Helical metallohost-guest complexes via site-selective transmetalation of homotrinuclear complexes

We have designed a new type of bis(N2O2) chelate ligand that affords a C-shaped O6 site on the metalation of the N2O2 sites. UV-vis and 1H NMR titration clearly showed that the complexation between H4L and zinc(II) acetate affords 1:3 complex [LZn3]2+ via a highly cooperative process. Although the O6-recognition site of the dinuclear metallohost [LZn2] is filled with the additional Zn2+, the O6 site can bind a guest ion with concomitant release of the initially bound Zn2+. The novel recognition process "guest exchange" took place quantitatively when rare earth metals were used as a guest. In the case of alkaline earth metals, selectivity of Ca2+ > Sr2+ > Ba2+ > Mg2+ was observed. On the other hand, the transmetalation did not take place at all when alkali metals were used for the guest. Accordingly, the trinuclear complex [LZn3]2+ is excellent in discriminating charge of the guest ions. The metallohost-guest complexes thus obtained have a helical structure, and the radius d and winding angle theta of the helix depend on the size of the guest. The La3+ complex has the smallest theta (288 degrees), and the Sc3+ complex has the largest theta (345 degrees). Because the radius and winding angles of helices are tunable by changing the guest ion, the helical metallohost-guest complexes are regarded as a molecular spring or coil. Consequently, site-specific metal exchange of trinuclear complex [LZn3]2+ described here will be utilized for highly selective ion recognition, site-selective synthesis of (3d)2(4f) trimetallic complexes, and construction of "tunable" metallohelicenes.     

Non-covalent interactions of alkali metal cations with singly charged tryptic peptides

The complexes formed by alkali metal cations (Cat(+) = Li(+), Na(+), K(+), Rb(+)) and singly charged tryptic peptides were investigated by combining results from the low-energy collision-induced dissociation (CID) and ion mobility experiments with molecular dynamics and density functional theory calculations. The structure and reactivity of [M + H + Cat](2+) tryptic peptides is greatly influenced by charge repulsion as well as the ability of the peptide to solvate charge points. Charge separation between fragment ions occurs upon dissociation, i.e. b ions tend to be alkali metal cationised while y ions are protonated, suggesting the location of the cation towards the peptide N-terminus. The low-energy dissociation channels were found to be strongly dependant on the cation size. Complexes containing smaller cations (Li(+) or Na(+)) dissociate predominantly by sequence-specific cleavages, whereas the main process for complexes containing larger cations (Rb(+)) is cation expulsion and formation of [M + H](+). The obtained structural data might suggest a relationship between the peptide primary structure and the nature of the cation coordination shell. Peptides with a significant number of side chain carbonyl oxygens provide good charge solvation without the need for involving peptide bond carbonyl groups and thus forming a tight globular structure. However, due to the lack of the conformational flexibility which would allow effective solvation of both charges (the cation and the proton) peptides with seven or less amino acids are unable to form sufficiently abundant [M + H + Cat](2+) ion. Finally, the fact that [M + H + Cat](2+) peptides dissociate similarly as [M + H](+) (via sequence-specific cleavages, however, with the additional formation of alkali metal cationised b ions) offers a way for generating the low-energy CID spectra of 'singly charged' tryptic peptides.     

DFT study of the cryptand and benzocryptand and their complexes with alkali metal cations: Li+, Na+, K+

In the present work, a theoretical study of the cryptand 4, 7, 13, 16, 21, 24-hexaoxa-1, 10- diazabicyclo [8,8,8] hexacosan (the named [222]) and the cryptand 5, 6-benzo-4, 7, 13, 16, 21, 24-hexaoxa-1, 10-diazabicyclo [8, 8, 8] hexacosan (the nemed [222B]) had been done using density functional theory (DFT) with B3LYP/6-31G* method in order to obtain the electronic and geometrical structure of the cryptands and their complexes with alkali metal ions: Li(+), Na(+), and K(+). The nucleophilicity of cryptands had been investigated by the Fukui function. For complexes, the match between cation and cavity size, the status of interaction between alkali metal ions and donor atoms in the cryptands and the rigidity of the cryptands had been analyzed through the other calculated parameters. In addition, the enthalpies of complexation reaction and cation exchange reaction had been studied by the calculated thermodynamic data. The calculated results are in a good agreement with the experimental data for the complexes.     

A new surface structural approach to ion adsorption: tracing the location of electrolyte ions

Electrolyte ions differ in size leading to the possibility that the distance of closest approach to a charged surface differs for different ions. So far, ions bound as outersphere complexes have been treated as point charges present at one or two electrostatic plane(s). However, in a multicomponent system, each electrolyte ion may have its own distance of approach and corresponding electrostatic plane with an ion-specific capacitance. It is preferable to make the capacitance of the compact part of the double layer a general characteristic of the solid-solution interface. A new surface structural approach is presented that may account for variation in size of electrolyte ions. In this approach, the location of the charge of the outersphere surface complexes is described using the concept of charge distribution in which the ion charge is allowed to be distributed over two electrostatic planes. It was shown that the concept can successfully describe the pH dependent proton binding and the shift in the isoelectric point (IEP) in the presence of variety of monovalent electrolyte ions, including Li(+), Na(+), K(+), Cs(+), Cl(-), NO(-)(3), and ClO(-)(4) with a common set of parameters. The new concept also sheds more light on the degree of hydration of the ions when present as outersphere complexes. Interpretation of the charge distribution values obtained shows that Cl(-) ions are located relatively close to the surface. The large alkali ions K(+), Cs(+), and Rb(+) are at the largest distance. Li(+), Na(+), NO(-)(3), and ClO(-)(4) are present at intermediate positions.     

Solvent effect on complexation reactions

The inclusion complexation of aromatic amines with cucurbit[6]uril (CB[6]) capped with alkali metal cations was studied spectrophotometrically. We showed that CB[6] capped with alkali metal cations forms a 1:1 inclusion complex with the aromatic amine guests (neutral organic molecules), independent of the length of guest molecules. The effects of salts on the inclusion constants of CB[6] in the presence of different alkali salts were examined and it was found that the inclusion constants increased in the order of alkali cation Cs⁺ < Na⁺ < K⁺, suggesting the interaction of amine guests with the capped alkali metal cation. Further, the structures of the inclusion complexation of aromatic amines with CB[6] were characterized by ¹H NMR measurements. Based on the results, the inclusion abilities of CB[6] capped with alkali metal cations are discussed.     

Adduct formation between alkali metal ions and anionic LV(V)O(2)(-) (L(2-) = tridentate ONS ligands) species: syntheses, structural investigation, and photochemical studies

Syntheses of alkali metal adducts [LVO(2)M(H(2)O)(n)] (1-7) (M = Na(+), K(+), Rb(+), and Cs(+); L = L(1)(-)L(3)) of anionic cis-dioxovanadium(V) species (LVO(2)(-)) of tridentate dithiocarbazate-based Schiff base ligands H(2)L (S-methyl-3-((5-(R-2-hydroxyphenyl))methyl)dithiocarbazate, R = H, L = L(1); R = NO(2), L = L(2); R = Br, L = L(3)) have been reported. The LVO(2)(-) moieties here behave like an analogue of carboxylate group and have displayed interesting variations in their binding pattern with the change in size of the alkali metal ions as revealed in the solid state from the X-ray crystallographic analysis of 1, 3, 6, and 7. The compounds have extended chain structures, forming ion channels, and are stabilized by strong Coulombic and hydrogen-bonded interactions. The number of coordinated water molecules in [LVO(2)M(H(2)O)(n)] decreases as the charge density on the alkali metal ion decreases (n = 3.5 for Na(+) and 1 for K(+) and Rb(+), while, for Cs(+), no coordinated water molecule is present). In solution, compounds 1-7 are stable in water and methanol, while in aprotic solvents of higher donor strengths, viz. CH(3)CN, DMF and DMSO, they undergo photoinduced reduction when exposed to visible light, yielding green solutions from their initial yellow color. The putative product is a mixed-oxidation (mu-oxo)divanadium(IV/V) species as revealed from EPR, electronic spectroscopy, dynamic (1)H NMR, and redox studies.     

Binding of inorganic cations by p-sulfonatocalix[4]arene monitored through competitive fluorophore displacement in aqueous solution

A new working principle for detecting inorganic cation binding by water-soluble calix[4]arenes involves the displacement of a fluorescent azoalkane as guest. Fluorescence regeneration is observed for various metal ions, and binding of monovalent cations (alkali and ammonium) to p-sulfonatocalix[4]arene is detected and quantified for the first time.     

Cesium-ion selective electrodes based on calix[4]arene dibenzocrown ethers

Four calix[4]arene dibenzocrown ether compounds have been prepared and evaluated as Cs(+)-selective ligands in solvent polymeric membrane electrodes. The ionophores include 25,27-bis(1-propyloxy)calix[4]arene dibenzocrown-6 1, 25,27-bis(1-alkyloxy)calix[4]arene dibenzocrown-7s 2 and 3, and 25,27-bis(1-propyloxy)calix[4]arene dibenzocrown-8 4. For an ion-selective electrode (ISE) based on 1, the linear response concentration range is 1x10(-1) to 1x10(-6) M of Cs(+). Potentiometric selectivities of ISEs based on 1-4 for Cs(+) over other alkali metal cations, alkaline earth metal cations, and NH(4)(+) have been assessed. For 1-ISE, a remarkably high Cs(+)/Na(+) selectivity was observed, the selectivity coefficient (K(Cs,Na)(Pot)) being ca. 10(-5). As the size of crown ether ring is enlarged from crown-6 (1) to crown-7 (2 and 3) to crown-8 (4), the Cs(+) selectivity over other alkali metal cations, such as Na(+) and K(+), is reduced successively. Effects of membrane composition and pH in the aqueous solution upon the electrode properties are also discussed.     

A new type of ionophore family utilizing the cation-olefinic pi interaction: theoretical study of [n]beltenes

The possible utilization of [n]beltenes as a new family of ionophores, which exhibit a cation-olefinic pi type of interaction in contrast to the cation-aromatic pi type of interaction exhibited by [n]collarenes, has been investigated using both ab initio calculations and molecular dynamic simulations. Like [n]collarenes, n ethene groups are linked by -CH(2)- linkages in the [n]beltenes. Our calculations indicate that these [n]beltenes exhibit strong binding affinities and high selectivity for alkali metal cations ([5]beltene to Li(+), [6]beltene to Na(+), [7]beltene to Na(+) and K(+), [8]beltene to K(+) and Rb(+), and [9]beltene to Cs(+) and Rb(+)). Compared to [n]collarenes, [n]beltenes are expected to have a finer ion selectivity because their cavity sizes can be varied with integral number n, while that of the former can be varied with an even number n. Suitable substituents could be employed to enhance both the binding and specificity of various sizes of [n]beltenes to different cations, as well as to increase the solubility.     

Constraining of small-ring cyclic ether triads by stereodefined spiroannulation to an inositol orthoformate platform. Solution- and gas-phase alkali metal binding affinities for three- to five-membered ring structural combinations.

The structural features most conducive to complexation of the alkali metal ions Li(+), Na(+), and K(+) in a series of constrained inositol orthoformate derivatives have been probed in solution, in the solid state, and in the gas phase by electrospray ionization mass spectrometry. The eight spirotricyclic polyethers differ in the size of the rings containing the potentially ligating oxygen atoms. Although the ring sizes have been limited to three to five atoms inclusively, the combinations of oxirane, oxetane, and tetrahydrofuran are rather extensive and consist of many options. The overall trend for lithium ion affinity is [5.5.5] > [ 5.5.4] > [4.4.4] > [5.5.3] > [5.4.3] > [4.4.3] > [1.1.1] > [3.3.1], an ordering that correlates with the differing polarizabilities of the oxygen atoms, ease of alignment of the nonbonded electron pairs, and the overall size of the ligand as gauged by nonbonded O......O distances.     

Nitroxide radicals as probes for exploring the binding properties of the cucurbit[7]uril host

EPR spectroscopy was used for the first time to explore the binding properties of cucurbit[7]uril (CB7), a representative member of the cucurbituril family. Evidence for the formation of a complex between nitroxide radicals and the host system in an aqueous solution was provided by large changes in the nitrogen hyperfine splitting, attributed to the different polar environments experienced by the included radical. In the presence of alkali cations, the EPR spectra of benzyl tert-butyl nitroxide were characterised by new signals attributed to the radical hosted in the CB7 cavity in which one metal cation is in close contact with the nitroxidic oxygen. The formation of the coordination complex results in a substantial increase in the electron spin density on the nitrogen in inverse order with respect to the size of the cation owing to increased localisation of negative charge on the oxygen atom from bonding to the alkali cation. The EPR spectra showed selective line-broadening effects as a result of metal exchange between bulk water and the coordination complex. Analysis of the EPR linewidth variations allowed us to measure the corresponding kinetic rate constants for the first time. NMR spectroscopy showed that this behaviour is not peculiar to nitroxides but is also exhibited by the related carbonyl compounds. These data allowed us to quantify the template effect and to reach the conclusion that, in the presence of a guest having a coordinating lone pair, the formation of ternary metal-guest-CB complexes must be taken into account when discussing the complexation behaviour of cucurbituril derivatives in the presence of salts.     

Solvent-free MALDI investigation of the cationization of linear polyethers with alkali metals

The MALDI technique with solvent-free sample preparation has been applied to evaluate relative gas-phase affinities of polyether chain polymers with alkali metal cations. The study is performed on poly(ethylene glycol) and poly(propylene glycol) polymers of different lengths (PEG600, PEG1000, PPG425, PPG750) and the alkali metal cations Li(+), Na(+), K(+), and Cs(+). The experiments show that the lattice energy of the alkali metal salts employed as cation precursors can have a strong influence on the outcome of conventional MALDI measurements. With the solvent-free method, these crystal binding effects can be made negligible by combining in the same sample alkali metal salts with different counterions. The recorded MALDI spectra show that the polyether-cation aggregation efficiencies decrease systematically with growing cation size. This cation size selectivity is considerably enhanced for the polymers with the shorter chains, which can be attributed to the reduced ability of the polymer to build a coordination shell around the larger cations. The steric effects introduced by the side CH3 group of propylene glycol with respect to ethylene glycol also enhance the preference for cationization of the polymer by the smaller cations. These observations correct some qualitative trends derived from previous studies, which did not account for lattice energy effects of the cation precursors.     

The solvent extraction of alkali metal picrates with 4,13-N,N'-dibenzyl-4,13-diaza-18-crown-6

Extraction of alkali metal picrates with N,N'-dibenzyl-18-crown-6 was carried out, with dichloromethane as water-immiscible solvent, as a function [ligand]/[metal cation]. The extractability of metal picrates (Li(+), Na(+), K(+), Rb(+), Cs(+)) was evaluated as a function of [L]/[M(+)]. The extractability of complex cation-picrate ion pairs decreases in this sequence: Li(+)>Rb(+)>Cs(+)>K(+)>Na(+). The overall extraction equilibrium constants (K(ex)) for complexes of N,N'-dibenzyl-18-crown-6 with alkali metal picrates between dichloromethane and water have been determined at 25 degrees C. The values of the extraction constants (logK(ex)) were determined to be 10.05, 6.83, 7.12, 7.83, 6.73 for Li(+), Na(+), K(+), Rb(+) and Cs(+) compounds, respectively. DB186 shows almost 2-fold extractability against Li(+) compared to the other metal picrates, whereas it shows no obvious extractability difference amongst the other metal cations when [L]/[M(+)] is 0.2-1. However, an increasing extractability is observed for Cs(+) when [L]/[M(+)] [1].     

Allosteric pitch length tuning of a dinuclear double helicate

Self assembly of the ditopic ligand L1 with Cu2+ gives the dinuclear double helicate [Cu2(L1)2]4+, which can further coordinate s-block cations. This coordination alters the helicate pitch to a variety of different lengths depending on the size and charge of the guest cation.     

Oligoether-strapped calix[4]pyrrole: an ion-pair receptor displaying cation-dependent chloride anion transport

A ditopic ion-pair receptor (1), which has tunable cation- and anion-binding sites, has been synthesized and characterized. Spectroscopic analyses provide support for the conclusion that receptor 1 binds fluoride and chloride anions strongly and forms stable 1:1 complexes ([1·F](-) and [1·Cl](-)) with appropriately chosen salts of these anions in acetonitrile. When the anion complexes of 1 were treated with alkali metal ions (Li(+), Na(+), K(+), Cs(+), as their perchlorate salts), ion-dependent interactions were observed that were found to depend on both the choice of added cation and the initially complexed anion. In the case of [1·F](-), no appreciable interaction with the K(+) ion was seen. On the other hand, when this complex was treated with Li(+) or Na(+) ions, decomplexation of the bound fluoride anion was observed. In contrast to what was seen with Li(+), Na(+), K(+), treating [1·F](-) with Cs(+) ions gave rise to a stable, host-separated ion-pair complex, [F·1·Cs], which contains the Cs(+) ion bound in the cup-like portion of the calix[4]pyrrole. Different complexation behavior was seen in the case of the chloride complex, [1·Cl](-). Here, no appreciable interaction was observed with Na(+) or K(+). In contrast, treating with Li(+) produces a tight ion-pair complex, [1·Li·Cl], in which the cation is bound to the crown moiety. In analogy to what was seen for [1·F](-), treatment of [1·Cl](-) with Cs(+) ions gives rise to a host-separated ion-pair complex, [Cl·1·Cs], in which the cation is bound to the cup of the calix[4]pyrrole. As inferred from liposomal model membrane transport studies, system 1 can act as an effective carrier for several chloride anion salts of Group 1 cations, operating through both symport (chloride+cation co-transport) and antiport (nitrate-for-chloride exchange) mechanisms. This transport behavior stands in contrast to what is seen for simple octamethylcalix[4]pyrrole, which acts as an effective carrier for cesium chloride but does not operates through a nitrate-for-chloride anion exchange mechanism.     

Scavenging effects of metal complexes of water-soluble thiacalix[4]arenetetrasulfonate on superoxide anion radicals

The scavenging effects of metal complexes of thiacalix[4]arenetetrasulfonate (Me-TCAS[4], Me=H?, Fe3(+), Mn3(+), Mn2(+), Cu2(+), and Zn2(+)) on superoxide anion radicals (O??) generated from the xanthine-xanthine oxidase system were investigated by the nitroblue tetrazolium (NBT) method and electron spin resonance (ESR) spin-trapping method using 5,5-dimethyl-1-pyrroline-N-oxide as a trapping reagent. As a reference, calix[4]arenetetrasulfonate (H?)-CAS[4]), calix[6]arenehexasulfonate (H?-CAS[6]) and calix[8]areneoctasulfonate (H?-CAS[8]) were also examined. The results by the NBT method indicated that Fe3(+)- and Mn3(+)-TCAS[4] exhibited the highest O?? scavenging activity among Me-TCAS[4] and H?-CAS[n] (n = 4, 6, 8) in this study. The IC?? values of Fe3(+)- and Mn3(+)-TCAS[4] for O?? scavenging activity were estimated to be 5.3 and 7.8 μM, respectively, and were almost the same as those of tannin acid, catechin and their derivatives, which are known as very effective scavengers of O??. Scavenging activities were in the order of Fe3(+)- and Mn3(+)-TCAS[4]>Mn2(+)-, Cu2(+)-, and Zn(2+)-TCAS[4]>H(2)-TCAS[4] and H?-CAS[n] (n=4, 6, 8). Each activity of Me-TCAS[4] (Me=Fe3(+), Mn3(+), Mn2(+), Cu2(+), and Zn2(+)) was higher than that of the corresponding metal ion, indicating that H?-TCAS[4] has the ability to raise the activity of the metal ion itself by forming a complex. Also, the ESR spin-trapping method revealed that Fe3(+)- and Mn3(+)-TCAS[4] showed high O?? scavenging activities, similarly to the results by the NBT method.     

Infrared multiple photon dissociation spectroscopy of cationized histidine: effects of metal cation size on gas-phase conformation

The gas phase structures of cationized histidine (His), including complexes with Li(+), Na(+), K(+), Rb(+), and Cs(+), are examined by infrared multiple photon dissociation (IRMPD) action spectroscopy utilizing light generated by a free electron laser, in conjunction with quantum chemical calculations. To identify the structures present in the experimental studies, measured IRMPD spectra are compared to spectra calculated at B3LYP/6-311+G(d,p) (Li(+), Na(+), and K(+) complexes) and B3LYP/HW*/6-311+G(d,p) (Rb(+) and Cs(+) complexes) levels of theory, where HW* indicates that the Hay-Wadt effective core potential with additional polarization functions was used on the metals. Single point energy calculations were carried out at the B3LYP, B3P86, and MP2(full) levels using the 6-311+G(2d,2p) basis set. On the basis of these experiments and calculations, the only conformation that reproduces the IRMPD action spectra for the complexes of the smaller alkali metal cations, Li(+)(His) and Na(+)(His), is a charge-solvated, tridentate structure where the metal cation binds to the backbone carbonyl oxygen, backbone amino nitrogen, and nitrogen atom of the imidazole side chain, [CO,N(α),N(1)], in agreement with the predicted ground states of these complexes. Spectra of the larger alkali metal cation complexes, K(+)(His), Rb(+)(His), and Cs(+)(His), have very similar spectral features that are considerably more complex than the IRMPD spectra of Li(+)(His) and Na(+)(His). For these complexes, the bidentate [CO,N(1)] conformer in which the metal cation binds to the backbone carbonyl oxygen and nitrogen atom of the imidazole side chain is a dominant contributor, although features associated with the tridentate [CO,N(α),N(1)] conformer remain, and those for the [COOH] conformer are also clearly present. Theoretical results for Rb(+)(His) and Cs(+)(His) indicate that both [CO,N(1)] and [COOH] conformers are low-energy structures, with different levels of theory predicting different ground conformers.     

Potential-dependent vibrational spectroscopy of solvent molecules at the Pt(111) electrode in a water/acetonitrile mixture studied by sum frequency generation

Sum frequency generation (SFG) vibrational spectra of D(2)O and/or acetonitrile (CH(3)CN) on a Pt(111) single-crystal electrode were obtained as a function of applied potential in a 5 mol % water/acetonitrile mixed solvent with different 0.1 molar MSO(3)CF(3) salts (M = H(+), Li(+), Na(+), K(+), and Cs(+)). The results provide a very specific model for the composition of the inner Helmholtz layer as a function of potential and surface charge. Acetonitrile dominates the inner layer with the CN group directed toward the metal at potentials where the metal has a positive charge. As the surface becomes negatively charged, the acetonitrile orientation flips 180 degrees, with the CH(3) group pointing toward the surface. At even more negative surface charge, D(2)O displaces acetonitrile from the inner layer and is the predominant molecule on the surface. Here water is present as an oriented molecule with the oxygen end pointing toward the metal. The potential (and surface charge) where water is the dominant molecule in the inner Helmholtz layer is determined by the solvation energy of the cation.     

Homotropic negative allostery in alkali metal ion recognition by biscalix[4]arene-based receptor

A novel host which shows homotropic and negative allostery for alkali metal ion recognition is constructed by utilizing a biscalix[4]arene skeleton bearing biphenyls and ester moieties. As the ionic radius of the guest increases, recognition of the second guest is suppressed more effectively. A larger ion changes the structure of the first binding site more drastically to cause conformational change unfavorable for the guest binding of the second site.     

Inclusion behavior of water-soluble thiacalix- and calix[4]arenes towards substituted benzenes in aqueous solution

Inclusion abilities of thiacalix- and calix[4]arenetetrasulfonate (3 and 4) towards mono-substituted benzenes were investigated in neutral aqueous solution. In general, the hosts regioselectively encapsulated the guests from the aromatic moiety except the complexation of toluene by 4, in which the guest penetrated from either the aromatic or the methyl group. Stabilities of the inclusion complexes increased with the electron-withdrawing ability of the substituent on the guest, suggesting pi-pi electronic interaction between the host and guest. In spite of the lower electron density of the aromatic ring, thiacalix[4]arene 3 showed higher inclusion ability than calix[4]arene 4, suggesting that the size rather than the electron density of the calix framework is a more important factor in determining the inclusion ability.