Hydrogen bonding and π–π interactions in the cocrystal salt [Fe(bpe)2(H2O)4](TCEP)2·2(bpe) [bpe is trans‐1,2‐bis(pyridin‐4‐yl)ethene and TCEP is 1,1,3,3‐tetracyano‐2‐ethoxypropenide]

The cocrystal salt tetraaquabis[trans‐1,2‐bis(pyridin‐4‐yl)ethene‐κN]iron(II) bis(1,1,3,3‐tetracyano‐2‐ethoxypropenide)–trans‐1,2‐bis(pyridin‐4‐yl)ethene (1/2), [Fe(C₁₂H₁₀N₂)₂(H₂O)₄](C₉H₅N₄O)₂·2C₁₂H₁₀N₂, is a rare example of a mononuclear Fe^II compound with trans‐1,2‐bis(pyridin‐4‐yl)ethane (bpe) ligands. The complex cation resides on a crystallographically imposed inversion center and exhibits a tetragonally distorted octahedral coordination geometry. Both the symmetry‐independent bpe ligand and the cocrystallized bpe molecule are essentially planar. The 1,1,3,3‐tetracyano‐2‐ethoxypropenide counter‐ion is nonplanar and the bond lengths are consistant with significant electron delocalization. The extended structure exhibits an extensive O—H…N hydrogen‐bonding network with layers of complex cations joined by the cocrystallized bpe. Both the coordinated and the cocrystallized bpe are involved in π–π interactions. Hirshfeld and fingerprint plots reveal the important intermolecular interactions. Density functional theory was used to estimate the strengths of the hydrogen‐bonding and π–π interactions, and suggest that the O—H…N hydrogen bonds enhance the strength of the π‐interactions by increasing the polarization of the pyridine rings.     

Synthesis,structure and biological activity of diorganotin derivatives with pyridyl functionalized bis(pyrazol‐1‐yl)methanes

Three pyridyl functionalized bis(pyrazol‐1‐yl)methanes, namely 2‐[(4‐pyridyl)methoxyphenyl] bis(pyrazol‐1‐yl)methane (L¹), 2‐[(4‐pyridyl)methoxyphenyl]bis(3,5‐dimethylpyrazol‐1‐yl)methane (L²) and 2‐[(3‐pyridyl)methoxyphenyl]bis(pyrazol‐1‐yl)methane (L³) have been synthesized by the reactions of (2‐hydroxyphenyl)bis(pyrazol‐1‐yl)methanes with chloromethylpyridine. Treatment of these three ligands with R₂SnCl₂ (R = Et, n‐Bu or Ph) yields a series of symmetric 2:1 adducts of (L)₂SnR₂Cl₂ (L = L¹, L² or L³), which have been confirmed by elemental analysis and NMR spectroscopy. The crystal structures of (L²)₂Sn(n‐Bu)₂Cl₂·0.5C₆H₁₄ and (L³)₂SnEt₂Cl₂ determined by X‐ray crystallography show that the functionalized bis(pyrazol‐1‐yl)methane acts as a monodentate ligand through the pyridyl nitrogen atom, and the pyrazolyl nitrogen atoms do not coordinate to the tin atom. The cytotoxic activity of these complexes for Hela cells in vitro was tested. Copyright © 2010 John Wiley & Sons, Ltd.     

1,2‐Bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile and Vinyl Ethers: Cyclic Ketene Imines on the Pathway to 1 : 2 Cycloadducts

(E)‐ and (Z)‐1,2‐bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile (BTE; (=E)‐ and (Z)‐1,2‐bis(trifluoromethyl)but‐2‐enedinitrile) were reacted with an excess of methyl vinyl ether, used as solvent, and furnished 1 : 2 adducts 6 (54%) and cyclobutanes 3 as 1 : 1 adducts (41%). The four diastereoisomeric bis‐adducts 6 (different ratios from (E)‐ and (Z)‐BTE) are derivatives of 1‐azabicyclo[4.2.0]oct‐5‐ene; X‐ray analyses and ¹⁹F‐NMR spectra revealed their structures. Since the cyclobutanes 3 are resistant to vinyl ether, the pathways leading to mono‐ and bis‐adducts must compete on the level of the intermediate l,4‐zwitterions 1 and 2 . The latter either cyclize to the cyclobutanes 3 or to six‐membered cyclic ketene imines 8 which accept a second molecule of vinyl ether to yield the bis‐adducts 6 . The occurrence of the highly strained ketene imines 8 gains credibility by comparison to stable seven‐membered cyclic ketene imines recently reported.     

A convenient route to pyridones,pyrazolo[2,3‐a]pyrimidines and pyrazolo[5,1‐c]triazines incorporating antipyrine moiety

Condensation of 4‐aminoantipyrine with ethyl acetoacetate, ethyl benzoylacetate, and ethyl cyanoacetate furnished the corresponding ethyl 3‐(1,2‐dihydro‐1,5‐dimethyl‐2‐phenyl‐3‐oxo‐3H‐pyrazol‐4‐yl)aminoacrylate and 2‐cyano‐N‐[(1,2‐dihydro‐1,5‐dimethyl‐2‐phenyl‐3‐oxo‐3H‐pyrazol‐4‐yl)]acetamide derivatives. The aminoacrylates derivatives react with acetonitrile and sodium hydride to give 2‐amino‐6‐methyl‐1‐(1,2‐dihydro‐1,5‐dimethyl‐2‐phenyl‐3‐oxo‐3H‐pyrazol‐4‐yl)‐4‐pyridone. Reaction of the cyanoacetamide derivative with dimethylformamide‐dimethylacetal (DMF‐DMA) afforded 2‐cyano‐N‐[1,2‐dihydro‐1,5‐dimethyl‐2‐phenyl‐3‐oxo‐pyrazol‐4‐yl]‐2‐(N,N‐dimethylamino)methylene acetamide in high yield. Treatment of the latter with 5‐aminopyrazole derivatives afforded the corresponding pyrazolo[2,3‐a]pyrimidines. 2‐cyano‐N‐[(1,2‐dihydro‐1,5‐dimethyl‐2‐phenyl‐3‐oxo‐3H‐pyrazol‐4‐yl)]acetamide also reacts with heterocyclic diazonium salts to give the corresponding pyrazolo[5,1‐c]‐1,2,4‐triazine derivatives. © 2004 Wiley Periodicals, Inc. Heteroatom Chem 15:508–514, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.20046     

[Hg2(μ‐bpe)(μ‐OAc)2(μ‐SCN)2]n,a New Two‐Dimensional Coordination Polymer Involving Three Simultaneously Bridging Ligands: 1,2‐Bis(4‐pyridyle)ethene,Acetate, and Thiocyanate

A new mercury(II) complex of 1,2‐bis(4‐pyridyle)ethene (bpe) with anionic acetate and thiocyanate ligands has been synthesized and characterized by elemental analysis, IR, ¹H NMR and ¹³C NMR spectroscopy. The single crystal X‐ray analysis shows that the complex is a two‐dimensional polymer with simultaneously bridging 1,2‐bis(4‐pyridyle)ethane, acetate and thiocyanate ligands and basic repeating dimeric [Hg₂(μ‐bpe)(μ‐OAc)₂(μ‐SCN)₂] units. The two‐dimensional system forms a three‐dimensional network by packing via π‐π stacking interactions.     

Synthesis of 4‐(1‐phenyl‐1H‐pyrazol‐3‐yl)‐[1,2,4]triazolo[4,3‐a]quinoxalines and their 4‐halogenopyrazolyl analogs

Synthesis of {3‐[1‐(ethoxycarbonyl)‐[1,2,4]triazolo[4,3‐a]quinoxalin‐4‐yl]‐1‐phenyl‐1H‐pyrazol‐5‐yl}methyl ethyl oxalate ( 2 ), ethyl 4‐[5‐(acetoxymethyl)‐1‐phenyl‐1H‐pyrazol‐3‐yl]‐[1,2,4]triazolo[4,3‐a]quioxaline‐1‐carboxylate ( 4 ), [4‐halo‐1‐phenyl‐3‐(1‐phenyl‐[1,2,4]triazolo[4,3‐a]quioxalin‐4‐yl)‐1H‐pyrazol‐5‐yl]methyl acetate ( 11 ), {4‐halo‐3‐[1‐methyl‐[1,2,4]triazolo[4,3‐a]quinoxalin‐4‐yl]‐1‐phenyl‐1H‐pyraz‐ol‐5‐yl}methyl acetate ( 13 ), and [3‐([1,2,4]triazolo‐[4,3‐a]quinoxalin‐4‐yl)‐4‐halo‐1‐phenyl‐1H‐pyrazol‐5‐yl] methyl formate ( 15 ) was accomplished. The structural investigation of the new compounds is based on chemical and spectroscopic evidences. J. Heterocyclic Chem., (2011)     

New succinyl‐spaced pyrazoles: Regioselective synthesis of 1,4‐bis[5‐(trichloromethyl)‐1H‐pyrazol‐1‐yl]butane‐1,4‐diones

The facile and convenient access by a conventional procedure in ethanol as solvent to a new series of succinyl‐spaced pyrazoles including 1,4‐bis[5‐(trichloromethyl)‐5‐hydroxy‐4,5‐dihydro‐1H‐pyrazol‐1‐yl]butane‐1,4‐diones (64–82%) and the respective dehydrated derivatives as 1,4‐bis[5‐(trichloromethyl)‐1H‐pyrazol‐1‐yl]butane‐1,4‐diones in 57–82% yields, from the regioselective cyclocondensation reactions of 4‐substituted 4‐methoxy‐1,1,1‐trichloroalk‐3‐en‐2‐ones with succinic acid dihydrazide, where the 4‐substituents are Me, Ph, 4‐FC₆H₄, 4‐ClC₆H₄, 4‐NO₂C₆H₄, 2‐furyl, and 2‐thienyl, is reported. J. Heterocyclic Chem., 2011.     

In situ synthesis of mononuclear copper(II) complexes of the new tridentate ligand bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methyl]amine

Two mononuclear copper complexes, {bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl‐κN²)methyl]amine‐κN}(3,5‐dimethyl‐1H‐pyrazole‐κN²)(perchlorato‐κO)copper(II) perchlorate, [Cu(ClO₄)(C₅H₈N₂)(C₁₂H₁₉N₅)]ClO₄, (I), and {bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl‐κN²)methyl]amine‐κN}bis(3,5‐dimethyl‐1H‐pyrazole‐κN²)copper(II) bis(hexafluoridophosphate), [Cu(C₅H₈N₂)₂(C₁₂H₁₉N₅)](PF₆)₂, (II), have been synthesized by the reactions of different copper salts with the tripodal ligand tris[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methyl]amine (TDPA) in acetone–water solutions at room temperature. Single‐crystal X‐ray diffraction analysis revealed that they contain the new tridentate ligand bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methyl]amine (BDPA), which cannot be obtained by normal organic reactions and has thus been captured in the solid state by in situ synthesis. The coordination of the Cu^II ion is distorted square pyramidal in (I) and distorted trigonal bipyramidal in (II). The new in situ generated tridentate BDPA ligand can act as a meridional or facial ligand during the process of coordination. The crystal structures of these two compounds are stabilized by classical hydrogen bonding as well as intricate nonclassical hydrogen‐bond interactions.     

New Synthesis of N‐(1H‐pyrazol‐5‐yl)‐hexahydroquinoline‐3‐carbonitrile and octahydropyrazolo[4′,3′:5,6]pyrimido[1,2‐a]quinoline‐6‐carbonitrile Derivatives from the Cyclic β‐Enaminones

A facile and convenient synthesis of an interesting N‐(1H‐pyrazol‐5‐yl)‐hexahydroquinoline‐3‐carbonitrile and octahydropyrazolo[4′,3′:5,6]pyrimido[1,2‐a ]quinoline‐6‐carbonitrile derivatives via the versatile readily accessible cyclic enaminones incorporating pyrazole moiety was accomplished.     

New Bis‐o‐Benzoquinoid Ligands with Ethylene Bridge and Their Metal Complexes

The treatment of di‐o‐quinone 4,4′‐(ethane‐1,2‐diyl)‐bis(3,6‐di‐tert‐butyl‐o‐benzoquinone) (Q–CH₂–CH₂–Q, 1 ) leads to its rearrangement to form di‐p‐quinomethide 4,4′‐(ethane‐1,2‐diylidene)bis(2‐hydroxy‐3,6‐di‐tert‐butyl‐cyclohexa‐2,5‐dienone) ( 2 ). The subsequent oxidation of 2 by an alkaline solution of K₃[Fe(CN)₆] yielded the new di‐o‐quinone 4,4′‐(ethene‐1,2‐diyl)bis(3,6‐di‐tert‐butyl‐o‐benzoquinone) (Q–CH=CH–Q, 3 ), which contains an ethylene bridge. The formation of mono‐ and poly‐reduced derivatives of 2 and 3 with potassium, thallium was studied by EPR technique. The dinuclear thallium derivative of 3 , Tl(SQ–CH=CH–SQ)Tl, was found to exist in the diamagnetic quinomethide form. The most stable derivatives of 2 and 3 are triphenyltin(IV) bis‐p‐quinomethide‐phenolate ( 4 ) and triphenylantimony(V) bis‐catecholate ( 5 ), which have been synthesized and isolated. The molecular structures of 2 , 3 , and 5 were characterized by single‐crystal X‐ray diffraction.     

Preparation of phosphinated bisphenol from acid‐fragmentation of 1,1,1‐tris(4‐hydroxyphenyl)ethane and its application in high‐performance cyanate esters

We reveal a route for the preparation of phosphinated bisphenol, 1,1‐bis(4‐hydroxyphenyl)‐1‐(6‐oxido‐6H‐dibenz <c,e> <1,2> oxaphosphorin‐6‐yl)ethane (2) , via a one‐pot reaction of 1,1,1‐tris(4‐hydroxyphenyl)ethane and 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene 10‐oxide (DOPO) in the catalysis of p‐toluenesulfonic acid. A two‐step reaction mechanism, acid‐fragmentation of 1,1,1‐tris(4‐hydroxyphenyl)ethane followed by nucleophilic addition of DOPO, is proposed for the synthesis. Based on (2) , a dicyanate ester derivative, 1,1‐bis(4‐cyanatophenyl)‐1‐(6‐oxido‐6H‐dibenz <c,e> <1,2> oxaphosphorin‐6‐yl)ethane (3) was prepared and co‐cured with a commercially available dicyanate ester, the dicyanate ester of bisphenol A (BACY). Experimental data show that incorporating (3) into BACY enhances the flame retardancy and dielectric properties with little penalty to the thermal properties. A thermoset with T_g 274 °C, coefficient of thermal expansion (CTE) 49 ppm/°C, D_k 3.04 (1 GHz), T_d (5%,) N₂: 435 °C, air: 424 °C, and UL‐94 V‐0 rating can be achieved via this approach. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Synthesis of diallyl‐containing polyimide and the effect of allyl groups on properties

A diallyl‐containing bisphenol, 1,1‐bis(3‐allyl‐4‐hydroxyphenyl)‐1‐(6‐oxido‐6H ‐dibenzo [c,e][1,2] oxaphosphorin‐6‐yl) ethane ( 1 ), was prepared by a two‐step procedure. Then, a diallyl‐containing diamine, 1,1‐bis(3‐allyl‐4‐(4‐aminophenoxy)‐phenyl)‐1‐(6‐oxido‐6H‐dibenzo [c,e][1,2] oxaphosphorin‐6‐yl)ethane ( 3 ), was prepared from the nucleophilic substitution of ( 1 ) with 4‐fluoronitrobenzene, followed by the reduction by Fe/HCl. A flexible polyimide ( 4 ) with curable diallyl linkages was prepared from the condensation of ( 3 ) and 4,4′‐oxydiphthalic anhydride in m‐cresol in the presence of isoquinoline. Curing polyimide ( 4 ) at 300 °C leads to thermosetting polyimide ( 5 ). We discussed the amounts of allyl group on T_g, coefficient of thermal expansion, and thermal stability of thermosetting polyimides, and found that thermal properties and dimensional stability of thermosetting polyimides increase with the amounts of cured allyl moieties. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 513–520     

1,2‐Bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile: Enol Ethers and Ketene Acetals as Cycloaddition Partners

(E)‐ and (Z)‐1,2‐bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile ((E)‐ and (Z)‐BTE, resp., =(E)‐ and (Z)‐2,3‐bis(trifluoromethyl)but‐2‐enedinitrile) were used as a stereochemical probe in studying (2+2) cycloadditions of acceptor with donor alkenes. The additions to methyl (E)‐ and (Z)‐propenyl ether gave rise to the eight conceivable cyclobutanes 8 , although in different ratios in reactions of (E)‐ and (Z)‐BTE. The ¹⁹F‐NMR data served the structural assignment and the quantitative analysis. The mechanistic discussion is based on rotations and ring closures of the assumed 1,4‐zwitterionic intermediates. Dimethylketene dimethyl acetal, methylketene dimethyl acetal, and ketene diethyl acetal show an increasing rate in their reactions with BTE as well as in the equilibration of the cycloadducts.     

A Two‐Dimensional Iron(II) Coordination Polymer with Synergetic Spin‐Crossover and Luminescent Properties

A composite material, {[Fe(L)(TPPE)_0.5]?3 CH₃OH}_n, has been constructed by integrating the spin‐crossover (SCO) subunit Fe^II{diethyl(E,E)‐2,2′‐[1,2‐phenyl‐bis(iminomethylidyne)]bis(3‐oxobutanoate)‐(2‐)‐N,N′,O³,O³′} and the highly luminescent connector 1,1,2,2‐tetrakis(4‐(pyridin‐4‐yl)phenyl)‐ethene. Its structure contains four staggered 4×4 layers and intercalated methanol. The packing is dominated by considerable H‐bonds either between adjacent layers and between layers and guests. A crystal‐structure transformation was detected upon removal of the guest molecules. The SCO transition of the solvated crystals is centered at ca. 215 K with a non‐symmetrical hysteresis of 25 K wide, and the desolvated [Fe(L)(TPPE)_0.5]_n exhibits gradual SCO without hysteresis. Intriguingly, the intensity of the fluorescence at 460 nm for the latter is maximized at the SCO transition. The energy transfer between luminescent and SCO entities is achievable as confirmed by theoretical calculations.     

C—H…Cl Hydrogen Bond and π-π Interaction Based Two 3D Supramolecular Architectures of Cu(II) and Co(II) Complexes with Chiral 1,2-Bis(benzimidazol-2-yl) ethane Ligand Containing 2D Grids

合成了两个新的配合物CuLCl₂•2EtOH(1) 和CoLCl₂ (2) [L是( S , S )－1,2－二N－甲基苯并咪唑－1,2－二甲氧基－乙烷],并通过单晶X衍射确定它们的结构。配合物1中,L作为三齿[N, N, O]配体,而配合物2 中,L作为二齿[N, N]配体。这两个配合物共同的结构特点都是通过分子内氢键形成2维的格子结构,然后通过分子间的C－H···Cl型氢键和π–π堆积作用形成3维结构。     

A Simple and Efficient Process for the Synthesis of Novel Heterocycles Containing Benzofuran Moiety Using Thiocarbohydrazide as a Precursor

A simple and efficient process for the synthesis of novel heterocycles starting from thiocarbohydrazide was reported. Reaction of 2‐acetylbenzofuran ( 1 ) and thiocarbohydrazide ( 2 ) in ethanol containing acetic acid produced the corresponding thiocarbohydrazone 3 in 86% yield. Reaction of 3 and isatin ( 4 ) gave N,2‐bis(2‐oxoindolin‐3‐ylidene)hydrazine‐1‐carbothiohydrazine ( 6 ) in 65% yield, rather than the expected product, 3‐[(1‐methyl‐1‐benzofur‐2‐ylmethylidene)amino]‐1‐{[(3Z)‐2‐oxo‐2,3‐dihydro‐1H‐indol‐3‐ylidene]amino}thiourea ( 5 ). Reaction of 2‐((3‐(benzofuran‐2‐yl)‐1‐phenyl‐1H‐pyrazol‐4‐yl)methylene)hydrazine carbothioamide ( 9 ) and chloroacetic acid or hydrazonoyl chloride 11 in basic medium gave (Z)‐2‐((E)‐((3‐(benzofuran‐2‐yl)‐1‐phenyl‐1H‐pyrazol‐4‐yl)methylene)hydrazono)thiazolidin‐4‐one ( 10 ) or 2‐((E)‐2‐((3‐(benzofuran‐2‐yl)‐1‐ phenyl‐1H‐pyrazol‐4‐yl)methylene)hydrazinyl)‐4‐((E)‐(4‐fluorophenyl)diazenyl)‐5‐methylthiazole ( 12 ) in 62% or 74%, respectively.     

A novel two‐dimensional MnII coordination polymer with 1,2‐bis­(imidazol‐1‐yl)­ethane

In the crystal structure of the title complex, poly­[[di­azido­manganese(II)]‐di‐μ‐1,2‐bis­(imidazol‐1‐yl)­ethane‐κ⁴N³:N^3′], [Mn(N₃)₂(C₈H₁₀N₄)₂]_n or [Mn(N₃)₂(bim)₂]_n, where bim is 1,2‐­bis(imidazol‐1‐yl)­ethane, each Mn^II atom is six‐coordinated in a distorted octahedral coordination environment to four N atoms from four bim ligands and two N atoms from two azide ligands. The Mn^II atoms, which lie on inversion centres, are bridged by four bim ligands to form a two‐dimensional (4,4)‐network. The azide ligands are monodentate (terminal).     

Metallierung und C‐C‐Kupplung von 2‐Pyridylmethylamin: Synthese und Strukturen von Methylzink‐2‐pyridylmethylamid,Tris(trimethylsilyl)methylzink‐2‐pyridylmethylamid und (Z)‐1‐Amino‐1,2‐bis(2‐pyridyl)ethen

Metalation and C‐C Coupling Reaction of 2‐Pyridylmethylamine: Synthesis and Structures of Methylzinc‐2‐pyridylmethylamide, Tris(trimethylsilyl)methylzinc‐2‐pyridylmethylamide and (Z)‐1‐Amino‐1,2‐bis(2‐pyridyl)ethene The metalation of 2‐pyridylmethylamine with dimethylzinc yields methylzinc‐2‐pyridylmethylamide ( 1 ), which shows a dimer‐trimer equilibrium in solution. Compound 1 crystallizes trimeric with a Zn₃N₃‐cycle in boat conformation. The endocyclic Zn‐N distances vary between 202 and 206 pm. Heating of this compound in toluene in the presence of dimethylzinc leads to the precipitation of zinc metal and to the formation of a few crystals of bis—[methylzinc‐2‐pyridylmethylamido]‐N, N′‐bis(methylzinc)‐2,3,5,6—tetrakis(2‐pyridyl)‐1,4‐diazacyclohexane ( 2 ). The protolysis of this solution with acetamide gives yellowish (Z)‐1‐amino‐1,2‐dipyridylethene ( 3 ) in a rather poor yield. The enamine tautomer is stabilized by N‐H···N hydrogen bridges. The demanding tris(trimethylsilyl)methyl group at the zinc atom allows the isolation of the dimeric tris(trimethylsilyl)methylzinc‐2‐pyridylmethylamide (4) ₂ in good yield. A C‐C coupling reaction of this compound with dimethylzinc is not possible.     

Synthesis of a One‐dimensional Coordination Polymer Based on Copper(II) Nitrate and 1,2‐Bis(5‐monomethylhydrazinyl‐1H‐tetrazolyl)ethane

A one‐dimensional coordination polymer based on copper(II) nitrate and 1,2‐bis(5‐monomethylhydrazinyl‐1H‐tetrazolyl)ethane as ligand was prepared. The thermal and physical stability was determined by differential scanning calorimetry and BAM methods. The polymer was investigated by vibrational spectroscopy and single X‐ray diffraction. Moreover, the ligand itself and the 1,2‐bis(1H‐tetrazolyl)ethane were characterized as energetic material by bomb calorimetric measurements along with calculations using the EXPLO5 software. Both compounds have moderate energetic properties along with a high thermal and physical stability. These findings render these compounds into promising environment friendly gas generating agents.     

乙烯基锡修饰的双吡唑甲烷第六族金属羰基化合物的合成与反应

通过双吡唑基甲基锂与二苯基乙烯基碘化锡的反应, 合成了桥头碳上带有乙烯基锡修饰的双吡唑甲烷配体。在回流的THF中这些乙烯基锡修饰的双吡唑甲烷配体(R3SnCHPz2, R3Sn为三乙烯基锡或二苯基乙烯基锡;Pz代表取代吡唑)与M(CO)5THF (M = Mo或W)反应产生杂双金属化合物R3SnCHPz2M(CO)3。在这些化合物中,一个乙烯基以h2方式配位到金属钼或钨上,双吡唑甲烷表现为一个三齿k3-(p,N,N)配体。(CH2=CH)3SnCH(3,5-Me2Pz)2W(CO)3和Ph2(CH2=CH)SnCH(3,5-Me2Pz)2W(CO)3与I2的反应也被研究。前者给出化合物CH2(3,5-Me2Pz)2W(CO)4,而后者随着有机锡的丢失产生四元金属杂环化合物CH(3,5-Me2Pz)2W(CO)3I。用PhSNa处理该四元金属杂环化合物导致碘负离子被取代,得到化合物CH(3,5-Me2Pz)2W(CO)3SPh。