High-pressure Raman spectroscopic studies on orthophosphates Ba3(PO4)2 and Sr3(PO4)2

By using diamond anvil cell (DAC), high-pressure Raman spectroscopic studies of orthophosphates Ba₃(PO₄)₂ and Sr₃(PO₄)₂ were carried out up to 30.7 and 30.1 GPa, respectively. No pressure-induced phase transition was found in the studies. A methanol:ethanol:water (16:3:1) mixture was used as pressure medium in DAC, which is expected to exhibit nearly hydrostatic behavior up to about 14.4 GPa at room temperature. The behaviors of the phosphate modes in Ba₃(PO₄)₂ and Sr₃(PO₄)₂ below 14.4 GPa were quantitatively analyzed. The Raman shift of all modes increased linearly and continuously with pressure in Ba₃(PO₄)₂ and Sr₃(PO₄)₂. The pressure coefficients of the phosphate modes in Ba₃(PO₄)₂ range from 2.8179 to 3.4186 cm⁻¹ GPa⁻¹ for ν₃, 2.9609 cm⁻¹ GPa⁻¹ for ν₁, from 0.9855 to 1.8085 cm⁻¹ GPa⁻¹ for ν₄, and 1.4330 cm⁻¹ GPa⁻¹ for ν₂, and the pressure coefficients of the phosphate modes in Sr₃(PO₄)₂ range from 3.4247 to 4.3765 cm⁻¹ GPa⁻¹ for ν₃, 3.7808 cm⁻¹ GPa⁻¹ for ν₁, from 1.1005 to 1.9244 cm⁻¹ GPa⁻¹ for ν₄, and 1.5647 cm⁻¹ GPa⁻¹ for ν₂.     

Dielectric and conductivity relaxations in quaternary ammonium polymer

Ionic conductivity of dry quaternary ammonium polymer, polydiallyldimethylammonium with Cl⁻ and H₂PO₄⁻ counter ions was studied in a wide range of frequencies (10⁻²-10⁷ Hz) and temperatures (300-470 K). The data were analysed within the formalism of permittivity. WAXS, and thermal properties of this polymer were investigated prior to conductivity measurements.     

Preparation, structure and oxide ion conductivity in Ce6−xYxMoO15−δ (x=0.1-1.4) solid solutions

The Ce_6−xY_xMoO_15−δ solid solution with fluorite-related structure have been characterized by differential thermal analysis/thermogravimetry (DTA/TG), X-ray diffraction (XRD), IR, Raman, scanning electric microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) methods. The electric conductivity of samples is investigated by Ac impedance spectroscopy. An essentially pure oxide-ion conductivity of the oxygen-deficiency was observed in pure argon, oxygen and air. The highest oxygen-ion conductivity was found in Ce_5.5Y_0.5MoO_15−δ ranging from 5.9×10⁻⁵ (S cm⁻¹) at 300 °C to 1.3×10⁻² (S cm⁻¹) at 650 °C, respectively. The oxide-ion conductivities remained stable over 80 h-long test at 800 °C. These properties suggested that significant oxide-ionic conductivity exists in these materials at moderately elevated temperatures.     

Photocatalytic oxidation of natural organic adsorbates on anatase TiO2 films observed by infrared adsorption spectroscopy with a multiple internal reflection geometry

Photocatalytic oxidation of organic adsorbates on anatase TiO₂ films has been examined in different atmospheres of humid air, dry air and vacuum. The photocatalytic oxidation was observed by IR absorption spectroscopy (IRAS) with a multiple-internal-reflection (MIR) geometry. The photocatalytic oxidation is the fastest in the air at a humidity of 70% where oxygen and water vapor are consuming to produce OH radicals and O₂⁻ anions on the TiO₂ surface with the UV exposure. In the dry air, a rate of the photocatalytic oxidation is almost 30% of that in the humid air, where only O₂⁻ anions oxidize the organic adsorbates. In vacuum, on the other hand, it is negligible, which suggests that adsorbed H₂O molecules do not play an important role in the photocatalytic reaction. It is suggested that an addition of the water vapor is necessary to achieve the higher catalytic activity.     

Control of composition and crystallinity in hydroxyapatite films deposited by electron cyclotron resonance plasma sputtering

Hydroxyapatite (HAp) films were deposited by electron cyclotron resonance plasma sputtering under a simultaneous flow of H₂O vapor gas. Crystallization during sputter-deposition at elevated temperatures and solid-phase crystallization of amorphous films were compared in terms of film properties. When HAp films were deposited with Ar sputtering gas at temperatures above 460 °C, CaO byproducts precipitated with HAp crystallites. Using Xe instead of Ar resolved the compositional problem, yielding a single HAp phase. Preferentially c-axis-oriented HAp films were obtained at substrate temperatures between 460 and 500 °C and H₂O pressures higher than 1×10⁻² Pa. The absorption signal of the asymmetric stretching mode of the PO₄³⁻ unit (ν₃) in the Fourier-transform infrared absorption (FT-IR) spectra was the narrowest for films as-crystallized during deposition with Xe, but widest for solid-phase crystallized films. While the symmetric stretching mode of PO₄³⁻ (ν₁) is theoretically IR-inactive, this signal emerged in the FT-IR spectra of solid-phase crystallized films, but was absent for as-crystallized films, indicating superior crystallinity for the latter. The Raman scattering signal corresponding to ν₁ PO₄³⁻ sensitively reflected this crystallinity. The surface hardness of as-crystallized films evaluated by a pencil hardness test was higher than that of solid-phase crystallized films.     

Photocatalytic abilities of gel-derived P-doped TiO2

P-doped TiO₂ nanoparticles were synthesized through hydrolysis and condensation of Ti(OC₂H₅)₄ with H₃PO₄ additions. Effects of [H₃PO₄]/[Ti(OC₂H₅)₄] molar ratios on the anatase-to-rutile phase transformation, crystallite sizes, surface areas, and photocatalytic abilities of the gel-derived P-doped TiO₂ were investigated. The P-doped TiO₂ nanoparticles prepared by [H₃PO₄]/[Ti(OC₂H₅)₄]=0.03 were composed of anatase monophase even at 900 ^oC and possessed very strong photocatalytic ability. Kinetic studies on the P-doped TiO₂ to photocatalytically decompose methylene blue under irradiation of 365 nm UV light found that the P-doped TiO₂ prepared by [H₃PO₄]/[Ti(OC₂H₅)₄]=0.03 and calcined at 800 ^oC had the specific reaction rates, at 25 °C, k_A,m=0.76 m³/(kg min) (based on the mass of P-doped TiO₂) and k_A,BET=46.2×10⁻⁶ m/min (based on the BET surface area of P-doped TiO₂), which is superior to the performance of a commercial product, P25 (k_A,m=0.22 m³/(kg min) and k_A,BET=4.8×10⁻⁶ m/min).     

Preparation and mechanism of formation of hematite particles in the Fe-HNO3 system

The mechanism of formation of hematite particles in the Fe-HNO₃ system is investigated by introduction of a small amount of PO₄³⁻ ions to the system. The intermediate species in the reaction, 6-line ferrihydrite, is successfully obtained. The transformation of 6-line ferrihydrite to hematite is investigated. The results show that Fe(II) in the Fe-HNO₃ system can catalyze the dissolution of 6-line ferrihydrite, leading to the rapid formation of hematite.     

Intralamellar structural modifications related to the proton exchanging in K4Nb6O17 layered phase

Basic structural aspects about the layered hexaniobate of K₄Nb₆O₁₇ composition and its proton-exchanged form were investigated mainly by spectroscopic techniques. Raman spectra of hydrous K₄Nb₆O₁₇ and H₂K₂Nb₆O₁₇·H₂O show significant modifications in the 950-800 cm⁻¹ region (Nb-O stretching mode of highly distorted NbO₆ octahedra). The band at 900 cm⁻¹ shifts to 940 cm⁻¹ after the replacement of K⁺ ion by proton. Raman spectra of the original materials and the related deuterated samples are similar suggesting that no isotopic effect occurs. Major modifications were observed when H₂K₂Nb₆O₁₇ was dehydrated: the relative intensity of the band at 940 cm⁻¹ decreases and new bands seems to be present at about 860-890 cm⁻¹. The H⁺ ions should be shielded by the hydration sphere what preclude the interaction with the layers. Removing the water molecules, H⁺ ions can establish a strong interaction with oxygen atoms, decreasing the bond order of Nb-O linkage. X-ray absorption near edge structure studies performed at Nb K-edge indicate that the niobium coordination number and oxidation state remain identical after the replacement of potassium by proton. From the refinement of the fine structure, it appears that the Nb-Nb coordination shell is divided into two main contributions of about 0.33 and 0.39 nm, and interestingly the population, i.e., the number of backscattering atoms is inversed between the two hexaniobate materials.     

The suppression of structural phase transformation in LaVO3 and La1−xSrxVO3 thin films fabricated by pulsed laser deposition

Highly oriented (100) thin films of LaVO₃ and La_1−xSr_xVO₃ have been fabricated by pulsed laser deposition in a reducing atmosphere. The films show a transition from insulating to metallic behaviour in the composition region of x, 0.175<x<0.200. In the single crystals of the antiferromagnetic insulating phase, a first-order structural phase transition is observed few degrees below the magnetic transition, which manifests itself as a kink in the temperature dependence of resistivity. In the highly oriented thin films of LaVO₃ and La_1−xSr_xVO₃ fabricated on lattice matched substrates in this study, the structural phase transformation in the insulating phase has been suppressed. The electrical conduction is found to take place via hopping through localized states at low temperatures. The metallic compositions show a non-linear (T^1.5) behaviour in the temperature dependence of resistivity. V (2p) core level spectra of these films show a gradual change in the relative intensities of V³⁺ and V⁴⁺ ions as the value of x increases.     

The roles of Li and F ions in Li-F-codoped TiO2 system

An overall comparative study was carried out on Li-doped, F-doped, and Li-F-codoped TiO₂ powders in order to elucidate the roles of Li⁺ and F⁻ ions in photocatalyst. The characteristic data were based on the analysis of XRD, XPS, and PL spectra. The effects of atomic ratio of Li/Ti and F/Ti on the photocatalytic activity were also investigated. As the results, Li doping accelerated the phase formation of rutile in lower temperature while F doping prevented the phase transition from anatase to rutile. Li doping inducted a large amount of O_OH on the surface of TiO₂, while F doping consumed much of O_OH. Li⁺ ions acted as the roles of recombination center of electron-hole pairs while F doping could restrain the recombination of electron-hole pairs on the center of Li⁺ ions. The roles of Li⁺ and F⁻ ions were also confirmed in the experimental section, where the photocatalytic activity of TiO₂ was improved greatly by synergistic reaction of Li⁺ and F⁻ ions.     

Structural, optical and scintillation properties of cerium cyclotriphosphates and polyphosphates

The cerium cyclotriphosphate CeP₃O₉·3H₂O and polyphosphate Ce(PO₃)₃ have been optically investigated for the first time. In both materials, excitation and emission spectra under UV and X-ray excitations as well as emission decays of Ce³⁺ were measured at room temperature. The spectroscopic results of anhydrous Ce(PO₃)₃, prepared by progressively heating the corresponding CeP₃O₉. 3H₂O, are discussed and correlated with the structural data.For the Ce(PO₃)₃ polyphosphate material, the Stokes shift of the d-f emission is very small (760 cm⁻¹), inducing an efficient ultraviolet luminescence and a new application as scintillator.     

Photocatalytic H2 evolution under visible light irradiation on AgIn5S8 photocatalyst

A new visible-light-driven photocatalyst AgIn₅S₈ was prepared by a simple two-step process, which involves the first co-precipitation process at room temperature and subsequently heat-treatment process at 750 °C under pure argon flow protection. The obtained AgIn₅S₈ sample showed high activity for the evolution of hydrogen under visible light irradiation (λ?420 nm) from aqueous solution containing S²⁻ and SO₃²⁻ ions as sacrificial electron donors. It was found that several experimental parameters, such as the concentration of sacrificial reagents and the loading of Pt co-catalyst, play important roles on the evolution rate of H₂ under visible light irradiation.     

Reactivity and XAFS study on (1−x)CeO2-xNiO (x=0.025-0.3) system in the two-step water-splitting reaction for solar H2 production

The redox reaction of Ce⁴⁺-Ce³⁺ promoted by the catalytic function of nickel ions in a (1−x)CeO₂-xNiO solid solution was investigated for solar H₂ production by the two-step water-splitting reaction. By irradiation using an infrared imaging lamp as a solar simulator, the O₂-releasing reaction with (1−x)CeO₂-xNiO solid solution proceeded at 1673-1873 K, and its reduced form was produced. The amounts of H₂ gas evolved by the reduced form were 1.2-2.5 cm³/g and the evolved gases amounts ratio of H₂/O₂ was nearly 2, which is equal to the stoichiometric value of the water-splitting reaction (H₂O=H₂+1/2O₂). The maximum amounts of evolved H₂ and O₂ gases were obtained at the Ce:Ni mole ratio of 0.95:0.05 (x=0.05) in the (1−x)CeO₂-xNiO system. The X-ray absorption fine structure (XAFS) measurement showed that the O₂-releasing and H₂-generation reactions with (1−x)CeO₂-xNiO solid solution were repeatable with the redox system of Ce⁴⁺-Ce³⁺, which was enhanced by the catalytic function of Ni²⁺-Ni⁰.     

Molecular dynamics and phase transitions in paramagnetic [Mn(H2O)6][SiF6] investigated by H NMR

The temperature dependences of ²H NMR spectra and spin-lattice relaxation time T₁ have been measured for paramagnetic [Mn(H₂O)₆][SiF₆]. The obtained ²H NMR spectra were simulated by considering the quadrupole interaction and paramagnetic shift. The variation of the spectra measured in phase III was explained by the 180° flip of water molecules. The activation energy E_a and the jumping rate at infinite temperature k₀ for the 180° flip of H₂O were obtained as 35 kJ mol⁻¹ and 4×10¹⁴ s⁻¹, respectively. The spectral change in phases I and II was ascribed to the reorientation of [Mn(H₂O)₆]²⁺ around the C₃ axis where the E_a and k₀ values were estimated as 45 kJ mol⁻¹ and 1×10¹³ s⁻¹, respectively. From the almost temperature independent and short T₁ value, the correlation time for electron-spin flip-flops, τ_e, and the exchange coupling constant J were obtained as 3.0×10⁻¹⁰ s and 2.9×10⁻³ cm⁻¹, respectively. The II-III phase transition can be caused by the onset of the jumping motion of [Mn(H₂O)₆]²⁺ around the C₃ axis.     

Electrochemical properties of LiFe0.9Mg0.1PO4 / carbon cathode materials prepared by ultrasonic spray pyrolysis

The LiFe_0.9Mg_0.1PO₄/C powder of pure olivine phase can be prepared with the duplex process of spray pyrolysis synthesis (at 450 ^°C) and subsequent heat treatment (at 700 ^°C for 2, 4 and 8 h). From scanning electron microscopy observation with corresponding elemental mapping images of iron, phosphorous and magnesium, it could be found that the LiFe_0.9Mg_0.1PO₄ powders are covered with fine pyrolyzed carbon. Raman spectra indicate that the phase of carbon with higher electronic conductive phase is predominant when prolonged subsequent heat treatment is carried out. The carbon coatings on the LiFe_0.9Mg_0.1PO₄ surface can improve the conductivity of the LiFe_0.9Mg_0.1PO₄ powder (3.8×10⁻⁵ S cm⁻¹) to about a factor of ∼10⁴ higher than the conductivity of LiFePO₄. The stability and cycle life of a charge/discharge cycle test of lithium ion secondary batteries are also enhanced. The results indicate that the LiFe_0.9Mg_0.1PO₄ powder, prepared at a pyrolysis temperature of 450 ^°C and with post-heat-treatment at 700 ^°C for 8 h, exhibits a specific initial discharge capacity of about 132 mA h g⁻¹ at C/10 rate, 105 mA h g⁻¹ at 1C, and 87 mA h g⁻¹ at 5C.     

Characterisation of the Ru/MgF2 catalyst with adsorbed O2, NO, CO probe molecules by EPR and IR spectroscopy

Electron paramagnetic resonance (EPR) and infrared (IR) spectroscopy were used to study the formation of ruthenium and adsorbed species appearing on the catalyst during O₂, NO, and CO adsorption at room temperature on 1 wt% Ru/MgF₂ catalysts prepared from Ru₃(CO)₁₂ . Both EPR and IR results provided clear evidence for the interaction between surface ruthenium and probe molecules. No EPR signals due to ruthenium (Ru) species were recorded at 300 and 77 K after H₂-reduction of the catalyst at 673 K. However, at 4.2 K a very weak EPR spectrum due to low-spin (4d⁵) Ru³⁺ complexes was detected. A weak anisotropic O₂^- radicals signal with g_∣∣=2.017 and g_⊥=2.003 superimposed on a broad (ΔB_pp=120 mT), slightly asymmetric line at g=2.45(1) was identified after O₂ admission to the reduced sample. Adsorption of NO gives only a broad, Gaussian-shaped EPR line at g=2.43(1) indicating that the admission of NO, similarly to O₂ adsorption, brings about an oxidation of Ru species in the course of the NO decomposition reaction. Introduction of NO over the CO preadsorbed catalyst leads to EPR spectrum with parameters g_⊥=1.996, g_∣∣=1.895, and A_⊥^N=2.9 mT assigned to surface NO species associated with Ru ions. The IR spectra recorded after adsorption of NO or CO probe molecules showed the bands in the range of frequency characteristic of ruthenium nitrosyl, nitro, and nitrate/nitrite species and the bands characteristic of ruthenium mono-and multicarbonyls, respectively. Addition of CO after NO admission to the catalyst leads to appearance in the IR spectrum, beside the ones characteristic of NO adsorption, the bands which can be attributed to Ru-CO₂ and Ru-NCO species, indicating that the reaction between NO and CO occurs. These species were also detected after CO adsorption followed by NO adsorption, additionally to the band at 1850 cm⁻¹ being due to cis-type species.     

Blue and red long lasting phosphorescence (LLP) in β-Zn3(PO4)2:Mn,Zr

Multi-color long lasting phosphorescent (LLP) phenomenon in β-Zn₃(PO₄)₂:Mn²⁺,Zr⁴⁺ was systematically investigated. It is found that the red (λ_Em=616 nm) LLP performance of Mn²⁺ such as brightness and duration is largely improved, and that the blue (λ_Em=475 nm) LLP of Zr⁴⁺ with lower intensity appears when Zr⁴⁺ ions are co-doped into the matrix. The fluorescence, phosphorescence and thermoluminescence (TL) spectra show that Mn²⁺ ion is solely expected as a luminescent center, while Zr⁴⁺ ion not only acts as a luminescent center, but also induces an electron trap (Trap_Zr) associated with a TL peak at 344 K. The trap depth for Trap_Zr is 0.25 eV, while that for the intrinsic trap is 0.38 eV, associated with a dominant peak at 385 K for Zn₃(PO₄)₂:Mn²⁺. The Zr⁴⁺-induced trap with suitable depth is responsible for the improvement of the red LLP of Mn²⁺ ion and the appearance of the blue LLP of Zr⁴⁺ ion. The LLP mechanism is also investigated.     

Diffusion of Li ion in graphite cluster model at 800 K: a direct molecular orbital dynamics study

Using the hydrogen terminated planar cluster model, C₅₄H₁₈, the stabilization site of Li⁺ ion was determined by the unrestricted Hartree-Fock (UHF) AM1 energy gradient method. Six kinds of stabilization sites are considered, suggesting that the Li⁺ ion is rather stable at the two distinct sites in the bulk where the potential energy difference between them is 2.0 kcal/mol. For the Li⁺ ions stabilized at these two sites, the diffusion processes were simulated at 800 K through the direct molecular orbital dynamics procedure which was newly developed by one of the present authors. No jumping diffusion occurs with Li⁺ ions among the stabilization sites, but they diffuse along the outline of the cluster model with the fluctuations. It takes 2.0 ps for a Li⁺ ion to diffuse from the lower potential site to another equivalent site. On the other hand, it takes 0.7 ps to move from the higher potential site to the unstable circumference site composed of corner (armchair edge) carbon atoms. As the result, the diffusivity is approximated as 10⁻⁸-10⁻⁷ m²/s.     

Stable cycle-life properties of Ti-doped LiFePO4 compounds synthesized by co-precipitation and normal temperature reduction method

Submicron-sized LiFePO₄ and Ti-doped LiFePO₄ cathode materials were synthesized by a reformative co-precipitation and normal temperature reduction method, for which Ti ions were added in the process of preparing precursors to pursue a kind of sufficient and homogenous doping way. ICP and XRD analyses indicate that Ti ions were sufficiently doped in LiFePO₄ and did not alter its crystal structure. It is noted that higher Ti ions doping levels are conducive to electrochemical performance of LiFePO₄, especially on the aspect of stable cycle-life at higher C rates. The sample doped with 3 at% Ti shows the most impressive cycling performance, even after 100 cycles, discharge capacity of 133 mAh g⁻¹ was obtained (102.3% of its initial value) at 1C rate, and the discharge decreased little from 124 to 120 mAh g⁻¹ (96.8% of its initial value) at 2C rate.     

Tetrahedral coordination for Zn in hexacyanometallates: Structures of Zn3A2[M(CN)6]2·xH2O with A=K, Rb, Cs and M=Ru, Os

Zinc hexacyanoruthenate (II) and hexacyanoosmate (II) were prepared and studied from X-ray diffraction (XRD), infrared (IR), and thermogravimetric (TG) data. These compounds were found to be isomorphous with the iron analogues, crystallizing with a rhombohedral unit cell (R−3c space group), where the zinc atom has tetrahedral coordination to N ends of CN groups. For Cs, compounds with formula unit ZnCs₂[M(CN)₆] and a cubic unit cell (Fm−3m) were also obtained. The crystal structures for the eight compositions were refined from the corresponding X-ray powder diffraction patterns using the Rietveld method. Related to the tetrahedral coordination for the Zn atom, the rhombohedral phase has a porous framework with ellipsoidal cavities of about 12.5×9×8 Å, communicated by elliptical windows of ∼5 Å. Within these cavities the exchangeable alkali metal ions are found. The filling of the cavity volume is completed with water molecules. IR spectrum senses certain charge delocalization from the inner metal, through the π-back donation mechanism. For Os compounds this effect is particularly pronounced, related to a more diffuse d orbitals for this metal.