Comparative study on coating CdSe nanocrystals with surfactants

We have synthesized CdSe nanocrystals (NCs) in sizes from 2.2 to 5.1 nm passivated with hydrophobic trioctylphosphine oxide (TOPO) in combination trioctylphosphine (TOP) or tributylphosphine (TBP) to obtain particles of the type CdSe/TOPO/TOP or CdSe/TOPO/TBP. These NCs were then dispersed in aqueous solution of ionic or non-ionic surfactants (such as stearate, oleic acid, Tween) using a biphase (water and chloroform or hexane) transfer method. It is found that both the structure of the surfactant and the native surface of the ligand govern the coating of the NCs with surfactants. More specifically, the hydrophobicity-hydrophilicity balance of the surfactant regulates the coating efficacy, thereby transferring the NC from the organic to the aqueous phase. The type of ligand on the NCs and the kind of coating surfactant also affect photoluminescence (PL). The ratio of PL and absorbance unit (defined as PL per 0.1 AU) was implemented as a tool to monitor changes in PL intensity and wavelength as a function of size, coatings and surface defects. Finally, the distribution of CdSe nanocrystals between pseudophases in cloud point extraction was discussed based on experimental results. It was concluded that the size of CdSe nanocrystal present in an appropriate pseudophase is correlated with the way in which the non-ionic surfactant coats CdSe nanocrystals.

Synthesis and Characterization of CdSe Nanocrystals Capped by CdS

CdSe semiconductor nanocrystals capped by CdS were synthesized in the aqueous solution with 2-mercaptoethanol as the stabilizer. The CdS capping with a higher band-gap than that of the core crystallite has successfully eliminated the surface traps. Optical absorption and fluorescence emission spectra were used to probe the effect of CdS passivation on the electronic structure of the nanocrystals. The composite CdSe/CdS nanocrystals exhibit strong, narrow(FWHM≤40 nm) and stable band-edge photoluminescence. X-ray powder diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy were used to analyze the composite nanocrystals and determine their average size, size distribution, shape, internal structure and elemental composition.     

Enhancement of the photoluminescence of CdSe quantum dots during long-term UV-irradiation: privilege or fault in life science research?

The present study describes an impressive enhancement of the photoluminescence (PL) intensity of low-temperature synthesized CdSe nanocrystals (75 degrees C) during long-term UV-irradiation. The integrated PL-intensity of CdSe core and CdSe/ZnS core/shell nanocrystals, dispersed in chloroform, enhanced about 3 and 6 times, respectively, during 9 h exposure to UV-light, without any significant changes in the characteristic absorbance spectra and shifting of PL-spectra. After termination of the irradiation a comparatively slow photobleaching was detected with tau(1/2) = 6 h for CdSe core and tau(1/2) = 14 h for CdSe/ZnS core/shell nanocrystals. The most impressive was the effect of UV-irradiation on the photoluminescence of water-soluble CdSe nanocrystals. The integrated PL-intensity enhanced about 10 times during 11 h exposure to UV-light and the improved PL-intensity was preserved during 3 days after termination of the irradiation without any significant photobleaching. The results are discussed in the context of application of CdSe nanocrystals as novel fluorophores in life science experiments.     

Effects of electron tunneling and nonresonance quenching of photoluminescence in semiconducting CdSe/ZnS AND CdSe nanocrystals by porphyrin molecules in joint complexes

The quenching of photoluminescence (PL) in semiconducting CdSe/ZnS and CdSe nanocrystals (NC) of various sizes during surface passivation by molecules of tetrapyridylporphyrins (P) in toluene at 295 K was investigated. It was shown that resonance transfer of energy NC → P plays a minor role in PL quenching (<10%), while photoinduced electron transfer NC → P is absent. On the basis of experimental data and quantum-mechanical calculations it was established that with identical molar ratio x = C_P/C_NC the probability of quenching k _q decreases with increase in the size of the NC while the PL quenching process itself under conditions of quantum confinement is due to electron tunneling of the excited electron–hole pair on the surface of the NC followed by localization of the organic ligand (P) on anchor groups. The obtained results are of interest for investigating the mechanisms of the blinking of PL in single semiconductor nanocrystals. Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 45, No. 1, pp. 17–26, January–February, 2009.     

Control of photoluminescence properties of CdSe nanocrystals in growth

The photoluminescence (PL) quantum yield (QY) of CdSe nanocrystals during their growth under a given set of initial conditions increases monotonically to a certain maximum value and then decreases gradually. Such a maximum is denoted as a PL "bright point", which does not always overlap with the minimum point of the PL peak width for the same reaction. The experimental results suggest that the existence of the PL bright point is a general phenomenon during the growth of semiconductor nanocrystals and likely is a signature of an optimal surface structure/reconstruction of the nanocrystals grown under a given set of initial conditions. The position of the bright point, the highest PL QY, the types of the bright points (sharp or flat), the sharpness of the PL peak, etc., were all strongly dependent on the initial Cd:Se ratio of the precursors in the solution. A large excess of the selenium precursor, with 5-10 times more selenium precursor than the amount of the cadmium precursor, was found necessary to achieve a high PL QY value and a narrow emission profile. The existence of the PL bright point and the sensitive temporal variation of the PL QY during the growth of semiconductor nanocrystals can explain the unpredictable nature and poor reproducibility of the PL properties of the as-prepared semiconductor nanocrystals observed previously. Furthermore, the knowledge gained in this study enabled us to reproducibly synthesize highly luminescent CdSe nanocrystals through a relatively simple and safe synthetic scheme. In a traditionally weak emission window for CdSe nanocrystals, the orange-red optical window, the PL QY of the as-prepared CdSe nanocrystals reached as high as 85% at room temperature, and the full width at half-maximum of the corresponding PL peak was as narrow as 23 nm, about 65-80 meV depending on the emitting position. The PL properties of the as-prepared CdSe nanocrystals are stable upon aging for at least several months. These as-prepared nanocrystals represent a series of best emitters that are highly efficient, highly pure in emission color, stable, and continuously tunable by simply varying the size of the nanocrystals.     

Large-scale synthesis of nearly monodisperse CdSe/CdS core/shell nanocrystals using air-stable reagents via successive ion layer adsorption and reaction

Successive ion layer adsorption and reaction (SILAR) originally developed for the deposition of thin films on solid substrates from solution baths is introduced as a technique for the growth of high-quality core/shell nanocrystals of compound semiconductors. The growth of the shell was designed to grow one monolayer at a time by alternating injections of air-stable and inexpensive cationic and anionic precursors into the reaction mixture with core nanocrystals. The principles of SILAR were demonstrated by the CdSe/CdS core/shell model system using its shell-thickness-dependent optical spectra as the probes with CdO and elemental S as the precursors. For this reaction system, a relatively high temperature, about 220-240 degrees C, was found to be essential for SILAR to fully occur. The synthesis can be readily performed on a multigram scale. The size distribution of the core/shell nanocrystals was maintained even after five monolayers of CdS shell (equivalent to about 10 times volume increase for a 3.5 nm CdSe nanocrystal) were grown onto the core nanocrystals. The epitaxial growth of the core/shell structures was verified by optical spectroscopy, TEM, XRD, and XPS. The photoluminescence quantum yield (PL QY) of the as-prepared CdSe/CdS core/shell nanocrystals ranged from 20% to 40%, and the PL full-width at half-maximum (fwhm) was maintained between 23 and 26 nm, even for those nanocrystals for which the UV-vis and PL peaks red-shifted by about 50 nm from that of the core nanocrystals. Several types of brightening phenomena were observed, some of which can further boost the PL QY of the core/shell nanocrystals. The CdSe/CdS core/shell nanocrystals were found to be superior in comparison to the highly luminescent CdSe plain core nanocrystals. The SILAR technique reported here can also be used for the growth of complex colloidal semiconductor nanostructures, such as quantum shells and colloidal quantum wells.     

Sol-Gel Synthesis of Hybrid Organic-Inorganic Monoliths Doped with Colloidal CdSe/ZnS Core-Shell Nanocrystals

Colloidal CdSe/ZnS core-shell nanocrystals, with a narrow size distribution, were dispersed in a hybrid sol resulting from the hydrolysis of tetraethylorthosilicate and 3-glycidoxypropyltrimethoxysilane (GLYMO). In order to reduce the gelation time and the exposure of the nanoparticles to air, several catalysts of the GLYMO epoxy ring opening were employed for the sol preparation, such as imidazole, methyl-imidazole, pyridine, benzylamine, propylamine. The role of the various catalysts was monitored by optical absorption measurements in the near infrared region, by observing the evolution of the epoxy bands. Imidazole was found to provide the fastest gelation and the best results in terms of bubble disappearance from the gel structure. The variation in the optical properties of the semiconductor nanoparticles embedded in the matrix was monitored as a function of the gelation time and was compared to the optical absorption and photoluminescence spectra of the nanoparticles dissolved in a chloroform solution. A decrease in the gelation-time results in a closer resemblance between the optical properties of the CdSe/ZnS doped monoliths and those of the particles dissolved in the solvent, before incorporation in the matrix. The photoluminescence of the CdSe/ZnS nanocrystals is not bleached after they are trapped in the glassy matrix.     

Preparation and application of L-cysteine-modified CdSe/CdS core/shell nanocrystals as a novel fluorescence probe for detection of nucleic acid

The water-soluble L-cysteine-modified CdSe/CdS core/shell nanocrystals (expressed as CdSe/CdS/Cys nanocrystals) have been synthesized in aqueous by using L-cysteine as stabilizer. The size, shape, component and spectral property of CdSe/CdS/Cys nanocrystals were characterized by high-resolution transmission electron microscope (HRTEM), energy dispersive X-ray fluorescence (EDX), infrared spectrum (IR) and photoluminescence (PL). The results showed that the spherical CdSe/CdS/Cys nanocrystals with an average diameter of 2.3 nm have favorable fluorescent property, theirs photostability and fluorescence intensity are enhanced greatly after overcoating with CdS. The cysteine modified on the surface of core/shell CdSe/CdS nanocrystals renders the nanocrystals water-soluble and biocompatible. Based on the fluorescence quenching of the nanocrystals in the presence of calf thymus deoxyribonucleic acid (ct-DNA), a fluorescence quenching method has been developed for the determination of ct-DNA by using the nanocrystals as a novel fluorescence probe. The pH value of the system was selected at pH 7.4, with excitation and emission wavelength at 380 and 522 nm, respectively. Under the optimal conditions, the fluorescence quenching intensity of the system is linear with the concentration of ct-DNA in the range of 0.1-3.5 microg/mL (r=0.9987). The detection limit is 0.06 microg/mL. And two synthetic samples were analyzed satisfactorily.     

水溶性的CdSe/CdS/ZnS量子点的合成及表征

用L-半胱氨酸盐(Cys)作为稳定剂,合成了水溶性的双壳结构的CdSe/CdS/ZnS半导体量子点。吸收光谱和荧光光谱结果表明,双壳结构的CdSe/CdS/ZnS纳米微粒比单一的CdSe核纳米粒子和单核壳结构的CdSe/CdS纳米粒子具有更优异的发光特性。用透射电子显微镜(TEM)、ED、XRD、XPS和FTIR等方法对CdSe核和双壳层的CdSe/CdS/ZnS纳米微粒的结构、分散性及形貌分别进行了表征。     

无膦方法合成高质量CdSe纳米晶及其光学性质

以合成的十碳酸镉作为Cd前驱体, 十八烯作为单质硒溶剂, 并添加十八胺作为活性剂, 在无三丁基膦或三辛基膦参与的条件下, 以较低温度制备了具有闪锌矿结构的高质量的CdSe纳米晶. 利用吸收光谱、荧光光谱(PL)、X射线衍射(XRD)、透射电镜(TEM)对不同反应时间得到的CdSe纳米晶进行形貌和光谱性质表征. 实验结果表明, 采用该无膦法只需调控反应时间就可得到粒径均一、分散性好的CdSe纳米晶, 其荧光波长可覆盖470-630 nm的可见光区, 而荧光峰半高宽则始终保持在24-30 nm之间并具有较高的荧光量子产率(535 nm处大于60%). 最后, 对CdSe纳米晶量子产率随反应时间变化的原因进行了分析.     

水相中荧光CdSe纳米晶的优化合成与表征

Ⅱ-Ⅵ族半导体纳米粒子（也称半导体量子点（semiconductor quantum dots）简称NCs）由于其独特的光学、光化学、电化学以及非线性光学性质已逐渐引起人们的广泛关注。而Ⅱ-Ⅵ族NCs最诱人的 潜在应用是作为荧光探针应用于生物体系,在生命科学研究中起到定性和定量标记分子和细胞的作用。     

A new route to zinc-blende CdSe nanocrystals: mechanism and synthesis

We report the possible mechanism of forming of CdSe nanocrystals in the high boiling point solvents with long alkane chains and a novel Non-TOP-Based route to zinc-blende CdSe nanocrystals. A new mechanism shows that there exits a redox reaction in the long alkane chain solvents: Se is reduced to H2Se gas; at the same time, the long alkane chains are oxidated to alkene chains; then, the Cd complex reacts with H2Se to form CdSe nanocrystals. Possible chemical reaction equations involved in the process of forming the CdSe nanocrystals have been discussed. The alkene chain and H2Se were detected respectively by a series of experiments to support the new mechanism. Under the guidance of this mechanism, we have developed a much cheaper and greener Non-TOP-Based route for the synthesis of a size series of high-quality zinc-blende (cubic) CdSe nanocrystals. Low-cost, green, and environmentally friendlier reagents are used, without use of expensive solvents such as trioctylphosphine (TOP) or tributylphosphine (TBP). The new route enables us to achieve high-quality CdSe nanocrystals with sharp ultraviolet and visible (UV-vis) absorption peaks, controllable size (2.0-5.0 nm), bright photoluminescence (PL), narrow PL full width of half-maximum (fwhm) (29-48 nm), and high PL quantum yield (up to 60%) without any size sorting.     

水溶性的CdSe/ZnS纳米微粒的合成及表征

用L-半胱氨酸(Cys)作为稳定剂，合成了水溶性的CdSe/ZnS核壳结构的半导体纳米微粒。吸收光谱和荧光光谱表明，CdSe/ZnS纳米微粒比单一的CdSe纳米粒子具有更优异的发光特性。透射电子显微镜（TEM）、ED和XPS表征了CdSe/ZnS纳米微粒的结构、分散性及形貌。红外光谱证实半胱氨酸分子中的硫原子和氧原子参加了与纳米粒子表面的金属离子的配位作用。     

十六烷基胺稳定的CdSe纳米晶体的合成与表征

用CdO通过高温化学方法制备了具有高发光特性的CdSe胶体纳米晶.通过改变配体十六烷基胺在反应体系中的含量,合成了3种不同粒径的CdSe纳米晶.利用TEM、XRD和光谱等手段对合成出来的CdSe纳米晶的形貌结构和发光特性进行了表征.结果表明,随着十六烷基胺在反应体系中量的增多,CdSe纳米晶的粒径增大.通过调整十六烷基胺在反应体系中的量可以方便地控制纳米晶的尺寸.     

纳米CdSe与聚4-乙烯基吡啶盐的复合与表征

用巯基乙酸作稳定剂在水相中合成了CdSe纳米颗粒. 聚4-乙烯基吡啶季铵盐(PVPNI)通过静电作用与CdSe纳米颗粒复合形成了纳米复合材料.该复合材料通过红外光谱数据（IR）、电感耦合等离子发射光谱（ICP-AES）、透射电镜（TEM）等方法进行了表征,并通过紫外可见吸收光谱(UV-Vis)和荧光光谱(PL)对其光学性质进行了研究.结果表明,复合材料的形成,改善了纳米CdSe的分散性,并提高了纳米CdSe的荧光强度.     

Single-source precursor route for overcoating CdS and ZnS shells around CdSe core nanocrystals

We reported a facile route for overcoating CdS and ZnS shells around colloidal CdSe core nanocrystals. To synthesize such double shelled core/shell nanocrystals, first, CdSe core nanocrystals were prepared in a much “greener” and cheap route, which did not involve the use of hazardous and expensive trioctylphosphine. Then, a low-cost and labor-saving route was adopted for the CdS and ZnS shell growth with the use of thermal decomposition of commercial available air stable single-source precursors cadmium diethyldithio-carbamate and zinc diethyldithiocarbamate in a non-coordinating solvent at intermediate temperatures. Powder X-ray diffraction patterns and transmission electron microscopy images confirm the epitaxial growth of the shell in the core/shell nanocrystals. The photoluminescence quantum yield of the resulting CdSe/CdS/ZnS core/shell nanocrystals can be as high as 90% in organic media and up to 60% after phase transfer into aqueous media. By varying the size of CdSe cores, the emission wavelength of the obtained core/shell nanostructures can span from 554 to 636 nm.     

Synthesis and Characterization of ZnS：Ag Nanocrystals Surface-capped with Thiourea

Ag^＋ -doped ZnS nanocrystals surface-capped with thiourea （expressed as ZnS： Ag/thiourea） were synthesized through sol-gel method with thiourea as a surface modifier and characterized by X-ray diffraction（XRD）, transmission electron microscope（TEM）, X-ray fluorescence spectrum（XRF）, infrared spectrum （IR）, UV-Vis absorption spectrum（ UV-Vis）, and photoluminescence spectrum（PL）. The results show that Ag^＋ ions are doped in ZnS nanocrystals, and the sulfur atoms in thiourea molecules coordinate with metal ions on the surface of the nanocrystals. The spherical ZnS： Ag/thiourea nanocrystals with an average diameter of 5 nm have good fluorescent characteristics, and therefore have great potential for use in molecular assembly and novel luminescence materials.     

水溶性的高荧光CdTe/CdSeⅡ型核壳量子点的合成与表征

用L-半胱氨酸(L-cysteine)作为稳定剂,以制备的CdTe量子点为核模板,水相合成了具有近红外发光的Ⅱ型核壳CdTe/CdSe半导体量子点。实验考察了合成温度,核模板的尺寸和组分比等因素对合成高质量的CdTe/CdSe量子点的影响。用紫外-可见吸收和荧光光谱研究了合成的量子点的光学性质。在优化的合成条件下,荧光发射光谱在586～753nm范围连续可调,荧光量子产率高达68%;通过X-射线衍射(XRD),X射线光电子能谱(XPS)和透射电镜(TEM)对合成的Ⅱ型核壳CdTe/CdSe量子点进行了结构和形貌表征。     

利用离子型Cd源制备ZnSe/CdSe核-壳结构纳米晶

在有机相体系中利用ZnSe前驱体纳米晶制备过程中的富Se环境,以引入Cd2+的方式在相对温和的环境下通过控制Cd2+离子的加入量及调节反应时间,成功制备了ZnSe/CdSe核-壳复合结构纳米晶.利用X射线衍射(XRD)、透射电镜(TEM)、紫外-可见吸收光谱(UV-vis)和荧光光谱(FL)对其结构形貌以及光学性质进行表征和分析的结果表明,CdSe以外延生长的方式包覆在ZnSe纳米晶表面从而形成具有良好结晶性的核-壳复合结构,其荧光发射始终保持良好单色性,同时实现了在500～620nm可见光范围内的连续可调.