Chiral separation of racemic mandelic acids by use of an ionic liquid-mediated imprinted monolith with a metal ion as self-assembly pivot

A new chiral stationary phase based on molecularly imprinted polymers (MIP) was prepared in ionic liquid by use of the metal pivot concept. Imprinted monoliths were synthesized by use of a mixture of R-mandelic acid (template), 4-vinylpyridine, ethylene glycol dimethacrylate, and several metal ions as pivot between the template and functional monomer. A ternary mixture of dimethyl sulfoxide–dimethylformamide–[BMIM]BF₄ containing metal ions was used as the porogenic system. Separation of the enantiomers of rac-mandelic acid was successfully achieved on the MIP thus obtained, with resolution of 1.87, whereas no enantiomer separation was observed on the imprinted monolithic column in the absence of metal ions. The effects of polymerization conditions, including the nature of the metal ion and the ratios of template to metal ions and template to functional monomer, on the chiral separation of mandelic acid were investigated. The results reveal that use of metal ions as a pivot, in combination with ionic liquid, is an effective method for preparation of a highly efficient MIP stationary phase for chiral separation.

Ferrocene incorporating host-guest dyads with electrochemically controlled three-pole hydrogen bonding properties

We describe the electrochemically controlled hydrogen bonding interactions between the isobutyl flavin/2,6-diferrocenylamidopyridine (2·5) and 9,10-phenanthrenequinone/1-ferrocenyl-3-hexylurea (4·6) dyads. Cyclic and square wave voltammetry studies have shown that the binding efficiencies between these moieties can be electrochemically actuated in non-polar (CH₂Cl₂ for 2·5) or polar (DMF for 4·6) organic solvents between three distinct states.     

Oxidation of sulfides with hydrogen peroxide catalyzed by synthetic flavin adducts with dendritic bis(acylamino)pyridines

The catalytic activities of the cationic synthetic flavin adduct 1 with various dendritic and non-dendritic 2,6-bis(acylamino)pyridines 2 were examined for the oxidation of organic sulfides with H₂O₂. The adduct of 5-ethyllumiflavinium perchlorate 1a with 2b–d bearing poly(benzyl ether) dendron units acts as an efficient organocatalyst for the oxidative transformation of sulfides to the corresponding sulfoxides under mild conditions.     

(2-Halogeno-5-pyridyl)dimethyl(oxiran-2-ylmethyl)silanes: New potential building blocks for the synthesis of silicon-containing drugs

(2-Fluoro-5-pyridyl)dimethyl(oxiran-2-ylmethyl)silane (1a) and (2-chloro-5-pyridyl)dimethyl(oxiran-2-ylmethyl)silane (1b) were prepared in two-step syntheses, starting from allylchlorodimethylsilane. Compounds 1a and 1b were characterized by elemental analyses and NMR studies. With the synthesis of 1a and 1b, new potential building blocks for the synthesis of silicon-containing drugs have been made accessible.     

Structural optimization of thiophene-(N-aryl)pyrrole-thiophene-based metal-free organic sensitizer for the enhanced dye-sensitized solar cell performance

In this study, we prepared thiophene-(N-aryl)pyrrole-thiophene (TPT)-based two new metal-free organic sensitizers (TPTDYE 2 and TPTDYE 3) with the aim of improving the dye-sensitized solar cell (DSSC) performance of recently reported TPT-based organic sensitizer (TPTDYE 1). The molecular structure of TPTDYE 1 was tuned by decreasing the distance between the donor and acceptor groups (TPTDYE 2) or by introducing a fluoride atom on the phenyl ring near to the electron accepting cyanoacrylic acid group (TPTDYE 3). The photophysical and electrochemical studies of the newly synthesized sensitizers revealed that their absorption and energy levels were significantly altered compared to those of TPTDYE 1. The DSSC performance of each of sensitizers TPTDYE 2 and TPTDYE 3 was investigated with and without coadsorbent and compared with those of TPTDYE 1 and standard N719. Between the two DSSCs, the one sensitized by TPTDYE 2 offered greatly improved solar to electrical energy conversion efficiency of 6.85% without coadsorbent and 7.06% with coadsorbent. The overall conversion efficiency of the DSSC sensitized by TPTDYE 2 without and with coadsorbent was found to be improved by 32% and 20%, respectively, compared with that of the DSSC sensitized by TPTDYE 1 and almost equal (98.7%) to that of the standard cell prepared from N719 under an identical condition.     

Chromium imine and amine complexes as homogeneous catalysts for the trimerisation and polymerisation of ethylene

Cr(III) complexes of tridendate imine and amine ligands with N, P, O, S donor atoms 1 and 2 have been prepared and tested as catalysts in the oligomerisation and polymerisation of ethylene giving excellent selectivity towards 1-hexene and polymerisation to polyethylene when activated with cocatalysts. X-ray structure analyses of the precatalysts 1a-c, 1i, and 2b are investigated. The metal-ligand binding in 1a and 1b is nearly the same, which leads to similar catalytic activities of these precatalysts.     

Palladium and nickel complexes of (P,N)-ligands based on quinolines: Catalytic activity for polymerization and oligomerization

Four (P,N)-ligands (1-4) with different steric and electronic properties were synthesized. They were used to prepare the monocationic palladium complexes [Pd(P,N)(CH₃)(NCCH₃)](PF₆) (9-12). The structures of the newly prepared ligand 3 and the neutral palladium complex [Pd(P,N)(CH₃)Cl] (10) were analysed by X-ray. The catalytic activity of the palladium complexes toward the copolymerization of styrene and ethylene with CO was low or non-existent. The nickel complexes [Ni(P,N)(1-naphthyl)Cl] (13-16), modified with the ligands 1-4, were prepared and their catalytic activity toward ethylene oligomerization was studied. They showed high activity at ambient temperature and low ethylene pressure (1-12 bar) in the presence of MAO.     

From bis(silylamino)tin dichlorides via di(1-alkynyl)-bis(silylamino)tin to new heterocycles by 1,1-organoboration

Bis(silylamino)tin dichlorides 1 [X₂SnCl₂ with X=N(Me₃Si)₂ (a), N(9-BBN)SiMe₃ (b), N(^tBu)SiMe₃ (c), and N(SiMe₂CH₂)₂ (d)] were prepared from the reaction of two equivalents of the respective lithium amides (Li-a-d) with tin tetrachloride, SnCl₄, or from the 1:1 reaction of the respective bis(amino)stannylene with SnCl₄. The compounds 1 react with two equivalents of lithium alkynides LiCCR¹ to give the di(1-alkynyl)-bis(silylamino)tin compounds X₂Sn(CCR¹)₂, 2 (R¹=Me), 3 (R¹=^tBu), and 4 (R¹=SiMe₃). Problems were encountered, mainly with LiCC^tBu as well as with 1b, since side reactions also led to the formation of 1-alkynyl-bis(silylamino)tin chlorides 5-7 and tri(1-alkynyl)(silylamino)tin compounds 8 and 9. 1,1-Ethylboration of compounds 2-4 led to stannoles 10, 11, and in the case of propynides, also to 1,4-stannabora-2,5-cyclohexadiene derivatives 12. The molecular structure of the stannole 11b (R¹=SiMe₃) was determined by X-ray analysis. The reaction of 2a and d with triallylborane afforded novel heterocycles, the 1,3-stannabora-2-ethylidene-4-cyclopentenes 14. These reactions proceed via intermolecular 1,1-allylboration, followed by an intramolecular 1,2-allylboration to give 14, and a second intramolecular 1,2-allylboration leads to the bicyclic compounds 15.     

New group 14 element(IV) β-diiminates and a Sn(II) analogue

Seven group 14 element(IV) compounds 2-7 have been prepared, derived either (2-5) from the potassium β-diketiminate K(L) [L = {N(Ar)C(Me)}₂CH, Ar = C₆H₃Prⁱ₂-2,6] (1) or the known lithium β-dialdiminate Li(L′)] [L′ = {N(Ar)C(H)}₂CPh, Ar = C₆H₃Prⁱ₂-2,6]. Treatment of 1 with Bu^tC(O)Cl, Me₃SiCl, Ph₃SnCl, or Me₃SnCl afforded {N(Ar)C(Me)}₂C(H)C(O)Bu^t (2), [ArNC(Me)C(H)C(Me)N(Ar)SiMe₃] (3), [HN(Ar)C(Me)C(H)C(CH₂SnPh₃)N(Ar)] (4), or (5), respectively. Compounds 4 and 5 are remarkable as they have arisen from a tautomer of 1; crystalline centrosymmetric 5 has a fused tricyclic structure, a central eight-membered ring flanked by two six-membered rings. The compounds [GeCl₂(L′)(OGeCl₃)] (6) or [SnCl(L′)Me₂] (7), the first group 14 metal β-dialdiminates, were obtained from Li(L′) and (GeCl₃)₂O or Me₂SnCl₂, respectively. The Sn(II) compound SnCl(L′) (8) was prepared from SnCl₂ and K(L′). The molecular structures of the crystalline compounds 3-8 are reported.     

Boron coordination compounds derived from 2-phenyl-benzimidazole and 2-phenyl-benzotriazole bidentate ligands

The syntheses and structural analyses of a series of boron heterocycles derived from 2-(1H-benzimidazol-2-yl)-phenylamine (1), 2-(1H-benzimidazol-2-yl)-phenol (2), 2-(1H-benzimidazol-2-yl)-benzenedisulfide (3), 2-[3-(1,1,1,3,-tetramethyl-butyl)-phenyl]-2H-benzotriazole (4), 2-[3,5-bis-(1-methyl-1-phenylethyl)-phenyl]-2H-benzotriazole (5) and (C₆H₅)₂BOH or BF₃·OEt₂ are reported. The new boron compounds: diphenyl-[2-(1H-benzimidazol-2-yl-κN)-phenylamide-κN]-boron (6), diphenyl-[2-(1H-benzimidazol-2-yl-κN)-phenolate-κO]-boron (7), diphenyl-[2-(1H-benzimidazol-2-yl-κN)-benzenethiolate-κS]-boron (8), diphenyl-[2-(2H-benzotriazol-2-yl-κN)-4-(1,1,3,3-tetramethyl-butyl)-phenolate-κO]-boron (9), diphenyl-[2-(2H-benzotriazol-2-yl-κN)-4,6-(1-methyl-1-phenylethyl)-phenolate-κO]-boron (10), difluoro-[2-(1H-benzimidazol-2-yl-κN)-phenolate-κO]-boron (11), difluoro-[2-(2H-benzotriazol-2-yl-κN)-4-(1,1,3,3-tetramethylbutyl)-phenolate-κO]-boron (12) and difluoro-[2-(2H-benzotriazol-2-yl-κN)-4,6-(1-methyl-1-phenylethyl)-phenolate-κO]-boron (13) have four fused rings, with boron included in a six-membered ring and bound to N, O or S atoms and strongly coordinated by a nitrogen atom from the imidazole or triazole rings. Their structures are zwitterionic, with a negative charge on the boron and a delocalized positive charge on the ligand. Compounds 6-12 were studied by NMR, IR, mass spectrometry, and 6-10 and 12 by X-ray diffraction analyses.     

Triphenyl lead, tin and germanium coordination compounds derived from 9H-3-thia-1,4a,9-triaza-fluorene-2,4-dithione

Reactions of potassium 4-thioxo-3-thia-1,4a,9-triaza-fluorene-2-thiolate with Ph₃PbCl, Ph₃SnCl and Ph₃GeCl provided the corresponding metal pentacoordinated compounds 2-4. Addition of THF afforded their hexacoordinated derivatives (5-7). Adducts of 2 and 3 with DMSO (8, 10), pyridine (9, 11), Ph₃PO (12, 14) CH₃OH (13, 15), respectively were synthesized. Compound 2 afforded the H₂O adduct (16). In all cases the metal atom is chelated by the ligand through a covalent bond with S2 and a coordination bond with N1 forming four membered rings. Compounds were identified by ¹H, ¹³C, ¹⁵N, ¹¹⁹Sn and ²⁰⁷Pb. X-ray diffraction structures of 2, 3, 8, 9, 11, 14 and 16 were obtained.     

Synthesis of fluorinated geminal diisocyanides stabilized on a transition metal

Chromium complexes of the geminal diisocyanides bis(pentacarbonyl)-μ-2,2-diisocyano-1,1,1,3,3,3-hexafluoropropane)dichromium 1a and bis(pentacarbonyl)-μ-2,2-diisocyano-1,1,1,3,3-pentafluorobutane)dichromium 1b were obtained by radical alkylation of pentacarbonylcyanochromate besides pentacarbonyl(2-isocyano-1,1,1,3,3,3-hexafluoropropane)chromium 2a and pentacarbonyl(2-isocyano-1,1,1,3,3-pentafluorobutane)chromium 2b, respectively. Pentacarbonyl(2-isocyano-1,1,1,2,3,3,3-heptafluoropropane)chromium 2c was prepared analogously. The crystal and molecular structures of 1a and b were determined by X-ray diffraction.     

Cobalt(II), nickel(II) and copper(II) compounds derived from template reactions of enantiomerically pure 2-amino-thiazoles

Herein we report the syntheses and structural analyses of three coordination compounds Co(L)₂ (3), Ni(L)₂, (4) and Cu(L)₂ (5) (L = bis[(4R,5R)-4-methyl-5-phenyl-4,5-dihydro-thiazol-2-yl]-amine) prepared by template reactions from the optically active ligand (4R,5R)-4-methyl-5-phenyl-4,5-dihydro-thiazol-2-yl-amine (1) and CoCl₂·6H₂O, NiBr₂·3H₂O or Cu(OAc)₂·H₂O The template reactions involve the condensation of two molecules of thiazol-2-yl-amine and elimination of one NH₃. The resulting bidentate ligand coordinates to the metal ion through the imine nitrogen atoms forming a six-membered ring, presenting an electronic delocalization which averages the four M–N bond lengths. The distorted tetrahedral geometry of the metal atoms gives place to complex electronic spectra for compounds 3–5. A mixed ionic compound (6) formed by three cations (4S,5S)-3,4-dimethyl-5-phenyl-thiazolidin-2-ylidene ammonium, one dianion tris-(thiocyano)bromide cobaltate and one bromide, obtained from reaction of (4S,5S)-3,4-dimethyl-5-phenyl-thiazolidin-2-ylidene ammonium thiocyanate (2) and CoBr₂ is also described. Compounds 3–6 were characterized in the solid state by UV–Vis–NIR and IR spectroscopy, mass spectrometry and X-ray diffraction analyses. Metal···H–C, S···H–C interactions were observed in 3–6, whereas in 6, also Br···H–N, Br···H–C and Br···S, S···S short contacts were found.     

Synthesis and binding ability of bile acid-based receptors for recognition of flavin analogues

Novel cholaphanes 6a,b, based on lithocholic and deoxycholic acids, were synthesised through 3a,b by a sequence of reactions involving Cs-salt methodology of macrocyclisation. Cholaphanes 6a,b and acyclic steroidal receptors 3a,b bind flavin analogues via three hydrogen bonds in CHCl₃.     

Synthesis and X-ray crystallographic studies of novel proton-ionizable nitro- and halogen-substituted acridono-18-crown-6 chromo- and fluorogenic ionophores

Starting from acridono-18-crown-6 ligand 1 (Fig. 1) seven new proton-ionizable chromogenic and fluorogenic ionophores 2-8 (Fig. 1) containing NO₂ group(s) and/or Br or Cl atom(s) in the aromatic rings were prepared by electrophilic substitution. The precursor macrocycle 1 was obtained by a modification of the reported procedure which made chromatography unnecessary in purification and gave higher yield. X-ray crystallographic studies of the complexes of acridono-18-crown-6 type ligands 1, 2, 3, 6 and 8 show that the proton-ionizable units are in the acridone tautomeric form and that the ligands invariably bind a water molecule in their cavities by multipodal hydrogen bonding. In two cases (6 and 8) an additional DMF solvent molecule is also bound at the crown perimeter in the solid state.     

Preparation and recognition performance of uric acid-imprinted material prepared with novel surface imprinting technique

Acrylonitrile (AN) was first graft-polymerized on the surfaces of crosslinked polyvinyl alcohol (CPVA) microspheres by initiating of cerium salt, and then the grafted polyacrylonitrile (PAN) was transformed to polyamidoxime (PAO) via amidoximation transform reaction, resulting in the functional microspheres PAO/CPVA. By adopting the novel surface-molecular imprinting technique put forward by us, uric acid molecule-imprinted material MIP-PAO/CPVA was prepared with glutaraldehyde as crosslinking agent The binding character of MIP-PAO/CPVA towards uric acid was investigated in depth with both batch and column methods and using guanine as a contrast substance whose chemical structure is similar to uric acid to a certain extent. The experimental results show that the surface imprinted material MIP-PAO/CPVA has excellent binding affinity (a great binding capacity of 104 mg/g) and high recognition selectivity for the template molecule, uric acid. The selectivity coefficient of PAO/CPVA microspheres (non-imprinted material) for uric acid relative to guanine is only 1.273, displaying no recognition selectivity for uric acid. However, after imprinting, the selectivity coefficient of MIP-PAO/CPVA for uric acid in respect to guanine is remarkably enhanced to 14.00, displaying the excellent recognition selectivity and binding affinity towards uric acid molecules.     

Synthesis of mono- and binuclear dioxomolybdenum(VI) complexes derived from N(4)-substituted thiosemicarbazones: X-ray crystal structures of [(MoO2L)2], [MoO2Lpy] and [MoO2Lpy]

Four molybdenum(VI) thiosemicarbazonato complexes have been synthesized and characterized. The dinuclear complexes [(MoO₂L¹)₂] (1) and [(MoO₂L²)₂] (3) have been prepared by the reaction of [MoO₂(acac)₂] with 2-hydroxyacetophenone N(4)-cyclohexyl (H₂L¹) and N(4)-phenyl (H₂L²) thiosemicarbazones in alcoholic medium. Mononuclear dioxomolybdenum(VI) complexes of the type [MoO₂L¹py] (2) and [MoO₂L²py] (4) have been prepared by the reaction of 1 or 3 with pyridine (py) in alcoholic medium. In all the complexes, molybdenum is coordinated by two terminal oxo-oxygen atoms, (O_t), oxygen, nitrogen and sulfur atoms from the principal ligand and by an oxygen atom from the second unit in 1, and by a nitrogen atom from pyridine in complexes 2 and 4. All complexes have been spectroscopically characterized. The molecular structures of complexes 1, 2 and 4 have been determined by the single crystal X-ray diffraction method.     

Syntheses of a stable tristibine and of related antimony compounds with the 2,6-dimesitylphenyl (Dmp) substituent

DmpSbBr₂ (Dmp = 2,6-Mes₂C₆H₃) (1) is obtained by the reaction of DmpMgBr with SbCl₃. The reaction of 1 with KI in ethanol gives DmpSbI₂ (2). Dmp(Ph)SbBr (3) is prepared from DmpMgBr and PhSbCl₂. Compound 1 or 3 react with LiAlH₄ to form DmpSbH₂ (4) or Dmp(Ph)SbH (5). Compound 4 reacts with MeI in presence of DBU to give Dmp(Me)SbH (6). DmpSb(SbMe₂)₂ (7) is obtained from 4 and Me₄Sb₂. Elimination of hydrogen from 6 gives [Dmp(Me)Sb]₂ (8). Hydrolysis of 3 gives Dmp(Ph)SbOH (9). The molecular structures of 1-3, 5, 8 and 9 were determined by X-ray diffraction on single crystals.     

Syntheses of aza and fluorine-substituted 3-(piperidin-4-yl)-4,5-dihydro-1H-benzo[d][1,3]diazepin-2(3H)-ones

A practical and expedient synthesis of the title compounds is described. They were prepared by Stille reaction of nitro halopyridines 4 or nitro fluro-halobenzenes 10, followed by Michael addition of tert-butyl 4-aminopiperidine-1-carboxylate to the resulting activated vinyl compounds 5 and 11, hydrogenation (-NO₂→-NH₂), cyclic urea formation, Boc removal, and HCl salt formation. However, N3 and F1 analogs could not be made by this general strategy. Activated vinyl compounds 5a and 5d when reacted with tert-butyl 4-aminopiperidine-1-carboxylate did not stop at the desired Michael addition stage; but proceeded to produce azaindolines 8 and 9. Michael addition did not occur to compound 11d; instead, the fluorine atom was displaced.     

Synthesis and characterization of some novel cadmium(II) complexes with 3-hydroxypicolinic acid (3-OHpicH): Crystal and molecular structures of [CdI(3-OHpic)(3-OHpicH)(H2O)]2, [Cd(3-OHpic)2(H2O)2] and [Cd(3-OHpic)2]n

Cadmium(II) complexes of 3-hydroxypicolinic acid, namely [CdI(3-OHpic)(3-OHpicH)(H₂O)]₂ (1), [Cd(3-OHpic)₂(H₂O)₂] (2) and [Cd(3-OHpic)₂]_n (3) were prepared and characterized by spectroscopic methods (IR, NMR) and their molecular and crystal structures were determined by X-ray crystal structure analysis. Complexes 1 and 2 were prepared in similar reaction conditions using different cadmium(II) salts: cadmium(II) iodide and cadmium(II) acetate dihydrate, respectively, while 3 was prepared by recrystallization of 2 from N,N-dimethylformamide solution. Various coordination modes of 3-OHpicH in 1–3 were established in the solid state: bidentate N,O-chelated mode in 1 and 2, monodentate mode through the carboxylate O atom from zwitterionic ligand in 1 and bidentate N,O-chelated and bridging mode in 3. In the DMF solution of all prepared complexes, only monodentate mode of 3-OHpicH binding to cadmium(II) through the carboxylate O atom was established by ¹H, ¹³C, ¹⁵N and ¹¹³Cd NMR spectroscopy.