Furan ring opening — isocoumarine ring closure: A recyclization reaction of 2‐carboxyaryldifurylmethanes

A general method for the synthesis of isocoumarine derivatives has been developed. Bis(5‐R‐2‐furyl)methylbenzoic acids (R = methyl, ethyl) underwent recyclization and subsequent cyclization into tetracyclic isochromene‐1‐one derivatives under treatment with hydrogen chloride in methanol. It has been shown that intermediate 4‐(5‐R‐furan‐2‐yl)‐3‐(3‐oxo‐3‐R‐propyl)‐isochromene‐1‐ones can be obtained selectively by varying a concentration of the hydrogen chloride and reaction times. In the case of R = tert‐butyl only corresponding 4‐[5‐(tert‐butyl)‐2‐furyl]‐3‐(4,4‐dimethyl‐3‐oxopentyl)‐1‐isochromenones were isolated regardless of the reaction conditions.     

Synthesis of New tert‐Butyl‐ and Bromo‐functionalized [1,2,4]Triazino [5,6‐b]indole‐3‐thiols and Indolo[2,3‐b]quinoxalines

In the present investigation, the synthesis of a series of structurally new and interesting tert‐butyl‐ and bromo‐functionalized [1,2,4]triazino[5,6‐b ]indoles ( 6a – f ) and indolo[2,3‐b ]quinoxalines ( 8a – f ) has been achieved, involving the condensation reaction of 7‐bromo‐5‐tert‐butylisatins ( 4a – f ) with thiosemicarbazide ( 5 ) and benzene‐1,2‐diamine ( 7 ). The substrates 4a – f were prepared through bromination reaction of 5‐tert‐butylisatin ( 3 ) with NBS in PEG‐400 followed by alkylation reaction. The molecular structures of these newly synthesized compounds were elucidated on the basis of their elemental analyses and spectral data.     

New Aspects of 1,3‐Diphosphacyclobutane‐2,4‐diyls

1,3‐Di(tert‐butyl)‐2,4‐bis[2,4,6‐tri(tert‐butyl)phenyl]‐1,3‐diphosphacyclobutane‐2,4‐diyl was formed from [2,4,6‐tri(tert‐butyl)phenyl]phosphaacetylene and t‐BuLi. In addition, the X‐ray diffraction analysis was carried out, together with theoretical calculations of the structure and NMR data.     

Formylation of 4,7‐Dihydro‐1,2,4‐triazolo[1,5‐a]pyrimidines Using Vilsmeier–Haack Conditions

Formylation of 5‐methyl‐7‐phenyl‐4,7‐dihydro‐1,2,4‐triazolo[1,5‐a]pyrimidine 1a using Vilsmeier–Haack conditions yields 5‐methyl‐7‐phenyl‐4,7‐dihydro‐1,2,4‐triazolo[1,5‐a]pyrimidin‐6‐ylcarbaldehyde 3a . 5,7‐Diaryl‐4,7‐dihydro‐1,2,4‐triazolo[1,5‐a]pyrimidines 1b , 1c in this reaction apart from formylation undergo recyclization into 5‐aryl‐1,2,4‐triazolo[1,5‐a]pyrimidin‐6‐ylmethane derivatives 4b , 4c , 5b , 5c , and 6 . The structure of the synthesized compounds was determined on the basis of NMR, IR, and MS spectroscopic data and confirmed by the X‐ray analysis of the 6‐(ethoxy‐phenyl‐methyl)‐5‐phenyl‐[1,2,4]triazolo[1,5‐a]pyrimidine 6 , 5‐phenyl‐6‐(1‐phenyl‐vinyl)‐[1,2,4]triazolo[1,5‐a]pyrimidine 11 , and 7‐phenyl‐6‐(1‐phenyl‐vinyl)‐[1,2,4]triazolo[4,3‐a]pyrimidine 12 .     

Synthesis of a New Imidazo[4′,5′:3,4]pyrazolo[5,1‐c][1,2,4]triazine‐4,8‐dione Heterocyclic System

A novel imidazo[4′,5′:3,4]pyrazolo[5,1‐c][1,2,4]triazine‐4,8‐dione heterocyclic system was synthesized starting from available 4‐amino‐6‐tert‐butyl‐3‐methylthio‐1,2,4‐triazin‐5(4H)‐one in four steps with 28% overall yield.     

Synthesis of p‐tert‐Butyl‐calix[6] ‐biscrown‐3 via Intramolecular Ring‐closure of 1,4‐Bis (2‐(2‐chloroethoxy) ethoxy) ‐p‐tert‐butyl‐calix[6]arene

With a variation in reaction conditions, 1, 4‐bis (2‐(2‐chloroethoxy)ethoxy)‐calix[6]arene (3) and l,3,5‐tris(2‐(2‐chloroethoxy) ethoxy)‐calix [6] arene (4) or 4 and 4‐chloroethoxyethoxy‐calix[6]crown‐3 (5) were selectively synthesized from p‐tert‐butyl‐calix [6] arene and 2‐(2‐chloroethoxy)ethyltosylate. l,3–4,6‐p‐tert‐butylcalix[6]‐bis‐crown‐3 (6) with (u,u,u,d,d,d) conformation and 1,3–4,5‐p‐tert‐butylcalix[6]‐biscrown‐3 (7) with self‐anchored (u,u, u, u, u, d) conformation were synthesized through an intramolecularly ring‐closing condensation of 1, 4‐bis (2‐(2‐chloroethoxy)ethoxy)‐p‐tert‐butyl‐calix[6]arene (3) in 25% and 15% yield, respectively. Using 5 instead of 3, only 7 was obtained in 65% high yield. 6 and 7 show different complexation properties toward alkali metal and ammonium ions.     

Synthesis of nitrogen‐containing heterocycles 9. Preparation and carbon‐carbon bond cleavage of spiro[cycloalkane[1′,2′,4′]‐triazolo[1′,5′‐a][1′,3′,5′]triazine] derivatives and related compounds

Diaminomethylenehydrazones of cyclic ketones 1–5 reacted with ethyl N‐cyanoimidate (I) at room temperature or with bis(methylthio)methylenecyanamide (II) under brief heating to give directly the corresponding spiro[cycloalkane[1′,2′,4′]triazolo[1′,5′,‐a][1′,3′‐5′]triazine] derivatives 7–12 in moderate to high yields. Ring‐opening reaction of the spiro[cycloalkanetriazolotriazine] derivatives occurred at the cycloalkane moiety upon heating in solution to give 2‐alkyl‐5‐amino[1,2,4]triazolotriazines 13–16. Diaminomethylenehydrazones 17–19, of hindered acyclic ketones, gave 2‐methyl‐7‐methylthio[1,2,4]‐triazolo[1,5‐a][1,3,5]triazines 21–23 by the reaction with II as the main products with apparent loss of 2‐methylpropane from the potential precursor, 2‐tert‐butyl‐2‐methyl‐7‐methylthio[1,2,4]triazolo[1,5‐a]‐[1,3,5]triazines 20, in good yields. In general, bis(methylthio)methylenecyanamide II was found to be a favorable reagent to the one‐step synthesis of the spiro[cycloalkanetriazolotriazine] derivatives from the diaminomethylenehydrazones. The spectral data and structural assignments of the fused triazine products are discussed.     

Eight 7‐benzyl‐3‐tert‐butyl‐1‐phenylpyrazolo[3,4‐d]oxazines,encompassing structures containing no intermolecular hydrogen bonds,and hydrogen‐bonded structures in one,two or three dimensions

7‐Benzyl‐3‐tert‐butyl‐1‐phenyl‐6,7‐dihydro‐1H,4H‐pyrazolo[3,4‐d][1,3]oxazine, C₂₂H₂₅N₃O, (I), and 3‐tert‐butyl‐7‐(4‐methylbenzyl)‐1‐phenyl‐6,7‐dihydro‐1H,4H‐pyrazolo[3,4‐d][1,3]oxazine, C₂₃H₂₇N₃O, (II), are isomorphous in the space group P2₁, and molecules are linked into chains by C—H...O hydrogen bonds. In each of 3‐tert‐butyl‐7‐(4‐methoxybenzyl)‐1‐phenyl‐6,7‐dihydro‐1H,4H‐pyrazolo[3,4‐d][1,3]oxazine, C₂₃H₂₇N₃O₂, (III), which has cell dimensions rather similar to those of (I) and (II), also in P2₁, and 3‐tert‐butyl‐1‐phenyl‐7‐[4‐(trifluoromethyl)benzyl]‐6,7‐dihydro‐1H,4H‐pyrazolo[3,4‐d][1,3]oxazine, C₂₃H₂₄F₃N₃O, (IV), there are no direction‐specific interactions between the molecules. In 3‐tert‐butyl‐7‐(4‐nitrobenzyl)‐1‐phenyl‐6,7‐dihydro‐1H,4H‐pyrazolo[3,4‐d][1,3]oxazine, C₂₂H₂₄N₄O₃, (V), a combination of C—H...O and C—H...N hydrogen bonds links the molecules into complex sheets. There are no direction‐specific interactions between the molecules of 3‐tert‐butyl‐7‐(2,3‐dimethoxybenzyl)‐1‐phenyl‐6,7‐dihydro‐1H,4H‐pyrazolo[3,4‐d][1,3]oxazine, C₂₄H₂₉N₃O₃, (VI), but a three‐dimensional framework is formed in 3‐tert‐butyl‐7‐(3,4‐methylenedioxybenzyl)‐1‐phenyl‐6,7‐dihydro‐1H,4H‐pyrazolo[3,4‐d][1,3]oxazine, C₂₃H₂₅N₃O₃, (VII), by a combination of C—H...O, C—H...N and C—H...π(arene) hydrogen bonds, while a combination of C—H...O and C—H...π(arene) hydrogen bonds links the molecules of 3‐tert‐butyl‐1‐phenyl‐7‐(3,4,5‐trimethoxybenzyl)‐6,7‐dihydro‐1H,4H‐pyrazolo[3,4‐d][1,3]oxazine, C₂₅H₃₁N₃O₄, (VIII), into complex sheets. In each compound, the oxazine ring adopts a half‐chair conformation, while the orientations of the pendent phenyl and tert‐butyl substituents relative to the pyrazolo[3,4‐d]oxazine unit are all very similar.     

A Novel,One‐Pot Four‐Component Route to 2′‐Thioxo‐2′,3′‐dihydrospiro[indole‐3,6′‐[1,3]thiazin]‐2‐one Derivatives

An efficient route to 2′,3′‐dihydro‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives is described. It involves the reaction of isatine, 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one, and different amines in the presence of CS₂ in dry MeOH at reflux (Scheme 1). The alkyl carbamodithioate, which results from the addition of the amine to CS₂, is added to the α,β‐unsaturated ketone, resulting from the reaction between 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one and isatine, to produce the 3′‐alkyl‐2′,3′‐dihydro‐4′‐phenyl‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives in excellent yields (Scheme 2). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.     

Unexpected Formation of 5‐Nitro‐1H‐benzimidazoles by Nucleophilic Recyclization of 1‐Methyl‐5‐nitropyridinium Salts

The synthesis of substituted 5‐nitro‐2‐phenyl‐1H‐benzimidazoles has been described via domino anionic process rearrangement of 3‐benzoylamino‐1,2‐dimethyl‐5‐nitropyridinium salts in the presence of NaOH water–alcohol solution. Substituted N‐benzoyl‐o‐phenylenediamines was obtained via recyclization of 3‐benzoylamino‐1,2‐dimethyl‐5‐nitropyridinium salts in the presence of aqueous methylamine solution.     

Four N7‐alkoxybenzyl‐substituted 4,5,6,7‐tetrahydro‐1H‐pyrazolo[3,4‐b]pyridine‐5‐spiro‐1′‐cyclohexane‐2′,6′‐diones: hydrogen‐bonded supramolecular structures in zero,one, two or three dimensions

3‐tert‐Butyl‐7‐(4‐methoxybenzyl)‐4′,4′‐dimethyl‐1‐phenyl‐4,5,6,7‐tetrahydro‐1H‐pyrazolo[3,4‐b]pyridine‐5‐spiro‐1′‐cyclohexane‐2′,6′‐dione, C₃₁H₃₇N₃O₃, (I), 3‐tert‐butyl‐7‐(2,3‐dimethoxybenzyl)‐4′,4′‐dimethyl‐1‐phenyl‐4,5,6,7‐tetrahydro‐1H‐pyrazolo[3,4‐b]pyridine‐5‐spiro‐1′‐cyclohexane‐2′,6′‐dione, C₃₂H₃₉N₃O₄, (II), 3‐tert‐butyl‐4′,4′‐dimethyl‐7‐(3,4‐methylenedioxybenzyl)‐1‐phenyl‐4,5,6,7‐tetrahydro‐1H‐pyrazolo[3,4‐b]pyridine‐5‐spiro‐1′‐cyclohexane‐2′,6′‐dione, C₃₁H₃₅N₃O₄, (III), and 3‐tert‐butyl‐4′,4′‐dimethyl‐1‐phenyl‐7‐(3,4,5‐trimethoxybenzyl)‐4,5,6,7‐tetrahydro‐1H‐pyrazolo[3,4‐b]pyridine‐5‐spiro‐1′‐cyclohexane‐2′,6′‐dione ethanol 0.67‐solvate, C₃₃H₄₁N₃O₅·0.67C₂H₆O, (IV), all contain reduced pyridine rings having half‐chair conformations. The molecules of (I) and (II) are linked into centrosymmetric dimers and simple chains, respectively, by C—H...O hydrogen bonds, augmented only in (I) by a C—H...π hydrogen bond. The molecules of (III) are linked by a combination of C—H...O and C—H...π hydrogen bonds into a chain of edge‐fused centrosymmetric rings, further linked by weak hydrogen bonds into supramolecular arrays in two or three dimensions. The heterocyclic molecules in (IV) are linked by two independent C—H...O hydrogen bonds into sheets, from which the partial‐occupancy ethanol molecules are pendent. The significance of this study lies in its finding of a very wide range of supramolecular aggregation modes dependent on rather modest changes in the peripheral substituents remote from the main hydrogen‐bond acceptor sites.     

New Synthetic Approach to Naphtho[1,2‐b]furan and 4′‐Oxo‐Substituted Spiro[cyclopropane‐1,1′(4′H)‐naphthalene] Derivatives

A one‐step synthesis of ethyl 2,3‐dihydronaphtho[1,2‐b]furan‐2‐carboxylate and/or ethyl 4′‐oxospiro[cyclopropane‐1,1′(4′H)‐naphthalene]‐2′‐carboxylate derivatives 2 and 3 , respectively, from substituted naphthalen‐1‐ols and ethyl 2,3‐dibromopropanoate is described (Scheme 1). Compounds 2 were easily aromatized (Scheme 2). In the same way, 3,4‐dibromobutan‐2‐one afforded the corresponding 1‐(2,3‐dihydronaphtho[1,2‐b]furan‐2‐yl)ethanone and/or spiro derivatives 8 and 9 , respectively (Scheme 6). A mechanism for the formation of the dihydronaphtho[1,2‐b]furan ring and of the spiro compounds 3 is proposed (Schemes 3 and 4). The structures of spiro compounds 3a and 3f were established by X‐ray structural analysis. The reactivity of compound 3a was also briefly examined (Scheme 9).     

Three structures of dispirooxindole derivatives generated in situ through a three‐component one‐pot strategy with complete regio‐ and stereoselectivity

The challenging molecular architecture of spirooxindoles is appealing to chemists because it evokes novel synthetic strategies that address configurational demands and provides platforms for further reaction development. The [3+2] cycloaddition of the carbonyl ylide with arylideneoxindole via a five‐membered cyclic transition state gave a novel class of dispirooxindole derivatives, namely tert‐butyl 4′‐(4‐bromophenyl)‐1′′‐methyl‐2,2′′‐dioxo‐5′‐phenyl‐4′,5′‐dihydrodispiro[indoline‐3,2′‐furan‐3′,3′′‐indoline]‐1‐carboxylate, C₃₆H₃₁BrN₂O, (Ia), 5′‐(4‐bromophenyl)‐1,1′′‐dimethyl‐4′‐phenyl‐4′,5′‐dihydrodispiro[indoline‐3,2′‐furan‐3′,3′′‐indoline]‐2,2′′‐dione, C₃₂H₂₅BrN₂O₃, (Ib), and tert‐butyl 1′′‐methyl‐2,2′′‐dioxo‐4′‐phenyl‐5′‐(p‐tolyl)‐4′,5′‐dihydrodispiro[indoline‐3,2′‐furan‐3′,3′′‐indoline]‐1‐carboxylate, C₃₇H₃₄N₂O₅, (Ic). Crystal structure analyses of these dispirooxindoles revealed the formation of two diastereoisomers selectively and confirmed their relative stereochemistry (SSSR and RRRS). In all three structures, intramolecular C—H...O and π–π interactions between oxindole and dihydrofuran rings are the key factors governing the regio‐ and stereoselectivity, and in the absence of conventional hydrogen bonds, their crystal packings are strengthened by intermolecular C—H...π interactions.     

Two 5‐oxa‐2,6‐diazaspiro[3.4]octan‐1‐one derivatives from the [3+2] cyclo­addition of methylenelactams with nitrones

The two title 5‐oxa‐2,6‐di­aza­spiro­[3.4]­octan‐1‐one adducts, 7‐benzoyl‐2‐(4‐methoxy­phenyl)‐6‐phenyl‐5‐oxa‐2,6‐di­aza­spiro­[3.4]­octan‐1‐one, C₂₅H₂₂N₂O₄, (III), and 6‐tert‐butyl‐2‐(4‐methyl­phenyl)‐7‐phenyl‐5‐oxa‐2,6‐di­aza­spiro­[3.4]­octan‐1‐one, C₂₂H₂₆N₂O₂, (IV), were obtained from a stereospecific [3+2] 1,3‐cyclo­addition of 3‐methyl­ene azetidin‐2‐ones as dipolaro­philes with nitro­nes. The lactam ring is conjugated with the p‐­methoxy­phenyl or p‐methyl­phenyl moiety. The envelope conformations of the isoxazolidine rings in (III) and (IV) are different, leading the substituents to be pseudo‐axial in (III) and pseudo‐equatorial in (IV).     

SO2‐Extrusion of an 8‐thiabicylo[3.2.1]octa‐2,6‐diene 8,8‐dioxide and rearrangement of the resulting cycloheptatriene

The reaction of 3,4‐di‐tert‐butyl‐thio‐phene 1‐oxide ( 8 ) with tetrachlorocyclopropene provided 6,7‐di‐tert‐butyl‐2,3,4,4‐tetrachloro‐8‐thia‐bicylo[3.2.1]octa‐2,6‐diene 8‐oxide ( 10 ), which was oxidized to the corresponding 8,8‐dioxide 16 by m‐chloroperbenzoic acid. The thermolysis of 16 in refluxing chlorobenzene, xylene, or octane gave 5‐tert‐ butyl‐1,2‐dichloro‐3‐[(1,1‐dich‐loro‐2,2‐dimethyl)‐pro‐ pyl]‐benzene ( 18 ) with extrusion of SO₂ and 2‐tert‐butyl‐4,5,6‐trichloro‐9,9‐dimethylbicyclo[5.2.0]nona‐1,3,5‐triene ( 19 ) with extrusion of SO₂ and HCl in 73–78% combined yields. On the other hand, the thermolysis of 16 in the presence of triethylamine gave 19 as the sole product in 98% yield. A mechanism that involves the initial formation of 4,5‐di‐tert‐butyl‐1,2,7,7‐tetrachlorocycloheptatriene ( 17 ) is proposed to ex‐ plain the observed products. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:132–222, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20079     

One‐step ring‐closure procedure for 4,5‐dihydro‐1,3‐thiazino[5,4‐b]indole derivatives with Lawesson's reagent. The fifth dihydro‐1,3‐thiazino[b]indole isomer

We report a convenient approach for the synthesis of a new ring system: 4,5‐dihydro‐1,3‐thiazino[5,4‐b]indoles. The procedure involves the use of Lawesson's reagent in the presence of silica to achieve the one‐step ring‐closure reactions of 2‐benzoylamino‐3‐hydroxymethylindole intermediates to furnish 4,5‐dihydro‐2‐aryl‐1,3‐thiazino[5,4‐b]indoles. 2‐Phenylimino‐1,3‐thiazino[5,4‐b]indoles were obtained via the corresponding 3‐phenylthiourea‐2‐carboxylic acid ester derivatives by chemoselective reduction of the ester group, followed by ring closure under acidic conditions. The structures of the novel products were elucidated by IR, ¹H‐NMR, and ¹³C‐NMR spectroscopy, including 2D‐HMQC, 2D‐HMBC, and DEPT measurements. J. Heterocyclic Chem., (2011).     

Furan ring opening ‐ indole ring closure: Synthesis of furo[2′,3′:3,4]‐cyclohepta[1,2‐b]indolium chlorides

A new synthetic approach to furo[2′,3′:3,4]cyclohepta[1,2‐b]indolium chlorides is elaborated starting from 2‐acetylaminoaryldifurylmethanes or 2‐aminoaryldifurylmethanes under treatment with methanolic HCl solution. The reaction proceeds in three steps: recyclization, intramolecular cyclization, and disproportionation. In this case the furan ring takes part in building up both pyrrole and seven‐membered rings. The same salts can be obtained directly from 2‐acetylaminobenzaldehydes and 2‐methylfuran under similar conditions without isolation of corresponding 2‐acetylaminoaryldifurylmethanes.     

Synthesis of pyrazole‐fused azepino[5,4,3‐cd]indoles

The synthesis of some new pyrazolo[3′,4′:6,7]azepino[5,4,3‐cd] indoles (10a‐c) was achieved via regios‐elective cyclization of the respective 3‐(4‐acylaminopyrazol‐5‐yl)indoles (9a‐c) under Bischler‐Napieralski reaction conditions. The latter compounds were obtained by acylation of the corresponding 3‐(4‐aminopyra‐zol‐5‐yl)indoles (8a,b) which, in turn, were prepared by reduction of the 3‐(4‐nitropyrazol‐5‐yl)indoles precursors (7a,b) . The latter synthons were accessible from the reaction of indolylzinc chlorides (5a,b) with 5‐chloro‐1,3‐dimethyl‐4‐nitropyrazole. Ms and nmr spectral data of 10a‐c are in agreement with the assigned azepino‐indole structure as determined for 10a by X‐ray crystal measurements which demonstrate that the azepine ring is almost completely planar with the indole and pyrazole rings.     

Synthesis and complexing properties of double armed diaza‐15‐crown‐5 and diaza‐18‐crown‐6 ethers having 4′‐hydroxy‐3′,5′‐disubstituted benzyl groups

A series of double armed diaza‐15‐crown‐5 ethers (9a ‐ 16a) and diaza‐18‐crown‐6 ethers (9b ‐ 16b) have been prepared by the Mannich reaction of 2,6‐disubstituted phenols with the corresponding N,N'‐dimethoxymethyldiaza‐crown ethers in benzene. The crystal structures of the diaza‐18‐crown‐6 ethers having iso‐propyl (10b) , tert‐butyl (11b) , and mixed methyl and tert‐butyl groups (12b) at positions 3′ and 5′ of the phenolic side arms were determined using X‐ray diffraction methods. Competitive transport by these ligands for sodium, potassium and cesium cations were measured under basic‐source phase and acidic‐receiving phase conditions.     

Utilization of cleavage of the [1]benzofuro[2,3‐e][1,2,4]triazine ring for the synthesis of oxygen,nitrogen and sulfur derivatives of [1,2,4]triazine

A series of 6‐azacytosines 4a‐4k and 5a‐5c were prepared by nucleophilic cleavage of furan ring of [1]benzofuro[2,3‐e][1,2,4]triazine derivative 1 . Some of them were used for the preparation of derivatives of [1,2,4]triazolo[4,3‐d][1,2,4]triazine ( 6a‐6d ) and tetrazolo[1,5‐d][1,2,4]triazine (7). The reaction of 1 with hydrogen sulfide afforded the corresponding 6‐(2‐hydroxyphenyl)‐2‐phenyl‐5‐thioxo‐4,5‐dihydro‐1,2,4‐tri‐azin‐3(2H)‐one ( 8 ), while with hydrogen selenide 6‐(2‐hydroxyphenyl)‐2‐phenyl‐4,5‐dihydro‐1,2,4‐triazin‐3(2H)‐one ( 9 ) was formed. The prepared compounds were tested for biological activity.