RAFT synthesis of a water‐soluble triblock copolymer of poly(styrenesulfonate)‐b‐poly(ethylene glycol)‐b‐poly(styrenesulfonate) using a macromolecular chain transfer agent in aqueous solution

Triblock copolymers of poly(styrenesulfonate)‐b‐poly(ethylene glycol)‐b‐poly(styrenesulfonate) with narrow molecular weight distribution (M_w/M_n = 1.28–1.40) and well‐defined structure have been synthesized in aqueous solution at 70 °C via reversible addition‐fragmentation chain transfer polymerization. Poly(ethylene glycol) (PEG) capped with 4‐cyanopentanoic acid dithiobenzoate end groups was used as the macro chain transfer agent (PEG macro‐CTA) for sole monomer sodium 4‐styrenesulfonate. The reaction was controllable and displayed living polymerization characteristics and the triblock copolymer had designed molecular weight. The reaction rate depended strongly on the CTA and initiator concentration ratio [CTA]₀/[ACPA]₀: an increase in [CTA]₀/[ACPA]₀ from 1.0 to 5.0 slowed down the polymerization rate and improved the molecular weight distribution with a prolonged induction time. The polymerization proceeded, following first‐order kinetics when [CTA]₀/[ACPA]₀ = 2.5 and 5.0. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3698–3706, 2007     

Batch emulsion copolymerization of 3‐O‐methacryloyl‐1,2:5,6‐di‐O‐isopropylidene‐α‐D‐glucofuranose and butyl acrylate: Synthesis and properties of the sugar latices

To obtain new polymer latices based on sugar derivative, batch emulsion copolymerizations of 3‐O‐methacryloyl‐1,2:5,6‐di‐O‐isopropylidene‐α‐D ‐glucofuranose (3‐MDG) and n‐butyl acrylate (BA) were carried out at 70 °C, with potassium persulfate as the initiator. 3‐MDG polymerizes faster than BA because of its higher reactivity ratio, r_(3‐MDG) = 1.94 versus r_(BA) = 0.54. The effect of the initial monomer composition on the polymerization rate and the thermal properties of the end copolymers was investigated. The overall rate of polymerization increases by enhancing the sugar content in the initial monomer composition. The glass‐transition temperature is linearly related to the sugar content in the copolymer. The influence of the type of surfactant showed that the particle size increases by changing from ionic to nonionic surfactant. Furthermore, the effect of the added acrylic acid (AA) on the rheological properties suggests that the sugar latices exhibit different non‐Newtonian flows depending on the pH of the latex and on the AA concentration on the particle surface. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 788–803, 2003     

Controlled radical polymerization of 2‐hydroxyethyl methacrylate initiated by photofunctional 2‐(N,N‐diethyldithiocarbamyl)isobutyric acid

We demonstrated that density functional theory calculations provide a reliable and quantitative prediction of the trends in C? S bond dissociation energies using several model compounds as photoinitiator. On the basis of this information, we designed a possible photofunctional initiator for the polymerization of hydrophilic vinyl monomers. Photopolymerization of 2‐hydroxyethyl methacrylate (HEMA) hydrophilic monomer was carried out in ethanol initiated by 2‐(N,N‐diethyldithiocarbamyl)isobutyric acid (DTCA) under UV irradiation. We performed the first‐order time‐conversion plots in this polymerization system, and the straight line in the semilogarithmic coordinates indicated first order in monomer. The molecular weight of the poly(2‐hydroxyethyl methacrylate) (PHEMA) increased with increasing conversion. The molecular weight distribution (M_w/M_n) of the PHEMA was about 1.5. Methyl methacrylate (MMA) could also be polymerized in a living fashion with such a PHEMA precursor as a macroinitiator because PHEMA exhibited a dithiocarbamate (DC) group at its terminal end. This system could be applied to the architecture of amphiphilic block copolymers. It was concluded that these polymerization systems proceeded with controlled radical mechanism. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 76–82, 2004     

Synthesis of hydrophilic polymers in supercritical carbon dioxide in the presence of a siloxane‐based macromonomer surfactant: Heterogeneous polymerization of 1‐vinyl‐2 pyrrolidone

Batch free radical polymerization of 1‐vinyl‐2‐pyrrolidone (VP) in supercritical carbon dioxide (scCO₂) was studied in the presence of a reactive polysiloxane surfactant (PDMS‐mMA). Phase behavior investigation showed that when the initial concentration of the surface active macromonomer was higher than 2.5% w/w with respect to the monomer, the reaction mixture, in the absence of efficient stirring, was initially opaque to the visible light, and it slowly turned to an orange tint. Polymerization experiments carried out with surfactant concentration higher than the aforementioned value proceeded with a fast kinetics, and led to the formation of spherical nanoparticles with almost quantitative yields (higher than 98% with a reaction time lower than 70 min). The effect of the concentration of the surface active macromonomer, the initiator and the monomer, and of the density of the fluid phase on the kinetics of the process and on the morphology of the particles was investigated. A marked decrease of the number‐average diameter of the polymer particles with the surfactant concentration was obtained without any particle agglomeration. A dependence on [Initiator]^?0.16 of the particle diameter was observed. Such scaling law exhibits an exponent higher than any previously reported for dispersion processes and rather close to those foreseeable on the basis of Smith–Harkins kinetics for emulsion polymerization. Collected experimental results strongly suggest that the polymerization of VP in the presence of PDMS‐mMA could proceed with a nucleation mechanism different from that postulated in pure dispersion polymerization stabilized by graft‐forming surfactants. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 173–185, 2004     

Synthesis of nanocylinders consisting of graft block copolymers by the photo‐induced ATRP technique

Photoinduced atom transfer radical polymerizations (ATRP) of t‐butyl methacrylate (BMA) were carried out, initiated by model initiator benzyl N,N‐diethyldithiocarbamate (BDC) in the presence of CuCl/bipyridine (bpy) under UV irradiation. We performed the first‐order time‐conversion plots in this polymerization system, and the straight line in the semilogarithmic coordinates indicated a first‐order in the monomer. The molecular weight of poly(t‐butyl methacrylate) (PBMA) increased in direct proportion to monomer conversion. The molecular weight distribution (M_w/M_n) of PBMA was about 1.3. The initiator efficiency, f, was close to 1.0, which indicated that no side reactions occurred. A copper complex, CuCl/bpy, reversibly activated the dormant polymer chains via a N,N‐diethyldithiocarbamate (DC) transfer reaction such as Cu(DC)Cl/bpy, and it was dynamic equilibrium that was responsible for the controlled behavior of the polymerization of BMA. On the basis of this information, we established a preparation method of nanocylinders consisting of graft block copolymers by grafting from photoinduced ATRP of multifunctional polystyrene having DC pendant groups with vinyl monomers [first monomer, BMA; second monomer, styrene or methyl methcrylate (MMA)]. We have carried out the characterization of such nanocylinders in detail. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 63–70, 2005     

Synthesis of poly(vinyl laurate)‐b‐poly(vinyl stearate) diblock copolymers by cobalt‐mediated radical polymerization in solution

Poly(vinyl laurate) (PVL) and poly(vinyl stearate) (PVS) were synthesized by means of cobalt‐mediated radical polymerization (CMRP). Cobalt(II) diacetylacetonate (Co(acac)₂) was demonstrated to control the radical polymerization of these monomers in solution. Molecular weights up to 15,000 g·mol^?1 were obtained with reasonably low polydispersity indices (PDI < 1.3). The efficiency of the redox initiator [lauroyle peroxide (LPO)/citric acid (CA)] was found to be low (around 10%) as already reported for vinyl acetate. The solvent and temperature were found to have a very weak influence on the initiator efficiency. It appeared that CA played no role in the initiation process that only involved a redox reaction between LPO and Co(acac)₂. PVL‐b‐PVS diblock copolymers could be synthesized using two strategies: (1) Sequential addition, that is, addition of the second monomer (VS) at high conversion of the first one (VL). (2) Macroinitiator technique, that is, isolation of a PVL macroinitiator then polymerization of VS from this cobalt functionalized macroinitiator. Both techniques allowed the synthesis of diblock copolymers with molar masses around 25,000 g·mol^?1 and PDI lower than 1.4. The resulting materials were characterized by DSC, revealing that both blocks exhibit side‐chain crystallinity and phase segregate in the bulk. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and morphology of Fe3O4/polystyrene/poly(isopropylacrylamide‐co‐methyl acrylate acid) magnetic composite latex – 2,2′‐azobis (2‐methylpropionamidine) dihydrochloride as initiator

In this work, Fe₃O₄/polystyrene/poly(N‐isopropylacryl amide‐co‐methylacrylate acid) (Fe₃O₄/PS/P(NIPAAM‐co‐MAA)) magnetic composite latex was synthesized by the method of two stage emulsion polymerization. In this reaction system, 2,2′‐azobis(2‐methyl propionamidine) dihydrochloride (AIBA) was used as initiator to initiate the first stage reaction and second stage reaction. The Fe₃O₄ particles were prepared by a traditional coprecipitation method. Fe₃O₄ particles were surface treated by either PAA oligomer or lauric acid to form the stable ferrofluid. The first stage for the synthesis of magnetic composite latex was to synthesize PS in the presence of ferrofluid by soapless emulsion polymerization to form the Fe₃O₄/PS composite latex particles. Following the first stage of reaction, the second stage of polymerization was carried out by the method of soapless emulsion polymerization with NIPAAM and MAA as monomers and Fe₃O₄/PS latex as seeds. The magnetic composite particles, Fe₃O₄/PS/P(NIPAAM‐co‐MAA), were thus obtained. The mechanism of the first stage reaction and second stage reaction were investigated. Moreover, the effects of PAA and lauric acid on the reaction kinetics, morphology, and particle size distribution were studied. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3912–3921, 2007     

Polymerization of 1,3‐dienes with functional groups. II. Free‐radical polymerization of N‐(2‐methylene‐3‐butenoyl)piperidine

The free‐radical homopolymerization and copolymerization behavior of N‐(2‐methylene‐3‐butenoyl)piperidine was investigated. When the monomer was heated in bulk at 60 °C for 25 h without an initiator, about 30% of the monomer was consumed by the thermal polymerization and the Diels–Alder reaction. No such side reaction was observed when the polymerization was carried out in a benzene solution with 1 mol % 2,2′‐azobisisobutylonitrile (AIBN) as an initiator. The polymerization rate equation was found to be R_p ∝ [AIBN]^0.507[M]^1.04, and the overall activation energy of polymerization was calculated to be 89.5 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure that included both 1,4‐E and 1,4‐Z configurations. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were carried out in benzene solutions at 60 °C with AIBN as an initiator. In the copolymerization with styrene, the monomer reactivity ratios were r₁ = 6.10 and r₂ = 0.03, and the Q and e values were calculated to be 10.8 and 0.45, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1545–1552, 2003     

Ab initio RAFT emulsion polymerization of butadiene using the amphiphilic poly(acrylic acid‐b‐styrene) trithiocarbonate as both surfactant and mediator

Ab initio reversible addition fragmentation chain transfer (RAFT) emulsion polymerization of butadiene was investigated by using the amphiphilic poly(acrylic acid_n‐b‐styrene₅) trithiocarbonate as both surfactant and mediator. The neutralization on acrylic acid (AA) units played significant influence on the gelation. When half of the AA units were neutralized, the gelation occurred in the early stage of the polymerization so that the highest accessible molecular weight of polybutadiene was as low as 5 kg mol^?1. In the non‐neutralized conditions, the gelation was much retarded so that the highest accessible molecular weight was increased up to 23 kg mol^?1. In the non‐neutralized conditions, potassium persulfate could not initiate the polymerization. When azobisisobutyronitrile was used as initiator, the polymerization mediated by poly(acrylic acid₂₇‐b‐styrene₅) trithiocarbonate could proceed much faster than the solution polymerization did. The latex was stable. Before the gel point, molecular weight agreed well with the theoretical prediction while PDI was relatively high due to the branching reaction. The poly(butadiene‐b‐styrene) core/shell particles could obtained by extending polybutadiene. When the n value in poly (acrylic acid_n‐b‐styrene₅) trithiocarbonate was lower than 20, the coalescence would occur, leading to the formation of some coagulum. On the other hand, when n value was as high as 60, the molecular weight was out of control. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Ultrafast phosphazene‐promoted controlled anionic polymerization of styrenic monomers

The anionic polymerization of styrenic monomers with phosphazene bases as promoters, utilizing “seeding” technique in a nonpolar solvent and at room temperature was studied. In all experiments, the phosphazene base (t‐BuP₄, t‐BuP₂, and t‐BuP₁) was added in an equimolar amount to the organolithium initiator after the formation of oligomers (2 min) by conventional anionic polymerization. When t‐BuP₄ was used, the polymerization of styrene and 4‐methylstyrene was extremely fast (100 % conversion within 5 min) and the final homopolymers exhibited narrow molecular weight distribution and controlled molecular characteristics. Likewise, when weaker bases were employed, the polymerization was also controlled but showing slower reaction rate. To examine the “livingness” of this system, block copolymers were synthesized by sequential monomer addition. Further studies were conducted in order to extend this novel method to the anionic polymerization of dienes. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 456–464     

Synthesis of three‐armed poly(trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L‐proline)‐block‐poly(ε‐caprolactone) copolymers

A series of novel types of three‐armed poly(trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline)‐block‐poly(ε‐caprolactone) (PHpr‐b‐PCL) copolymers were successfully synthesized via melt block copolymerization of trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline (N‐CBz‐Hpr) and ε‐caprolactone (ε‐CL) with a trifunctional initiator trimethylolpropane (TMP) and stannous octoate (SnOct₂) as a catalyst. For the homopolycondensation of N‐CBz‐Hpr with TMP initiator and SnOct₂ catalyst, the number‐average molecular weight (M_n) of prepolymer increases from 530 to 3540 g mol^?1 with the molar ratio of monomer to initiator (3–30), and the molecular weight distribution (M_w/M_n) is between 1.25 to 1.32. These three‐armed prepolymer PHpr were subsequently block copolymerized with ε‐caprolactone (ε‐CL) in the presence of SnOct₂ as a catalyst. The M_n of the copolymer increased from 2240 to 18,840 g mol^?1 with the molar ratio (0–60) of ε‐CL to PHpr. These products were characterized by differential scanning calorimetry (DSC), ¹H NMR, and gel permeation chromatography. According to DSC, the glass‐transition temperature (T_g) of the three‐armed polymers depended on the molar ratio of monomer/initiator that were added. In vitro degradation of these copolymers was evaluated from weight‐loss measurements and the change of M_n and M_w/M_n. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1708–1717, 2005     

High solids TEMPO‐mediated radical semibatch emulsion polymerization of styrene

A bicomponent initiation system consisting of 2,2,6,6‐tetramethylpiperidine‐N‐oxyl (TEMPO) and the water soluble initiator potassium persulfate (KPS) was used to develop a robust and versatile semibatch emulsion polymerization process to obtain polystyrene (PS) latexes with solids contents of 5–40 wt %. A window of operating conditions was found that yielded high conversion (>95%) stable latexes and well controlled polymers, overcoming limitations found in previous attempts at developing similar processes using TEMPO. The critical parameters studied were surfactant concentration, monomer concentration in the nucleation step and the monomer feed rate in the semibatch step. Methyl acrylate (MA) was used in the nucleation step to improve the nitroxide efficiency (N_Eff). Latexes having molecular weight distribution (MWD) with dispersity (?) lower than 1.5, average particle size (D_p) from ≈32 to ≈500 nm, nitroxide efficiencies N_Eff up to ≈1.0 and monomer conversions >90% were obtained in less than 12 h with solids contents up to 40 wt %. These results constitute a significant advance over prior efforts in TEMPO‐mediated polymerization in aqueous dispersions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 49–62     

Synthesis of star‐shaped poly(D,L‐lactic acid‐alt‐glycolic acid)‐b‐poly(L‐lactic acid) with the poly(D,L‐lactic acid‐alt‐glycolic acid) macroinitiator and stannous octoate catalyst

Two types of three‐arm and four‐arm, star‐shaped poly(D,L ‐lactic acid‐alt‐glycolic acid)‐b‐poly(L ‐lactic acid) (D,L ‐PLGA50‐b‐PLLA) were successfully synthesized via the sequential ring‐opening polymerization of D,L ‐3‐methylglycolide (MG) and L ‐lactide (L ‐LA) with a multifunctional initiator, such as trimethylolpropane and pentaerythritol, and stannous octoate (SnOct₂) as a catalyst. Star‐shaped, hydroxy‐terminated poly(D,L ‐lactic acid‐alt‐glycolic acid) (D,L ‐PLGA50) obtained from the polymerization of MG was used as a macroinitiator to initiate the block polymerization of L ‐LA with the SnOct₂ catalyst in bulk at 130 °C. For the polymerization of L ‐LA with the three‐arm, star‐shaped D,L ‐PLGA50 macroinitiator (number‐average molecular weight = 6800) and the SnOct₂ catalyst, the molecular weight of the resulting D,L ‐PLGA50‐b‐PLLA polymer linearly increased from 12,600 to 27,400 with the increasing molar ratio (1:1 to 3:1) of L ‐LA to MG, and the molecular weight distribution was rather narrow (weight‐average molecular weight/number‐average molecular weight = 1.09–1.15). The ¹H NMR spectrum of the D,L ‐PLGA50‐b‐PLLA block copolymer showed that the molecular weight and unit composition of the block copolymer were controlled by the molar ratio of L ‐LA to the macroinitiator. The ¹³C NMR spectrum of the block copolymer clearly showed its diblock structures, that is, D,L ‐PLGA50 as the first block and poly(L ‐lactic acid) as the second block. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 409–415, 2002     

Study on soap‐free P(MMA‐EA‐AA or MAA) latex particles with narrow size distribution

Soap‐free poly(methyl methacrylate‐ethyl acrylate‐acrylic acid or methacrylic acid) [P(MMA‐EA‐AA or MAA)] particles with narrow size distribution were synthesized by seeded emulsion polymerization of methyl methacrylate (MMA), ethyl acrylate (EA) and acrylic acid (AA) or methacrylic acid (MAA), and the influences of the mass ratio of core/shell monomers used in the two stages of polymerization ([C/S]_w) and initiator amount on polymerization, particle size and its distribution were investigated by using different monomer addition modes. Results showed that when the batch swelling method was used, the monomer conversion was more than 96.0% and particle size distribution was narrow, and the particle size increased first and then remained almost unchanged at around 600 nm with the [C/S]_w decreased. When the drop‐wise addition method was used, the monomer conversion decreased slightly with [C/S]_w decreased, and large particles more than 750 nm in diameter can be obtained; with the initiator amount increased, the particle size decreased and the monomer conversion had a trend to increase; the particle size distribution was broader and the number of new particles was more in the AA system than in the MAA system; but the AA system was more stable than the MAA system at both low and high initiator amount. Copyright © 2006 John Wiley & Sons, Ltd.     

Cinnamate‐functionalized poly(ester‐carbonate): Synthesis and its UV irradiation‐induced photo‐crosslinking

A functionalized cyclic carbonate monomer containing a cinnamate moiety, 5‐methyl‐5‐cinnamoyloxymethyl‐1,3‐dioxan‐2‐one (MC), was prepared for the first time with 1,1,1‐tri(hydroxymethyl) ethane as a starting material. Subsequent polymerization of the new cyclic carbonate and its copolymerization with L ‐lactide (LA) were successfully performed with diethyl zinc (ZnEt₂) as initiator/catalyst. NMR was used for microstructure identification of the obtained monomer and copolymers. Differential scanning calorimetry (DSC) was used to characterize the functionalized poly(ester‐carbonate). The results indicated that the copolymers displayed a single glass transition temperature (T_g) and the T_g decreased with increasing carbonate content and followed the Fox equation, indicative of a random microstructure of the copolymer. The photo‐crosslinking of the cinnamate‐carrying copolymer was also demonstrated. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 161–169, 2009     

Poly(2‐hydroxyethyl methacrylate‐co‐N,O‐dimethacryloylhydroxylamine) particles by dispersion polymerization

Poly(2‐hydroxyethyl methacrylate‐co‐N,O‐dimethacryloylhydroxylamine) particles were prepared by dispersion polymerization in toluene/2‐methylpropan‐1‐ol medium using cellulose acetate butyrate and dibenzoyl peroxide (BPO) as a steric stabilizer and initiator, respectively. The particle size was reduced with decreasing solvency of the reaction medium (more nuclei were generated) because the critical chain length of the precipitated oligomers decreased with an increasing toluene content, which is a poorer solvent for the polymer than 2‐methylpropan‐1‐ol. There is an optimum initiator concentration (2 wt % BPO relative to monomers) for producing low‐polydispersity particles under given conditions. Additionally, discrete spherical particles were obtained at a low monomer concentration and/or higher polymerization temperature. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1625–1632, 2002     

New aliphatic poly(ester‐carbonates) based on 5‐methyl‐5‐allyloxycarbonyl‐1,3‐dioxan‐2‐one

The synthesis, characterization, and ring‐opening polymerization of a new cyclic carbonate monomer containing an allyl ester moiety, 5‐methyl‐5‐allyloxycarbonyl‐1,3‐dioxan‐2‐one (MAC), was performed for the first time. MAC was synthesized in five steps in good yield beginning from the starting material, 2,2‐bis(hydroxymethyl)propionic acid. Subsequent polymerization and copolymerizations of the new cyclic carbonate with rac‐lactide (rac‐LA) and ?‐caprolactone (CL) were attempted. Rac‐LA copolymerized well with MAC, but CL copolymerizations produced insoluble products. Oligomeric macroinitiators of MAC and rac‐LA were synthesized from stannous ethoxide, and both macroinitiators were used for the controlled ring‐opening polymerization of rac‐LA. The polymerization kinetics were examined by monitoring the disappearance of the characteristic C? O ring stretch of the monomer at 1240 cm^?1 with real‐time in situ Fourier transform infrared spectroscopy. Postpolymerization oxidation reactions were conducted to epoxidize the unsaturated bonds of the MAC‐functionalized polymers. Epoxide‐containing polymers may allow further organic transformations with various nucleophiles, such as amines, alcohols, and carboxylic acids. NMR was used for microstructure identification of the polymers, and size exclusion chromatography and differential scanning calorimetry were used to characterize the new functionalized poly(ester‐carbonates). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1978–1991, 2003     

Electroactive methacrylate‐based triblock copolymer elastomer for actuator application

A series of ABA triblock copolymers of methyl methacrylate (MMA) and dodecyl methacrylate (DMA) [poly(MMA‐b‐DMA‐b‐MMA)] (PMDM) were synthesized by Ru‐based sequential living radical polymerization. For this, DMA was first polymerized from a difunctional initiator, ethane‐1,2‐diyl bis(2‐chloro‐2‐phenylacetate) with combination of RuCl₂(PPh₃)₃ catalyst and nBu₃N additive in toluene at 80 °C. As the conversion of DMA reached over about 90%, MMA was directly added into the reaction solution to give PMDM with controlled molecular weight (M_w/M_n ≤ 1.2). These triblock copolymers showed well‐organized morphologies such as body centered cubic, hexagonal cylinder, and lamella structures both in bulk and in thin film by self‐assembly phenomenon with different poly(methyl methacrylate) (PMMA) weight fractions. Obtained PMDMs with 20–40 wt % of the PMMA segments showed excellent electroactive actuation behaviors at relatively low voltages, which was much superior compared to conventional styrene‐ethylene‐butylene‐styrene triblock copolymer systems due to its higher polarity derived from the methacrylate backbone and lower modulus. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

A photo‐degradable helix: Synthesis,structure, and photolysis of optically active poly[2,7‐bis(4‐t‐butylphenyl)‐9‐methylfluoren‐9‐yl acrylate]

2,7‐Bis(4‐t‐butylphenyl)‐9‐methylfluoren‐9‐yl acrylate ( BBPMFA ) was synthesized and polymerized using α,α′‐azobisisobutyronitrile or n‐Bu₃B‐air as a radical initiator and using the complex of 9‐fluorenyllithium with (S)‐(+)‐1‐(2‐pyrrolidinylmethyl)pyrrolidine as an optically active anionic initiator. Although the radical polymerization led to rather low‐molecular‐weight products at low yields, the anionic polymerization afforded polymers with higher molecular weights in higher yields. The poly( BBPMFA ) obtained by the anionic polymerization was slightly rich in isotacticity (meso diad 57%) and showed an intense circular dichroism (CD) spectrum and large dextrorotation. The intensity of the CD spectrum and magnitude of optical activity increased with an increase in M_n, suggesting that the polymer possesses a preferred‐handed helical conformation. The CD spectrum disappeared within 1 s on irradiation to the polymer in a CHCl₃ solution using a 500‐W Hg‐Xe lamp. This was ascribed to fast photolysis of the ester linkage leading to a loss of helical conformation of the entire chain. Photolysis products of poly( BBPMFA ) were poly(acrylic acid) and 2,7‐bis(4‐t‐butylphenyl)‐9‐methylenefluorene (2,7‐bis(4‐t‐butylphenyl)dibenzofulvene). The photolysis reaction seemed to proceed through the “unzipping” mechanism. The rate constant of photolysis of poly( BBPMFA ) under irradiation at monochromated 325 nm was around 0.01 s^?1 independent of molecular weight. Photolysis at 325 nm was approximately 2400 times faster than that for chemical ester solvolysis under a neutral condition in the dark. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of well‐defined cyclodextrin‐centered seven‐arm star poly(ε‐caprolactone)s and amphiphilic star poly(ε‐caprolactone‐b‐ethylene glycol)s

Per‐2,3‐acetyl‐β‐cyclodextrin with seven primary hydroxyl groups was synthesized by selective modification and used as multifunctional initiator for the ring‐opening polymerization of ε‐caprolactone (CL). Well‐defined β‐cyclodextrin‐centered seven‐arm star poly(ε‐caprolactone)s (CDSPCLs) with narrow molecular weight distributions (≤1.15) have been successfully prepared in the presence of Sn(Oct)₂ at 120 °C. The molecular weight of CDSPCLs was characterized by end group ¹H NMR analyses and size‐exclusion chromatography (SEC), which could be well controlled by the molar ratio of the monomer to the initiator. Furthermore, amphiphilic seven‐arm star poly(ε‐caprolactone‐b‐ethylene glycol)s (CDSPCL‐b‐PEGs) were synthesized by the coupling reaction of CDSPCLs with carboxyl‐terminated mPEGs. ¹H NMR and SEC analyses confirmed the expected star block structures. Differential scanning calorimetry analyses suggested that the melting temperature (T_m), the crystallization temperature (T_c), and the crystallinity degree (X_c) of CDSPCLs all increased with the increasing of the molecular weight, and were lower than that of the linear poly(ε‐caprolactone). As for CDSPCL‐b‐PEGs, the T_c and T_m of the PCL blocks were significantly influenced by the PEG segments in the copolymers. Moreover, these amphiphilic star block copolymers could self‐assemble into spherical micelles with the particle size ranging from 10 to 40 nm. Their micellization behaviors were characterized by dynamic light scattering and transmission electron microscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6455–6465, 2008