Vinyl polymerization of acrylonitrile by the Ce(IV)-glucose redox system

Aqueous polymerization of acrylonitrile (M) initiated by the Ce(IV)-glucose (R) redox system has been studied under nitrogen in the temperature range of 30–40 °C. The rate of polymerization (Rp) is proportional to [M]², [R] and inversely proportional to [Ce(IV)]. The rate of ceric ion disappearance is proportional to [R] and [Ce(IV)]. The end group in the polymer is characterised by IR spectra. A suitable kinetic scheme has been proposed and explained in the light of these experimental findings.     

A study on sorbitol-ceric ion initiated polymerization of acrylonitrile

The polymerization of acrylonitrile (M) initiated by the sorbitol (R)-Ce(IV) redox system has been studied in sulphuric acid in the range 30–40° under nitrogen. At moderately high concentrations of Ce(IV) (0.00015-0.02 M), the rate of polymerization (R_p) is proportional to $\text{[}\text{M}\text{]}{}^{\mathrm{<mtext>3</mtext><mtext>2</mtext>}}$ and $\text{[}\text{R}\text{]}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$ and the rate of Ce(IV) disappearance is proportional to [R] and [Ce(IV)]. At lower concentration of Ce(IV) (0.00005–0.00015 M) R_p is proportional to [M], [R]^1/2 and [Ce(IV)]^1/2 and rate of Ce(IV) disappearance is proportional to [R] and [Ce(IV)]. The effects of certain salts, acid, solvent and temperature on both rates have been investigated. A kinetic scheme involving mutual termination has been proposed and various rate and energy parameters evaluated. At still higher concentration of Ce(IV) (0.02 M), a linear mode of termination seems to operate.     

Vinyl polymerization: Kinetics of Ce(IV)–acetophenone-initiated polymerization of acrylonitrile in acetic–sulfuric acid mixtures

The polymerization of acrylonitrile (M) initiated by the Ce(IV)–acetophenone (AP) redox pair has been studied in acetic–sulfuric acid mixtures in a nitrogen atmosphere. The rate of polymerization is proportional to [M]^3/2, [AP]^1/2 and [Ce(IV)]^1/2. The rate of disappearance of ceric ion,–R_Ce, is proportional to [AP], [M], and [Ce(IV)]. The effect of certain salts, solvent, acid and temperature on both the rates have been investigated. A suitable kinetic scheme has been proposed, and the composite rate constants k_p ²(k/k/_t) and k₀/k_i are reported.     

Redox-Initiated Polymerization of Methyl Methacrylate

The redox-initiated polymerization of methyl methacrylate (MMA) by the Ce(IV)-malic acid system has been carried out in aqueous medium under an inert atmosphere. The rate of polymerization was found to be proportional to [MMA]^3/2 [MA]^1/2 [Ce(IV)]^1/2 and the rate of ceric ion disappearance was proportional to [Ce(IV)] but independent of [MMA]. The rate increased linearly up to a certain range of [MA], above which it remained constant. Increasing [H₂SO₄] decreased the rate. The activation energy was found to be 57.44 kJ/mol.     

Aqueous polymerization of acrylamide initiated by cerium (IV)–ethylenediamine tetraacetic acid redox system

Ethylenediamine tetraacetic acid (EDTA) terminated polyacrylamide was obtained by using the EDTA–cerium(IV) ammonium nitrate [Ce(IV)] redox initiator in the aqueous polymerization of acrylamide. The polymerization behaviors as a function of the concentration of Ce(IV), EDTA, and acrylamide as well as temperature were studied. The consumption rate of cerium(IV) depends a first-order reaction on the ceric ion concentration ([Ce(IV)]). The complex formation constant (K) and disproportionation constant (k_d) of Ce(IV)–EDTA chelated complex are 1.67 × 10⁴ and 3.77 × 10^?3, respectively. The rate dependences of polymerization on monomer concentration and EDTA concentration both follow a second-order reaction in the run of initial monomer concentration ([M]_i) equal to 0.2 mol dm^?3. The number average molecular weight increases linearly with the ratio of [M]_i/[Ce(IV)]_i. The mechanism and kinetics for the polymerization was proposed. The kinetic parameters involved were determined. © 1992 John Wiley & Sons, Inc.     

Grafting of Methyl Acrylate onto Cellulose by Ceric Ion

Abstract

Methyl acrylate was grafted onto dissolving pulp by ceric ion in aqueous sulfuric acid under oxygen-free argon. At a low Ce(IV) concentration (up to 1 mmol/L), the rate of polymerization (R_p ) is proportional to [Ce]^0.5 [MA]¹ [cellulose]¹. At higher concentrations of cericion (1–20 mmol/L), R_p is proportional to [Ce]⁰ [M] ^1.5 [cellulose]¹. The mechanism of grafting is consistent with a kinetic scheme involving initiation by primary radicals and termination by growing polymer radicals. Above 20 mmol/L of ceric salt, the data are consistent with the linear termination mode.     

Polymerization of acrylamide with ceric ion–malic acid redox pair

The polymerization of acrylamide (M) in aqueous sulfuric acid medium initiated with ceric ammonium sulfate–malic acid redox pair was investigated at 35 ± 0.2°C under nitrogen atmosphere. The initiation was caused by the free radical generated by the decomposition of the complex formed between ceric ion and malic acid (MA). The rate of monomer disappearance was proportional to the first power of malic acid, ceric ion, and monomer concentrations at lower ceric ion concentrations. However, at higher ceric ion concentrations the rate was independent of [Ce(IV)]. The rate of ceric ion disappearance was proportional to [MA] and [Ce(IV)] but independent of [M] at lower ceric ion concentrations. The activation energy was found to be 57.74 kJ/mol. Sulfuric acid retarded the reaction. Molecular weights increased with increasing [M] and decreasing [Ce(IV)].     

Vinyl Polymerization Initiated by Ceric Ion–Ethyl Cellosolve Redox System in Aqueous Nitric Acid

Abstract

Polymerizations of methyl methacrylate (MMA) and acrylonitrile (AN) were carried out in aqueous nitric acid at 30°C with the redox initiator system ammonium ceric nitrate-ethyl cellosolve (EC). A short induction period was observed as well as the attainment of a limiting conversion for polymerization reactions. The consumption of ceric ion was first order with respect to Ce(IV) concentration in the concentration range (0.2–0.4) × 10^?2 M, and the points at higher and lower concentrations show deviations from a linear fit. The plots of the inverse of pseudo-first-order rate constant for ceric ion consumption, (k ¹)^?1 vs [EC]^?1, gave straight lines for both the monomer systems with nonzero intercepts supporting complex formation between Ce(IV) and EC. The rate of polymerization increases regularly with [Ce(IV)] up to 0.003 M, yielding an order of 0.41, then falls to 0.0055 M and again shows a rise at 0.00645 M for MMA polymerization. For AN polymerization, R _p shows a steep rise with [Ce(IV)] up to 0.001 M, and beyond this concentration R _p shows a regular increase with [Ce(IV)], yielding an order of 0.48. In the presence of constant [NO^? ₃], MMA and AN polymerizations yield orders of 0.36 and 0.58 for [Ce(IV)] variation, respectively. The rates of polymerization increased with an increase in EC and monomer concentrations: only at a higher concentration of EC (0.5 M) was a steep fall in R _p observed for both monomer systems. The orders with respect to EC and monomer for MMA polymerization were 0.19 and 1.6, respectively. The orders with respect to EC and monomer for AN polymerization were 0.2 and 1.5, respectively. A kinetic scheme involving oxidation of EC by Ce(IV) via complex formation, whose decomposition gives rise to a primary radical, initiation, propagation, and termination of the polymeric radicals by biomolecular interaction is proposed. An oxidative termination of primary radicals by Ce(IV) is also included.     

Aqueous polymerization of methyl methacrylate initiated by the redox system Ce(IV)–isopropyl alcohol. Kinetics and molecular weight

Polymerization of methyl methacrylate was carried out in aqueous nitric acid in the temperature range 26–40°C, with the redox initiator system ceric ammonium nitrate–isopropyl alcohol. A short induction period was observed, as well as the attainment of a limiting conversion, and the total ceric ion consumption with reaction time. The reaction orders were 1/2 and 3/2 with respect to the IPA and monomer concentration, respectively, within the range (3–5) × 10^?3M of Ce(IV). But at lower Ce(IV) concentration (≤ 1 × 10^?3M), the order with respect to monomer and Ce(IV) changed to 1 and 1/2, respectively. The rate of ceric ion disappearance was first order with respect to Ce(IV) concentration and (R_Ce)^?1 was proportional to [IPA]^?1. Both the rate of polymerization and the rate of ceric ion consumption increase with rise in temperature. The average-molecular weight can be controlled by variations in IPA, Ce(IV), and monomer concentrations, and in temperature. A kinetic scheme involving oxidation of IPA by Ce(IV) via complex formation, whose decomposition gives rise to a primary radical, initiation, propagation, and termination of the polymeric radicals by bimolecular interaction is proposed. An oxidative termination of primary radicals by Ce(IV) is also included.     

铬(III)离子催化铈(IV)离子氧化四氢糠醇的反应动力学及机理

在酸性介质中用氧化还原滴定法研究了铈(IV)离子在铬(III)离子催化作用下, 于25～40 ℃区间氧化四氢糠醇的反应动力学. 结果表明反应对铈(IV)和四氢糠醇均为一级. 准一级速率常数k_obs随催化剂[Cr(III)]增加而增大, 亦随[H^＋]增加而增大, 而随增加而减小. 在氮气保护下, 反应不能引发丙烯酰胺聚合, 说明在反应中没有自由基产生. 提出了催化剂、底物和氧化剂间生成双核加合物的反应机理. 通过k_obs与的依赖关系, 并结合Ce(IV)在溶液中的平衡, 找到了本反应体系的动力学活性物种是Ce(SO₄)₂. 还计算出一些速率常数及相应的活化参数.     

Vinyl polymerization initiated by ceric ion reducing agent systems in sulfuric acid medium

Polymerization of the monomers, methyl acrylate (MA) and methyl methacrylate (MMA) was carried out in sulfuric acid medium at 15°C. With the redox initiator system, ceric ammonium sulfate–malonic acid. There was no induction period, and a steady state was attained in a short time. There was found to be no polymerization even after 1 hr. in the absence of the reducing agent R. The initiation was by the radical produced from the Ce⁴⁺–malonic acid reaction. The rate of monomer disappearance was proportional to [M]^1.5, [R]^0.5, and [Ce⁴⁺]^0.3–0.5, and the rate of ceric disappearance was directly proportional to [R] and [Ce⁴⁺]. Chain lengths of the polymers were directly proportional to [M] and inversely to [R]^1/2 and [Ce⁴⁺]^1/2. The experimental results were explained by a kinetic scheme involving the following steps: (a) oxidation of the substrate to give the primary radical which reacts with Ce⁴⁺ to give the products, (b) initiation by the primary radical, (c) propagation, and (d) termination of the growing polymer radicals by the mutual type. For the polymerization of acrylonitrile (AN) by the redox system, ceric ammonium sulfate–cyclohexanone (CH), in sulfuric acid at 15°C., the scheme was modified to include linear type of termination by Ce⁴⁺, along with the mutual termination to explain the results especially under conditions with [Ce⁴⁺] ≥ [CH].     

Kinetics of Aqueous Polymerization of Acrylamide Initiated by Ceric Ammonium Sulfate/2-Mercaptoethanol Redox System

Polymerization of acrylamide monomer, initiated by the redox system involving acidified ceric ammonium sulfate and 2-mercaptoethanol (2-ME) was carried out in an aqueous medium at 25° C. White, rigid polyacrylamide, isolated under controlled experimental conditions, showed a molecular weight of 1.5 × 10⁴ from viscosity measurements. The rate of monomer (M) conversion to polymer was found to be proportional to [M]^1.5, [2-ME]^0.5, and [Ce(IV)]^0.4. Further, the rate of disappearance of ceric ion was observed to be directly proportional to [2-ME] and independent of [M] in the range of 0.16–0.48 mole/liter. The explanation of the above proportionalities is given in terms of a proposed reaction mechanism. Values of the usual rate constants, k_r, k₀/k_t and k_t./k_p ^½ have been computed.     

Polymerization of acrylonitrile initiated by ceric ion-organic sulphur compounds reducing agent systems

Polymerization of acrylonitrile was investigated using ceric ion-organic sulfur compounds reducing agent systems. The organic sulphur compounds used as the reductants are, thiourea, thioacetamide, 2-amino ethanethiol, cysteine, and thioglycolic acid. The rates of polymerization were measured within the temperature range of 25 to 40 °C. The initiation was by the radical produced from Ce⁴⁺-sulphur compounds reaction. The rate of monomer disappearance was proportional to [M]^1.5, [S]^0.5 and the rate of ceric disappearance was directly proportional to [S] and [Ce⁴⁺]. A kinetic scheme involving the initiation by the primary radical and termination of the growing polymer radicals by the mutual type has been suggested and the kinetic percentage have been evaluated.     

Redox-Initiated Polymerization of Vinyl Monomers with Cu(II)=Cyclohexanone System in Acetonitrile Medium. A Kinetic Study

The kinetics of the oxidation of cyclohexanone (CHN) by hydrated copper(II) perchlorate (HCP) in an acetonitrile medium has been studied. The orders with respect to [CHN] and [HCP] were found to be one each. This HCP + CHN redox system has been used for the polymerization of acrylonitrile, methyl methacrylate, and methyl acrylate. The rate of polymerization was proportional to [CHN]^0.5, [HCP]^0.5, and [M]^1.8. Based on the above results, a probable mechanism for oxidation and polymerization is proposed.     

Synthesis and characterization of a novel water-soluble mid-chain macrophotoinitiator of polyacrylamide by Ce(IV)/HNO3 redox system

A new water-soluble mid-chain macrophotoinitiator of polyacrylamide (PAAm) has been synthesized by redox polymerization. The polymerization of acrylamide (AAm) initiated by dihydroxy functional photoinitiator namely, 2-hydroxy-1-[4-(2-hydroxyethoxy)phenyl]-2-methyl propan-1-one (HE-HMPP), Irgacure 2959, in combination with cerium(IV) ammonium nitrate has been investigated in aqueous nitric acid. The effects of HE-HMPP, AAm, and Ce(IV) concentrations on the polymerization rate were investigated. The photodegradation and IR, ¹H NMR, UV, and fluorescence spectroscopic studies revealed that polyacrylamide with desired photoinitiator functionality in the middle of the chain were obtained. This prepolymer was used in photoinduced free radical polymerization of methyl methacrylate (MMA) to produce PAAm-PMMA block copolymer.     

Precipitation polymerization of acrylamide using vazo-33 as an initiator and acetonitrile/water mixtures as the solvent

Precipitation polymerization of acrylamide initiated by a thermal initiator, Vazo-33 (DuPont Vazo Initiator), was achieved at a solvent composition of acetonitrile/water = 4/6 (vol/vol). The polymerization kinetics were investigated in the acrylamide [M] concentration range 0.86–2.27M, Vazo-33 [I] concentration range 1.4–11.0 × 10^?4M, and temperature range 30–40°C. Polymerization was carried out in reaction ampules and the rate was determined gravimetrically. Number-average molecular weight was obtained from intrinsic viscosity. The precipitation polymerization rate varied as [M]^2.16 and [I]^0.44. Number-average molecular weight was proportional to [M]^1.22 and inversely proportional to [I]^0.31. The overall reaction activation energy was calculated as 17.3 kcal/mol in the temperature range studied. The optimal reaction conditions studied were: acetonitrile/water = 4/6, temperature = 40°C, [M] = 1.95M and [I] = 2.8 × 10^?4M. One hundred percent conversion was achieved in 90 min and a polymer with a number-average molecular weight of 1,200,000 was obtained.     

Polymerization of acrylamide initiated by Ce4+/L-cysteine redox system

Summary The polymerization of acrylamide initiated by Ce 4⁴⁺/L-cysteine redox system has been studied at 35 ± 0.2 °C in dark under nitrogen atmosphere. The effect of monomer,L-cysteine, Ce⁴⁺ and sulphuric acid concentration and temperature on the rate of polymerization has been studied. The rate may be expressed by the following equation:R _p [M] [Ce⁴⁺]^0.5 [Cysteine]^0.44 The overall energy of activation is 4.78 kcal/deg/mole in the investigated range of temperature 30–50 °C. Molecular weight of the polymer is independent of catalyst concentration but increases with increasing monomer concentration.     

A kinetic and mechanistic study on the silver (I)-catalyzed oxidation of l-alanine by cerium (IV) in sulfuric acid medium

The kinetics and mechanism of Ag(I)-catalyzed oxidation of l-alanine by cerium (IV) in sulfuric acid media have been investigated by titrimetric technique of redox in the temperature range of 298–313 K. It is found that the reaction is of first order with respect to Ce(IV) and l-alanine, and it is of a positive fractional order with respect to Ag(I). It is found that the pseudo first order ([l-alanine] ? [Ce(IV)] ? [Ag(I)]) rate constant k′ increases with the increase of[H⁺]. The major oxidation product of alanine has been identified as acetaldehyde by an ¹H NMR and IR spectroscopy. Under the experimental conditions, the kinetically active species has been found to be Ce⁴⁺. Under nitrogen atmosphere, the reaction system can initiate the polymerization of acrylonitrile, indicating generation of free radicals. On the basis of the experimental results, a suitable mechanism has been proposed. The rate constants of the rate-determining step together with the activation parameters were evaluated.     

Polymerization of acrylamide initiated by the Ce4+/thiourea redox system

The polymerization of acrylamide (M) initiated by the Ce⁴⁺/thiourea (TU) redox system has been studied in an aqueous sulfuric acid medium at 35 ± 0.2°C under nitrogen atmosphere. The rate of polymerization is governed by the expression The activation energy is 5.9 kcal deg^?1 mol^?1 in the investigated temperature range 30–50°C. The molecular weight is directly proportional to the concentration of monomer and inversely proportional to the catalyst concentration. With increasing concentration of DMF molecular weight decreases. The range of concentrations for which these observations hold at sulfuric acid concentration of 2.5 × 10^?2 mol/L are [monomer] = 5.0 × 10^?2–3.0 × 10^?1, [catalyst] = (5.0–15.0) × 10^?4, and [activator] = (1.0–6.0) × 10^?3 mol/L.     

Kinetics of the oxidation of acrylic acid by ce(IV) in acid perchlorate solution

The kinetics of oxidation of acrylic acid by Ce(IV)-perchlorate in perchloric acid were studied by following the rate of dissappearance of Ce(IV). The reaction order was zero with respect of Ce(IV) and unity with the acrylic acid. The addition of [H⁺] shows a proton catalysis and no salt effect is observed. Spectrophotometric studies do not reveal the formation of intermediate complex and thus a mechanism postulating the hydrolysis of the acid is suggested which undergoes first oxidation by the reactive species of Ce(IV). Thermodynamic parameters have also been calculated.