Synthesis and characterization of dimetallic oxorhenium(V) and dioxorhenium(VII) compounds, and a study of stoichiometric and catalytic reactions

Chelating dithiolate ligands--e.g., mtp from 2-(mercaptomethyl)thiophenol, edt from 1,2-ethanedithiol, and pdt from 1,3-propanedithiol--stabilize high-valent oxorhenium(V) against hydrolytic and oxidative decomposition. In addition to the dithiolate chelating to a single rhenium, one sulfur forms a coordinate bond to the other rhenium. In one arrangement this gives a dimer with a nearly planar diamond core with different internal Re-S distances. The new compounds are [MeReO(edt)](2) (2) and [MeReO(pdt)](2) (3), which can be compared to the previously known [MeReO(mtp)](2) (1). Another mode of synthesis leads to [ReO](2)(mtp)(3) (5) and [ReO](2)(edt)(3) (6). They, too, have similar Re(2)S(2) cores that involve donor atoms from two of the dithiolate ligands; the third dithiolate chelates one of the rhenium atoms. Gentle hydrolysis of 1 affords [Bu(n)4][[MeReO(mtp)](2)(mu-OH)] (7) in low yield. It appears to be the first example of this structural type for rhenium. The use of dithioerythritol as a starting material allowed the synthesis of a dioxorhenium(VII) compound, [MeReO(2)](2)(dte) (8). Its importance lies in understanding the role such compounds are believed to play as intermediates in oxygen atom catalysis. Ligation of the dimers 1-3 converts them into monomeric compounds, MeReO(dithiolate)L. These reactions go essentially to completion for L = PPh(3), but reach an equilibrium for L = NC(5)H(4)R. With R = 4-Ph, the values of K/10(3) L mol(-1) for the reactions (1-3) + 2L = 2MeReO(dithiolate)L are identical within 3 sigma: 1.15(3) (1), 1.24(4) (2), and 1.03(16) (3). The rates of monomer formation follow the rate law -d ln [dimer]/dt = k(a)[L] + k(b)[L](2). These trends were found: (1) phosphines are slow to react compared to pyridines, (2) the edt dimer 2 reacts much more rapidly than 1 and 3. Dimer 1 and MeReO(mtp)PPh(3) both catalyze oxygen atom transfer: PicO + PPh(3) --> Pic + Ph(3)PO. Compound 1 is ca. 90 times more reactive, which can be attributed to its lability toward small ligands as opposed to the low rate of displacement of PPh(3) from the mononuclear catalyst. The kinetics of this reaction follows the rate law -d[PicO]/dt = k[PicO][1]/[1 + kappa[PPh(3)]], with k = 5.8 x 10(6) L mol(-1) s(-1) and kappa = 3.5 x 10(2) L mol(-1) at 23 degrees C in benzene. A mechanism has been proposed to account for these findings.     

Kinetics and mechanism of rhenium-catalyzed oxygen atom transfer from pyridine N-oxides to phosphines

The oxygen atom transfer (OAT) reaction cited does not occur on its own in >10 h. Oxorhenium(V) compounds having the formula MeReO(dithiolate)PZ(3) catalyze the reaction; the catalyst most studied was MeReO(mtp)PPh(3), 1, where mtpH(2) = 2-(mercaptomethyl)thiophenol. The mechanism was studied by multiple techniques. Kinetics (initial-rate and full-time-course methods) established this rate law: v = k(c)[1][PyO](2)[PPh(3)](-1). Here and elsewhere PyO symbolizes the general case XC(5)H(4)NO and PicO that with X = 4-Me. For 4-picoline, k(c) = (1.50 +/- 0.05) x 10(4) L mol(-1) s(-1) in benzene at 25.0 degrees C; the inverse phosphine dependence signals the need for the removal of phosphine from the coordination sphere of rhenium prior to the rate-controlling step (RCS). The actual entry of PPh(3) into the cycle occurs in a fast step later in the catalytic cycle, after the RCS; its relative rate constants (k(4)) were evaluated with pairwise combinations of phosphines. Substituent effects were studied in three ways: for (YC(6)H(4))(3)P, a Hammett correlation of k(c) against 3sigma gives the reaction constant rho(c)(P) = +1.03, consistent with phosphine predissociation; for PyO rho(c)(N) = -3.84. It is so highly negative because PyO enters in three steps, each of which is improved by a better Lewis base or nucleophile, and again for (YC(6)H(4))(3)P as regards the k(4) step, rho(4) = -0.70, reflecting its role as a nucleophile in attacking a postulated dioxorhenium(VII) intermediate. The RCS is represented by the breaking of the covalent N-O bond within another intermediate inferred from the kinetics, [MeReO(mtp)(OPy)(2)], to yield the dioxorhenium(VII) species [MeRe(O)(2)(mtp)(OPy)]. A close analogue, [MeRe(O)(2)(mtp)Pic], was identified by (1)H NMR spectroscopy at 240 K in toluene-d(8). The role of the "second" PyO in the rate law and reaction scheme is attributed to its providing nucleophilic assistance to the RCS. Addition of an exogenous nucleophile (tetrabutylammonium bromide, Py, or Pic) caused an accelerating effect. When Pic was used, the rate law took on the new form v = k(NA)[1][PicO][Pic][PPh(3)](-1); k(NA) = 2.6 x 10(2) L mol(-1) s(-1) at 25.0 degrees C in benzene. The ratio k(c)/k(NA) is 58, consistent with the Lewis basicities and nucleophilicities of PicO and Pic.     

Ligand displacement and oxidation reactions of methyl(oxo)rhenium(V) complexes

Compounds that contain the anion [MeReO(edt)(SPh)](-) (3-) were synthesized with the countercations 2-picolinium (PicH+3-) and 2,6-lutidinium (LutH+3-), where edt is 1,2-ethanedithiolate. Both PicH+3- and MeReO(edt)(tetramethylthiourea) (4) were crystallographically characterized. The rhenium atom in each of these compounds exists in a five-coordinate distorted square pyramid. In the solid state, PicH+3- contains an anion with a short (d(SH) = 232 pm) and nearly linear hydrogen-bonded (N-H.S) interaction to the cation. Ligand substitution reactions were studied in chloroform. Displacement of PhSH by PPh(3) follows second-order kinetics, d[MeReO(edt)(PPh(3))]/dt = k[PicH+3-][PPh3], whereas with pyridines an unusual form was found, d[MeReO(edt)(Py)]/dt = k[PyH+3-][Py](2), in which the conversion of PicH+3- to PyH+3- has been incorporated. Further, added Py accelerates the formation of [MeReO(edt)(PPh3)], v = k.[PicH+3-].[PPh3].[Py]. Compound 4, on the other hand, reacts with both PPh(3) and pyridines, L, at a rate given by d[MeReO(edt)(L)]/dt = k.[4].[L]. When PicH+3- reacts with pyridine N-oxides, a three-stage reaction was observed, consistent with ligand replacement of SPh(-) by PyO, N-O bond cleavage of the PyO assisted by another PyO, and eventual decomposition of MeRe(O)(edt)(OPy) to MeReO(3). Each of first two steps showed a large substituent effect; Hammett analysis gave rho(1) = -5.3 and rho(2) = -4.3.     

Rhenium(V) complexes with thiolato and dithiolato ligands: synthesis, structures, and monomerization reactions

The new compound {(PhS)(2)ReO(mu-SPh)}(2), 1, was synthesized from Re(2)O(7) and PhSH and then used as the synthon for a number of hitherto unknown oxorhenium(V) compounds. Reactions between dithiols and 1 (2:1 ratio) afford {PhSReO(dt)}(2), where the dithiols, dtH(2), are 1,2-ethanedithiol (edtH(2)), 1,3-propanedithiol (pdtH(2)), 1,3-butanedithiol (pdtMeH(2)), 1,2-benzenedithiol (bdtH(2)), 2-(mercaptomethyl)thiophenol (mtpH(2)), and 2-mercaptoethyl sulfide (mesH(2)). Similar reactions carried out with a 3:1 ratio of dtH(2) to 1 afford [(ReO)(2)(dt)(3)], dt = edt, pdt. When NEt(3) was introduced prior to the 3:1 reaction between edtH(2) and 1, a compound containing an anionic complex was isolated, [PPh(4)][ReO(edt)(2)]. The new compounds were characterized analytically, spectroscopically, and crystallographically. The Re-O groups in two of the compounds, 1 and {ReO(mu-SPh)(bdt)}(2), exist in rare anti orientations; the others adopt the more familiar syn geometry, as discussed. Selected monomerization reactions of {PhSReO(dt)}(2) were also carried out: {PhSReO(dt)}(2) + 2L = 2[PhSReO(dt)L]. The rate for L = 4-phenylpyridine is given by v = {k(a)[L] + k(b)[L](2)} x [{PhSReO(dt)}(2)], as it is for the reactions of {MeReO(dt)}(2); for all of these compounds, the reaction proceeds nearly entirely by the third-order pathway. Values of k(b)/L(2) mol(-2) s(-1) at 25.0 degrees C are 5.8 x 10(2) (mtp), 2.97 x 10(3) (pdt), 4.62 x 10(5) (edt), and 3.87 x 10(5) (bdt). The rate law for the reactions of {PhSReO(dt)}(2) with L = PAr(3) is v = k(a)[L]/{1 + kappa[L]} x [{PhSReO(dt)}(2)]. For PPh(3), values at 25.0 degrees C of k(a)/L mol(-1) s(-1) (kappa/L mol(-1)) for {PhSReO(dt)}(2) are 9.64 x 10(-2) (1.87) for mtp, 3.43 x 10(-2) (0.492) for pdt, 1.91 (1.42) for edt, 1.84 x 10(-2) (0.82) for bdt, and 1.14 x 10(3) (10.6) for 1. Mechanisms are proposed that are consistent with the data obtained and with earlier work.     

New oxorhenium(V) compound for catalyzed oxygen atom transfer from picoline N-oxide to triarylphosphines

The synthesis and characterization of a new oxorhenium(V) compound is reported; it is [MeReO(edt)(bpym)], 8, where edt = 1,2-ethanedithiolate and bpym = 2,2'-bipyrimidine. Compound 8 was characterized by NMR spectroscopy and single-crystal X-ray analysis. It exists as a six-coordinate Re(V) compound comparable to the previously known [MeReO(edt)(bpy)] and [MeReO(mtp)(bpy)]. Compound 8 catalyzes the oxygen-atom-transfer reaction PicO + PZ3 --> Pic + Z3PO, whereas the other two do not. The kinetics of this reaction with catalyst 8 follows the rate law -d[PicO]/dt = k[8][PicO]/(1 + c[PZ3]). With different phosphines, the rate law has the same k value, 4.17 L mol(-1) s(-1), but different c values. For tritolylphosphine, c = 67.5 L mol(-1) in benzene at 25 degrees C. A mechanism has been proposed to account for these findings. The data establish that an open coordination site on rhenium is necessary for oxygen-atom-transfer reactions.     

Issues of microscopic reversibility and an isomeric intermediate in ligand substitution reactions of five-coordinate oxorhenium(V) dithiolate complexes.

Ligand substitution reactions between five-coordinate oxorhenium(V) dithiolates, [CH(3)ReO(SCH(2)C(6)H(4)S)X], or MeReO(mtp)X, and entering ligands Y have been studied; Y is a phosphine and X is a phosphine (usually) or a pyridine. Many of them occur in two distinct stages, and other two-stage reactions merge to a single kinetic term when the successive rate constants are quite different in value. An intermediate can be detected directly by electronic and NMR spectroscopy. Just for phosphines, the range of rate constants is remarkably large; in the first stage, k spans the range 10(-)(4)-10(1) L mol(-)(1) s(-)(1) at 25 degrees C in benzene; in the second, which also shows a first-order dependence on the concentration of the entering ligand, the range is 10(-)(4)-10(3) L mol(-)(1) s(-)(1). Spectroscopic evidence shows that the intermediate has the same composition as the product; the metastable form is designated as MeReO(mtp)Y. The structures of all the isolated products MeReO(mtp)Y have a single stereochemistry: Me and -SCH(2) lie in trans positions, as do Y and -SAr. This structure is believed to be reversed in the transient, Y and -SCH(2) occupying trans positions. Further support for this assignment comes from the (31)P splitting of the (1)H NMR spectrum, where additional coupling indicates unusual four-bond coupling from a W-pattern of the hydrogen and phosphorus atoms. The intermediate does not undergo an intramolecular rearrangement to the final product; instead, it reacts with a ligand of the same type in an intermolecular reaction leading to rearrangement. The activation parameters were determined for selected reactions, and the results support a mechanism with considerable associative character; DeltaS() values are ca. -125 J K(-)(1) mol(-)(1). Because ligand Y must enter the coordination sphere from the vacant coordination position trans to the Re=O group, a means must be devised for the leaving group X to gain that position. To account for the intervention of the isomer while honoring the principle of microscopic reversibility, two mechanisms are proposed. One involves a C(3) ("turnstile") rotation of a specific group of three ligands in the six-coordinate transition state. Turnstile rotation of the groups X, Me, and Y can accomplish the needed transposition; the transition state passes through an approximate trigonal prismatic configuration, giving rise to a different and less stable isomer. The alternative mechanism, which may more easily accommodate data for Y = Me(2)bpy, involves rearrangement of the common octahedral intermediate to a pentagonal pyramid. The arrangement of ligands in the intermediate, governed by their sizes, determines that isomerization accompanies product formation. Following either rearrangement, a second reaction, between MeReO(SCH(2)C(6)H(4)S)Y and Y, then ensues by the same mechanism. The second rearrangement process then generates the more stable isomer of the product. Results are also presented from a study of monomerization of the dimeric rhenium species, [MeReO(mtp)](2), with phosphines(X) of various size and basicity. The results support a mechanism with two intermediates on the pathway to MeReO(mtp)X.     

Kinetics, mechanism, and computational studies of rhenium-catalyzed desulfurization reactions of thiiranes (thioepoxides)

The oxorhenium(V) dimer {MeReO(edt)}2 (1; where edt = 1,2-ethanedithiolate) catalyzes S atom transfer from thiiranes to triarylphosphines and triarylarsines. Despite the fact that phosphines are more nucleophilic than arsines, phosphines are less effective because they rapidly convert the dimer catalyst to the much less reactive catalyst [MeReO(edt)(PAr3)] (2). With AsAr3, which does not yield the monomer, the rate law is given by v = k[thiirane][1], independent of the arsine concentration. The values of k at 25.0 degrees C in CDCl3 are 5.58 +/- 0.08 L mol(-1) s(-1) for cyclohexene sulfide and ca. 2 L mol(-1) s(-1) for propylene sulfide. The activation parameters for cyclohexene sulfide are deltaH(double dagger) = 10.0 +/- 0.9 kcal mol(-1) and deltaS(double dagger) = -21 +/- 3 cal K(-1) mol(-1). Arsine enters the catalytic cycle after the rate-controlling release of alkene, undergoing a reaction with the Re(VII)(O)(S) intermediate that is so rapid in comparison that it cannot be studied directly. The use of a kinetic competition method provided relative rate constants and a Hammett reaction constant, rho = -1.0. Computations showed that there is little thermodynamic selectivity for arsine attack at O or S of the intermediate. There is, however, a large kinetic selectivity in favor of Ar3AsS formation: the calculated values of deltaH(double dagger) for attack of AsAr3 at Re=O vs Re=S in Re(VII)(O)(S) are 23.2 and 1.1 kcal mol(-1), respectively.     

Catalysis by methyltrioxorhenium(VII): reduction of hydronium ions by europium(II) and reduction of perchlorate ions by europium(II) and chromium(II)

The title reactions occur stepwise, the first and fastest being MeReO3 + Eu2+ --> Re(VI) + Eu3+ (k298 = 2.7 x 10(4) L mol(-1) s(-1)), followed by rapid reduction of Re(VI) by Eu2+ to MeReO2. The latter species is reduced by a third Eu2+ to Re(IV), a metastable species characterized by an intense charge transfer band, epsilon410 = 910 L mol(-1) cm(-1) at pH 1; the rate constant for its formation is 61.3 L mol(-1) s(-1), independent of [H+]. Yet another reduction step occurs, during which hydrogen is evolved at a rate v = k[Re(IV)][Eu2+][H+](-1), with k = 2.56 s(-1) at mu = 0.33 mol L(-1). The 410 nm Re(IV) species bears no ionic charge on the basis of the kinetic salt effect. We attribute hydrogen evolution to a reaction between H-ReVO and H3O+, where the hydrido complex arises from the unimolecular rearrangement of Re(III)-OH in a reaction that cannot be detected directly. Chromium(II) ions do not evolve H2, despite E(Cr) degrees approximately E(EU) degrees. We attribute this lack of reactivity to the Re(IV) intermediate being captured as [Re(IV)-O-Cr(III)]2+, with both metals having substitutionally inert d3 electronic configurations. Hydrogen evolution occurs in chloride or triflate media; with perchlorate present, MeReO2 reduces perchlorate to chloride, as reported previously [Abu-Omar, M. M.; Espenson, J. H. Inorg. Chem. 1995, 34, 6239-6240].     

Studies of C-S bond cleavage reactions of Re(V) dithiolates: synthesis, reactivity, and mechanism

A series of rhenium(V) complexes, [(X)(ReO)(dt)(PPh(3))] and [(o-SC(6)H(4)PPh(2))(ReO)(mtp)], were prepared to explore electronic effects on the C-S cleavage reaction that occurs upon reaction with PAr(3) at ambient temperature [where X = S(C(6)H(4)-p-Z) (Z = OMe, Me, H, F, Cl), OPh, Cl, and SC(2)H(5), and dt is the chelating dithiolate ligand derived from 2-(mercaptomethyl)thiophenol, 1,2-ethanedithiol, 1,3-propanedithiol, 1,3-butanedithiol, and 2,4-pentanedithiol]. The scope and selectivity of the C-S activation were examined. The C-S bond cleavage to form metallacyclic Re(V) complexes with a ReS core occurs only for the complexes with mtp and pdt frameworks and X = SAr and SC(2)H(5). The difference in reactivity is due to the different donating abilities of ancillary and dithiolate ligands, especially their pi-donating ability, which plays a critical role in C-S activation. The kinetics of the C-S activation process was determined; nucleophilic attack of PPh(3) on the oxo group of the Re(V)O core appears to be the rate-controlling step. The reaction is accelerated by electron-poor ArS ligands, but is unaffected by the substituents on phosphines. A detailed mechanistic study is presented. The results represent a rare example of migration of alkanethiolate leading to the formation of alkylthiolato complexes.     

Kinetics and mechanism of oxygen atom abstraction from a dioxo-rhenium(VII) complex

The kinetics of reaction between triarylphosphanes and two newly prepared dioxorhenium(VII) compounds has been evaluated. The compounds are MeRe(VII)(O)(2)("O,S") in which "O,S" represents an alkoxo, thiolato chelating ligand. With MeReO(3), ligands derived from 1-mercaptoethanol and 1-mercapto-2-propanol form MeRe(O)(2)(met), 2, and MeRe(O)(2)(m2p), 3. These compounds persist in chloroform solution for several hours at room temperature and for 2-3 weeks at -22 degrees C, particularly when water is carefully excluded. They were obtained as red oils with clean (1)H NMR spectra, but attempts to obtain pure, crystalline products were not successful because one decomposition pathway shows a kinetic order >1. The fastest reaction occurs between P(p-MeOC(6)H(4))(3) and 2; k(298) = 215(7) L mol(-1) s(-1) in chloroform at 25(1) degrees C. The other rate constants follow a Hammett correlation against 3sigma, with rho = -0.69(7). This study relates to oxygen atom transfer reactions catalyzed by MeReO(mtp)PPh(3), 1, in which MeRe(O)(2)(mtp), 4, is a postulated intermediate that does not build up to a measurable concentration during the catalytic cycle. Compound 2 does not react with MeSTol, but MeS(O)Tol was formed when tert-butyl hydroperoxide was added. This suggests that equilibrium lies to the left in this reaction, 2 + MeSTol + L = MeReO(met)L + MeS(O)Tol, and is drawn to the right by a reaction between MeReO(met)L and the hydroperoxide. Triphenyl arsane does not react with 2, but thermodynamic versus kinetic barriers were not resolved.     

Methyloxorhenium(V) complexes with two bidentate ligands: syntheses and reactivity studies

Four new methyloxorhenium(V) complexes were synthesized: MeReO(PA)(2) (1), MeReO(HQ)(2) (2), MeReO(MQ)(2) (3), and MeReO(diphenylphosphinobenzoate)(2) (4) (in which PAH = 2-picolinic acid, HQH = 8-hydroxyquinoline, and MQH = 8-mercaptoquinoline). Although only one geometric structure has been identified crystallographically for 1, 2, and 3, two isomers of 3 and 4 in solution were detected by NMR spectroscopy. These compounds catalyze the sulfoxidation of thioethers by pyridine N-oxides and sulfoxides. The rate law for the reaction between pyridine N-oxides and thioethers, catalyzed by 1, shows a first-order dependence on the concentrations of pyridine N-oxide and 1. The second-order rate constants of a series of para-substituted pyridine N-oxides fall in the range of 0.27-7.5 L mol(-)(1) s(-)(1). Correlation of these rate constants by the Hammett LFER method gave a large negative reaction constant, rho = -5.2. The next and rapid step does not influence the kinetics, but it could be explored with competition experiments carried out with a pair of methyl aryl sulfides, MeSC(6)H(4)-p-Y. The value of each rate was expressed relative to the reference compound that has Y = H. A Hammett analysis of k(Y)/k(H) gave rho = -1.9. Oxygen-18 labeled 1 was used in a single turnover experiment for 4-picoline N-oxide and dimethyl sulfide. No (18)O-labeled DMSO was found. We suggest that the reaction proceeds by way of two intermediates that were not observed during the reaction. The first intermediate contains an opened PA-chelate ring; this allows the pyridine N-oxide to access the primary coordination sphere of rhenium. The second intermediate is a cis-dioxorhenium(VII) species, which the thioether then attacks. Oxygen-18 experiments were used to show that the two oxygens of this intermediate are not equivalent; only the new oxygen is attacked by, and transferred to, SR(2). Water inhibits the reaction because it hydrolyzes the rhenium(VII) intermediate.     

Construction of symmetric and asymmetric Mo/S/Cu clusters from a cluster precursor [Et4N]2[(edt)2Mo2S2(mu-S)2] (edt = ethanedithiolate)

Treatment of [Et 4N] 2[(edt) 2Mo 2S 2(mu-S) 2] ( 1) (edt = ethanedithiolate) with equimolar CuBr afforded an anionic hexanuclear cluster [Et 4N] 2[(edt) 2Mo 2(mu-S) 3(mu 3-S)Cu] 2.2CH 2Cl 2 ( 2.2CH 2Cl 2). On the other hand, reactions of 1 with 2 equiv of CuBr in the presence of 1,2-bis(diphenylphosphino)methane (dppm) and pyridine (Py) ligands gave rise to two neutral tetranuclear clusters [(edt) 2Mo 2O 2(mu-S) 2Cu 2(dppm) 2] ( 3) and [(edt) 2Mo 2O(mu 3-S)(mu-S) 2Cu 2(Py) 4] ( 4), respectively. The reaction of 1 with 2 equiv of CuBr followed by the addition of a mixture of dppm and Py (molar ratio = 1:2) yielded another neutral tetranuclear cluster [(edt) 2Mo 2(mu-S) 2(mu 3-S) 2Cu 2(dppm)(Py)].Py ( 5.Py). Compounds 2- 5 have been characterized by elemental analysis, UV-vis spectra, IR spectra, (1)H NMR, and X-ray analysis. The structure of the dianion of 2 can be viewed as having a [Mo 4S 8Cu 2] core in which two chemically equivalent [Mo 2(mu-S) 3(mu 3-S)(edt) 2Cu] (-) anions are linked by two extra Cu-S edt bonds. The molecular structure of 3 may be visualized as being built of one [(edt) 2Mo 2X 2(mu-S) 2] (2-) dianion and one [Cu 2(dppm) 2] (2+) dication that are connected by a pair of M-mu-S edt bonds. Compound 4 is formed by the affiliation of two Cu(I) atoms only at one end of the [(edt) 2Mo 2S 2(mu-S) 2] moiety, connecting with the S t atoms and the S edt atom. Cluster 5.Py can be viewed as being constructed from the addition of one Cu atom onto the incomplete cubanelike [Mo 2S 4Cu] framework through one terminal sulfur and one edt sulfur. Among the four clusters, 3 and 4 have internal mirror symmetry or pseudo mirror symmetry, respectively, while 2 and 5 are asymmetric clusters with racemic formation.     

Tuning the reactivity in classic low-spin d6 rhenium(I) tricarbonyl radiopharmaceutical synthon by selective bidentate ligand variation (L,L'-Bid; L,L'= N,N', N,O, and O,O' donor atom sets) in fac-[Re(CO)3(L,L'-Bid)(MeOH)]n complexes

A range of fac-[Re(CO)(3)(L,L'-Bid)(H(2)O)](n) (L,L'-Bid = neutral or monoanionic bidentate ligands with varied L,L' donor atoms, N,N', N,O, or O,O': 1,10-phenanthroline, 2,2'-bipydine, 2-picolinate, 2-quinolinate, 2,4-dipicolinate, 2,4-diquinolinate, tribromotropolonate, and hydroxyflavonate; n = 0, +1) has been synthesized and the aqua/methanol substitution has been investigated. The complexes were characterized by UV-vis, IR and NMR spectroscopy and X-ray crystallographic studies of the compounds fac-[Re(CO)(3)(Phen)(H(2)O)]NO(3)·0.5Phen, fac-[Re(CO)(3)(2,4-dQuinH)(H(2)O)]·H(2)O, fac-[Re(CO)(3)(2,4-dQuinH)Py]Py, and fac-[Re(CO)(3)(Flav)(CH(3)OH)]·CH(3)OH are reported. A four order-of-magnitude of activation for the methanol substitution is induced as manifested by the second order rate constants with (N,N'-Bid) < (N,O-Bid) < (O,O'-Bid). Forward and reverse rate and stability constants from slow and stopped-flow UV/vis measurements (k(1), M(-1) s(-1); k(-1), s(-1); K(1), M(-1)) for bromide anions as entering nucleophile are as follows: fac-[Re(CO)(3)(Phen)(MeOH)](+) (50 ± 3) × 10(-3), (5.9 ± 0.3) × 10(-4), 84 ± 7; fac-[Re(CO)(3)(2,4-dPicoH)(MeOH)] (15.7 ± 0.2) × 10(-3), (6.3 ± 0.8) × 10(-4), 25 ± 3; fac-[Re(CO)(3)(TropBr(3))(MeOH)] (7.06 ± 0.04) × 10(-2), (4 ± 1) × 10(-3), 18 ± 4; fac-[Re(CO)(3)(Flav)(MeOH)] 7.2 ± 0.3, 3.17 ± 0.09, 2.5 ± 2. Activation parameters (ΔH(k1)(++), kJmol(-1); ΔS(k1)(), J K(-1) mol(-1)) from Eyring plots for entering nucleophiles as indicated are as follows: fac-[Re(CO)(3)(Phen)(MeOH)](+) iodide 70 ± 1, -35 ± 3; fac-[Re(CO)(3)(2,4-dPico)(MeOH)] bromide 80.8 ± 6, -8 ± 2; fac-[Re(CO)(3)(Flav)(MeOH)] bromide 52 ± 5, -52 ± 15. A dissociative interchange mechanism is proposed.     

Darstellung der Halogeno-Pyridin-Rhenate(III), [ReX6−n (Py)n](3−n)− (X = Br,Cl; n = 1−3), sowie Kristallstrukturen von trans-[(C4H9)4N][ReBr4(Py)2], mer-[ReCl3(Py)3] und mer-[ReBr3(Py)3]

Preparation of Halogeno Pyridine Rhenates(III), [ReX_6?n(Py)_n]^(3?n)? (X = Br, Cl; n = 1?3) Crystal Structures of trans-[(C₄H₉)₄N][ReBr₄(Py)₂], mer-[ReCl₃(Py)₃], and mer- [ReBr₃(Py)₃] The mixed halogeno-pyridine-rhenates(III), [ReX_6?n(Py)_n]^(3?n)? (X = Br, Cl), n = 1?3, have been prepared for the first time by reaction of the tetrabutylammoniumsalts (TBA)₂[ReX₆] (X = Br, Cl) in pyridine with (TBA)BH₄ and separation by chromatography on Al₂O₃. Apart from the monopyridine complexes only the trans and mer isomers are formed from the bis-and tris-pyridine compounds. The X-ray structure determinations of the isotypic neutral complexes mer- [ReX₃(Py)₃] (monoclinic, space group P 2₁/n, Z = 4; for X = Cl: a = 9,1120(8), b = 12,5156(14), c = 15,6100(13) Å, β = 91,385(7)°; for X = Br: a = 9,152(5), b = 12,852(13), c = 15,669(2) Å, β = 90,43(2)°) reveal, due to the stronger trans influence of pyridine compared with Cl and Br, that the Re? X distances in asymmetric Py? Re? X3 axes with ReCl3 = 2,397 Å and ReBr3 = 2,534 Å are elongated by 1,3 and 1% in comparison with symmetric X1? Re? X2 axes with ReCl1 = ReCl2 = 2,367 Å and ReBr1 = 2,513 and ReBr2 = 2,506 Å, respectively. The Re? N bond lengths are roughly equal with 2,12 Å. Trans-(TBA)[ReBr₄(Py)₂] crystallizes triclinic, space group P1 , a = 9,2048(12), b = 12,0792(11), c = 15,525(2) Å, α = 95,239(10), β = 94,193(11), γ = 106,153(9)°, Z = 2. The unit cell contains two independent but very similar complex anions with approximate D_2h(mmm) point symmetry.     

Mononuclear, dinuclear, hexanuclear, and one-dimensional polymeric silver complexes having ligand-supported and unsupported argentophilic interactions stabilized by pincer-like 2,6-bis(5-pyrazolyl)pyridine ligands

The mononuclear complexes [Ag(H2L1)(Py)2](NO3) x H2O (1, H2L1 = 2,6-bis(5-methyl-1H-pyrazol-3-yl)pyridine) and [Ag(NO3)(L()] (2, L2 = 2,6-bis(5-methyl-1-isopropyl-1H-pyrazol-3-yl)pyridine), dinuclear complex [Ag2(H2L3)2(HL4)2] (3, H2L3 = 2,6-bis(5-phenyl-1H-pyrazol-3-yl)pyridine, HL4 = 6-(5-phenyl-1H-pyrazolyl-3-yl)picolinate), one-dimensional polymer {[Ag2(H2L1)2](NO3)2 x H2O}(n) (4), and hexanuclear clusters [Ag6(HL1)4](X)2 (X = NO3-, 5 ; BF4-, 6 ; ClO4-, 7) stabilized by pincer-like bispyrazolyl ligands have been prepared and characterized using (1)H NMR spectroscopy, elemental analysis, IR spectroscopy, luminescence spectroscopy and X-ray diffraction. In complex , there is a ligand unsupported Ag-Ag bond between the two silver atoms. Complex displays a one-dimensional polymer consisting of an infinite Ag-Ag chain and every two adjacent silver ions are bridged by an H2L1 ligand. Complexes and have the same Ag6 cores in which six silver atoms are held together by four HL1 and five Ag-Ag bonds, while complex was held together by six Ag-Ag bonds. The silver-silver distances in these complexes are found in the range of 2.874(1)-3.333(2) A for ligand supported, and 3.040(1) A for ligand unsupported Ag-Ag bonds, respectively. Complexes 3-7 are strongly luminescent due to either intraligand or metal-ligand charge transfer processes.     

A non-radical chain mechanism for oxygen atom transfer with a thiorhenium(V) catalyst

The compound MeRe(S)(mtp)(PPh3), 2, where mtpH2 is 2-(mercaptomethyl)thiophenol, was used to catalyze the reaction between pyridine N-oxides, PyO, and triphenylphosphine. The rate law is -d[PyO]/dt=kc'[2].[PyO](1/2), with kc' at 25.0 degrees C in benzene=0.68 (4-picoline N-oxide) and 3.5x10(-3) dm(3/2) mol(-1/2) s(-1) (4-NO2-pyridine N-oxide). A chain mechanism with three steady-state thiorhenium species as chain carriers is implicated.     

Mechanistic changeover for the water substitution on fac-[(CO)3Re(H2O)3]+ revealed by high-pressure NMR

The complex formation in water between the stable tricarbonyltriaqua fac-[(CO)(3)Re(H(2)O)(3)](+) (1) complex and N- and S-donor ligands has been studied by high-pressure (1)H NMR. Rate and equilibrium constants for the formation of [(CO)(3)Re(Pyz)(H(2)O)(2)](+), [(CO)(3)(H(2)O)(2)Re(mu-Pyz)Re(H(2)O)(2)(CO)(3)](2+), [(CO)(3)Re(THT)(H(2)O)(2)](+), and [(CO)(3)Re(DMS)(n)()(H(2)O)(3-n)](+) (n = 1-3) (Pyz = pyrazine, THT = tetrahydrothiophene, DMS = dimethyl sulfide) have been determined and are in accord with previous results (Salignac, B.; Grundler, P. V.; Cayemittes, S.; Frey, U.; Scopelliti, R.; Merbach, A. E.; Hedinger, R.; Hegetschweiler, K.; Alberto, R.; Prinz, U.; Raabe, G.; K?lle, U.; Hall, S. Inorg. Chem. 2003, 42, 3516). The calculated interchange rate constant k(1)' (Eigen-Wilkins mechanism) increases from the hard O- and N-donors to the soft S-donors, as exemplified by the following series: TFA (trifluoroacetate) (k(1)' = 2.9 x 10(-3) s(-1)) < Br(-) < CH(3)CN < Pyz < THT < DMS < TU (thiourea) (k(1)' = 41.5 x 10(-3) s(-1)). On the other hand, values remain close to that of water exchange k(ex) on 1 (k(ex) = 6.3 x 10(-3) s(-1)). Thus, an I(d) mechanism was assigned, suggesting however the possibility of a slight deviation toward an associatively activated mechanism with the S-donor ligands. Activation volumes determined by high-pressure NMR, for Pyz as Delta V(++)(f,1) = +5.4 +/- 1.5, Delta V(++)(r,1) = +7.9 +/- 1.2 cm(3) mol(-)(1), for THT as Delta V(++)(f,1) = -6.6 +/- 1, Delta V(++)(r,1) = -6.2 +/- 1 cm(3) mol(-1), and for DMS as Delta V(++)(f,1) = -12 +/- 1, Delta V(++)(r,1) = -10 +/- 2 cm(3) mol(-1) revealed the ambivalent character of 1 toward water substitution. Hence, these findings are interpreted as a gradual changeover of the reaction mechanism from a dissociatively activated one (I(d)), with the hard O- and N-donor ligands, to an associatively activated one (I(a)), with the soft S-donor ligands.     

Electrospray ionization tandem mass spectrometric studies of competitive pyridine loss from platinum(II) ethylenediamine complexes by the kinetic method

The competition between pyridine ligand loss in square planar Pt(II) complexes has been examined using the doubly and singly charged ions of complexes consisting of platinum(ethylenediamine) coordinated to two different substituted pyridines. Collision induced dissociation (CID) of [Pt(en)Py(1)Py(2)](2+) (where Py(1) = one of ten different substituted pyridines and Py(2) = pyridine) results in loss of the protonated pyridines to yield the singly charged platinum ions [Pt(en)Py(1)-H](+) and [Pt(en)Py(2)-H](+). In contrast, fragmentation of [Pt(en)Py(1)Py(2)-H](+) results in neutral pyridine loss to yield the ions [Pt(en)Py(1)-H](+) and [Pt(en)Py(2)-H](+). In the latter case, the correlation between relative losses of each pyridine compared to their gas-phase proton affinities is poor. A novel chloride ion abstraction reaction occurs for the fragmentation of [Pt(en)Py(1)Py(2)](2+) when Py(1) = o-C(5)H(4)CIN and Py(2) = C(5)H(5)N, to yield the [Pt(en)(Cl)Py(2)](+) and [o-C(5)H(4)N](+) pair of ions. In order to model this process the competition between nitrogen and chlorine binding in [Pt(NH(3))(3)(o-NC(5)H(4)Cl)](2+) has been examined using density functional theory (DFT) calculations at the B3LYP/LANL2DZ level of theory. Both adducts are minima with the N adduct being more stable than the Cl adduct by 22.7 kcal mol(-1). Furthermore, the Cl adduct exhibits a significant stretching of the C-Cl bond (to 1.935 A), consistent with the observed chloride ion abstraction reaction, which is endothermic by 9.0 kcal mol(-1) (relative to the N adduct).     

Water-exchange study revealed unexpected substitution behavior of [(CO)2(NO)Re(H2O)3]2+ in aqueous media

The pH-dependent water-exchange rates of [(CO)2(NO)Re(H2O(cis))2(H2O(trans))]2+ (1) in aqueous media were investigated by means of 17O NMR spectroscopy at 298 K. Because of the low pK(a) value found for 1 (pK(a) = 1.4 +/- 0.3), the water-exchange rate constant k(obs)(H2O(trans/cis)) was analyzed with a two-pathway model in which k(Re)(H2O(trans/cis)) and k(ReOH)(H2O)(trans/cis)) denote the water-exchange rate constants in trans or cis position to the nitrosyl ligand on 1 and on the monohydroxo species [(CO)2(NO)Re(H2O)2(OH)]+ (2), respectively. Whereas the rate constants k(ReOH)(H2O)(trans)) and k(ReOH)(H2O)(cis)) were determined as (4.2 +/- 2) x 10(-3) s(-1) and (5.8 +/- 2) x 10(-4) s(-1), respectively, k(Re)(H2O)(trans)) and k(Re)(H2O)(cis)) were too small to be determined in the presence of the much more reactive species 2. Apart from the water exchange, an unexpectedly fast C identical with 16O --> C identical withO exchange was also observed via NMR and IR spectroscopy. It was found to proceed through 1 and 2, with rate constants k(Re)(CO) and k(ReOH)(CO) of (19 +/- 4) x 10(-3) s(-1) and (4 +/- 3) x 10(-3) s(-1), respectively. On the other hand, N identical with 16O --> N identical with *O exchange was not observed.     

Kinetics and mechanism of oxygen atom transfer from methyl phenyl sulfoxide to triarylphosphines catalyzed by an oxorhenium(V) dimer

An oxorhenium(V) dimer, [PMeReO(mtp)](2), D, where mtpH(2) is 2-(mercaptomethyl)thiophenol, catalyzes oxygen atom transfer reaction from methyl phenyl sulfoxide to triarylphosphines. Kinetic studies in benzene-d(6) at 23 degrees C indicate that the reaction takes place through the formation of an adduct between D and sulfoxide. The equilibrium constants, K(DL), for adduct formation were determined by spectrophotometric titration, and the values of K(DL) for MeS(O)C(6)H(4)-4-R were obtained as 14.1(2), 5.7(1), and 2.1(1) for R = Me, H, and Br, respectively. Following sulfoxide binding, oxygen atom transfer occurs with either internal or external nucleophilic assistance. Because [MeReO(mtp)](2) is a much more reactive catalyst than its monomerized form, MeReO(mtp)PPh(3), loss of the active catalyst during the time course of the reaction must be taken into account as a part of the kinetic analysis. As it happens, sulfoxide catalyzes monomerization. Monomerization by triarylphosphines was also studied in the presence of sulfoxide, and a mechanism for that reaction was also proposed. Both the phosphine-assisted monomerization and the phosphine-assisted pathway for oxygen atom transfer involve transition states with ternary components, D, sulfoxide, and phosphine, which we suggest are structural isomers of one another.