Enhanced photopolymerization of dimethacrylates with ketones,amines, and iodonium salts: The CQ system

The kinetics and mechanism of the photopolymerization of dimethacrylates using three‐component initiation systems consisting of camphorquinone (CQ), diphenyliodonium hexafluorophosphate (Ph₂IPF₆), and either N,N,3,5‐tetramethylaniline (TMA) or N,N‐dimethylbenzylamine or triethylamine were studied by photo‐DSC and UV‐visible spectroscopy. The effect of monomer structure on the curing kinetics and photobleaching were also investigated. Photo‐DSC studies showed fivefold increases in polymerization rate when all three components were present and the kinetics followed the trend: CQ/amine/Ph₂IPF₆ ? CQ/amine > CQ/Ph₂IPF_6.. For both CQ/amine/Ph₂IPF₆ and CQ/amine systems, the CQ was rapidly photobleached during the photo‐DSC timescale but for the systems without amine there was an induction stage before CQ photobleaching was evident. Studies of the effect of monomer type on the photobleaching rate show that the photobleaching behavior was independent of monomer structure. Three photoinitiation mechanisms have been proposed. The reaction mechanism of the CQ/amine/Ph₂IPF₆ system involves the reduction of the excited CQ molecule by the amine to form ketyl and aminoalkyl radicals, followed by the irreversible oxidation of the amine, and to a lesser extent, the ketyl radical by the iodonium salt, to form an initiating radical. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A photo‐oxidizable kinetic pathway of three‐component photoinitiator systems containing porphrin dye (Zn‐tpp), an electron donor and diphenyl iodonium salt

A series of kinetic experiments were conducted involving visible‐light activated free radical polymerizations with three‐component photoinitiators and 2‐hydroxyethyl methacrylate (HEMA). Three‐component photoinitiator systems generally include a light‐absorbing photosensitizer (PS), an electron donor and an electron acceptor. To compare kinetic efficiency, we used thermodynamic feasibility and measured kinetic data. For this study, 5,10,15,20‐tetraphenyl‐21H,23H‐porphyrin zinc (Zn‐tpp) and camphorquinone (CQ) were used as the PSs. The Rehm‐Weller equation was used to verify the thermodynamic feasibility for the photo‐induced electron transfer reaction. Using the thermodynamic feasibility, we suggest two different kinetic mechanisms, which are (i) photo‐reducible series mechanism of CQ and (ii) photo‐oxidizable series mechanism of Zn‐tpp. Kinetic data were measured by near‐IR spectroscopy and photo‐differential scanning calorimetry based on an equivalent concentration of excited state PS. We report that the photo‐oxidizable series mechanism using Zn‐tpp produced dramatically enhanced conversions and rates of polymerizations compared with those associated with the photo‐reducible series mechanism using CQ. It was concluded from the kinetic results that the photo‐oxidizable series mechanism efficiently retards back electron transfer and the recombination reaction step. In addition, the photo‐oxidizable series mechanism provides an efficient secondary reaction step that involves consumption of the dye‐based radical and regeneration of the original PS. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3131–3141, 2009     

The role of diphenyl iodonium salt (DPI) in three‐component photoinitiator systems containing methylene blue (MB) and an electron donor

Three‐component initiators generally include a light‐absorbing photosensitizer, an electron donor that is often an amine, and the third component, which is usually an iodonium salt. To characterize the role of diphenyl iodonium chloride (DPI) in three‐component photoinitiator systems containing methylene blue (MB) as the photosensitizer, a systematic series of electron donors was used. The Rhem–Weller equation was used to verify the thermodynamic feasibility for photo‐induced electron transfer from the electron donors to the MB. Comparison of the photopolymerization rates of each two‐component initiator system (containing the photosensitizer and amine) to those of the corresponding three‐component system (with the addition of (DPI) allowed fundamental information regarding the role of the DPI to be obtained. It was concluded that the DPI enhances the photopolymerization kinetics in two ways: (1) it consumes an inactive MB neutral radical and produces an active phenyl radical, thereby regenerating the original methylene blue, and (2) it reduces the recombination reaction of the MB neutral radical and amine radical/cation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5863–5871, 2004     

Combination of transition metal carbonyls and silanes: New photoinitiating systems

The recently developed silyl radical chemistry is used in combination with transition metal carbonyls MC (dimanganese(0) decacarbonyl; dirhenium decacarbonyl; cyclopentadienyl iron(II) dicarbonyl dimer) for both free radical promoted cationic photopolymerization (FRPCP) and free radical photopolymerization (FRP). The newly developed photoinitiating systems (MC/silane and MC/silane/iodonium salt) are highly efficient under air. Photopolymerization profiles obtained upon a visible light irradiation delivered by a xenon lamp show that high conversion can be easily achieved after a 400 s exposure. Sunlight irradiations under air can also lead to tack free coatings. The processes associated with the metal carbonyl radical/silane interactions are investigated by Laser Flash Photolysis (LFP) and ESR‐Spin Trapping (ESR‐ST) experiments. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1830–1837, 2010     

Photochemistry and initiation behavior of phenylethynyl onium salts as cationic photoinitiators

Phenyl(phenylethynyl)iodonium hexafluorophosphate and diphenyl(phenylethynyl)sulfonium hexafluorophosphate were synthesized for application as cationic photoinitiators using simple, straightforward methods. Quantification of the purity of the counterion was determined by FTIR analysis with subsequent mathematical peak deconvolution. Photodecomposition products for direct irradiation were determined in steady state photolysis experiments yielding diphenyl sulfide and phenyl(phenylethynyl) sulfide or iodobenzene, respectively, as main products. Heterolytic cleavage was proposed as main photodecomposition pathway because low yields of phenylacetylene radical recombination products and no photoproducts generated by phenyl radicals, including benzene, were detected. High activity as photoinitiators was verified by photo‐DSC experiments in direct irradiation and in photosensitized initiation using 9,10‐dibutylanthracene, 2‐isopropylthioxanthone, and surprisingly also benzophenone as sensitizers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3419–3430, 2009     

Polymerization kinetics of phosphonic acids and esters using an iodonium initiator

Phosphonic acids are known to be useful monomers in dental restorative materials because of their good potential to provide enhanced adhesion to hydroxyapatite and their high hydrolytic stability. In this study, the photopolymerization of phosphonic acid‐based monomer via the camphorquinone (CQ)/ethyl‐4‐(dimethylaminobenzoate) (EDAB) photoredox system is compared with a ternary system composed of iodonium hexafluorophosphate and CQ/EDAB. Photocalorimetry shows that the ternary system does not provide a significant acceleration of the polymerization with either acrylamide or methacrylate phosphonic acids. The complexation of the iodonium by the phosphonic moiety of the acidic monomers leads to a lowered iodonium reactivity and reduced polarizability of the medium and as a consequence limits the rate enhancement effect normally observed by phosphonic acids on the polymerization rate. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5046–5055     

A mechanistic investigation of a three‐component radical photoinitiator system comprising methylene blue,N‐methyldiethanolamine,and diphenyliodonium chloride

Three‐component systems, which contain a light‐absorbing species (typically a dye), an electron donor (typically an amine), and a third component (usually an iodonium salt), have emerged as efficient, visible‐light‐sensitive photoinitiators. Although three‐component systems have been consistently found to be faster and more efficient than their two‐component counterparts, these systems are not well understood and a number of distinct mechanisms have been reported in the literature. In this contribution, photodifferential scanning calorimetry and in situ, time‐resolved, laser‐induced, steady‐state fluorescence spectroscopy were used to study the initiation mechanism of the three‐component system methylene blue, N‐methyldiethanolamine and diphenyliodonium chloride. Kinetic studies based upon photodifferential scanning calorimetry reveal a significant increase in polymerization rate with increasing concentration of either the amine or the iodonium salt. However, the laser‐induced fluorescence experiments show that while increasing the amine concentration dramatically increases the rate of dye fluorescence decay, increasing the DPI concentration actually slows consumption of the dye. We concluded that the primary photochemical reaction involves electron transfer from the amine to the dye. We suggest that the iodonium salt reacts with the resulting dye‐based radical (which is active only for termination) to regenerate the original dye and simultaneously produce a phenyl radical (active in initiation) derived from the diphenyliodonium salt. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2057–2066, 2000     

A mechanistic investigation of the three‐component radical photoinitiator system Eosin Y spirit soluble,N‐methyldiethanolamine,and diphenyliodonium chloride

Photo‐DSC and in situ, time‐resolved, laser‐induced, steady‐state fluorescence spectroscopy were used to study the initiation mechanism of the three‐component system: Eosin Y spirit soluble (EYss), N‐methyldiethanolamine, and diphenyliodonium chloride. Kinetic studies based on photo‐DSC revealed that the fastest polymerization occurred when all three components were present (the next fastest was with the dye/amine pair, and the slowest was with the dye/iodonium pair). However, the laser‐induced fluorescence experiments showed that the pairwise reaction between the eosin and iodonium bleaches the dye much more rapidly than does the reaction between the eosin and amine. We concluded that although a direct eosin/amine reaction can produce active radicals in the three‐component system, this reaction is largely overshadowed by the eosin/iodonium reaction, which does not produce active radicals as effectively. We proposed that the amine reduces the oxidized dye radical formed in the eosin/iodonium reaction back to its original state as well as the simultaneous production of an active initiating amine‐based radical. Because of the difference in the pairwise reaction rates for eosin/amine and eosin/iodonium, it is likely that this regeneration reaction was the primary source of active radicals in the three‐component eosin/amine/iodonium system. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 715–723, 2001     

Curcumin: A naturally occurring long‐wavelength photosensitizer for diaryliodonium salts

Curcumin, a naturally occurring, intensely yellow dye extracted from the spice turmeric, is an efficient photosensitizer for diaryliodonium salt photoinitiators at wavelengths ranging from 340 to 535 nm. With curcumin as a photosensitizer, it is possible to carry out the cationic photopolymerization of a wide variety of epoxide, oxetane, and vinyl monomers with long‐wavelength UV and visible light. An example of the photopolymerization of an epoxide monomer with ambient solar irradiation is provided. Several other curcumin analogues were synthesized, and their use as photosensitizers is examined. With such photosensitizers, the range of spectral sensitivity can be extended well into the visible region of the electromagnetic spectrum. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5217–5231, 2005     

A new visible light sensitive photoinitiator system for the cationic polymerization of epoxides

This communication reports the development of an efficient three‐component visible light sensitive photoinitiator system for the cationic ring‐opening photopolymerization of epoxide monomers and epoxide functional oligomers. The photoinitiator system consists of camphorquinone in combination with a benzyl alcohol to generate free radicals by the absorption of visible light. Subsequently, the radicals participate in the free radical chain induced decomposition of a diaryliodonium salt. The resulting strong Brønsted acid derived from this process catalyzes the cationic ring‐opening polymerization of a variety of epoxide substrates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 866–875, 2009     

1,2-Diketones as photoinitiators of both cationic and free-radical photopolymerization under UV (392 nm) or Blue (455 nm) LEDs

The photoinitiation abilities of three 1,2-diketones [i.e., acenaphthenequinone ( ANPQ ), aceanthrenequinone ( AATQ ), and 9,10-phenanthrenequinone ( PANQ )]-based photoinitiating systems [PISs, with additives such as iodonium salt, N-vinylcarbazole (NVK), tertiary amine, and phenacyl bromide (R-Br)] for cationic photopolymerization and free-radical photopolymerization under the irradiation of ultraviolet (UV; 392 nm) or blue (455 nm) light-emitting diode (LED) bulb are investigated. All 1,2-diketones studied exhibit ground state absorption that match with the emission spectra of UV (392 nm) or blue LED (455 nm) better than that of the well-known blue-light-sensitive photoinitiator camphorquinone (CQ). In particular, AATQ /iodonium salt/NVK can show high photoinitiating ability (with epoxide conversion yield >70%) under the UV light irradiation due to the effect of NVK. In addition, 1,2-diketone/iodonium salt (and optional NVK) systems are capable of initiating free-radical photopolymerization of methacrylates, with conversions of 50–58%. Furthermore, some 1,2-diketone/tertiary amine (and optional R-Br) combinations are found to demonstrate high efficiency to initiate free-radical photopolymerization, and 71% of methacrylate conversion can be achieved with PANQ /tertiary amine/R-Br PIS. Some 1,2-ketone-based PISs can even exhibit higher efficiency than the CQ-based systems. The photochemical mechanism of the radical generation from the 1,2-diketone-based PISs is investigated and found to be consistent with the related photopolymerization efficiency. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 792–802     

Unusually highly efficient,singlet state,visible light photoinitiators based on styrylbenzimidazolium phenyltributylborate photoredox pairs for vinyl monomers free radical polymerization

In this article, hemicyanine dye–borate complexes, for example, 1,3‐dimethyl‐2‐[4‐(N,N‐dialkylamino)styryl]benzimidazolium phenyl‐tri‐n‐butylborates, were employed as the novel, very effective photoinitiators operating in the visible light region. The influence of the sensitizers and electron donor structure on the photopolymerization kinetics of multiacrylate monomer was investigated by photo‐DSC. The maximum photopolymerization quantum yield measured for 2‐ethyl‐2‐(hydroxymethyl)‐1,3‐propanediol triacrylate (TMPTA) was about 67 for sample of thickness of about 1 mm under 100 mW/cm² laser irradiation. It was found that the polymerization rate and the final conversion degree were depended on the dye structure. Moreover, the photoinitiating systems described gave a double bond conversion higher than the photoinitiator possessing as chromophore RBAX (Rose Bengal derivative), the common triplet state initiator. Additionally, the rate of photopolymerization depends on ΔG_el of electron transfer between borate anion and styrylbenzimidazolium cation. This latter value was estimated for a series of styrylbenzimidazolium borate salts. The relationship between the rate of polymerization and the free energy of activation for electron transfer reaction gives the dependence predicted by the classical theory of electron transfer. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4119–4129, 2009     

Synthesis and study of iodonium borate salts as photoinitiators

Iodonium butyltriphenylborate salts (A I⁺ Ar′Ph₃B⁻ R), (Bu) were found to be more efficient than iodonium tetraphenylborate salts (RPh) when used as photoinitiators for the polymerization of acrylates. Relative photodecomposition rates were also different. It was found from a study of the photoreaction of iodonium borate salts with a model monomer, methyl methacrylate, that iodonium butyltriphenylborate salts simultaneously produce a butyl radical from the borate anion and an aryl radical from the iodonium cation upon irradiation. Both radicals initiate polymerization. Iodonium tetraphenylborate salts were found to release an aryl radical, but only from the iodonium cation. Iodonium borate salts exhibit strong absorption below 300 nm with a tail absorption above 400 nm. Thus, iodonium butyltriphenyl borate salts are efficient photoinitiators even when used with visible light. When a photosensitizer such as 5,7-diiodo-3-butoxy-6-fluorone is employed, iodonium butyltriphenylborate salts are rendered much more efficient for visible light photopolymerization. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1667–1677, 1998     

Oxygen scavengers and sensitizers for reduced oxygen inhibition in radical photopolymerization

Oxygen inhibition in the free‐radical photopolymerization of (meth)acrylates is one of the most challenging problems in thin film application. Apart from the utilization of an inert gas atmosphere, additives reducing oxygen inhibition due to production of new propagating centers are used. In the present study, a more straightforward approach to reduce oxygen inhibition by photosensitized generation of singlet oxygen and subsequent scavenging of these species by selective singlet oxygen trappers was investigated. The potential of 1,2‐dions conventionally used as type‐II photoinitiators for visible light polymerization to function as singlet oxygen generators was verified in sensitized steady state photooxidation experiments in solution. A set of furan and anthracene derivatives were tested as oxygen scavengers and their corresponding relative reaction rates were determined. The ability of these sensitizer/scavenger systems to reduce oxygen inhibition in practical applications was studied in photo‐DSC‐experiments. In thin film polymerization (investigated by ATR‐FTIR), the formation of insufficiently cured surfaces could be prevented by the usage of singlet oxygen trappers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6916–6927, 2008     

Combination of radical and cationic photoprocesses for the single‐step synthesis of organic‐inorganic hybrid films

Nanocomposite materials prepared from radically photocurable hybrid sol–gel precursors have been widely developed within the last decade, especially to devise novel optical devices and coatings. For their synthesis, a preferential route has involved in the successive sol–gel process of acrylate trialkoxysilane precursors followed by radical photopolymerization. In contrast, this work presents an original one‐step synthesis based on the association of two different photoinitiators (PIs) in the same formulation: the photolysis of a hydroxyphenylketone (radical PI) affords polyacrylate chains while that of a diaryl iodonium salt (cationic PI) generates powerful superacids catalyzing the sol–gel reactions of the alkoxy functions. The behavior of methacrylate and acrylate trimethoxysilane precursors was compared to highlight the effect of the organic moiety functionality on the reaction kinetics (Fourier transform infrared spectroscopy) and the film microstructure (¹³C and ²⁹Si solid‐state nuclear magnetic resonance). Interestingly, evidence of local organization in these hybrid films was also given by X‐ray analysis. In a last part, their thermomechanical properties were discussed thoroughly using a range of techniques: DSC, scratch‐resistance test, nanoindentation. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4150–4158, 2010     

Kinetic pathway investigations of three‐component photoinitiator systems for visible‐light activated free radical polymerizations

Three‐component photoinitiator systems generally include a light‐absorbing photosensitizer (PS), an electron donor, and an electron acceptor. To investigate the key factors involved with visible‐light activated free radical polymerizations involving three‐component photoinitiators and 2‐hydroxyethyl methacrylate, we used thermodynamic feasibility and kinetic considerations to study photopolymerizations initiated with either rose bengal or fluorescein as the PS. The Rehm–Weller equation was used to verify the thermodynamic feasibility for the photo‐induced electron transfer reaction. It was concluded that key kinetic factors for efficient visible‐light activated initiation process are summarized in two ways: (1) to retard back electron transfer and recombination reaction steps and (2) to use a secondary reaction step for consuming dye‐based radical and regenerating the original PS (dye). Using the thermodynamic feasibility and kinetic data, we suggest three different kinetic mechanisms, which are (i) photo‐reducible series mechanism, (ii) photo‐oxidizable series mechanism, and (iii) parallel‐series mechanism. Because the photo‐oxidizable series mechanisms most efficiently allow the key kinetic factors, this kinetic pathway showed the highest conversion and rate of polymerization. The kinetic data measured by near‐IR and photo‐differential scanning calorimeter verified that the photo‐oxidizable series mechanism provides the most efficient kinetic pathway in the visible‐light activated free radical polymerizations. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 887–898, 2009     

Iron complexes as photoinitiators for radical and cationic polymerization through photoredox catalysis processes

Six iron complexes (FeCs) with various ligands have been designed and synthesized. In combination with additives (e.g., iodonium salt, N‐vinylcarbazole, amine, or chloro triazine), the FeC‐based systems are able to efficiently generate radicals, cations, and radical cations on a near UV or visible light‐emitting diode (LED) exposure. These systems are characterized by an unprecedented reactivity, that is, for very low content 0.02% FeC‐based systems is still highly efficient in photopolymerization contrary to the most famous reference systems (Bisacylphosphine oxide) illustrating the performance of the proposed catalytic approach. This work paves the way for polymerization in soft conditions (e.g., on LED irradiation). These FeC‐based systems exhibit photocatalytic properties, undergo the formation of radicals, radical cations, and cations and can operate through oxidation or/and reduction cycles. The photochemical mechanisms for the formation of the initiating species are studied using steady state photolysis, cyclic voltammetry, electron spin resonance spin trapping, and laser flash photolysis techniques. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 42–49     

PHOTOPOLYMERIZATION INITIATED BY DIMETHYLAMINOCHALCONE/DIPHENYLIODONIUM SALT COMBINATION SYSTEM SENSITIVE TO VISIBLE LIGHT

Several dimethylamino-substituted chalcone (i .e. dimethylaminobenzal acetophenone) (DBA) derivatives with intramolecular charge transfer transition character were used as visible light sensitizers for radical photopolymerization initiated by iodonium salt (DPIO). Initiating radical species is produced from DBA sensitized photolysis of DPIO through the single electron transfer, accompanying the bleaching of DBA, The activity of DBA decreases as a function of substituent attached to phenyl ring in the order: DBA-2 (OCH_3) >DBA-1(H)> DBA-3 (Cl). The kinetic study on photopolymerization of MMA was carried out in CH_3CN solution at 30 ℃by dilatometry. The polymerization rate was determined to be proportional to the concentration with exponents of 0.42, 0.25 and 0.86 for DPIO, DBA-1 and MMA, respectively.     

Radical polymerization activity and mechanistic approach in a new three‐component photoinitiating system

A new three‐component photoinitiating system (based on isopropylthioxanthone ITX, amine AH, and a bifunctional benzophenone–ketosulfone BP‐SK photoinitiator) for acrylate polymerization reactions was investigated through steady‐state photolysis (photodegradation, redox potentials, and acidity release determinations) and time‐resolved laser spectroscopy. The photopolymerization activity has been checked. It is shown that addition of ITX to BP‐SK/AH clearly enhances the efficiency of the photopolymerization of clear or pigmented coatings. This is explained (although, a direct interaction between the triplet state of ITX and BP‐SK occurs to some extents) on the basis of the interaction of BP‐SK with the ketyl radical of ITX. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4531–4541, 2000     

Photocationic and radical polymerizations of epoxides and acrylates by novel sulfonium salts

Novel sulfonium salts [methyl‐, 2‐indany‐, or 1‐ethoxycarbonylethyl methyl‐2‐naphthylsulfonium hexafluorophosphate and 2‐indany‐, 1‐ethoxycarbonylethyl‐, 2‐methyl‐2‐phenylpropyl‐, 2‐phenylpropyl‐, 2‐phenylethyl‐, 2‐(4‐methoxyphenyl)‐ethyl‐, or 3‐(4‐methoxyphenyl)‐2‐propyl methylphenylsulfonium hexafluorophosphates] were synthesized by the reaction of dimethylsulfate and the corresponding sulfides followed by anion exchange with KPF₆. These sulfonium salts could polymerize epoxy monomers at lower temperatures than previously reported for benzylsulfonium salt initiators. In particular, sulfonium salts with naphthyl groups showed higher photoactivity than already reported for di(4‐tert‐butylphenyl)iodonium and triphenylsulfonium hexafluorophosphates. These sulfonium salts showed higher activity in photoradical polymerization and photocationic polymerization. The photopolymerization was accelerated by the addition of 4‐methoxy‐1‐naphthol, N‐ethylcarbazole, 2,4‐dimethylthioxanthone, phenothiazine, and 2‐ethyl‐9,10‐dimethoxyanthracene as photosensitizers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3816–3827, 2003