Syntheses and structural characterization of some mono- and di-p-nitrophenyl[3]ferrocenophanes: X-ray structure of [3]ferrocenophane, 3-p-nitrophenyl[3]ferrocenophane, and 3,4′-bis-(p-nitrophenyl)[3]ferrocenophane; DFT calculations on ferrocene derivatives

[3]Ferrocenophane (3a) reacts in a Gomberg reaction with diazotized p-nitroaniline to give a mixture of mono- and di-substituted products. The isomeric pairs of 3- and 2-(p-nitrophenyl)[3]ferrocenophanes (4 and 5), as well as 3,4′- and 3,4-bis-(p-nitrophenyl)[3]ferrocenophanes (6 and 7) were separated from the mixture by column chromatography on Al₂O₃ and characterized by means of mass, IR, UV, ¹H-NMR spectroscopy, and by X-ray analysis (4 and 6). PM3/tm and density functional theoretical calculations on ferrocene (1) and ferrocenophane derivatives are reported. A refined X-ray structure determination of [3]ferrocenophane (3a) is given.     

Pyridine mediated supramolecular assemblies of 3,5-dinitro substituted benzoic acid, benzamide and benzonitrile

Synthesis and characterization of molecular assemblies of pyridine adducts, 1a, 2a and 3a, of 3,5-dinitrobenzoic acid, 1, 3,5-dinitrobenzamide, 2 and 3,5-dinitrobenzonitrile, 3, respectively, have been reported. All these adducts were obtained by crystallization of 1, 2 and 3 from pyridine. However, crystallization of 1 from pyridine in the presence of benzene resulted in the formation of a pyridinium adduct, 1b, along with a water molecule. All the adducts crystallize in a 1:1 molecular ratio except 1a, which forms a 1:2 adduct, as characterized by single crystal X-ray diffraction method. The adducts crystallize in different space groups—1a, orthorhombic, Pna2₁; 1b, monoclinic, P2₁; 2a, monoclinc, C2/c; 3a, triclinic, . In two-dimensional arrangement, 1a, 1b and 3a form sheet structures. In 1a, within the two-dimensional sheets, large cavities are formed, which are occupied by pyridine molecules. In 1b, the sheets are catenated to form a chicken-wire network. However, 2a formed a crossed ribbon packing pattern with empty channels in the three-dimensional structure.     

1,1-(1-Propene-1,3-diyl)-ferrocene: modified synthesis, crystal structure, and polymerisation behaviour

The dehydro[3](1,1^′)ferrocenophanes, 1,1^′-(1-propene-1,3-diyl)-ferrocene (3a), and 1,1^′-(3-phenyl-1-propene-1,3-diyl)-ferrocene (3b) were synthesised under Shapiro conditions from the tosylhydrazones of the corresponding α-oxo-[3](1,1^′)ferrocenophanes. Electrochemistry shows 3a is oxidised at smilar potential to ferrocene; according 3a can be chemically oxidised using silver trifluoromethanesulfonate. The structure of 3a shows a ring tilt of 11.3°. Attempts to polymerise 3a using the ROMP initiator Mo(CHCMe₂Ph)[N(2,6-ⁱPr₂C₆H₃)][OCMe(CF₃)₂]₂ led to a mixture of insoluble material and a soluble mixture of apparently cyclic oligomers ([3a]_n).     

Homologues of N-heterocyclic carbenes: Detection and electronic structure of N-bridgehead pyrido[a]-anellated 1,3,2-diazagermol-2-ylidenes

Novel N-bridgehead pyrido[a]-anellated 1,3,2-diazagermol-2-ylidenes 1a,b were obtained from GeCl₂ · dioxane and dilithium reagents formed from N-tert-butyl pyridine-2-aldimines and excess lithium in THF whereas attempts to generate the analogous silylene by reduction of the dichloro-pyrido[a]-1,3,2-diazasilole 4a, synthesized from SiCl₄ and the new dilithium reagent, failed. Characteristic chemical shifts of the pyrido ¹H and ¹³C nuclei between those of pyridine compounds and the not fully cyclodelocalized electron-rich 4a with dihydropyridine substructure hint to a cyclodelocalized 10π electron system in 1a,b. Quantum chemical investigations of a series of pyrido[a]- and benzo-anellated imidazol-2-ylidenes and their silylene and germylene homologues show for all compounds cyclodelocalized 10π-systems but for pyrido[a]-anellation an increase of the energy of the π-MO’s relative to those of element(II) lone electron pairs which leads to destabilization compared to the benzo-anellated isomers.     

Oxovanadium(IV) complexes as molecular catalysts in epoxidation: Simple access to pyridylalkoxide derivatives

Reaction of bis(aryl)-2-pyridylmethanol ligands (1a-7a) with VO(SO₄) · 5H₂O results in the formation of metal-oxo complexes [VO(N-O)₂] (1-7), with N-O = bis(aryl)-2-pyridylmethanol. A molecular structure of (4) has been determined by single crystals X-ray diffraction study, which showed the expected square planar pyramidal geometry with the pyridine ring nitrogens in trans-position to each other. The metal-oxo complexes (1-4,6,7) demonstrated the ability to catalyse epoxidation reactions of alkenes with molecular oxygen.     

Reactivity and electrochemical behavior of ruthenium dithiolene complexes with coordinatively unsaturated metal centers: cycloaddition and dimerization reactions

The novel ruthenium dithiolene complexes [(arene)Ru{S₂C₂(COOMe)₂}] (arene = C₆H₆ (1a), C₆H₄(Me)(iPr) (1b), C₆Me₆ (1c)) were synthesized. The equilibrium between complex 1a and the corresponding dimer [(C₆H₆)Ru{S₂C₂(COOMe)₂}]₂ (1a′) was confirmed in solution. The reaction of complex 1a with dimethyl- or diethylacetylene dicaboxylate gave the alkene-bridged adducts [(C₆H₆)Ru{S₂C₂(COOMe)₂}{C₂(COOR)₂}] (R = Me (2a), Et (3a)) as [2 + 2] cycloaddition products formally. The reactions of complex 1a with diazo compounds also gave the alkylidene-bridged adducts [(C₆H₆)Ru{S₂C₂(COOMe)₂}(CHR)] (R = H (4a), SiMe₃ (5a), COOEt (6a)) as [2 + 1] cycloaddition products. The electrochemical behavior of complex 1a was investigated. The reductant of complex 1a was a stable species for several minutes. The oxidant of complex 1a was very unstable; the cation 1a⁺ formed was immediately converted to the corresponding cationic dimer 1a′⁺. The cationic dimer 1a′⁺ was stable for several minutes, and it was rapidly and quantitatively converted to the neutral complex 1a when it was reduced.     

Synthesis and characterization of novel optically active poly(amide-imide)s via direct amidation

N,N′-Pyromelliticdiimido-di-l-methionine (3) was prepared from the reaction of pyromellitic dianhydride (1) with l-methionine (2) in glacial acetic acid and pyridine solution at refluxing temperature. The direct polycondensation reaction of the monomer diimide-diacid (3) with 1,3-phenylenediamine (4a), 1,4-phenylenediamine (4b), 2,6-diaminopyridine (4c), 3,5-diaminopyridine (4d), 4,4′-diaminodiphenylether (4e) and 4,4′-diaminodiphenylsulfone (4f) was carried out in a medium consisting of triphenyl phosphate, N-methyl-2-pyrolidone, pyridine and calcium chloride. The resulting poly(amide-imide)s having inherent viscosities 0.45-0.53 dl g⁻¹ were obtained in high yields and are optically active and thermally stable. All of the above compounds were fully characterized by IR spectroscopy, elemental analyses and specific rotation. Some structural characterization and physical properties of these new optically active poly(amide-imide)s are reported.     

Synthesis of the substituted spiro segment of halichlorine--use of radical cyclization and stereospecific cuprate addition to an α,β-unsaturated lactam

Radical cyclization (26a,b → 27a,b+28) and cuprate addition (28 → 31) were used as key steps to construct the spiro core 4 of halichlorine.     

Synthesis, characterization and bromination of bis(phosphinoferrocenyl) gold(I) compounds

Reaction of [(dppf)Au₂Br₂] (3) {dppf = 1,1′-bis(diphenylphosphino)ferrocene} and [(dippf)Au₂Br₂] (4) {dippf = 1,1′-bis(diisopropylphosphino)ferrocene} with excess bromine yields two new complexes [(C₅H₄Br₃)(PR₂)AuBr] (R = Ph, 5; R = i-Pr, 6). Bromination of the free diphosphinoferrocene ligands produces the expected brominated cyclopentenes (C₅H₄Br₃)(PR₂) (R = Ph, 7; R = i-Pr, 8) in good yields; however, these compounds could not be complexed to gold due to reduced basicity of 7 and 8. When the bromination is performed under wet aerobic conditions the oxidized pseudo-centrosymmetric product, [doppf][FeBr₄] (9) {doppf = 1,1′-bis(oxodiphenylphosphino)ferrocene, is formed as the major product. Solid-state structures of 1, 2, 4, 6, and 9 have been established by means of single-crystal X-ray crystallography.     

A convenient synthesis of linear pyridinoimidazo[1,2-a]pyridine and pyrroloimidazo[1,2-a]pyridine cores

Two new imidazo[1,2-a]pyridine derivatives, pyridinoimidazo[1,2-a]pyridine (10) and pyrroloimidazo[1,2-a]pyridine (16), were synthesised from 2-amino-4-methyl-5-nitropyridine (1) by linear cyclisation, making use of dimethylformamide dimethylacetal (DMFDMA) as an agent of vinylamine functionalisation. This report describes first the formation of pyridine and pyrroloimidazopyridine from (1), and then the formation of pyridine-fused and pyrrolo-fused pyridine by the Friedländer method and reductive cyclisation followed by treatment of the resulting adduct with chloroacetaldehyde.     

Synthesis of 3-substituted-4-hydroxyquinoline N-oxides from the Baylis-Hillman adducts of o-nitrobenzaldehydes

The reaction of the Baylis-Hillman adducts 1b-f derived from o-nitrobenzaldehydes in trifluoroacetic acid in the presence of triflic acid (0.2 equiv.) afforded 3-substituted-4-hydroxyquinoline N-oxides 2b-e and 2a in good to moderate yields. The reaction mechanism was evidenced by the experiment with 1f, the Baylis-Hillman adduct of 2-nitrobenzaldehyde N-tosylimine, as the one involving N-hydroxyisoxazoline as the key intermediate.     

Synthesis and electrochemical studies of ferrocene-dithiafulvalenes (Fc-DTF) and 1,1′-bis(dithiafulvalenyl)ferrocene (DTF-Fc-DTF). An approach towards new conducting organic materials

Novel π-conjugated donor compounds based on the strong electron-donating ferrocene moiety and dithiafulvalene donors exhibited increased electron donor ability. The ferrocenylketones 4a,b, 5, 8 and 9 were synthesized via described methods, and allowed to react with 2-dimethoxyphosphinyl-1,3-benzodithiole (13) in the presence of n-BuLi at −78°C in dry THF to afford the corresponding ferrocene-dithiafulvalenes 14a,b, 18, 19 and 1,1′-bis(benzo-1,3-dithiol-2-ylidene)ethyl]ferrocene (15). Electrochemical properties of these new donor compounds were studied using cyclic voltammetry (CV) and UV-Vis spectra. CV and absorption spectra of the new compounds were studied in comparison with ferrocene (6) and dibenzo-tetrathiafulvalene DB-TTF 3. Two-electron and three-electron redox behaviors were observed as two waves. The absorption spectra showed a red-shift with a slight increase in the absorption intensities.     

Ring-opening reactions of cyclic ethers with diiodo- and dibromodimethylsilane equivalents

Ring-opening halosilation of cyclic ethers with reagents of (Me₂N)₂SiMe₂/4MeI (1a) and (Me₂N)₂SiMe₂/4allylBr (1b) was studied. Tetrahydrofuran and cyclohexene oxide reacted with 1a and 1b to give ring-opened di(haloalkoxy)dimethylsilanes in good yield. With less strained tetrahydropyran, however, only reagent 1a gave the ring-opened product. Reactions of reagents 1a and 1b with propylene oxide also proceeded smoothly, although the regioselectivity was rather low. When similar reactions were carried out with (Me₂N)₂SiMe₂/2MeI (2a) and (Me₂N)₂SiMe₂/2allylBr (2b) in a ratio of cyclic ethers/2a or 2b = 1/1, the corresponding 1:1 adducts were obtained.     

Fulvalenediyl-bridged heterobimetallic complexes consisting of sandwich and half-sandwich compounds with early-late transition metals

A straightforward synthesis methodology for the preparation of heterobimetallic [(η⁵-C₅H₅)(η⁵-C₅H₄-C₅Me₄)M] (3a, M = Fe; 3b, M = Ru) and [(η⁵-C₅H₅)((μ-η⁵:η⁵-C₅H₄-C₅Me₄)TiCl₃)M] (4a, M = Fe; 4b, M = Ru) in which early and late transition metals are connected by a fulvalenediyl bridge is reported.The structures of molecules 3b and 4a in the solid state are discussed. Most noteworthy in 4a is the exo arrangement of the iron and titanium atoms coordinated by the fulvalenediyl unit which itself is twisted with a dihedral angle between the joined cyclopentadienyl rings of 19.33(9)°. Electrochemical, UV/Vis/NIR spectroscopic and spectroelectrochemical experiments on 4a and Cp∗TiCl₃, for comparison, provide evidence for some transfer of electronic information between the conjoined ferrocene and half-sandwich titanocene trichloride subunits of 4a. Evidence comes from systematic potential shifts and the presence of a fairly intense Fe → Ti charge-transfer absorption band that vanishes upon oxidation and reduction of 4a.     

A substrate controlled, very highly diastereoselective Morita-Baylis-Hillman reaction: a remote activation of the diastereofacial selectivity in the synthesis of C-3-branched deoxysugars

The Morita-Baylis-Hillman (MBH) reaction of p-nitrobenzaldehyde with C (6) acyl protected enuloside 1 in the presence of TiCl₄/TBAI yielded highly diastereoenriched C-3-branched deoxysugar derivative or MBH adduct 1′a in high yield, while reactions of unprotected enuloside 2a and C (6) alkyl protected enulosides 2d-e with p-nitrobenzaldehyde under the same conditions afforded the adducts 2′a and 2′d-e, respectively, in low yield with moderate selectivity. Several representative aromatic and aliphatic aldehydes were selected to undergo MBH reaction with 1 to give their respective adducts in very good yield with a very high diastereoselectivity. A plausible mechanism based on the assumption of a Zimmerman-Traxler-type transition state was proposed to explain the excellent selectivity observed with adducts derived from 1. The synthetic application of these adducts were shown by their stereoselective reduction to corresponding threo isomers in very good yield.     

Ferrocenoyl peptides with sulfur-containing side chains: synthesis, solid state and solution structures

The synthesis and full characterization of a number of amino acid and dipeptide derivatives with sulfur-containing side chains derived from ferrocene carboxylic acid and ferrocene-1,1′-dicarboxylic acid is presented. In particular, compounds Fc-CO-(Aaa)_n-OMe (4) and Fe[C₅H₄-CO-(Aaa)_n-OMe]₂ (3) with (Aaa)_n = Cys(Bzl) (a), Cys(Bzl)-Cys(Bzl) (b), Cys(p-OMe-Bzl) (c), Cys(p-OMe-Bzl)-Cys(p-OMe-Bzl) (d), Met (e), and Met-Met (f) were prepared. Also, the free acid derivatives Fe[C₅H₄-CO-Met-OH]₂ (6e) and Fc-CO-Met-OH (7e) were prepared and characterized. The solid state structures of 3a, 4b, and 4e were determined by single crystal X-ray diffraction. Compound 3a shows a 1,3′ substitution pattern on the Cp rings in the solid state. Structures in solution were determined by NMR, IR and CD spectroscopy, with particular emphasis on the question of hydrogen bonding and helical chirality of the metallocene. As an example, the full assignment for the Cp signals in the disubstituted derivative 3a was achieved by simulation of the ¹H NMR signals from the cyclopentadienyl ring in combination with 2D-NOESY spectra. In solution, 3a has the known 1,2′ substitution pattern, which is stabilized by intramolecular hydrogen bonds.     

A highly stereoselective preparation of CF3-substituted 1-aryl-1,2-diphenylethenes: application to the synthesis of panomifene

β-CF₃-α,β-diphenylvinyl sulfide 3a was prepared stereoselectively in 77% yield from the reaction of 2 with phenyllithium at room temperature for 5 h. Oxidation of 3a with MCPBA afforded the corresponding vinyl sulfone 4a, in which (E)-4a can be crystallized in a mixture of CH₂Cl₂ and hexane. The addition-elimination reaction of (E)-4a with phenyllithium having substituents on the benzene ring provided 5a-j in 51-82% yields stereospecifically. Similarly, the treatment of (E)-4a with p-chloroethoxyphenyllithium in the presence of 12-crown-4 (20 mol %) at −10 °C, followed by slowly warming to room temperature, resulted in the formation of the corresponding panomifene precursor 6 in 82% yield.     

Cation-anion interactions involving hydrogen bonds: Syntheses and crystal structures study of hexafluorotitanate(IV) salts with pyridine and methyl substituted pyridines

Fluorotitanates (LH)₂[TiF₆]·nH₂O (1: R = pyridine, n = 1, 2: R = 2-picoline, n = 2, 3: R = 2,6-lutidine, n = 0, 4: R = 2,4,6-collidine, n = 0) and (LH)[TiF₅(H₂O)] (3a: L = 2,6-lutidine) have been synthesized by the reaction of pyridine or corresponding methyl substituted pyridines and titanium dioxide dissolved in hydrofluoric acid. The crystal structures of ionic compounds 1, 2, 3, 3a and 4 have been determined by single-crystal X-ray diffraction analysis. The hydrogen bonding led to the formation of discrete (LH)₂[TiF₆] units (4), chains (1-3), and layers (3a). The additional π-π interactions present in 1, 2, and 4 results in chain structures of 1 and 4 and in a layer structure of 2. The [TiF₆]²⁻ and [TiF₅(H₂O)]⁻ anions were observed by ¹⁹F NMR spectroscopy in aqueous solutions of 1, 2, 3, 3a and 4.     

α-Telluration of 2,4,6-trimethylacetophenone under mild conditions: Role of steric factor in the solid state structures of Te(II and IV) compounds

Elemental tellurium inserts into the C_sp3-Br bond of α-bromomesitylmethyl ketone and due to its strong carbophilic character affords the crystalline C-tellurated derivative of 2,4,6-trimethylacetophenone, (MesCOCH₂)₂TeBr₂, 1b in over 80% yield. Electrophilic substitution of the parent ketone with aryltellurium trichlorides, at room temperature, gives nearly quantitative yields of unsymmetrical alkylaryltellurium dichlorides (MesCOCH₂)ArTeCl₂ (Ar = mesityl, Mes, 2a; 1-naphthyl, Np, 3a; anisyl, Ans, 4a). Fairly stable mesitoylmethyltellurium(II) derivatives, (MesCOCH₂)₂Te, 1 and (MesCOCH₂)ArTe (Ar = Mes, 2; Np, 3 and Ans, 4) obtained as the reduction products of their dihalotellurium(IV) analogues, readily undergo oxidative addition of dihalogens to afford the corresponding (MesCOCH₂)₂TeX₂ (X = Cl, 1a; Br 1b; I, 1c) and (MesCOCH₂)ArTeX₂ (X = Cl, Br, I, Ar = Mes, 2a, 2b, 2c; Np, 3a, 3b, 3c and Ans, 4a, 4b, 4c). Crystallographic structural characterization of 1, 1b, 2, 2a, 2b, 2c, 3, 3a and 4c illustrates that the steric demand of mesityl group appreciably influences primary geometry around the 5-coordinate Te(IV) atom when it is bound directly to it. It also makes the Te atom inaccessible for the ubiquitous Te?X intermolecular secondary bonding interactions that result in supramolecular structures. In the crystal lattice of symmetrical telluroether 1, an interesting supramolecular synthon based upon reciprocatory weak C-H?O H-bonding interaction gives rise to chains via self-assembly.     

CpCo(dithiolene) complexes of highly flexible oxddt ligand with two different Z-shaped and U-shaped structures

[CpCo(oxddt)] complex (2, oxddt = o-xylenediyldithioethylene-1,2-dithiolate, Cp = η⁵-cyclopentadienyl) was obtained from o-xylenediyldithioethylene-1,3-dithiol-2-one (OC(oxddt)) (1). 2 further reacted with diazoalkanes (N₂CHR) to form some alkylidene-bridged adducts [CpCo(CHR)(oxddt)] (R = H (3a), SiMe₃ (3b)). Adduct 3a further reacted with protic acids (HX) to give some S-methylated adducts [CpCo(X)(oxddt)(S-Me)] (X = Cl (4a), OCOCF₃ (4c)), followed by the Co-C bond cleavage in the three-membered cobaltathiirane ring. Two different Z-shaped and U-shaped molecular structures were observed by X-ray diffraction studies. In the former structure (Z), the dithiolene and o-xylylene planes are located at almost parallel position each other, and in the latter structure (U), both planes are not parallel but the o-xylylene moiety is located closer to the dithiolene plane than the Z-shaped one. The Z-shaped structure involves 1 and 2. The U-shaped structure involves 3a, 3b, 4a and 4c. Complex 1 showed a one-dimensional chain through intermolecular π-π interaction in the crystal. Complex 2 had a dimeric interaction between dithioethylenedithiolate moieties (S₂C₂S₂) in the oxddt. The SiMe₃ group in 3b was placed at an exo-position with respect to the cobaltadithiolene ring due to a steric hindrance from the U-shaped oxddt ligand. In 4a, the X and Me groups are located at the opposite side of the dithiolene plane (anti-form) but in 4c, both groups are presented at the same side of the dithiolene plane (syn-form). The NMR analysis of 4a in solution indicated existence of both anti- and syn-isomers (7:1).