Study of enrichment factors for six β‐blockers in aliphatic alcohols by hollow‐fiber liquid‐phase microextraction

The selectivity of a suitable organic solvent is key for extraction in liquid‐phase microextraction experiments. Nevertheless, the screening process remains a daunting task. Our research aimed to study the relationship between extraction efficiency and extraction solvents, analytes, and finally select the appropriate extraction solvent. In the present article, β‐blockers and six extraction solvents were chosen as the models and hollow‐fiber liquid‐phase microextraction was conducted. The relationship was built by statistical analysis on the data. Factors affecting extraction efficiency including the logarithms of the octanol/water partition coefficient (logP_o/w) of analytes, acid dissociation constants, the logarithms of the octanol/water partition coefficient of solvents and pH of the sample solution were investigated. The results showed that a low water solubility of extraction solvent is the foundation to ensure higher extraction efficiency. Moreover, when ΔlogP_o/w > 0, a higher extraction efficiency is observed at lower ΔlogP_o/w, on the contrary, when ΔlogP_o/w < 0, extraction efficiency is higher as the absolute value of ΔlogP_o/w becomes greater. Finally, the relationship between enrichment factor and extraction solvents, analytes was established and a helpful guidance was provided for the selection of an optimal solvent to obtain the best extraction efficiency by liquid‐phase microextraction.     

Determination of Octanol–Water Partition Coefficients,Water Solubility and Vapour Pressures of Alkyl-lead Compounds

Physico-chemical properties of alkyl-lead compounds, namely aqueous solubility, octanol–water partition coefficient ( K _ow), vapour pressure and Henry's Law constant, have been determined. Vapour pressures of trialkyl-lead salts at different temperatures were measured by a gas-saturation technique in which air was passed slowly through a glass column packed with pure solid alkyl-lead compounds. K _ow of tetra-alkyl-lead (TAL) and trialkyl-lead (TriAL) were determined under different salinity and pH conditions, and the latter were related to the species (R₃Pb⁺, R₃PbOH⁰ or R₃PbCl⁰) dominating under a particular set of conditions. Regression calculations incorporating melting point corrections relate water solubility to K _ow, and provide a means of estimating either parameter for a wider range of compounds.     

Solvation in octanol: parametrization of the continuum MST model

This study reports the parametrization of the HF/6‐31G(d) version of the MST continuum model for n‐octanol. Following our previous studies related to the MST parametrization for water, chloroform, and carbon tetrachloride, a detailed exploration of the definition of the solute/solvent interface has been performed. To this end, we have exploited the results obtained from free energy calculations coupled to Monte Carlo simulations, and those derived from the QM/MM analysis of solvent‐induced dipoles for selected solutes. The atomic hardness parameters have been determined by fitting to the experimental free energies of solvation in octanol. The final MST model is able to reproduce the experimental free energy of solvation for 62 compounds and the octanol/water partition coefficient (log P_ow) for 75 compounds with a root‐mean‐square deviation of 0.6 kcal/mol and 0.4 (in units of log P), respectively. The model has been further verified by calculating the octanol/water partition coefficient for a set of 27 drugs, which were not considered in the parametrization set. A good agreement is found between predicted and experimental values of log P_o/w, as noted in a root‐mean‐square deviation of 0.75 units of log P. © 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1180–1193, 2001     

1‐Octanol/Water Partition Coefficients of 1Alkyl‐3‐methylimidazolium Chloride

The solubilities of 1alkyl‐3‐methylimidazolium chloride, [C_nmim][Cl], where n=4, 8, 10, and 12, in 1octanol and water have been measured by a dynamic method in the temperature range from 270 to 370 K. The solubility data was used to calculate the 1octanol/water partition coefficients as a function of temperature and alkyl substituent. The melting point, enthalpies of fusion, and enthalpies of solid–solid phase transitions were determined by differential scanning calorimetry, DSC. The solubility of [C_nmim][Cl], where n=10 or 12 in 1octanol is comparable and higher than that of [C₄mim][Cl] in 1octanol. Liquid 1n‐octyl‐3‐methylimidazolium chloride, [C₈mim][Cl], is not miscible with 1octanol and water, consequently, the liquid–liquid equilibrium, LLE was measured in this system. The differences between the solubilities in water for n=4 and 12 are shown only in α₁ and γ₁ solid crystalline phases. Additionally, the immiscibility region was observed for the higher concentration of [C₁₀mim][Cl] in water. The intermolecular solute–solvent interaction of 1butyl‐3‐methylimidazolium chloride with water is higher than for other 1alkyl‐3‐methylimidazolium chlorides. The data was correlated by means of the UNIQUAC ASM and two modified NRTL equations utilizing parameters derived from the solid–liquid equilibrium, SLE. The root‐mean‐square deviations of the solubility temperatures for all calculated data are from 1.8 to 7 K and depend on the particular equation used. In the calculations, the existence of two solid–solid first‐order phase transitions in [C₁₂mim][Cl] has also been taken into consideration. Experimental partition coefficients (log P) are negative at three temperatures; this is evidence for the possible use of these ionic liquids as green solvents.     

Functionalization of polyesters with multiple B vitamins

A method to covalently attach combinations of six different B vitamins provided an avenue to new functional thermosets without multi‐step coupling reactions. The melt polymerization strategy required no organic solvent and facilitated covalent attachment of OH (B₁, B₂, B₅, B₆) or COOH (B₇, B₉) groups on B vitamins via Fischer esterification. Characterization of model reactions with LC/MS, FTIR, and GPC confirmed covalent attachment. Based on control experiments, B vitamins demonstrated unexpected thermal stability and appreciable solubility in the melt polymerization. This approach was demonstrated with citric acid and diglycerol, but has wide‐ranging potential for other polar monomers with negative octanol–water partition coefficients (LogP). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3308–3316     

Determination of partition coefficient and analysis of nitrophenols by three‐phase liquid‐phase microextraction coupled with capillary electrophoresis

A three‐phase hollow fiber liquid‐phase microextraction method coupled with CE was developed and used for the determination of partition coefficients and analysis of selected nitrophenols in water samples. The selected nitrophenols were extracted from 14 mL of aqueous solution (donor solution) with the pH adjusted to pH 3 into an organic phase (1‐octanol) immobilized in the pores of the hollow fiber and finally backextracted into 40.0 μL of the acceptor phase (NaOH) at pH 12.0 located inside the lumen of the hollow fiber. The extractions were carried out under the following optimum conditions: donor solution, 0.05 M H₃PO₄, pH 3.0; organic solvent, 1‐octanol; acceptor solution, 40 μL of 0.1 M NaOH, pH 12.0; agitation rate, 1050 rpm; extraction time, 15 min. Under optimized conditions, the calibration curves for the analytes were linear in the range of 0.05–0.30 mg/L with r²>0.9900 and LODs were in the range of 0.01–0.04 mg/L with RSDs of 1.25–2.32%. Excellent enrichment factors of up to 398‐folds were obtained. It was found that the partition coefficient (K_a/d) values were high for 2‐nitrophenol, 3‐nitrophenol, 4‐nitrophenol, 2,4‐dinitrophenol and 2,6‐dinitrophenol and that the individual partition coefficients (K_org/d and K_a/org) promoted efficient simultaneous extraction from the donor through the organic phase and further into the acceptor phase. The developed method was successfully applied for the analysis of water samples.     

The Partition Coefficient of Protonated Antihistamines. Its calculation and interpretation in terms of hydrophobic fragmental constants

The octanol/water partition coefficient (P₊) of nineteen monoprotonated antihistaminic drugs has been measured. These values are compared with the partition coefficient (P) of the neutral molecules, suggesting the variations in partition coefficient seen upon protonation to obey simple rules. Indeed, the (log P–log P₊) values are multiples of a constant term 0.28 (Rekker's ‘magic constant’ c_M[6]), each functional group contributing with a fixed incremental value. The incremental values are confirmed by multiple linear regression analysis, and their physical significance is discussed.     

Freeze-out extraction of monocarboxylic acids from water into acetonitrile under the action of centrifugal forces

It is established that the efficiency of the freezing-out extraction of monocarboxylic acids С₃–С₈ and sorbic acid from water into acetonitrile increases under the action of centrifugal forces. The linear growth of the partition coefficient in the homologous series of С₂–С₈ acids with an increase in molecule length, and the difference between the efficiency of extracting sorbic and hexanoic acid, are discussed using a theoretical model proposed earlier and based on the adsorption–desorption equilibrium of the partition of dissolved organic compounds between the resulting surface of ice and the liquid phase of the extract. The advantages of the proposed technique with respect to the degree of concentration over the method of low-temperature liquid-liquid extraction are explained in light of the phase diagram for the water–acetonitrile mixture.     

Determination of the n‐octanol/water partition coefficients of weakly ionizable basic compounds by reversed‐phase high‐performance liquid chromatography with neutral model compounds

A strategy to utilize neutral model compounds for lipophilicity measurement of ionizable basic compounds by reversed‐phase high‐performance liquid chromatography is proposed in this paper. The applicability of the novel protocol was justified by theoretical derivation. Meanwhile, the linear relationships between logarithm of apparent n‐octanol/water partition coefficients (logK_ow′′) and logarithm of retention factors corresponding to the 100% aqueous fraction of mobile phase (logk_w) were established for a basic training set, a neutral training set and a mixed training set of these two. As proved in theory, the good linearity and external validation results indicated that the logK_ow′′–logk_w relationships obtained from a neutral model training set were always reliable regardless of mobile phase pH. Afterwards, the above relationships were adopted to determine the logK_ow of harmaline, a weakly dissociable alkaloid. As far as we know, this is the first report on experimental logK_ow data for harmaline (logK_ow = 2.28 ± 0.08). Introducing neutral compounds into a basic model training set or using neutral model compounds alone is recommended to measure the lipophilicity of weakly ionizable basic compounds especially those with high hydrophobicity for the advantages of more suitable model compound choices and convenient mobile phase pH control.     

Ionic liquid-based single-drop liquid-phase microextraction combined with high-performance liquid chromatography for the determination of sulfonamides in environmental water

A simple, rapid and environment‐friendly technique of single‐drop liquid‐phase microextraction has been developed for the determination of sulfonamides in environmental water. Several important parameters including stirring rate, extraction solvent, extraction pH, salinity and extraction time were optimized to maximize the extract efficiency. Extraction solvent 1‐octyl‐3‐methylimidazolium hexafluorophosphate [C₈MIM][PF₆] ionic liquid showed better extraction efficiency than 1‐butyl‐3‐methylimidazolium hexafluorophosphate [C₄MIM][PF₆] and 1‐octanol. The optimum experimental conditions were: pH, 4.5; sodium chloride content, 36% w/v; extraction time, 20 min. This method provided low detection limits (0.5–1 ng/mL), good repeatability (the RSD ranging from 4.2 to 9.9%, n=5) and wide linear range (1–1500 ng/mL), with determination coefficients (r²) higher than 0.9989 for all the target compounds. Real sample analysis showed relative recoveries between 63.5 and 115.8% for all the target compounds.     

Microemulsion electrokinetic chromatography as a suitable tool for lipophilicity determination of acidic,neutral, and basic compounds

In the present work, several MEEKC systems are studied to assess their suitability for lipophilicity determination of acidic, neutral, and basic compounds. Thus, several microemulsion compositions over a wide range of pH values (from 2.0 to 12.0), containing heptane, 1?butanol and different types and amounts of surfactant (SDS or sodium cholate: from 1.3 to 3.3%) are characterized using Abraham's solvation model. The addition of acetonitrile (up to 10%) is also studied, since it increases the resolution of the technique for the most lipophilic compounds. The system coefficients obtained are very similar to those of the 1?octanol/water, used as the reference lipophilicity index, allowing simple and linear correlations between the 1?octanol/water partition values (log P_o/w) and MEEKC mass distribution ratios (log k_MEEKC). Variations in the microemulsion composition (aqueous buffer, surfactant, concentration of ACN) did not significantly affect the similarity of the MEEKC systems to log P_o/w partition.     

Pulsed Electrical Discharges in Water: Can Non-volatile Compounds Diffuse into the Plasma Channel?

The objective of this research effort is to develop a more comprehensive understanding of how molecules get degraded in plasma during an electrical discharge in water. The study correlates the intensity of hydroxyl (OH) radicals in the plasma and physicochemical properties of aqueous solutions of methanol, ethanol, acetonitrile, acetone, dimethyl sulfoxide (DMSO), dimethyl formamide (DMF), phenol, hydroquinone, caffeine, and bisphenol A (BPA). To determine the tendency of the used compounds to penetrate the plasma, their vapor pressures, Henry’s constants, aqueous solubilities, reaction rate constants with OH radicals, and octanol–water partition coefficients are compared and correlated with plasma spectroscopic and hydrogen peroxide (H₂O₂) measurements. OH radicals are precursors to the formation of hydrogen peroxide and any compound that diffuses into the plasma will react with and lower the intensity of OH radicals and therefore the concentration of hydrogen peroxide in the bulk liquid. Optical emission spectroscopy (OES) reveals that all the used compounds diffuse inside the plasma channel regardless of their vapor pressure where they get oxidized (primarily by OH radicals) and thermally degraded. Results also indicate that hydrophobicity (i.e., octanol–water partition coefficient) is the most important property that determines a compound’s tendency to diffuse inside the plasma channel; hydrophobic compounds readily penetrate the plasma whereas hydrophilic compounds tend to stay in the bulk liquid. The rate of formation of hydrogen peroxide is independent of the type of the compound present in the bulk liquid which confirms that this molecule is formed at the plasma interface.     

Ultrasound‐assisted,hybrid ionic liquid,dispersive liquid–liquid microextraction for the determination of insecticides in fruit juices based on partition coefficients

An ultrasound‐assisted, hybrid ionic liquid, dispersive liquid–liquid microextraction method coupled to high‐performance liquid chromatography with a variable‐wavelength detector was developed to detect ten insecticides, including diflubenzuron, triflumuron, hexaflumuron, flufenoxuron, lufenuron, diafenthiuron, transfluthrin, fenpropathrin, γ‐cyhalothrin and deltamethrin, in fruit juices. In this method, an appropriate extraction solvent was chosen based on the partition coefficient of the target compounds. A mixture of 1‐octyl‐2,3‐dimethylimidazolium bis(trifluoromethylsulfonyl)imide and 1‐hexyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide was used as the extractant. The extraction efficiency was screened using Plackett–Burman design and optimized using central composite design. Under the optimal conditions, good linearity was obtained for all the analytes in the pure water model and the fruit juice samples. In pure water, the recoveries of the ten insecticides ranged from 85.7 to 108.9%, with relative standard deviations for one day ranging from 1.24 to 2.64%. The limits of detection were in the range of 0.19–0.69 μg/L, and the enrichment factors were in the range of 123–160. The logarithm of the n‐octanol/water partition coefficient in this experiment is a useful reference to select a suitable extraction solvent, and the proposed technique was applied for the analysis of ten insecticides in fruit juice with satisfactory results.     

三嗪类化合物溶解度参数及毒性构－效关系

测定了１２种三嗪类化合物的水溶解度，辛醇水分配系数和对发光菌的毒性，并用分子连结性指数建立了预测三嗪类化合物的溶解度，辛醇水分配系数及对发光菌毒性的定量结构活性相关方程，其中１０种化合物文献中未见报道。     

Lipophilicity Modulations by Fluorination Correlate with Membrane Partitioning

Bioactive compounds generally need to cross membranes to arrive at their site of action. The octanol-water partition coefficient (lipophilicity, logP_OW) has proven to be an excellent proxy for membrane permeability. In modern drug discovery, logP_OW and bioactivity are optimized simultaneously, for which fluorination is one of the relevant strategies. The question arises as to which extent the often subtle logP modifications resulting from different aliphatic fluorine-motif introductions also lead to concomitant membrane permeability changes, given the difference in molecular environment between octanol and (anisotropic) membranes. It was found that for a given compound class, there is excellent correlation between logP_OW values with the corresponding membrane molar partitioning coefficients (logK_p); a study enabled by novel solid-state ¹⁹F NMR MAS methodology using lipid vesicles. Our results show that the factors that cause modulation of octanol-water partition coefficients similarly affect membrane permeability.