Synthesis and molecular structure of new heterometal alkoxide clusters Ln2Na8(OCH2CF3)14(THF)6 (Ln = Sm, Y, Yb): Highly active catalysts for polymerization of ε-caprolactone and trimethylene carbonate

The new polynuclear heterometal alkoxide clusters Ln₂Na₈(OCH₂CF₃)₁₄(THF)₆ (Ln = Sm 1, Y 2, Yb 3) have been synthesized by the reaction of anhydrous LnCl₃ with 7 equiv. of NaOCH₂CF₃ in 68–75% yields. Crystal structural analysis revealed clusters 1–3 are isomorphous composed of two cubanes and a double open cubane, with one face of an Ln₁Na₂O₄ open cubane capped by an additional Ln₁O₂ layer. Clusters 1–3 show extremely high activity for the polymerization of ε-caprolactone (ε-CL) and trimethylene carbonate (TMC). The reactivity is much higher than those found for the monometallic alkoxides lanthanide complexes previously reported. The dependence of catalytic activity on lanthanide metals is observed: Yb ≈ Y < Sm for ε-CL and Yb < Y < Sm for TMC. The polymers obtained with these clusters all show a unimodal molecular weight distribution with moderate molecular weight distributions (M_w/M_n = 1.4–1.7), indicating that clusters 1–3 can really be used as single-component catalysts. The bimetallic cooperation and the coordination–insertion mechanism were proposed.     

Spin fluctuations and orbital ordering in quasi-one-dimensional α-Cu(dca)2(pyz) {dca = dicyanamide = N(CN)2; pyz = pyrazine}, a molecular analogue of KCuF3

The magnetic properties of α-Cu(dca)₂(pyz) were examined by magnetic susceptibility, magnetization, inelastic neutron scattering (INS), muon-spin relaxation (μSR) measurements and by first-principles density functional theoretical (DFT) calculations and quantum Monte Carlo (QMC) simulations. The χ versus T curve shows a broad maximum at 3.5 K, and the data between 2 and 300 K is well described by an S = 1/2 Heisenberg uniform chain model with g = 2.152(1) and J/k_B = −5.4(1) K. μSR measurements, conducted down to 0.02 K and as a function of longitudinal magnetic field, show no oscillations in the muon asymmetry function A(t). This evidence, together with the lack of spin wave formation as gleaned from INS data, suggests that no long-range magnetic order takes place in α-Cu(dca)₂(pyz) down to the lowest measured temperatures. Electronic structure calculations further show that the spin exchange is significant only along the Cu–pyz–Cu chains, such that α-Cu(dca)₂(pyz) can be described by a Heisenberg antiferromagnetic chain model. Further support for this comes from the M versus B curve, which is strongly concave owing to the reduced spin dimensionality. α-Cu(dca)₂(pyz) is a molecular analogue of KCuF₃ owing to d_x2-y2${\text{d}}_{x^2-y^2}$ orbital ordering where nearest-neighbor magnetic orbital planes of the Cu²⁺ sites are orthogonal in the planes perpendicular to the Cu–pyz–Cu chains.     

Polymeric assembling through reciprocal metal-η-arene π-interactions: Synthesis and X-ray characterization of [Hg(RPhNNNPhR′)2Py]2 (R = NO2, R′ = F), an asymmetric bis diaryl-substituted triazenide-pyridinyl complex of Hg(II)

Hg(SCN)₂ reacts with 3-(2-fluorophenyl)-1-(4-nitrophenyl)triazene in tetrahydrofuran in the presence of triethylamine to give orange crystals of [Hg^II(RPhNNNPhR′)₂Py]₂ (R = NO₂, R′ = F), a new polymeric triazenide-pyridinyl complex of Hg(II) with reciprocal metal-η²-arene π-interactions. The crystal structure belongs to the triclinic space group , and the lattice of [Hg^II(RPhNNNPhR′)₂Py]₂ can be viewed as a supramolecular unidimensional assembling of tectonic [Hg^II(RPhNNNPhR′)₂Py] units linked through intermolecular metal-arene π interactions and non-classical C-H?O hydrogen bonding.     

Germylene and stannylene (Me2NCH2CH2O)2E as strong σ-donor ligands for transition metal complexes [ML(CO)n] (E = Ge, Sn; M = Cr, Mo, W, n = 4 or 5; M = Fe, n = 4). Synthesis, spectroscopic and theoretical study

A series of germylene and stannylene (Me₂NCH₂CH₂O)₂E (E = Ge, 1; E = Sn, 2) complexes of group 6 metals and iron carbonyls L·M(CO)_n (M = Cr, Mo, W, n = 5 (3-8), n = 4 (9, 10); M = Fe, n = 4 (11, 12)) were prepared. These complexes were characterized by ¹H, ¹³C NMR, FTIR and elemental analysis. Ligand properties of 1 and 2 were compared to PPh₃ and dmiy (N,N′-dimethylimidazolin-2-ylidene) using theoretical calculations (PBE/TZ2P) and FTIR. Ligand dissociation energies increase in the order Ph₃P < 2∼1 < dmiy, while donor strength rise in the order PPh₃ < dmiy < 2 < 1.     

Di- and tri-nuclear molybdenum-palladium complexes bearing strong π-acceptor “P-N-P” ligands, MeN{P(OR)2}2 (R = CH2CF3 or Ph)

The dipalladium complexes, [PdCl(μ-MeN{P(OR)₂}₂)]₂ (R = CH₂CF₃, 1a; Ph, 1b) react with [Mo₂(η⁵-C₅H₅)₂(CO)₆] in boiling benzene to afford the molybdenum-palladium heterometallic complexes, [(η⁵-C₅H₅)(CO)Mo(μ-MeN{P(OR)₂}₂)₂PdCl] (R = CH₂CF₃, 3a; Ph, 3b), [(η⁵-C₅H₅)Mo(μ₃-CO)₂(μ-MeN{P(OR)₂}₂)₂Pd₂Cl], (R = CH₂CF₃, 5a; Ph, 5b), [(η⁵-C₅H₅)(Cl)Mo(μ₂-CO)(μ₂-Cl)(μ-MeN{P(OR)₂}₂)PdCl], (R = CH₂CF₃, 6a; Ph, 6b) and also the mononuclear complex [Mo(CO)Cl(η⁵-C₅H₅)(κ²-MeN{P(OR)₂}₂)], (R = Ph, 4b). These complexes have been separated by column chromatography and are characterised by elemental analysis, IR, ¹H, ³¹P{¹H} NMR data. The structures of 1a, 3a, 4b, 5b and 6a have been confirmed by single crystal X-ray diffraction. The CO ligands in 5b and 6a adopt a semi-bridging mode of bonding; the Mo-CO distances (1.95-1.97 Å) are shorter than the Pd-CO distances (2.40-2.48 Å). The Pd-Mo distances fall in the range, 2.63-2.86 Å. The reaction of [Mo₂(η⁵-C₅H₅)₂(CO)₆] with MeN{P(OPh)₂}₂ in toluene gives [Mo₂(CO)₄(η⁵-C₅H₅)₂(κ¹-MeN{P(OPh)₂}₂)₂] (2) in which the diphosphazane acts as a monodentate ligand.     

Syntheses, structures, and dynamic properties of M(CO)2(η-C3H5)(L-L)(NCBH3) (M = Mo, W; L-L = dppe, bipy, en)

Compounds M(CO)₂(η³-C₃H₅)(L-L)(NCBH₃) (L-L = dppe, M = Mo(1), W(2); L-L = bipy, M = Mo(3), W(4); L-L = en, M = Mo(5), W(6)) were prepared and characterized. The single crystal X-ray analyses of 2-6 revealed that the cyanotrihydroborate anion bonds to the metal through a nitrogen atom, the open face of the allyl group being pointed toward the two carbonyls (endo-isomer). In compounds 2, 5, and 6, the two donor atoms of the bidentate ligand occupy equatorial and axial positions, respectively. In the solid state structures of compounds 3 and 4 both nitrogen atoms of the bipy ligand occupy equatorial positions. The NMR spectroscopy reveals a fluxional behavior of compounds 1, 2, 5, and 6 in solution. Although the fluxional behavior of compounds 5 and 6 ceased at about −40 °C, that of compound 1 could not be stopped even at −90 °C. Their low temperature conformations are consistent with their solid state structures. Both the endo- and exo-isomers coexist in solution for compounds 3 and 4.     

Segregated aromatic π-π stacking interactions involving fluorinated and non-fluorinated benzene rings: Cu(py)2(pfb)2 and Cu(py)2(pfb)2(H2O) (py = pyridine and pfb = pentafluorobenzoate)

The syntheses, physical characterization and crystal structures of two new molecular copper(II) complexes of composition [Cu(C₅H₅N)₂(C₇F₅O₂)₂] (1) and [Cu(C₅H₅N)₂(C₇F₅O₂)₂(H₂O)] (2) (C₅H₅N = py = pyridine and C₇F₅O₂⁻ = pfb = pentafluorobenzoate) are reported. Single-crystal X-ray structure determinations revealed that in 1, the Cu²⁺ ion, which lies on a crystallographic inversion centre, is coordinated to two py molecules and two oxygen atoms from two monodentate pfb anions, resulting in a trans-CuN₂O₂ square planar geometry. In 2, the Cu²⁺ ion is also coordinated to two py and two pfb species in addition to a water molecule in the apical site of a distorted CuN₂O₃ square pyramid. In the crystal packing, both 1 and 2 show segregated aromatic π-π stacking interactions in which (py + py) and (pfb + pfb) ring-pairings are seen, but no (py + pfb) pairings occur. Crystal data: 1: C₂₄H₁₀CuF₁₀N₂O₄, M_r = 643.88, space group , a = 8.0777 (3) Å, b = 8.0937 (3) Å, c = 10.5045 (5) Å, α = 90.916 (3)°, β = 93.189 (2)°, γ = 118.245 (3)°, V = 603.36 (4) Å³, Z = 1. 2: C₂₄H₁₂CuF₁₀N₂O₅, M_r = 661.90, space group , a = 7.5913 (5) Å, b = 15.6517 (6) Å, c = 21.1820 (14) Å, α = 95.697 (4)°, β = 94.506 (2)°, γ = 91.492 (4)°, V = 2495.2 (3) Å³, Z = 4.     

Cluster-containing carbon-rich molecules: Reactions of ruthenium cluster carbonyls with {Au(PR3)}2(μ-CCCC) (R = Ph, tol)

Complexes containing C₄ ligands attached to one or two AuRu₃ clusters by conventional σ, 2π interactions have been obtained from reactions between (R₃P)AuC≡CC≡CAu(PR₃) (R = Ph, tol) or Au(C≡CC≡CH){P(tol)₃} and either Ru₃(CO)₁₂, Ru₃(CO)₁₀(NCMe)₂ or Ru₃(μ-dppm)(CO)₁₀. The X-ray determined structures of {(R₃P)AuRu₃(CO)₉}₂(μ₃,η²:μ₃,η²-C₂C₂) [R = Ph (1) (three solvates), tol (2)], AuRu₃{μ₃,η²-C₂C≡CAu(PPh₃)}(CO)₉(PPh₃) (3) and {(Ph₃P)AuRu₃(μ-dppm)(CO)₇} (μ₃,η²:μ₃,η²-C₂C₂){Ru₃(μ-H)(μ-dppm)(CO)₇} (4) are reported.     

[M(dipicH2)(H2O)3], M = Ni,Cu, Zn (dipicH2 = dipicolinic acid) – A combined crystallographic,spectroscopic and computational study

Cationic metal complexes of dipicolinic acid (dipicH₂) are stabilized by [Ce(dipic)₃]²⁻ ions in the three isomorphous crystals [M(dipicH₂)(OH₂)₃][Ce(dipic)₃] · 3H₂O (M = Ni, 1; Cu, 2; Zn, 3). Magnetic dilution provided by the bulky anions leads to well-resolved EPR spectra in polycrystalline samples of 2. The cations have 4+2 coordination, the carbonyl atom of the carboxylic acid groups coordinating weakly from trans positions. In the case of 2 this steric distortion is augmented by Jahn–Teller distortion. All the three structures are satisfactorily modelled by calculations based on density functional theory (DFT). The switch of the Jahn–Teller axis upon deprotonation of the complex, leading to the neutral species Cu(dipic)(H₂O)₃, is also reproduced by DFT. Electronic transition energies as well as the g-tensor component of the d⁹ complex obtained are in good agreement with experiment. However, the calculated hyperfine coupling constants are in error. DFT also fails to satisfactorily account for the electronic transition in the d⁸ ion in 1.     

Synthesis, X-ray crystal structure, and reactivity of Pd2(μ-dotpm)2 (dotpm = bis(di-ortho-tolylphosphino)methane)

Alkylation of PdCl₂(dotpm) (dotpm = bis(di-ortho-tolylphosphino)methane) with n-butyllithium produces the binuclear Pd(0) complex Pd₂(μ-dotpm)₂ and the elimination byproducts 1-butene, cis-2-butene, trans-2-butene, butane, and octane. The dibutyl complex, Pd(dotpm)(n-Bu)₂, is presumed to be the reaction intermediate. The crystal structure of Pd₂(μ-dotpm)₂ reveals that the methylene groups of the bridging dotpm ligands are located on opposite sides of the Pd₂P₄ unit, forming an 8-membered ring that is in an elongated chair conformation. The four phosphorus atoms are not coplanar, and the P1-P2-P3-P4 ring has a torsion angle of 13.8°, which minimizes the spatial interactions among the o-tolyl rings. The Pd-Pd bond distance is 2.8560(6) Å, which indicates that there is a weak “closed-shell” bonding interaction between the d¹⁰-d¹⁰ metal centers. Each palladium atom has a nearly linear geometry, and the eight methyl groups of the dotpm ligands shield the open coordination sites on the metal centers. Four methyl groups shield the metal atoms above and below the Pd₂P₄ ring cavity, and four methyl groups block the open metal sites outside of the Pd₂P₄ ring. The Pd₂(μ-dotpm)₂ complex readily undergoes oxidative addition of dichloromethane to form the rigid A-frame complex Pd₂Cl₂(μ-CH₂)(μ-dotpm)₂.     

Effect of solvent on reactions of Cp2Zr{(μ-H)2BHR}2 and Cp2ZrH{(μ-H)2BHR} (R = CH3, Ph) with B(C6F5)3

The effect that a solvent has on reactions of Cp₂Zr{(μ-H)₂BHR}₂ and Cp₂ZrH{(μ-H)₂BHR} (R = CH₃, Ph) with B(C₆F₅)₃ has been studied. From the reaction in benzene the metathesis product Cp₂Zr{(μ-H)₂B(C₆F₅)₂}₂, 2, was isolated. In the case of diethyl ether, different hydride abstraction products, including [Cp₂Zr(OEt₂){(μ-H)₂BHPh}][HB(C₆F₅)₃], 3, [Cp₂Zr(OEt₂){(μ-H)₂BHCH₃}][HB(C₆F₅)₃], 4, [Cp₂Zr(OEt₂){(μ-H)₂BH₂}][HB(C₆F₅)₃], 5, and [Cp₂Zr(OEt)(OEt₂)][HB(C₆F₅)₃], 6, were isolated depending on the starting zirconocene complex. The diethyl ether molecules of 3-6 are weakly coordinated to Zr and displaced in THF solution. Isolation of 3 and 4 is attributed to their fast precipitation from the reaction mixture, which prevented further reactions from occurring. In addition to the hydride abstraction, a hydride metathesis was also involved in the formation of 5. Time-elapsed ¹¹B NMR studies indicate that 3 and 4 are the intermediates on the pathway to 5 and 6. The molecular structures of 2-6 were determined by single-crystal X-ray diffraction.     

Theoretical insight into stereodynamics of the O(D) + H2 (v = 0–3, j = 0) → OH + H reaction: A quasiclassical trajectory (QCT) study

In this work, the reaction O(¹D) + H₂ → OH + H has been theoretically studied using the quasiclassical trajectory (QCT) method developed by Han and co-workers. All the quasiclassical trajectory calculations are performed on the DK (Dobbyn and Knowles) potential energy surface (PES). The vector correlation information on the reaction O(¹D) + H₂ → OH + H has been obtained. It has been demonstrated that the product alignment is sensitive to the reactant vibrational quantum number (v) at collision energy of 19 kcal/mol. Moreover, with increasing the value of v, backward scattering becomes weaker and forward scattering becomes stronger.     

Syntheses, structures, and dynamic properties of M(CO)2(η-C3H5)(en)(X) (M = Mo, W; X = Br, N3, CN) and [(en)(η-C3H5)(CO)2M(μ-CN)M(CO)2(η-C3H5)(en)]Br (M = Mo, W)

Mononuclear compounds M(CO)₂(η³-C₃H₅)(en)(X) (X = Br, M = Mo(1), W(2); X = N₃, M = Mo(3), W(4); X = CN, M = Mo(5), W(6)) and cyanide-bridged bimetallic compounds [(en)(η³-C₃H₅)(CO)₂M(μ-CN)M(CO)₂(η³-C₃H₅)(en)]Br (M = Mo (7), W(8)) were prepared and characterized. These compounds are fluxional and display broad unresolved proton NMR signals at room temperature. Compounds 1-6 were characterized by NMR spectroscopy at −60 °C, which revealed isomers in solution. The major isomers of 1-4 adopt an asymmetric endo-conformation, while those of 5 and 6 were both found to possess a symmetric endo-conformation. The single crystal X-ray structures of 1-6 are consistent with the structures of the major isomer in solution at low temperature. In contrast to mononuclear terminal cyanide compounds 5 and 6, cyanide-bridged compounds 7 and 8 were found to adopt the asymmetric endo-conformation in the solid state.     

Collision energy effect on the H′ + BrH (ν = 0, j = 0) → H′Br + H reaction: A quasi-classical trajectory study

Theoretical studies on the dynamics of the exchange reaction H′ + BrH (ν = 0, j = 0) → H′Br + H are performed on potential energy surface (PES) (Kurosaki et al., private communication) for the ground state using the quasi-classical trajectory method. The cross sections, computed at the collision energies (E_c) of 0.5-2.0 eV, are in good agreement with the earlier quantum wave packet results. The rotational, vibrational, and translational fractions in the total energy and the vibrational distribution for the product molecule are calculated at the same collision-energy range. The results support the repulsive character of the PES. In the considered E_c range, it has little chance to occur in an indirect reaction. The alignment and orientation of the product H′Br are investigated in detail with stereodynamics. The results show that E_c can effect on both the alignment and the orientation of product.     

Synthesis and characterization of mono and polymeric cyclopalladated compounds: Crystal and molecular structure of [{Pd(dmba)(ONO2)}2(μ-pz)] · H2O (pz = pyrazine)

In the treatment of cyclometallated dimer [Pd(dmba)(μ-Cl)]₂ (dmba = N,N-dimethylbenzylamine) with AgNO₃ and acetonitrile the result was the monomeric cationic precursor [Pd(dmba)(NCMe)₂](NO₃) (NCMe = acetonitrile) (1). Compound 1 reacted with m-nitroaniline (m-NAN) and pirazine (pz), originating [Pd(dmba)(ONO₂)(m-NAN)] (2) and [{Pd(dmba)(ONO₂)}₂(μ-pz)] · H₂O (3), respectively. These compounds were characterized by elemental analysis, IR and NMR spectroscopy. The IR spectra of (2–3) display typical bands of monodentade O-bonded nitrate groups, whereas the NMR data of 3 are consistent with the presence of bridging pyrazine ligands. The structure of compound 3 was determined by X-ray diffraction analysis. This packing consists of a supramolecular chain formed by hydrogen bonding between the water molecule and nitrato ligands of two consecutive [Pd₂(dmba)₂(ONO₂)₂(μ-pz)] units.     

A general route for the synthesis of hydrido-carboxylate complexes of the type MH(CO)(κ-OCOR)(PPh3)2 [M = Ru,Os; R = CH3, CH2Cl,C6H5, CH(CH3)2] and their use as precatalysts for hydrogenation and hydroformylation reactions

The synthesis and solid-state IR, ¹H and ³¹P{¹H} NMR spectroscopic characterization of complexes of the type MH(CO)(κ³-OCOR)(PPh₃)₂ [M = Ru, Os; R = CH₃, CH₂Cl, C₆H₅ and CH(CH₃)₂] are reported in this paper. These compounds were obtained by reaction of the respective cationic complex [MH(CO)(NCMe)₂(PPh₃)₂]BF₄ with the sodium salt of the corresponding carboxylic acid in a 1:1 v/v dichloromethane/methanol solution at room temperature. The spectroscopic data of these complexes and some DFT calculations reveal an octahedral geometry with a bidentated carboxylate, two equivalent triphenylphosphines in a mutually trans positions, a linear hydride and a linear carbonyl both in the cis-positions of the coordination sphere. The catalytic results indicate that these complexes are efficient and regioselective precatalysts for the quinoline hydrogenation and for the hydroformylation of 1-hexene, under mild reaction conditions (130 °C and 4 atm H₂ and 120 °C and 15 atm H₂/CO, respectively). For benzothiophene hydrogenation, the osmium complexes showed low activities whereas the analogous ruthenium complexes were catalytically inactive under somewhat more drastic reaction conditions to those of the quinoline hydrogenation (140 °C and 10 atm H₂).     

Trimetallic complexes containing 1,1′-Rc′(CC)2 units [Rc′ = ruthenocene-1,1′-diyl, Ru(η-C5H4-)2]

Reactions between 1,1′-(Me₃SiCC)₂Rc′ [Rc′ = ruthenocen-1,1′-diyl, Ru(η-C₅H₄-)₂] and RuCl(PP)Cp′ in the presence of KF gave 1,1′-{Cp(PP)RuCC}₂Rc′ [Cp′ = Cp, PP = PPh₃1, P(m-tol)₃2, dppe 3, dppf 4; Cp′ = Cp^∗, PP = dppe 5]. Compounds 1 and 2 react with tcne to give two diastereomers a/b of the allylic (vinylcarbene) complexes 6 and 7, while methylation of 5 gave the bis-vinylidene [1,1′-{Cp^∗(dppe)RuCCMe}₂Rc′](BPh₄)₂ (8). The X-ray structures of 4, 6b and 8 have been determined. Cyclic voltammograms indicate that there is some electronic communication between the ruthenium end-groups through the Rc′ centre.     

Palladium nitrosyl carboxylate clusters: Synthesis and reactivity. X-ray structures of Pd4(μ-CO)2(μ-NO)(μ-RCO2)5 (R = Pr, Bu)

New palladium nitrosyl carboxylate complexes Pd₈(CO)_4−m(NO)_m(NO₂)₄(RCO₂)₈ (m = 2, 4) were obtained by the treatment of palladium carbonyl carboxylates clusters cyclo-Pd_n(μ-CO)_n(μ-RCO₂)_n (n = 6) (1) with gaseous nitrogen monoxide. These complexes are the products of CO substitution in early described Pd₈(CO)₄(NO₂)₄(RCO₂)₈ clusters. By adding an excess of corresponding acid to reaction mixture Pd₄(CO)₂(NO)(RCO₂)₅ complexes were obtained, their structures were determined by X-ray diffraction analysis. These clusters are intermediate products of transformation of 6-nuclear initial clusters into various 8-nuclear complexes. This fact demonstrates that carboxylate ligands can be used as stabilizers for intermediate unstable polynuclear palladium compounds.     

A unique example of a co-crystal of [Ag(atr)2][Cr(dipic)2] (dipic = dipicolinate; atr = 3-amino-1H-1,2,4-triazole) and dinuclear [Cr(H2O)(dipic)(μ-OH)]2, with different coordination environment of Cr(III) ions

Treatment of a neutral aqueous solution of dipicolinic acid (dipicH₂), 3-amino-1H-1,2,4-triazole (atr) and CrCl₃·6H₂O in the presence of AgNO₃ (in molar ratio 1:1:1:3) under hydrothermal condition led to the formation of a co-crystal of {[Ag(atr)₂][Cr(dipic)₂]}₂·[Cr(H₂O)(dipic)(μ-OH)]₂·4H₂O (1). Compound 1 was characterized by elemental analyses, IR and UV-Vis spectroscopy as well as X-ray diffraction studies. The structure consists of two [Ag(atr)₂]⁺ cations, two [Cr(dipic)₂]⁻ anions, one co-crystallized neutral dinuclear chromium(III) complex, [Cr(H₂O)(dipic)(μ-OH)]₂, and four co-crystallized water molecules. Silver(I) ion in [Ag(atr)₂]⁺ is coordinated by two monodentate 3-amino-1H-1,2,4-triazole ligands, bound via endocyclic nitrogen atoms, in a linear fashion. Chromium(III) ion is octahedrally coordinated by two O,N,O-tridentate dipicolinate ligands in anionic complex. Each chromium(III) ion in neutral dinuclear complex, [Cr(H₂O)(dipic)(μ-OH)]₂, is octahedrally coordinated by one O,N,O-tridentate dipicolinate ligand, one water molecule and two bridging μ-OH ions in cis position. Thermal methods (TGA/DTA) confirm the number of co-crystallized water molecules in 1.     

Syntheses and crystal structures of [Bu3SbCr(CO)5], [Bu3BiM(CO)5] (M = Cr, W), and [Bu3BiMnCp′(CO)2] (Cp′ = η-C5H4CH3)

Syntheses and crystal structures of [^tBu₃SbCr(CO)₅] (1), [^tBu₃BiM(CO)₅] [M = Cr (2), W (3)] and [^tBu₃BiMnCp′(CO)₂] (4) (Cp′ = η⁵-C₅H₄CH₃) are reported.