400-550 nm have been prepared by a novelhydrothermal technique.The structural features and chemical composition of the nanorods were investigated by X-ray diffraction(XRD),transmission electron microscopy(TEM),and field emission scanning electron microscope(FESEM),selected areaelectron diffraction(SAED),and high resolution transmission electron microscopy(HRTEM).The possible mechanism for theformation of Gd(OH)3 nanorods was proposed.     

Controlled Synthesis of Dendritic Polyaniline Fibers with Diameters from Nanosize to Submicrometersize

Dendritic polyaniline nanofibers and submicrometer-sized fibers have been synthesized by chemical oxidative polymerization of aniline （An） doped with salicylic acid （SA）. The diameters of the fibers could be controlled easily from 30 to 400 nm by varying the concentration of aniline and salicylic acid at room temperature. Scanning electron microscopy （SEM） and typical transmission electron microscopy （TEM） were applied to investigate their morphologies. . Fourier transform infrared （FTIR） spectrum indicated that the state of the dendritic polyaniline fibers is emerialdine rather than solely the leucoemeraldine or permigraniline forms. The dendritic polyaniline fibers have potential applications as chemical sensors or actuators and neuron devices.     

Modulating the Electronic Structures of Single-walled Carbon Nanotubes by Filling with Electron Acceptors and the Effect on Their Reactivity with Aryl Diazonium Salts

The electronic structures of single-walled carbon nanotubes （SWCNTs） were modulated by filling with tetracyanoquinodimethane （TCNQ）, a strong electron acceptor. The structures of TCNQ-filled SWCNTs were checked by X-ray diffraction analysis, high-resolution transmission electron microscopy and Raman spectroscopy. Optical absorption spectroscopy demonstrated an enhanced reactivity between aryl diazonium and semiconducting SWCNTs.     

Molten-salt Synthesis and Properties of ZnS with Hexagonal Prism Morphology

ZnS with hexagonal prism morphology has been synthesized successfully by molten-salt method with ZnS nanoparticles as precursors, and the ZnS nanoparticles were prepared by one-step solid-state reaction of Zn（CH3COO）2·2H2O with Na2S·9H2O at ambient temperature. Crystal structure and morphology of the product were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and HRTEM. Ultraviolet-visible optical absorption spectrum of the ZnS hexagonal prism shows a distinct red shift from that of bulk ZnS crystals and photoluminescence spectrum exhibits strong emissions at 380 and 500 nm, respectively. Further experiments were designed and the formation mechanism of the ZnS hexagonal prism has been also discussed in brief.     

Syntheses of CuO nanostructures in ionic liquids

A simple and efficient approach is developed to fabricate single-crystalline CuO nanostructures through an ionic liquid assisted one-step low-temperature solid-state route.Both nanoparticles(5 nm in size)and nanorods(5-10 nm in diameter and 50-100 nm in length)of monoclinic CuO were obtained. These synthesized CuO nanostructures were characterized by X-ray diffraction(XRD),transmission electron microscopy(TEM),selected area electron diffraction(SAED),X-ray photoelectron spectros- copy(XPS),energy dispersive spectroscopy(EDS)and nitrogen adsorption analysis.The morpholo- gies of the nanostructures can be controlled by tuning the amount of NaOH and ionic liquids.The growth mechanism of CuO nanostructures is investigated.     

Synthesis and characterization of cuprous selenide nanocrystals at room temperature

A simple method has been developed to prepare cuprous selenide nanocrystals by the reaction of copper nitrate trihydrate with selenium and sodium mercaptoacetate in aqueous ammonia system. Cu_2Se nanocrystals were characterized by transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), electron diffraction (ED), fluorescence spectrum and ultraviolet-visible absorption spectrum. Cu_2Se nanocrystals showed berzelianite structure with 20-40 nm in length and 10-20 nm in width. A possible mechanism is also discussed.     

Synthesis and evolution of PbS nanocrystals through a surfactant-assisted solvothermal route

We present a surfactant-assisted solvothermal approach for the controllable synthesis of a PbS nanocrystal at low temperature (85 degrees C). Nanotubes (400 nm in length with an outer diameter of 30 nm), bundle-like long nanorods (about 5-15 mum long and an average diameter of 100 nm), nanowires (5-20 mum in length and with a diameter of 20-50 nm), short nanorods (100-300 nm in length and an axial ratio of 5-10), nanoparticles (25 nm in width with an aspect ratio of 2), and nanocubes (a short axis length of 10 nm and a long axis length of 15 nm) were successfully prepared and characterized by transmission electron microscopy, scanning electron microscopy, and powder X-ray diffraction pattern. A series of experimental results indicated that several experimental factors, such as AOT concentration, ratio of [water]/[surfactant], reaction time, and ratio of the reagents, play key roles in the final morphologies of PbS. Possible formation mechanisms of PbS nanorods and nanotubes were proposed.     

Ag负载TiO2纳米管微波辅助水热法制备及其光催化性能

以微波辅助水热法制备了二氧化钛纳米管,然后通过浸渍法在其表面负载了银纳米颗粒.所得样品用X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、氮吸附、X射线光电子能谱(XPS)、紫外-可见漫反射等测试方法表征.微波加热处理可以大大缩短反应时间,产物为无定型纳米管,经高温焙烧后转变成锐钛矿型二氧化钛.所得纳米管的外径为7-8 nm,内径为5-6 nm,管长约200 nm,比表面积可达371 m2·g-1.负载的银分散在纳米管的表面,对纳米管的结构与晶型没有影响,但是拓宽了二氧化钛的光吸收范围,使吸收边红移至可见光区,并且有效抑制了光生电子空穴的复合.在可见光降解罗丹明B的实验过程中,与Ag负载的P25及纯二氧化钛纳米管相比,Ag负载二氧化钛纳米管具有更高的可见光催化活性,并且当Ag/Ti 物质的量的比为0.5%时,可见光催化性能最好.     

Fabrication of symmetric hierarchical hollow PbS microcrystals via a facile solvothermal process

Symmetric hierarchical hollow PbS structures consisting of nanowalls were successfully fabricated by a facile solvothermal process in ethylenediamine at 120 degrees C for 12 h, employing lead acetate trihydrate and dithizone as precursors; the thickness of the nanowalls is about 80 nm. No surfactants or other templates were used in the process. The synthesized product was characterized by X-ray powder diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), electron diffraction (ED), ultraviolet-visible spectrometer (UV-vis), near-infrared absorption spectroscopy (near-IR), and fluorescence spectrophotometer. The effect of the reaction conditions on the size and morphologies of PbS structures was investigated. The results show that the temperatures, solvent, and sulfur sources are crucial factors on the morphologies and sizes of the symmetric hierarchical hollow PbS microcrystals. A possible growth mechanism of hierarchical hollow PbS structures is presented. UV-vis absorption spectrum holds a weak peak at 253 nm; the near-infrared absorption spectrum of PbS microcrystals has the two absorption peaks centered at 9613 cm(-1) (1040 nm) and 6771 cm(-1) (1477 nm), showing a blue shift compared with the bulk PbS (approximately 3020 nm). And the fluorescence spectrum of PbS microcrystals consists of an emission peak with a maximum at 305 nm. These PbS microcrystals may have potential applications in the fundamental study of nanostructures as well as fabricating nanodevices.     

Synthesis and characterization of ultrahigh crystalline TiO2 nanotubes

Ultrahigh crystalline TiO2 nanotubes were synthesized by hydrogen peroxide treatment of very low crystalline titania nanotubes (TiNT-as prepared), which were prepared with synthesized TiO2 nanoparticles by hydrothermal methods in an aqueous NaOH solution. Thus, prepared ultrahigh crystalline TiO2 nanotubes (TiNT-H2O2) showed comparable crystallinity with high crystalline TiO2 nanoparticles. The details of nanotubular structures were elucidated by high resolution-transmission electron microscopy (HR-TEM), field emission-scanning electron microscopy (FE-SEM), energy-dispersive X-ray analysis in transmission electron microscopy (TEM-EDX), X-ray diffraction (XRD), photoluminescence (PL), and BET surface area. TiNT-H2O2 was found to be a multiwalled anatase phase only with an average outer diameter of approximately 8 nm and an inner diameter of approximately 5 nm and grown along the [001] direction to 500-700 nm long with an interlayer fringe distance of ca. 0.78 nm. The photocatalytic activity of TiNT-H2O2 was about 2-fold higher than those of TiNT-as prepared, synthesized TiO2 nanoparticles, and TiO2-P25 (Degussa) in the photocatalytic oxidation of trimethylamine gas under UV irradiation.     

Size-controlled synthesis of monodispersed mesoporous α-alumina spheres by a template-free forced hydrolysis method

We demonstrated the formation of monodispersed spherical aluminum hydrous oxide precursors with tunable sizes by controlling the variables of a forced hydrolysis method. The particle sizes of aluminum hydrous oxide precursors were strongly dependent on the molar ratio of the Al(3+) reactants (sulfates and nitrates). In addition, the systematic phase and morphological evolutions from aluminum hydrous oxide to γ-alumina (Al(2)O(3)) and finally to α-Al(2)O(3) through thermal dehydrogenation were characterized by X-ray powder diffraction (XRD), field-emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM). After annealing the amorphous aluminum hydrous oxide in air at 900 °C and 1100 °C for 1 h, we observed complete conversion to phase-pure γ- and α-Al(2)O(3), respectively, while maintaining monodispersity (125 nm, 195 nm, 320 nm, and 430 nm diameters were observed). Furthermore, both γ- and α-Al(2)O(3) were found to be mesoporous in structure, providing enhanced specific surface areas of 102 and 76 m(2) g(-1), respectively, based on the Brunauer-Emmett-Teller (BET) measurement.     

A simple approach to the synthesis of silver nanowires by hydrothermal process in the presence of gemini surfactant

Silver nanowires were synthesized by the hydrothermal route in aqueous solution of gemini surfactant 1,3-bis(cetyldimethylammonium) propane dibromide (16-3-16) at a relatively low temperature. The as-prepared silver nanowires were characterized by X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), transmission electron microscope (TEM), electron diffraction (ED), and UV-vis absorption spectrum. The obtained silver nanowires are of high aspect ratios with an average diameter of approximately 30 nm and length ranging from several to tens of micrometers.     

In2O3八面体的碳还原法制备及其发光性能研究

In₂O₃ octahedrons were synthesized by carbothermal reduction using In₂O₃ nanoparticles as the source material. The as-synthesized products were characterized by X-ray powder diffraction (XRD), energy dispersive X-ray(EDX), scanning electron microscopy(SEM), transmission electron microscopy(TEM), high-resolution transmission electron microscopy (HRTEM), selected-area electron diffraction analysis(SAED) and Room-temperature photoluminescence(PL) spectroscopy. The results show that the products are single-crystalline In₂O₃ octahedrons, the length of the octahedrons is in the range of 400～3 000 nm; the PL patterns display two peaks located at 447nm and 555 nm upon excitation at 380 nm, and the other two peaks located at 444 nm and 550 nm upon excitation at 325 nm; the excitation pattern shows two peaks located at 274 nm and 371 nm, respectively. The growth mechanism of the In₂O₃ octahedrons is discussed, and the high supersaturation ratio is considered as the key factor.