Green multicomponent reaction for synthesis of trisubstituted pyrroles in ionic liquid [bmim]BF<Subscript>4</Subscript>

2,4,5-Trisubstituted pyrrole derivatives were efficiently synthesized by one-pot condensation of 1,3-diones, α-bromoacetophenones, and ammonium acetate in ionic liquid [bmim]BF₄. The new synthetic method offers multisubstituted pyrroles with the advantages of mild reaction conditions, operational simplicity, higher yield, and environmental friendliness.     

Cationic ring-opening polymerization of 3,3-bis（chloromethyl）oxacyclobutane in ionic liquids

Cationic ring-opening polymerization of 3,3-bis(chloromethyl)oxacyclobutane catalyzed by BF_3·OEt_2 was carried out in ionic liquids [bmim]BF_4 and [bmim]PF_6.The influences of BCMO concentration and molar ratio of BCMO/BF_3·OEt_2 on the molecular weights and yield of PBCMO were investigated.The polymerization in ionic liquids proceed to high conversions,although molecular weights are limited,similar to polymerization in organic solvent such as CH_2Cl_2.Follow a viewpoint of green chemistry, we feel ionic liquid [bmim]BF_4 is superior to [bmim]PF_6.Extracting [bmim]PF_6 from the product using organic solvent as extractant limits its advantage as a green reaction media.     

A comparative study on the ionic liquid [bmim][BF4] and its solution with transient absorption spectroscopy

A detailed study was explored to compare the transient absorption spectra of the neat 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]) with its solution in water or acetonitrile. It was concluded that the excited triplet state ³[bmim]^+* was produced after 266 nm laser irradiation, and then the neutral radical [bmim] and the cation radical [bmim] ²⁺ were formed through two possible paths. The transient absorption spectra of the neat [bmim][BF₄] and its solution were similar but the reaction kinetics were different due to their different local structures such as dimeric or cluster. The energy transfer between excited [bmim][BF₄] and β-carotene further affirmed the existence of ³[bmim]^+*. And the reaction that the hydrated electron captured by [bmim]⁺ to produce [bmim] in solution was observed.     

Optical and Bioelectrochemical Characterization of Water‐Miscible Ionic Liquids Based Composites of Multiwalled Carbon Nanotubes

Acidic treated multiwalled carbon nanotubes (AMWNTs) were ground with water‐miscible room temperature ionic liquids, 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([bmim]BF₄), and resulted in AMWNTs‐[bmim]BF₄ composite. Its electrical‐ionic conductivity and optical properties were compared with the other two types of carbon materials‐[bmim]BF₄ composites: pyrolytic graphite powder (PGP), pristine multiwalled carbon nanotubes (PMWNTs), through the ac impedance technology and Raman spectroscopy. The impedance data show that AMWNTs‐[bmim]BF₄ composite exhibits the highest conductivity. Raman spectra study exhibits that the [bmim]BF₄ can form gel with PMWNTs and AMWNTs but only form a viscous liquid with PGP. AMWNTs‐[bmim]BF₄ gel modified GC electrode was applied in direct electrochemistry of heme proteins (Hb and HRP) and it catalysis to the reduction of H₂O₂ was investigated.     

One‐Pot Synthesis of Hydroxy Pyrazolo[1,2‐a][1,2,4]triazoles and Their Dehydration Using Recyclable Ionic Liquids as Reaction Media

An eco‐friendly, simple, and efficient one‐pot new procedure has been developed for the synthesis of hydroxy phenylhexahydropyrazolo[1,2‐a][1,2,4]triazoles by condensation of 4‐phenylurazole, aldehydes, and ethyl/methyl acetoacetate using ionic liquid [bmim]BF₄ in presence of l ‐proline at 80°C. The hydroxy pyrazolo[1,2‐a][1,2,4]triazoles could be dehydrated in presence of [bmim]HSO₄ to give corresponding phenyltetrahydropyrazolo[1,2‐a][1,2,4]triazoles in high yields. High yields, less reaction time, operational simplicity, and recyclability of reaction media are the advantages of this protocol.     

Chemoselective reduction of aromatic nitro and azo compounds in ionic liquids using zinc and ammonium salts

Nitroarenes were chemoselectively reduced to the corresponding amines using zinc and aqueous ammonium salts in ionic liquids as a safe and recyclable reaction medium. Our results specify the effect of ammonium salts in the process; the combination of Zn/NH₄Cl in [bmim][PF₆] or Zn/HCO₂NH₄ in [bmim][BF₄] were the suitable conditions for the reduction of nitroarenes. Azobenzenes were also smoothly reduced to hydrazobenzenes with Zn/HCO₂NH₄ (aq.) in recyclable [bmim][BF₄] without any over reduction to the corresponding anilines.     

Microwave‐assisted ring‐opening polymerization of trimethylene carbonate in the presence of ionic liquid

Microwave‐assisted ring‐opening polymerization (MROP) of trimethylene carbonate in the presence of 1‐n‐butyl‐3‐methylimidazolium tetrafluoroborate ([bmim]BF₄) ionic liquid was investigated. In the presence of 5 wt % [bmim]BF₄, poly (trimethylene carbonate) (PTMC) with a number‐average molar mass (M_n) of 36,400 g/mol was obtained at 5 W for only 60 min. The M_n of PTMC synthesized in the presence of [bmim]BF₄ was much higher than that produced in bulk at the same reaction time. In addition, compared with those produced by conventional heating, the M_n of PTMC and monomer conversion by MROP with or without [bmim]BF₄ were both higher. Thermal properties of the resulting PTMC were characterized by differential scanning calorimetry. Under microwave irradiation in the presence of ionic liquid, the polymerization could be carried out efficiently and effectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5857–5863, 2007     

Oxidation of aromatic aldehydes and ketones by H2O2/CH3ReO3 in ionic liquids: a catalytic efficient reaction to achieve dihydric phenols

A convenient and efficient application of hydrogen peroxide/methyltrioxorhenium in ionic liquids [bmim]BF₄ and [bmim]PF₆ for the oxidation of hydroxylated and methoxylated benzaldehydes and acetophenones to the corresponding phenols is described. Good yields of products were obtained in short reaction times.     

A characteristic effect of pressure on inclusion complexation of phenothiazine dyes with p-sulfonatocalix[6]arene in a room-temperature ionic liquid

The inclusion complexation of p-sulfonatocalix[6]arene (Calix-S6) with three kinds of phenothiazine dyes was studied spectrophotometrically in a mixture of a room-temperature ionic liquid [bmim]BF₄ (1-butyl-3-methylimidazolium tetrafluoroborate) and ethanol. We have determined the association constants of Calix-S6 with phenothiazine dyes under external static pressure up to 767 bar in the [bmim]BF₄-ethanol and alcohol-water mixtures. With increasing external pressure, the inclusion equilibrium in the alcohol-water mixtures was shifted to the dissociation side. Conversely, the inclusion equilibrium of methylene blue (MB) and azure A (AA) in the ionic liquid mixture was shifted to the association side. From the analysis of the pressure effects, the reaction volumes ΔV for inclusion complexation were estimated as −7 to 9 cm³ mol⁻¹ in the [bmim]BF₄-ethanol mixture and 20–32 cm³ mol⁻¹ in the alcohol-water mixtures. Based on the results, we have suggested that there is a competing complexation between the included dye and [bmim]BF₄ molecules in the ionic liquid.     

Ionic liquids/H2O systems for the reaction of epoxides with NaN3: a new protocol for the synthesis of 2-azidoalcohols

Oxiranes undergo ring opening rapidly with sodium azide in a [bmim]BF₄/H₂O or [bmim]PF₆/H₂O (2:1) solvent system, under mild and neutral reaction conditions to afford the corresponding 2-azidoalcohols in high to quantitative yields. The remarkable features of this procedure are improved yields, enhanced reaction rates, high regioselectivity and ease of recyclability of ionic liquids (ILs). The recovered ionic liquid can be reused for four to five times but with gradual decrease in activity.     

Enzymatic polyester synthesis in ionic liquids

The enzymatic synthesis of polyesters by ring-opening polymerization (ROP) and polycondensation in three ionic liquids, i.e., [bmim][Tf₂N], [bmim][PF₆] and [bmim][BF₄] was investigated. For the enzymatic ROP of ε-caprolactone it was found that [bmim][PF₆] and [bmim][BF₄] result in an inhomogeneous reaction mixture upon polymerization, causing polymerization characteristics similar to bulk polymerization. In contrast, for [bmim][Tf₂N] characteristics similar to toluene were observed. Molecular weights of 7000-9500 g/mol were obtained. In the polycondensation of dimethyl adipate and dimethyl sebacate, respectively, with 1,4-butanol the low volatility of ionic liquids was successfully utilized to perform the reactions in an open vessel at temperatures close to the boiling point of the condensation by-product. Molecular weights up to 5400 g/mol were obtained. This, in combination with the tunable solvent hydrophilicity of ionic liquids could offer an advantage in the polymerization of highly polar monomers with low solubility in organic solvents.     

Hydrotalcite catalysis in ionic liquid medium: a recyclable reaction system for heterogeneous Knoevenagel and nitroaldol condensation

Knoevenagel condensation proceeds efficiently in recyclable [bmim]PF₆ and [bmim]BF₄ without any catalyst, and hydrotalcites in ionic liquid serve as a safe and recyclable reaction system for both Knoevenagel as well as nitroaldol condensations.     

A Novel and Efficient One Pot Synthesis of 2,4‐Disubstituted Thiazoles and Oxazoles Using Phenyltrimethylammoniumtribromide in Ionic Liquid

A novel and efficient one‐pot procedure has been described for synthesis of 2,4‐disubstituted thiazoles and oxazoles from substituted ketones using phenyltrimethylammoniumtribromide as in situ brominating agent followed by reaction with thioamide/thiourea and amides/ureas, respectively in [bmim][BF₄] ionicliquid. The advantages of the procedure include avoiding the handling of lacrymetric compounds, hazardous and toxic organic solvents along with good to excellent yield of the products.     

Ionic Liquid as an Efficient and Recyclable Reaction Medium for the Synthesis of Pyrido[2,3‐d]pyrimidines

Ionic liquid [bmim]BF₄ was found to be an efficient and recyclable reaction medium for the one‐pot synthesis of pyrido[2,3‐d]pyrimidines. The structures of the products were characterized by IR, ¹H NMR, and HRMS spectra. This method had the advantages of easier work‐up, milder reaction conditions, high yields, and environmentally benign procedure.     

Effect of imidazolium salts on the catalytic reaction of 1,3-dioxolanes with methyl diazoacetate

Effect of imidazolium salts, [bmim]⁺Cl^?, [bmim]⁺BF₄ ^?, and [bmim]⁺PF₆ ^?, on the reaction of 1,3-dioxolanes with methyl diazoacetate in the presence of copper-containing catalysts was studied. The product composition was found to depend on the reaction conditions and the nature and ratio of components of the catalytic system.     

Polymerization of phenylacetylene catalysed by RhTp(cod) and RhBp(cod) in ionic liquids: effect of alcohols and of tetraammonium halides

RhTp(cod) ( 1 ) and RhBp(cod) ( 2 ), almost inactive in CH₂Cl₂, became good catalysts of phenylacetylene polymerization in ionic liquids ([bmim]Cl, [bmim]BF₄: bmim = 1‐butyl‐3‐methylimidazolium, [mokt]BF₄: mokt = 1‐methyl‐3‐oktylimidazolium, [bumepy]BF₄: 1‐butyl‐4‐methylpyridinium) and in CH₂Cl₂ in the presence of tetraammonium halides ([R₄N]X, R = Bu, Et; X = Cl, Br). The highest yields of polyphenylacetylene with catalyst 1 were obtained in [bmim]Cl at 65°C (64% after 2 h) and in [mokt]BF₄ at 20°C (56% after 24 h). In alcohols (CH₃OH, (CH₃)₂CHOH, (CH₃)₃COH) as solvents, up to 100% of the polymer was produced. When a mixture of an ionic liquid and CH₃OH was used as the reaction medium, the polymer yield was similar to the yield achieved in an ionic liquid only, but the molecular weight increased remarkably. Tetraammonium salts, [R₄N]X, are co‐catalysts for 1 , and the yield of the polymer increased in the order [Et₄N]Br < [Bu₄N]Br < [Et₄N]Cl < [Bu₄N]Cl. Polymers with molecular weights from 6900 to 38 800 Da were obtained with catalyst 2 in [R₄N]Br or [R₄N]Cl, whereas in ionic liquids ([bmim]Cl, [bmim]BF₄) the corresponding molecular weights were higher, from 51 300 to 60 300 Da. Copyright © 2004 John Wiley & Sons, Ltd.     

1-Butyl-3-methylimidazolium p-toluenesulfinate: a novel reagent for synthesis of sulfones and β-ketosulfones in ionic liquid

A novel task-specific ionic liquid, 1-butyl-3-methylimidazolium p-toluenesulfinate, [bmim][p-TolSO₂] has been synthesized and used as a nucleophile for the reaction with alkyl bromides and phenacyl bromides to prepare sulfones and β-ketosulfones in excellent yields (80-93%) in [bmim][BF₄] ionic liquid. The isolated yields of sulfones and β-ketosulfones were higher in [bmim][BF₄] than other organic solvents at room temperature.     

ZnO/MgO containing ZnO nanoparticles as a highly effective heterogeneous base catalyst for the synthesis of 4H-pyrans and coumarins in [bmim]BF4

4H-Pyrans and coumarins were synthesized through one-pot reactions using ZnO/MgO solid sample containing ZnO nanoparticles as an efficient reusable catalyst in ionic liquid, [bmim]BF₄. The catalyst is inexpensive and readily available, stable and storable, easily recycled and reused for several cycles with consistent activity. The procedure offers advantages in terms of high yields, short reaction times, and mild solvent-free reaction conditions.     

Synthesis of novel α-acyloxycarboxamides containing vinylbis(silanes) through three-component Passerini reactions

A three-component efficient procedure is described for the synthesis of novel α-acyloxycarboxamides containing bis(trimethylsilyl)ethenyl group from 4-[2,2-bis(trimethylsilyl)ethenyl]benzaldehyde, aromatic carboxylic acids and isocyanides, via the Passerini reaction. This reaction proceeds smoothly and cleanly under mild conditions in H₂O and [bmim]BF₄ at room temperature and led to products in good yields. The silylated aldehyde was obtained via Peterson olefination reaction of terephthalaldehyde with tris(trimethylsilyl)methyllithium in THF at 0 °C.     

Influence of ionic liquids on the phase transfer-catalysed enantioselective Michael reaction

The enantioselective Michael addition of dimethyl malonate to 1,3-diphenylprop-2-en-1-one promoted by a quaternary derived ammonium salt from quinine as a phase transfer catalyst in different ionic liquids, 1-butyl-3-methyl imidazolium hexafluorophosphate, [bmim]PF₆, 1-butyl-3-methyl pyridinium tetrafluoroborate, [bpy]BF₄, 1-butyl-3-methyl imidazolium tetrafluoroborate [bmim]BF₄ as well as in conventional organic solvents was studied.