Highly stereoselective and stereospecific syntheses of a variety of quercitols from d-(−)-quinic acid

The highly stereoselective synthesis of (−)-epi-, (−)-allo- and neo-quercitols as well as stereospecific synthesis of (−)-talo- and (+)-gala-quercitols have been achieved. The general strategy is employing dihydroxylation of the isolated double bond of various kinds of protected chiral (1,4,5)-cyclohex-2-ene-triols, which are derived from d-(−)-quinic acid. The choosing of protecting groups from either BBA (butane 2,3-bisacetal) or acetyl groups will result in the various degrees of stereoselectivity of dihydroxylation. On the other hand, the cyclohexylidene acetal moiety is attributed to the stereospecificity during dihydroxylation to afford the request molecules.     

A facile synthesis of a new trihydroxy piperidine derivative and (+)-proto-quercitol from d-(−)-quinic acid

We described herein the new synthesis of a trihydroxy piperidine derivative (1,4,5-trideoxy-1,5-imino-d-ribo-hexitol) and (+)-proto-quercitol from d-(−)-quinic acid, both are considered as inhibitors for glycosidases.     

Carbohydrate-derived spiroketals: stereoselective synthesis of di-d-fructose dianhydrides

A one-pot synthesis of di-d-fructose dianhydrides (DFAs) having the 1,6,9,13-tetraoxadispiro[4.2.4.2]tetradecane and 1,7,10,15-tetraoxadispiro[5.2.5.2]hexadecane skeleton has been accomplished. The methodology relies on the ability of per-O-protected 1,2-O-isopropylidene β-d-fructofuranose and β-d-fructopyranose derivatives to undergo a tandem acetal cleavage-intermolecular glycosylation-intramolecular spiroketalization process by reaction with suitable acid promoters, such as boron trifluoride etherate or trifluoromethanesulfonic acid, in apolar organic solvents. Spirocyclization proceeds then under irreversible reaction conditions to give binary mixtures of di-d-fructofuranose (α,α and α,β diastereomers) or di-d-fructopyranose 1,2′:2,1′ dianhydrides (β,β and α,β), respectively, the stereochemical outcome being dependent on the non-participating or participating character of the protecting groups. Thus, benzylated and allylated derivatives afford, preferentially, the non-symmetric DFAs (α,β), with diastereomeric excess up to 92%. In contrast, the use of participating benzoyl groups favours the C₂-symmetric diastereomer in both series.     

An efficient approach to d-threo-3-hydroxyaspartic acid for the synthesis of novel l-threo-oxazolines as selective blockers of glutamate reversed uptake

An efficient, stereoselective synthetic strategy to d-threo-3-hydroxyaspartic acid was developed. Starting from l-(2S,3S)-N-benzoyl-3-hydroxyaspartic acid dimethyl ester by a Deoxo-fluor-catalyzed cyclization reaction, an inversion of configuration at the β-center (erythro isomer), was observed. A base-induced epimerization reaction led to the d-trans-isomer, which was hydrolyzed to give d-threo-3-hydroxyaspartic acid with excellent stereoselectivity and overall yield. Starting from d-threo-3-hydroxyaspartic acid, l-threo-oxazolines can be stereoselectively synthesized.     

Stereoselective synthesis of muco-quercitol, (+)-gala-quercitol and 5-amino-5-deoxy-d-vibo-quercitol from d-mannitol

Synthesis of muco-quercitol, (+)-gala-quercitol, and 5-amino-5-deoxy-d-vibo-quercitol is described from d-mannitol using ring closing metathesis and diastereoselective dihydroxylations as key steps.     

Efficient synthesis of new N-alkyl-d-ribono-1,5-lactams from d-ribono-1,4-lactone

d-Ribono-1,4-lactone was treated with ethylamine in DMF to afford N-ethyl-d-ribonamide 9a in quantitative yield. Bromination of amide 9a by the system SOBr₂ in DMF or PPh₃/CBr₄ in pyridine led, after acetylation, to epoxide 7. However, treatment of amide 9a with acetyl bromide in dioxane followed by acetylation gave 2,3,4-tri-O-acetyl-5-bromo-5-deoxyl-N-ethyl-d-ribonamide 10a. Methanolysis of 10a, with sodium methoxide, afforded the N-ethyl-d-ribonolactam 11a in 51% overall yields. Using this method, N-butyl, N-hexyl, N-dodecyl, and N-benzyl-d-ribonolactams 11b-e were obtained in good yields (48-53%).     

Racemization behavior of l,l-lactide during heating

To control the depolymerization process of poly(l-lactic acid) into l,l-lactide for feedstock recycling, the racemization of l,l-lactide as a post-depolymerization reaction was investigated. In the absence of a catalyst, the conversion to meso-lactide increased with increase in the heating temperature and time at a higher rate than the conversion into oligomers. The resulting high composition of meso-lactide suggests that the direct racemization of l,l-lactide had occurred in addition to the known racemization mechanism that occurs on the oligomer chains. In the presence of MgO, the oligomerization rapidly proceeded to reach an equilibrium state between monomers and oligomers. The equilibrium among l,l-, meso-, and d,d-lactides was found to be a convergent composition ratio l,l-:meso-:d,d-lactides = 1:1.22:0.99 (wt/wt/wt) after 120 min at 300 °C. This composition ratio also indicates that in addition to the known racemization reaction on the oligomer chains, direct racemization among the lactides is also a frequent occurrence.     

Interactions of aluminum(III) with the biologically relevant ligand d-ribose

Aluminum(III) can be absorbed when it is appropriately complexed. There are several plasma components which can bind weakly Al(III). Many proteins bind Al(III) in solution quite strongly. Carbohydrates bearing an abundance of electronegative functional groups can interact with metal cations. In solution, d-ribose exists as a mixture at equilibrium of many isomers and only a few of them bear a ‘complexing’ sequence of the hydroxyl groups. The presence of d-ribose in an Al(III) solution experiences a decrease of its Brönsted-acid sites. The lowering of the Brönsted acidity of an Al(III)-d-ribose mixture suggests the existence of attractive interactions (‘association’) between Al(III) ion and the complexing sequence of the hydroxyls of d-ribose. There is enhancement in the stability of the interaction complexes between Al(III) and d-ribose through strong intramolecular hydrogen bonding, which offers the possibility to investigate the kinetics of the subsequent proton release reactions. On the basis of the kinetic results, it may be concluded that proton release reactions, which are associated with the complexation reactions, are associatively activated. The complexes (Al(H₂O)_6−n(d-ribose_−nH)⁽³⁻ⁿ⁾⁺) resulting from the various ‘complexing’ forms of d-ribose are formed at mainly acidic pH. As the pH increases, the values of the activation enthalpy, ΔH^≠, are changing, because of the formation of mixed hydroxo-complexes (Al(H₂O)_6−n−m(OH)_m(d-ribose_−nH)^(3−n−m)+); finally, OH⁻ displaces d-ribose from the coordination sphere of Al(III) in a rather slow process, i.e. with high values of ΔH^≠; the activation enthalpy values, ΔH^≠, decrease with the progression of the displacement, becoming finally very small due to the formation of a precipitate. Chelate coordination of d-ribose with some divalent and trivalent metal ions has been also reported.     

Selection of synthetic receptors capable of sensing the difference in binding of d-Ala-d-Ala or d-Ala-d-Lac ligands by screening of a combinatorial CTV-based library

Screening of a combinatorial CTV-based artificial, synthetic receptor library 1 {1-13, 1-13, 1-13} for binding of a variety d-Ala-d-Ala and d-Ala-d-Lac containing ligands (6-11) was carried out in phosphate buffer (0.1 N, pH=7.0). After screening and Edman sequencing, synthetic receptors were found containing amino acid sequences, which are either characteristic for binding dye labeled d-Ala-d-Ala or d-Ala-d-Lac containing ligands. For example, receptors capable of binding d-Ala-d-Ala containing ligands 6, 7, 9 and 11 contained—almost in all cases—at least one basic amino acid residue—predominantly Lys—in their arms. This was really a striking difference with the arms of the receptors capable of binding d-Ala-d-Lac containing ligands 8 and 10, which usually contained a significant number of polar amino acids (Gln and Ser), especially in ligand 8, but hardly any basic amino acids. Use of different (fluorescent) dye labels showed that the label has a profound, albeit not decisive, influence on the binding by the receptor. A hit from the screening of the CTV-library with FITC-peptidoglycan (6) was selected for resynthesis and validation.     

New pyrano[3,4-b]indoles from 2-hydroxymethylindole and l-dehydroascorbic acid

2-Hydroxymethylindole reacts with l-dehydroascorbic acid under mild conditions to give (3R,3aR,10cS)-3-[(1S)-1,2-dihydroxyethyl]-3a,10c-dihydroxy-3a,5,6,10c-tetrahydrofuro[3′,4′:5,6]pyrano[3,4-b]indol-1(3H)-one. Its tosyl derivative undergoes cyclization to form a pentacyclic ketal derivative.     

Synthesis of 6-amino-6-deoxy-d-gulono-1,6-lactam and l-gulono-1,6-lactam derived from corresponding 5,6-O-sulfinyl hexono-1,4-lactones

Syntheses of 6-amino-6-deoxy-2,3-O-isopropylidene-d-gulono- and l-gulono-1,6-lactams 3 and 4 from corresponding glycono-1,4-lactones are described. Activation of the primary hydroxyl group requires 5,6-cyclic sulfite intermediate to obtain 6-azido-6-deoxy derivatives, which are cyclized after reduction.     

Concise and divergent approach to 3-O-acyl-l-noviose derivatives and their 3-amino bioisosteres: 3-O-benzoyl-l-noviose and N-benzoyl-3-amino-l-noviose

Generally applicable concise approaches to 3-O-acyl-l-noviose derivatives and their 3-amino bioisosteres, represented by 5 and 6, were described. Chiral aldehyde 7 was thus prepared from dimethyl l-tartrate in five steps, and converted into 5 and 6 by employing substrate induced asymmetric aldehyde or N-sulfinyl aldimine allylation and dihydropyrane epoxidation as key steps, respectively.     

A d,l-proline catalyzed diastereoselective trimolecular condensation: an approach to the one-pot synthesis of perhydrofuro[3,2-b]pyran-5-ones

d,l-Proline was found to catalyze efficiently the one-pot trimolecular condensation of indoles, a sugar hydroxyaldehyde, and Meldrum’s acid followed by intramolecular cyclization with evolution of carbon dioxide and elimination of acetone to afford 7-(1H-3-indolyl)-2,3-dimethoxyperhydrofuro[3,2-b]pyran-5-ones. The reaction proceeded cleanly at ambient temperature to afford the products in good yields with high diastereoselectivity.     

(3R,4S)-3,4,5-Trihydroxy-4-methylpentylphosphonic acid, an isosteric phosphonate analogue of 2-C-methyl-d-erythritol 4-phosphate, a key intermediate in the new pathway for isoprenoid biosynthesis

2-C-Methyl-d-erythritol 4-phosphate (MEP) is the first intermediate in the mevalonate-independent pathway for isoprenoid biosynthesis presenting the branched C₅ isoprene skeleton. Enantiopure (3R,4S)-3,4,5-trihydroxy-4-methylpentylphosphonic acid (MEP_N), an isosteric phosphonate analogue of MEP was synthesized from 1,2-O-isopropylidene-α-d-xylofuranose.     

A concise enantioselective synthesis of l-(−)-733,061 and (2S,3S)-methyl 3-aminopiperidine-2-carboxylate using catalytic enantioselective aza-Henry reaction as key step

An efficient enantioselective synthesis of l-(−)-733,061 and (2S,3S)-methyl 3-aminopiperidine-2-carboxylate is accomplished by means of catalytic enantioselective aza-Henry reaction. A key feature of this protocol is organocatalysis as genesis of chirality to ensure high degree of distereo- and enantiocontrol.     

Influence of hydrolytic degradation on the surface properties of poly-5d/95l-lactide resorbable bone plates

This study explores in vitro aging effects on the surface properties of resorbable PLA95 (poly-5d/95l-lactide) bone plates. The in vitro degradation of injection molded PLA95 bone plates was undertaken by soaking them in a PBS solution. Specimens were harvested at 0, 4, 6, 8, 12, 20, and 26 weeks. After each in vitro aging period, the surface morphology, viscosity, chemical structure, wettability, and thermal properties of the PLA95 bone plates were examined by scanning electron microscopy (SEM), capillary viscometers, attenuated total reflection fourier transform infrared spectroscopy (ATR-FTIR), contact angle, and modulated differential scanning calorimetry (MDSC), respectively. The surface morphology of aged PLA95 bone plates exhibited bulk erosion. As hydrolysis progressed, the inherent viscosity (I.V.) of the PLA95 plates gradually decreased from 0.83 ± 0.01 dL/g at week 0-0.46 ± 0.03 dL/g at week 26. However, the absorbance peak intensity ratio between δ_{as CH3} (A_1452 cm⁻¹) and ν_CO (A_1750 cm⁻¹) and the contact angle reveal different tendencies than that of molecular weight, which decreases. The contact angle of the PLA95 plates decreased until week 4, increased until week 8, and subsequently decreased again. Peak separation analysis reveals that the equilibrium part of the modulated DSC overlapped curves exhibit triple endothermic peaks. Over time, in vitro degradation changes the position and area of the individual peaks. After different time periods of degradation, the variation of wettability shows a tendency similar to the change of PLA95 plates crystallinity; the intensity ratio of A_1452 cm⁻¹ and A_1750 cm⁻¹ (δ_{as CH3}/ν _CO) absorbance peaks varied like the ratio of β/α-crystal heat of fusion. Results also show a similarity in the degradation time dependence in MDSC, contact angle, and ATR-FTIR measurements. During the in vitro aging process, the breakdown and subsequent recrystallization of PLA95 molecular chains might be attributed to a progressive change in wettability and the molecular conformation between δ_{as CH3} and ν_CO.     

Kinetics of thermo-oxidative and thermal degradation of poly(d,l-lactide) (PDLLA) at processing temperature

Poly(d,l-lactide) (PDLLA) degraded at processing temperature under air and nitrogen. A random chain scission model was established and used to determine the activation energy E_a, and FT-IR, ¹H and ¹³C NMR were used to elucidate the degradation behavior under different atmospheres. Results showed that there were two to three stages. The 1st stage was dominated by the oligomers containing carboxylic acid groups and hydroxyl groups, during which oxygen and nitrogen had little effect on the degradation, thus they share similar E_a. When the oligomers were consumed over or evaporated, the 2nd stage began, and oxygen had a promoting effect on the thermo-oxidation process, resulting in the great decrease in E_a. The third stage of PDLLA was observed when it degraded under nitrogen over 200 °C, which was caused by the appearance of carboxylic acid substance.     

Chiral self-assembly of triorganotin complexes: Syntheses, characterization, crystal structures and antitumor activity of organotin(IV) complexes containing (R)-(+)-methylsuccinic acid, (S)-(+)-methylglutaric acid and l-(−)-malic acid ligands

Six new chiral triorganotin(IV) complexes, {(R₃Sn)₂[C₃H₆(COO)₂]}_n (R = Me: 1; Bu: 2), {(R₃Sn)₂[C₄H₈(COO)₂]}_n (R = Me: 3; Bu: 4), and {(R₃Sn)₂[C₂H₄O(COO)₂]}_n (R = Me: 5; Bu: 6) have been prepared by treatment of (R)-(+)-methylsuccinic acid, (S)-(+)-methylglutaric acid and l-(−)-malic acid, with the corresponding R₃SnCl (R = Me, Bu) and sodium ethoxide in methanol. All the complexes were characterized by elemental analysis, FT-IR, NMR (¹H, ¹³C, ¹¹⁹Sn) spectroscopy and TGA. Except for 3, all of the complexes were also characterized by X-ray crystallography. The structural analyses reveal that complexes 1 and 5 have 2D network structures in which (R)-(+)-methylsuccinic acid and l-(−)-malic acid act as tetradentate ligands coordinated to trimethyltin(IV) ions. Complexes 2 and 4 have 3D metal-organic framework structures in which the deprotoned acids serve as tetradentate ligands. Complex 6 adopts a 1D zigzag chain structure and forms a 2D supramolecular framework through intermolecular C-H?O interactions. In addition, the antitumor activities of complexes 1-6 have been studied. We also have measured the specific rotation of the chiral dicarboxylic acids and the organotin derivatives.     

Effects of molecular weight and small amounts of d-lactide units on hydrolytic degradation of poly(l-lactic acid)s

Films of poly(l-lactic acid) (PLLA) with different number-average molecular weights (M_n) and d-lactide unit contents (X_d) were made amorphous and the effects of molecular weight and small amounts of d-lactide units on the hydrolytic degradation behavior in phosphate-buffered solution at 37 °C of PLLA were investigated. The degraded films were investigated using gravimetry, gel permeation chromatography, polarimetry, differential scanning calorimetry, X-ray diffractometry, and tensile testing. To exclude the effects of crystallinity on the hydrolytic degradation, the films were made amorphous by melt-quenching. The incorporation of small amounts of d-lactide units drastically enhanced the hydrolytic degradation of PLLA. In the period of 0-32 weeks, the hydrolytic degradation rate constant (k) of PLLA films increased with increasing X_d, while the k values did not depend on M_n. This means that the effects of X_d on the hydrolytic degradation rate of the films are higher than those of M_n. In contrast, in the period of 32-60 weeks neither X_d nor M_n was a crucial parameter to determine k values, probably because in addition to these parameters the differences in the amount of catalytic oligomers accumulated in films and crystallinity affect the hydrolytic degradation behavior of the films. The initially amorphous PLLA films remained amorphous even after the hydrolytic degradation for 60 weeks.