Catalytic cyclopropanation of spiro[2.4]hepta-4,6-diene with diazomethane

Catalytic cyclopropanation of spiro[2.4]hepta-4,6-diene with diazomethane in the presence of copper or palladium compounds results in mono- and dicyclopropanation products, namely, spiro[bicyclo[3.1.0]hex-3-ene-2,1′-cyclopropane] and spiro[cyclopropane-1,5′-tricyclo[4.1.0.0^2,4]heptane], with different efficiency. The use of Pd compounds as catalysts allows the cyclopropanation to be performed under conditions of simultaneous generation and decomposition of diazomethane.     

Reaction of bicyclo[2.2.1]hepta-2,5-diene with the arenesulfenamide—phosphorus(v) oxohalide system: chemo-, regio-, and steroselectivity

The chemo-, regio- and stereoselectivities of electrophilic sulfenylation of bicyclo[2.2.1]hepta-2,5-diene with arenesulfenamides activated by phosphorus(v) oxohalides were studied. The ratio of the products of endo- to exo-attack of the diene by the electrophilic species depends on the solvent nature. The proportions of the products formed upon addition to one double bond and upon homoallylic participation of the second double bond depend on solvent polarity, the nature of the halogen, the substituents in the sulfenamide benzene ring, and on the reaction time. In addition, the formation of mixed adducts was proven for the reaction carried out in acetonitrile and the formation of disulfenylation products was found in the reaction with excess sulfenylating reagent. Isomerization of exo-3-arylthio-endo-2-halobicyclo[2.2.1]hept-5-enes to the products formed with homoallylic participation of the second double bond, exo-5-arylthio-endo-3-halotricyclo[2.2.1.0^2,6]heptanes, was shown to be possible.     

Thermodynamic properties of an alternating copolymer of bicyclo[2.2.1]hepta-2,5-diene and carbon monoxide in a region from <Emphasis Type="Italic">T</Emphasis> → 0 to 550 K

The temperature dependence of the heat capacity of an alternating copolymer of bicyclo[2.2.1]hepta-2,5-diene and carbon monoxide in the temperature range 6–550 K (with an error of 0.2–0.5% at 6–350 K and 0.5–1.5% at 330–550 K) was studied by the adiabatic vacuum and dynamic calorimetry. Physical transformations of the copolymer in the studied temperature region were identified, and their thermodynamic characteristics were determined. The combustion energy of the copolymer at 298.15 K was measured in a calorimeter with a static bomb and isothermal jacket. The thermodynamic functions for a region of 0–550 K, enthalpy of combustion, and thermodynamic parameters of copolymer formation from simple substances at T = 298.15 K and p = 101.325 kPa were calculated from the obtained experimental data. The new results and earlier published data were used for the calculation of the thermodynamic characteristics of the alternate copolymerization of bicyclo[2.2.1]hepta-2,5-diene and CO under standard pressure for a region of 0–350 K for the bulk reaction. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1483–1487, June, 2005.     

Photochemical isomerization of 1,2,5-trisilabicyclo[3.2.0]hepta-3,6-diene to 1,4,7-trisilabicyclo[2.2.1]hepta-2,5-diene

Upon irradiation of a benzene-d6 solution of 1,2,2,5-tetrakis[di-tert-butyl(methyl)silyl]-4,7-diaryl- 1,2,5-trisilabicyclo-[3.2.0]hepta-3,6-diene [1a: aryl = phenyl, b: aryl = 3,5-bis-(trimethylsilyl)phenyl], 1,4,7,7-tetrakis[di-tert-butyl-(methyl)silyl]-2,5-diaryl-1,4,7- trisilabicyclo[2.2.1]hepta-2,5-diene (2a,b) was formed via skeletal rearrangement.     

Addition of dichlorocarbene to tricyclo[4.3.0.03,7]nona-4,8-diene

Addition of dichlorocarbene to tricyclo[4.3.0.0^3,7]nona-4,8-diene (brexadiene) under conditions of phase transfer catalysis occurs from theexo side. Cyclopropyl-allyl rearrangement of intermediate chlorocyclopropanes yields tricyclo[5.4.0.0^3,8]undecadienes. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1494–1497, August, 1997.     

Ring-opening reactions of spiro[2.4]hepta-4,6-diene and spiro[4.4]nona-1,3-diene induced by tungsten(0) carbonyls

Tungsten(0) carbonyls react with the strained spiro[2.4]hepta-4,6-diene and the less strained spiro[4.4]nona-1,3-diene with CC bond cleavage and formation of stable alkylene bridged π-cyclopentadienyl-σ-alkyl complexes. The product containing a two carbon bridge has the same unusual spectroscopic properties as the analogous molybdenum complex.     

Some reactions of 1,2,3,4,7,7-hexafluorobicyclo[2,2,1]hepta-2,5-diene: Thermolysis and attack by methoxide ion and by bistrifluoromethyl nitroxide

1,2,3,4,7,7-Hexafluorobicyclo[2,2,1]hepta-2,5-diene gave 1,2,3,4-tetrafluorebenzene in at least 73% yield when heated to 450°C in a sealed tube; the CF₂ bridge appeared, in part, as octafluorocyclobutane. Nucleophilic attack by sodium methoxide- methanol on the diene occurred exclusively at the CFCF bond, causing the formation of 1,2,4,7,7-pentafluoro-3-methoxybicyclo- [2,2,1]hepta-2,5-diene and a 1,4,5,6,7,7-hexafluoro-5-methoxybicyclo [2,2,1]hept-2-ene thought, on the basis of ¹⁹F nmr data, to be the 6-$\text{endo}$-F,5-$\text{exo}$-MeO isomer. Radical attack on 1,2,3,- 4,7,7-hexafluorobicyclo[2,2,1]hepta-2,5-diene by bistrifluoromethyl nitroxide took place at both olefinic sites, with a $\text{ca}$. 10:1 preference for the CFCF linkage; all three geometrical isomers of 5,6-bis(bistrifluoromethylamino-oxy)-1,4,5,6,7,7- hexafluorobicyclo[2,2,1]hept-2-ene were formed.     

2,3-Dichlorobicyclo[2.2.1]hepta-2,5-diene: A Convenient Precursor of Norbornadiene-2,3-diynes

Norbornadienes that feature the properties of norbornadiene and of the ene-diyne in the same molecule have been prepared via a simple and high-yielding route starting fromdichlorobicyclo[2.2.1]hepta-2,5-diene (1).     

10-(3-Hydroxypropyl)-1,4,6,8-tetraphenyl-1,4,7,8-tetraaza-5-phosphoniaspiro[4.5]deca-6,9-diene chloride: synthesis and molecular structure

The reaction of 2-(3,4-dihydro-2H-pyran-5-yl)-1,3-diphenyl-1,3-diaza-2³-phospholidine with C,N-diphenylnitrilimine yields 10-(3-hydroxypropyl)-1,4,6,8-tetraphenyl-1,4,7,8-tetraaza-5-phosphoniaspiro[4.5]deca-6,9-diene chloride. Its structure was determined by X-ray diffraction analysis.     

Synthesis and chemistry of tricyclic cyclopropene-tricyclo[3.2.2.0]nona-2(4),6-diene

The 1,2-bridged tricyclic cyclopropene, tricyclo[3.2.2.0^2,4]nona-2(4),6-diene (1), has been synthesized by the elimination of 2-bromo-4-chlorotricyclo[3.2.2.0^2,4]-non-6-ene (5). Cyclopropene 1 will undergo different isomerizations in ether solution and in neat conditions. Compound 1 rearranged to an anti-Bredt compound 4 via diradical mechanism in ether and tricyclic compound 6 via vinyl carbene mechanism in neat conditions. Compound 1 can be trapped with DPIBF at different temperatures yielding different results: the exo-endo adduct 2 (exo-addition from the view of the cyclopropene and endo-addition from the view of bicyclo[2.2.2]octene) is a sole product at 0°C by slowly addition of methyllithium, and the exo-endo adduct 2, endo-endo adduct 9, anti-Bredt adduct 3, and styrene 8 are isolated at ether refluxing temperature. Styrene 8 is proposed to be formed from endo-endo adduct 9 by diradical mechanism. The chemistry of exo-endo adduct 2 and endo-endo adduct 9 is as well studied. The exo-endo adduct 2 undergoes hydration in trifluoroacetic acid to generate 1,3-cis-diol 11 followed by eliminations of water and formaldehyde to give naphthalene 12. The endo-endo adduct 9 reacts with water in tetrahydrofuran-containing silica gel to yield 1,4-cis-diol 10. Both 9 and 10 react with trifluoroacetic acid to form trans-3-hydroxy trifluoroacetate 13. Compound 13 will undergo hydrolysis and isomerization to generate 1,3-cis-diol 11 in trifluoroacetic acid.     

Ambiguousness of GC-MS identification of spiro[2.4]hepta-4,6-diene in natural objects

The publications on the GC-MS identification of spiro[2.4]hepta-4,6-diene in various natural objects were critically considered. Significant similarity of the mass spectra and coincidence of the GC retention indices on standard nonpolar phases of spiro[2.4]hepta-4,6-diene (761±3) and its isomer (toluene, 760±8) do not allow one to assert that the spirocyclic hydrocarbon was found in all the cases. Additional analytical parameters should be applied to differentiate such isomers.     

Unusual rearrangement in the reaction of cyclopropanated cyclopentadienes with Et3Al/CH2I2 in CH2Cl2

The reaction of Et₃Al/CH₂I₂ reagent with cyclopropanated spiro[2.4]hepta-4,6-diene and 6-substituted fulvenes in CH₂Cl₂ was found to lead to the selective formation of rearrangement products through sequential cyclopropyl-allyl rearrangement and cyclopropanation.     

Studies on polymers from cyclic dienes. XII. Cationic polymerization of spiro[2,4]hepta-4,6-diene

Polymerizations of spiro[2,4]hepta-4,6-diene were carried out with cationic initiators and Ziegler-type catalysts. This monomer polymerized very rapidly with a variety of cationic initiators, and low monomer and initiator concentrations had to be employed in order to avoid formation of crosslinked polymers. The polymer contained 1,2 and 1,4 addition units, and there was no indication of the opening of the cyclopropyl ring in the monomer unit. The following relationship was obtained: [η] = 4.5 × 10^?8M?_n^1.71. The exponential coefficient of this equation is much greater than those typical of vinyl polymers, suggesting that the polymer chain is very stiff. The polymer showed much enhanced resistance to autoxidation as compared with polycyclopentadiene, and its softening point was above 200°C. These interesting physical and chemical properties of the monomer and the polymer can be associated with their spiro structures.     

Skeletal isomerism within 1,3-disilabicyclo[1.1.0]butane and 2,3-disilabuta-1,3-diene derivatives

A bis-adamantane-spiro-fused 1,3-bis(triisopropylsilyl)-1,3-disilabicyclo[1.1.0]butane equilibrates with the corresponding 2,3-bis(triisopropylsilyl)-1,3-disilabuta-1,3-diene with a ratio of 1:19. The 1,3-disilabuta-1,3-diene was fully characterized by a combination of multinuclear NMR and UV-VIS spectroscopies, elemental analysis, and single-crystal X-ray diffraction analysis.     

High-Temperature Bromination XIII [1]: Bromination of Dimethyl 7-Oxabicyclo[2.2.1]hepta-2,5-diene-2,3dicarboxylate

The electrophilic addition of bromine to dimethyl 7-oxabicyclo[2.2.1]hepta-2,5-diene-2,3-dicarboxylate 10 at 0 and –60°C led in high yield to the formation of dibromide 11. However, high-temperature bromination of 10 in carbon tetrachloride at 77°C gave four products 12–15, three of them with nonrearranged skeleton. Similarly, bromination of the dibromides 14 and 15 at 77°C yielded the nonrearranged tetrabromides 13 and 16, respectively. The structure of the tetrabromide 13 was solved by single-crystal X-ray analysis. The formation mechanism is discussed and supported by calculations.     

Thermal degradation of poly((E,E)-[6.2]paracyclophane-1,5-diene)

Thermal degradation of poly((E,E)-[6.2]paracyclophane-1,5-diene) is studied in inert and oxidative environments by using thermogravimetric analysis, pyrolysis GC/MS, pyrolysis GC/FT-IR, and variable temperature-diffuse reflectance infrared spectroscopy (VT-DRIFTS). Thermal degradation in helium begins by depolymerization yielding a volatile product capable of abstracting hydrogens from the polymer residue. Multiple hydrogen abstractions result in a variety of volatile species containing benzyl-benzyl bonds. In the presence of oxygen, polymer decomposition is dictated by reactions of peroxy and hydroperoxy radicals. At low temperatures, oxygenated species are the primary products. At higher temperatures, increased unsaturation is detected in the polymer residue. In both inert and oxidative environments, the strain associated with alignment of paracyclophane aromatic rings is lost during the initial stages of thermal degradation. © 1992 John Wiley & Sons, Inc.     

Preparation of bicyclo[2.2.1]hepta-2,5-diene by the condensation of cyclopentadiene with acetylene

Summary The condensation of cyclopentadiene with acetylene under pressure gave a 40–45% yield of bicyclo[2.2.1]hepta-2.5-diene, the starting material for the synthesis of the insecticide aldrin.     

[f]-Fused purine-2,6-diones: Synthesis of new [1,3,5]- and [1,3,6]-thiadiazepino-[3,2-f]-purine ring systems

Summary 6-Phenyl-1,3-dimethyl-2,4-dioxo-1,2,3,4,8,9-hexahydro-[1,3,5]-thiadiazepino-[3,2-f]-purine (5) was obtained by a three-step synthesis from 8-mercapto-1,3-dimethyl-3,7-dihydro-1H-purine-2,6-dione (1) and 2-(benzoylamino)-ethyl chloride (2)via 8-(benzoylaminoethylthio)-1,3-dimethyl-3,7-dihydro-1H-purine-2,6-dione (3) and its chloromido derivative4. The analogous 9-phenyl-1,3-dimethyl-2,4-dioxo-1,2,3,4,6,7-hexahydro-[1,3,6]-thiadiazepino-[3,2-f]-purine (7) was synthesized either from compound1 and N-(2-chloroethyl)-benzimido chloridevia N-(chloroethyl)-S-(1,3-dimethyl-2,4-dioxo-1,2,3,4-tetrahydro-7H-purin-8-yl)-benzothioimide (6), or alternatively from 7-(2-benzoylaminoethyl)-8-bromo-1,3-dimethyl-3,7-dihydro-1H-purine-2,6-dione (9), its 8-mercapto derivative10 and the corresponding chloroimido compound11 being the intermediates.Part of this paper was presented as a preliminary report at the Congress of Czech and Slovak Chemical Societies, Olomouc, Czech Republic, September 13–16, 1993     

[1,3]Dioxolo[5,6][1]benzothieno[2,3-c]-quinolin-6(5H)-ones

Summary The reaction of 3,4-methylenedioxycinnamic acid (1) with thionyl chloride resulted in the formation of 7-chlorothieno[2,3-f]-1,3-benzodioxole-6-carbonyl chloride (2) and cinnamoyl chloride (3). Subsequent reaction of the former withp-substituted anilines led to the formation of 7-chloro-N-(p-substituted phenyl)-thieno[2,3-f]-1,3-benzodioxole-6-carboxamides (4a–c) which on photocyclization afforded 2-substituted [1,3]dioxolo[5,6][1]benzothieno[2,3-c]quinolin-6(5H)-ones (5a–c) in fairly good yields and high purity. The structures have been confirmed by IR,¹H NMR, and analytical methods.Accepted for presentation at the Hong Kong International Symposium on Heterocyclic Chemistry (August 13–16, 1995)     

Pyridyl-substituted [1,3]Dithiolo-[4,5-<Emphasis Type="Italic">b</Emphasis>][1,4]dithiine-2-thiones

We have obtained 5-(2-pyridyl)[1,3]dithiolo[4,5-b][1,4]dithiine-2-thione for the first time by cycloaddition of 2-ethynylpyridine to 4,5-dihydro-1,3-dithioltrithione (isotrithionedithiol). We have studied this thione, 5-(2-pyridyl)- and 5-(4-pyridyl)-5,6-dihydro[1,3]dithiolo[4,5-b][1,4]dithiine-2-thiones by mass spectroscopy and also IR, UV, ¹H and ¹³C NMR spectra. We have determined the crystal and molecular structure of 5-(2-pyridyl)-5,6-dihydro[1,3]dithiolo[4,5-b][1,4]dithiine-2-thione.__________Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 429–434, March, 2005.