Relationship between the volume phase transition and the surface area of poly (N-isopropylacrylamide) and poly (N-isopropylacrylamide-co-sodium methacrylate) hydrogels

The volume phase transition of poly(N-isopropylacrylamide) (PNIPAAm) and poly(N-isopropylacrylamide-co-sodium methacrylate) (P(NIPAAm-co-SMA)) hydrogels was investigated with consideration of the pore characteristics. The volume phase transition temperature of the hydrogel increased by incorporating sodium methacrylate (SMA). Based on the BET equation, the surface area was evaluated by a gas adsorption method. The surface area of PNIPAAm and P(NIPAAm-co-SMA) hydrogels decreased with increasing temperature, resulting from the fact that the depth and the size of pores decreased significantly in the course of the volume phase transition. Hence, it is suggested that the change of surface area has a close relationship with the volume phase transition of PNIPAAm and P(NIPAAm-co-SMA) hydrogels.     

Study on novel hydrogels based on thermosensitive PNIPAAm with pH sensitive PDMAEMA grafts

A series of novel hydrogels based on poly(N-isopropylacrylamide) (PNIPAAm) with pendant poly(N-(2-(dimethylamino) ethyl)-methacrylamide) (PDMAEMA) grafts were designed and synthesized. The influence of the pendant PDMAEMA grafts on the properties of the resulted hydrogels was examined in terms of morphology observed by scanning electron microscopy (SEM), thermal property characterized by differential scanning calorimetry (DSC) and shrinking/swelling kinetics upon external temperature changes. In comparison with the conventional PNIPAAm hydrogels, resulting hydrogels presented favorable pH sensitivity as well as improved thermosensitive properties, including enlarged water containing capability at room temperature and faster shrinking/swelling rate upon heating. In addition, fish DNA, used as a model drug, was loaded into the hydrogels, and the controlled release behavior of the drug-loaded hydrogels at different temperatures (22 and 37 °C) was further studied.     

Synthesis and Characterization of Hydrogels Based on Gamma Radiation Copolymerization of N‐isopropylacrylamide and Ethylene Glycol Dimethacrylate Monomers

Hydrogels based essentially on N‐isopropylacrylamide (NIPAAm) and different ratios of ethylene glycol dimethacrylate (EGDMA) monomer were synthesized by gamma radiation copolymerization. The thermal decomposition behavior of NIPAAm/EGDMA hydrogels was determined by thermogravimetric analysis (TGA). The effect of temperature and pH on the swelling behavior was also studied. The results showed that the ratio of EGDMA in the comonomer feeding solution has a great effect on the yield product, gel fraction and water content in the final hydrogel. In this regard, it was observed that the increase of EGDMA ratio decreased these properties. The TGA study showed that all the compositions of NIPAAm/EGDMA hydrogels displayed higher thermal stability than the hydrogel based on pure PNIPAAm hydrogel. The swelling kinetics in water showed that pure PNIPAAm and NIPAAm/EGDMA hydrogels reached equilibrium after 6 h. However, NIPAAm/EGDMA hydrogels show swelling in water lower than pure PNIPAAm. The results showed that the swelling character of pure PNIPAAm and NIPAAm/EGDMA hydrogels was affected by the change in temperature within the temperature range 25–40°C, and showed a reversible change in swelling in the pH range 4–7 depending on composition.     

Effect of the crosslinking level on the properties of temperature‐sensitive poly(N‐isopropylacrylamide) hydrogels

In this study, the effect of the level of crosslinking on the properties of poly(N‐isopropylacrylamide) (PNIPAAm) hydrogels was investigated in terms of their lower critical solution temperature (LCST), interior morphology, equilibrium swelling, and deswelling and swelling kinetics. The thermal analysis showed that PNIPAAm hydrogels, having a wide range of crosslinking levels, exhibited almost the same LCSTs, and this was different from what the conventional theory would have predicted. Scanning electron micrographs revealed that the interior network structure of the PNIPAAm matrix became more porous with an increase in the level of crosslinking. This more porous matrix provided numerous water channels for water diffusion in or out of the matrix and, therefore, an improved response rate to the external temperature changes during the deswelling process and the swelling process. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 582–593, 2003     

Anticancer drug release from poly(N-isopropylacrylamide/itaconic acid) copolymeric hydrogels

The drug uptake and release of anticancer drug from N-isopropylacrylamide/itaconic acid copolymeric hydrogels containing 0–3 mol% of itaconic acid irradiated at 48 kGy have been investigated. 5-Fluorouracil (5-FU) is used as a model anticancer drug. The effect of 5-FU solution on swelling characteristics of PNIPAAm and P(NIPAAm/IA) copolymeric hydrogels have also been studied. The percent swelling, equilibrium swelling, equilibrium water/5-FU content and diffusion constant values are evaluated for poly(N-isopropylacrylamide) (PNIPAAm) and poly(N-isopropylacrylamide/itaconic) (P(NIPAAm/IA)) hydrogels at 130 ppm of 5-FU solution at room temperature. Diffusion of 5-FU solution into the hydrogels has been found to be the non-Fickian type. Finally, the kinetics of drug release from the hydrogels are examined.     

聚丙烯酰胺/聚异丙基丙烯酰胺互穿网络水凝胶的制备与性能

采用分步法用电子加速器辐射合成了聚丙烯酰胺(PAAm)/聚异丙基丙烯酰胺(PNIPAAm)互穿网络水凝胶,并考察了温度、pH值、离子强度对其溶胀性能的影响.研究表明:互穿水凝胶具有温度敏感性,且其体积相变与互穿网络中PAAm和PNIPAAm含量有关,随着网络中PAAm含量的增加水凝胶的体积相变趋于平缓,可以通过改变PAAm和PNIPAAm的组成比来控制水凝胶的体积相变行为.此外,互穿水凝胶还具有pH敏感性和一定的抗盐性.     

Dual thermo‐ and pH‐sensitive network‐grafted hydrogels formed by macrocrosslinker as drug delivery system

Dual thermo‐ and pH‐sensitive network‐grafted hydrogels made of poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) network and poly(N‐isopropylacrylamide) (PNIPAM) grafting chains were successfully synthesized by the combination of atom transfer radical polymerization (ATRP), reversible addition‐fragmentation chain transfer (RAFT) polymerization, and click chemistry. PNIPAM having two azide groups at one chain end [PNIPAM‐(N₃)₂] was prepared with an azide‐capped ATRP initiator of N,N‐di(β‐azidoethyl) 2‐chloropropionylamide. Alkyne‐pending poly(N,N‐dimethylaminoethyl methacrylate‐co‐propargyl acrylate) [P(DMAEMA‐co‐ProA)] was obtained through RAFT copolymerization using dibenzyltrithiocarbonate as chain transfer agent. The subsequent click reaction led to the formation of the network‐grafted hydrogels. The influences of the chemical composition of P(DMAEMA‐co‐ProA) on the properties of the hydrogels were investigated in terms of morphology and swelling/deswelling kinetics. The dual stimulus‐sensitive hydrogels exhibited fast response, high swelling ratio, and reproducible swelling/deswelling cycles under different temperatures and pH values. The uptake and release of ceftriaxone sodium by these hydrogels showed both thermal and pH dependence, suggesting the feasibility of these hydrogels as thermo‐ and pH‐dependent drug release devices. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Adsorption of Apollo reactive dyes on poly(N,N dimethylamino ethylmethacrylate) hydrogels

Poly(N,N-dimethylamino ethylmethacrylate) [P(DMAEMA)] hydrogels were prepared by irradiating the ternary mixtures of dimethylamino ethylmethacrylate (DMAEMA)/ethyleneglycol dimethacrylate (EGDMA)/water (H₂O) by γ-rays at ambient temperature. The swelling of four types of DMAEMA hydrogels in distilled water is higher than the swelling of these hydrogels in dye solutions. The value of equilibrium swelling of P(DMAEMA)1 hydrogel was 338% at pH 7.0 in distilled water, while it was 325% and 326% at pH 7.0 in Apollofix Red (AR) and Apollofix Yellow (AY) solutions, respectively. The adsorption capacity of P(DMAEMA)1 hydrogel was found to increase from 85 to 131 mg for AR g⁻¹ dry gel and from 58 to 111 mg for AY g⁻¹ dry gel with decreasing pH of the dye solutions.     

交联聚(N-异丙基丙烯酰胺)/(海藻酸钠/聚(N-异丙基丙烯酰胺))半互穿网络水凝胶的制备及其溶胀性能

将线性聚(N-异丙基丙烯酰胺)(PNIPAAm)和海藻酸钠(SA)分子同时引入到PNIPAAm凝胶中,制备了交联聚(N-异丙基丙烯酰胺)/(海藻酸钠/聚(N-异丙基丙烯酰胺))半互穿网络(Cr-PNIPAAm/(SA/PNIPAAm)semi-IPN)水凝胶。在弱碱性条件下(pH=7.4),改变SA与线性PNIPAAm的质量比对Cr-PNIPAAm/(SA/PNIPAAm)semi-IPN水凝胶的溶胀度没有太大的影响。在酸性条件下(pH=1.0),其溶胀度随着SA与线性PNIPAAm质量比的减小而增大。由于亲水性SA与线性PNIPAAm的协同作用,Cr-PNIPAAm/(SA/PNIPAAm)semi-IPN水凝胶的消溶胀速率得到很大提高。     

Using hydrophobic additive as pore‐forming agent to prepare macroporous PNIPAAm hydrogels

Hydrophobic poly(lactic acid) nanospheres were fabricated and used as an additive during the polymerization and gelation process of temperature‐sensitive poly(N‐isopropylacrylamide) (PNIPAAm) hydrogels. The influence of hydrophobic additive on properties of PNIPAAm hydrogels was examined. The interior morphology studied by scanning electron microscopy revealed that the hydrophobic additive induced a macroporous structure in the resulting PNIPAAm hydrogels. Results demonstrate that the hydrophobic additive acts as a pore‐forming agent like conventionally used hydrophilic additive does during the gelation process. Because of the macroporous network and incorporated additives, the temperature‐sensitive characteristics, particularly the equilibrium swelling ratio at room temperature and shrinking rate upon temperature increase of modified PNIPAAm hydrogels, are significantly improved. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5490–5497, 2005     

Fabrication of novel temperature and pH sensitive poly (N-isopropylmaleamic acid-co-acrylonitrile) hydrogels

To combine temperature and pH sensitive capabilities, N-isopropylmaleamic acid (NIPMMA), having isopropylamide group and weakly acidic group (–COOH), was synthesized and used as a precursor for fabrication of temperature and pH sensitive hydrogels. In this paper, a new class of intelligent hydrogel with pH and temperature sensitivity originated from only one precursor (NIPMMA) was designed and demonstrated. Resultant poly(NIPMMA-co-acrylonitrile) [P(NIPMMA-co-AN)] hydrogels were characterized by Fourier transform infrared spectroscopy for structural determination and scanning electron microscope for morphology observation. Their temperature and pH sensitive behaviors were also examined in detail. The data obtained exhibited that the magnitude of sensitive properties of P(NIPMMA-co-AN) hydrogels depended on the composition ratio of two precursors. By increasing the content of NIPMMA, the temperature and pH sensitive capabilities of P(NIPMMA-co-AN) hydrogels were improved correspondingly since AN has no sensitivity upon temperature or pH changes.     

Preparation and characterization of a novel IPN hydrogel memberane of poly(N-isopropylacrylamide)/carboxymethyl chitosan (PNIPAAM/CMCS)

A novel type of interpenetrating polymer networks (IPN) hydrogel membrane of poly(N-isopropylacrylamide)/carboxymethyl chitosan (PNIPAAm)/(CMCS) was prepared, and the effects of the feed ratio of components, swelling medium and irradiation dose on the swelling and deswelling properties of the hydrogel was systematically studied. The results showed that the introduction of CMCS did not shift the LCST (at 32 °C), which is similar to the pure PNIPAAm. The lowest swelling ratio was at pH 2. There was little influence of irradiation dose on the thermo- and pH-sensitivity of the IPN hydrogel, increasing dose only decreased the swelling ratio. The PNIPAAm:CMCS=1:4 w/w hydrogel was not thermo-sensitive in distilled water, whereas it showed a discontinuous volume phase transition in pH 2 and a continuous one in pH 8 buffer. Consequently, a combination of pH and temperature can be coupled to control the responsive behavior of these hydrogels.     

EFFECT OF MOLECULAR WEIGHT OF PEO ON THE STRUCTURE AND PROPERTIES OF PDMAEMA/PEO HYDROGELS

A new kind of binary hydrogels composed of poly(dimethylaminoethylmethacrylate) (PDMAEMA) and poly(ethylene oxide) (PEO) with varying weight average molecular weights ((M)w = 5 × 104, 1 × 105 and 2.5 × 106) were prepared by y-irradiation technology. The properties of PDMAEMA/PEO hydrogels obtained were evaluated in terms of gel fraction, gel strength, thermal characterization and swelling behavior. The gel strength and swelling degree of the hydrogels could be improved obviously after adding PEO into the PDMAEMA system, while the degree of improvement decreased with increasing (M)w of PEO. The temperature sensitivity of PDMAEMA/PEO was retained only in the sample with PEO of (M)w = 5 × 104, and the pH sensitivity was retained in samples with PEO of (M)w = 5 × 104 and 1 × 105. When DMAEMA/PEO mixtures containing PEO of (M)w = 5 × 104 were irradiated, the main reaction could be the cross-linking of DMAEMA, and the linear PEO molecular chains could penetrate into the cross-linked network of PDMAEMA. With increasing Mw of PEO, some side reactions were induced, such as grafting of DMAEMA onto PEO molecules, the scission or cross-linking of PEO.     

Novel poly(N‐isopropylacrylamide)/clay/poly(acrylamide) IPN hydrogels with the response rate and drug release controlled by clay content

Novel interpenetrating network (IPN) hydrogels (PNIPAAm/clay/PAAm hydrogels) based on poly(N‐isopropylacrylamide) (PNIPAAm) crosslinked by inorganic clay and poly(acrylamide) (PAAm) crosslinked by organic crosslinker were prepared in situ by ultraviolet (UV) irradiation polymerization. The effects of clay content on temperature dependence of equilibrium swelling ratio, deswelling behavior, thermal behavior, and the interior morphology of resultant IPN hydrogels were investigated with the help of Fourier transform infrared spectroscopy, differential scanning calorimeter (DSC), scanning electron microscope (SEM). Study on temperature dependence of equilibrium swelling ratio showed that all IPN hydrogels exhibited temperature‐sensitivity. DSC further revealed that the temperature‐sensitivity was weakened with increasing amount of clay. Study on deswelling behavior revealed that IPN hydrogels had much faster response rate when comparing with PNIPAAm/clay hydrogels, and the response rate of IPN hydrogels could be controlled by clay content. SEM revealed that there existed difference in the interior morphology of IPN hydrogels between 20 [below lower critical solution temperature (LCST)] and 50 °C (above LCST), and this difference would become obvious with a decrease in clay content. For the standpoint of applications, oscillating swelling/deswelling behavior was investigated to determine whether properties of IPN hydrogels would be stable for potential applications. Bovine serum albumin (BSA) was used as model drug for in vitro experiment, the release data suggested that the controlled drug release could be achieved by modulating clay content. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 96–106, 2009     

Fast responsive poly(N-isopropylacrylamide) hydrogels prepared in phenol aqueous solutions

Fast responsive poly(N-isopropylacrylamide) (PNIPAAm) hydrogels with improved properties were prepared in phenol aqueous solutions with different concentrations. Due to the expanded network structure in water, the resulted hydrogels are capable of absorbing a large amount of water, i.e. exhibits a much increased swelling ratio at room temperature. Importantly, the hydrogels demonstrated much faster response rate than that of traditional PNIPAAm hydrogel upon external temperature increase.     

Synthesis and characterization of temperature-sensitive and biodegradable hydrogel based on N-isopropylacrylamide

Based on a biodegradable cross-linker, N-maleyl chitosan (N-MACH), a series of Poly(N-isopropylacrylamide) (PNIPAAm) and Poly(N-isopropylacrylamide-co-acrylamide) [P(NIPAAm-co-Am)] hydrogels were prepared, and their lower critical solution temperature (LCST), swelling kinetics, equilibrium swelling ratio in NaCl solution, and enzymatic degradation behavior in simulated gastric fluids (SGF) were discussed. The LCST did not change with different cross-linker contents. By altering the NIPAAm/Am molar ratio of P(NIPAAm-co-Am) hydrogels, the LCST could be increased to 39°C. The LCST of the hydrogel was significantly influenced by the monomer ratio of the NIPAAm/Am but not by the cross-linker content. In the swelling kinetics, all the dry hydrogels exhibited fast swelling behavior, and the swelling ratios were influenced by the cross-linker content and NIPAAm/Am molar ratios. Equilibrium swelling ratio of all the hydrogels decreased with increasing NaCl solution concentration. In enzymatic degradation tests, the weight loss of hydrogels was dependent on the cross-linker contents and the enzyme concentration.      

A novel method to prepare temperature/pH‐sensitive poly(N,N‐diethylacrylamide‐co‐acrylic acid) hydrogels with rapid swelling/deswelling behaviors

Fast responsive temperature‐ and pH‐sensitive hydrogels of poly(N,N‐diethylacrylamide‐co‐acrylic acid) (P(DEA‐co‐AA)) have been synthesized successfully by a two‐step procedure, in which the initial polymerization was conducted at constant temperature for 15 min, followed by further polymerization at ?30°C for 12 hr. Swelling studies showed that hydrogels thus prepared had almost the same temperature and pH sensitivity compared with the conventional ones (polymerized at 24°C for 12 hr). However, hydrogels thus prepared had faster swelling/deswelling rates in distilled water than the conventional ones, and their deswelling rates in low pH buffer solutions were also faster than the conventional ones. These improved properties were attributed to the porous network structure, which was confirmed by the results of scanning electron microscopy. Copyright © 2009 John Wiley & Sons, Ltd.     

“Click” chemistry for in situ formation of thermoresponsive P(NIPAAm‐co‐HEMA)‐based hydrogels

The strategy for in situ chemical gelation of poly(N‐isopropylacrylamide‐co‐hydroxylethyl methacrylate) [P(NIPAAm‐co‐HEMA)]‐based polymers was demonstrated. Two types of new P(NIPAAm‐co‐HEMA) derivatives with alkyne and azide pendant groups, respectively, were prepared. When the solutions of the two derivatives were mixed together, a crosslinking reaction, a type of Huisgen's 1,3‐dipolar azide‐alkyne cycloaddition, in the presence of Cu(I) catalyst occurs. The morphology, equilibrium swelling ratio, swelling kinetics, and temperature response kinetics of the in situ gelated hydrogels were studied. In comparison with the conventional PNIPAAm hydrogel, because of the spatial hindrance of polymeric chains, the resulted hydrogels had a macroporous structure as well as a fast shrinking rate. The strategy described here presents a potential alternative to the traditional synthesis techniques for the in situ formation of thermoresponsive hydrogels. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5263–5277, 2008     

Radiation synthesis and characterization of poly(N,N-dimethylaminoethyl methacrylate-co-N-vinyl 2-pyrrolidone) hydrogels

In this study, radiation synthesis and characterization of swelling behavior and network structure of poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA), and poly(N,N-dimethylaminoethyl methacrylate-co-N-vinyl 2-pyrrolidone) (P(DMAEMA-co-VP)), hydrogels were investigated. PDMAEMA and P(DMAEMA-co-VP) hydrogels in the rod forms were prepared by irradiating the ternary mixtures of DMAEMA/VP/cross-linking agent, ethyleneglycol dimethacrylate (EGDMA), by gamma rays at ambient temperature. In composition ranges where the three components were completely miscible, water was also added to the ternary mixture to provide the formation of homogeneous polymerization and gelation. The influence of irradiation dose, comonomer, VP, and cross-linking agent, EGDMA, content on the total percentage gelation and monomer conversion were investigated. The effect of pH and temperature on the swelling behavior of hydrogels have also been examined. Hydrogels showed typical pH response and temperature responses, such as low-pH and low temperature swelling and high-pH and high temperature deswelling. Polymer-solvent interaction parameter (χ) and enthalpy and entropy changes appearing in the χ parameter for the P(DMAEMA-co-VP)-water system were determined by using Flory-Rehner theory of swelling equilibrium. The negative values for ΔH and ΔS indicate that prepared pure PDMAEMA and P(DMAEMA-co-VP) hydrogels have lower critical solution temperature (LCST) and Flory-Rehner theory of swelling equilibrium provides a satisfactory agreement to the experimental swelling data of the hydrogels.     

Reducibly degradable hydrogels of PNIPAM and PDMAEMA: Synthesis,stimulus‐response and drug release

Reducibly degradable hydrogels of poly(N‐isopropylacrylamide) (PNIPAM) and poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) were synthesized by the combination of reversible addition‐fragmentation chain transfer (RAFT) polymerization and click chemistry. The alkyne‐pending copolymer of PNIPAM or PDMAEMA was obtained through RAFT copolymerization of propargyl acrylate with NIPAM or DMAEMA. Bis‐2‐azidyl‐isobutyrylamide of cystamine (AIBCy) was used as the crosslinking reagent to prepare reducibly degradable hydrogels by click chemistry. The hydrogels exhibited temperature or pH stimulus‐responsive behavior in water, with rapid response, high swelling ratio, and reproducible swelling/shrinkage cycles. The loading and release of ceftriaxone sodium proved the feasibility of the hydrogels as the stimulus‐responsive drug delivery system. Furthermore, the presence of disulfide linkage in AIBCy favored the degradation of hydrogels in the reductive environment. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3604–3612, 2010