Isomer‐dependent properties of poly(vinyl pyridine)‐based films grown on copper surfaces

The effect of poly(2‐vinyl pyridine) (P2VP) and poly(4‐vinyl pyridine) (P4VP) isomers on the growth of surface films on copper substrates was studied by electrochemical, spectroscopic, thermogravimentric, and microscopic methods. In acid environment (3% v/v acetic acid) and in the presence of KSCN, electrochemically generated copper cations reacted rapidly with SCN^? and P2VP or P4VP, yielding coordination compounds, which deposited onto copper surfaces as films. The characteristics of such polymer–metal complexes (films) were markedly isomer‐dependent. Cu(I)/P2VP/SCN^? complexes with monovalent cations and sulfur‐coordinated thiocyanate were obtained in the presence of P2VP, whereas the formation of Cu(II)/P4VP/SCN^? complexes with divalent cations and nitrogen‐coordinated thiocyanate was observed in the presence of P4VP. Interestingly, similar physical–chemical properties (electronic structure, stoichiometry, and thermal behavior) were observed for materials synthesized by electrochemical and chemical methods. These results suggest, therefore, that control over the surface properties of copper substrates can be achieved using electrosynthesized films based on different PVP isomers. Besides acting as effective protective barriers against aggressive media and thus reducing the metal dissolution (corrosion) kinetics, these materials are potentially attractive for other applications in which surface properties are paramount, such as in catalysis. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 215–225, 2009     

Complexation of copper(II) ions with imidazole–carboxylic polymeric systems

The interaction of two polyampholyte systems, poly(1‐vinylimidazole‐co‐acrylic acid) and interpolymer complex poly(acrylic acid)/poly(1‐vinylimidazole) with copper(II) ions in water, was examined with potentiometry (pH‐metry and Cu‐selective electrode) and electron spin‐resonance spectroscopy. Coordination of Cu²⁺ with copolymer proceeded by carboxylic groups, whereas the interpolymer system azole units were also involved in the inner sphere of the complex. Synergism between coordination with metal ions and intramolecular hydrogen or ionic bonds was shown. The interpolymer complex was an effective system for binding, extracting, and concentrating copper ions from water. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2256–2263, 2003     

Electrochemistry of the system Cu(II)Cu(I)Cu(0) in acidified thiocyanate solutions

The system Cu(II)Cu(I)Cu(0) in acidified thiocyanate medium was investigated at carbon, mercury, and copper amalgam electrodes using cyclic voltammetry, normal, differential and reverse pulse voltammetry, double potential step chronocoulometry, and exhaustive coulometry. Reduction of Cu(II) to Cu(I) on carbon electrodes proceeds quasireversibly. At moderate concentrations of Cu(II) and SCN^? the reduction of Cu(II) leads to three-dimensional precipitation of CuSCN which can be deposited at the electrode surface. At high concentration of SCN^? complexation dominates over precipitation and only soluble species are formed. At mercury and copper amalgam electrodes the situation is more complicated. The three- dimensional precipitation is preceded by strong thiocyanate-induced adsorption of Cu(I) which results in formation of a mono layer at potential well-separated from those where diffusing product is formed.     

Electrochemical studies of copper fatty amides complex in organic medium

The electrochemical behavior of complexes of fatty amides, synthesized from vegetable oil, with Cu(II) has been investigated. In this study, a platinum electrode was used in presence of DMSO as a medium. Reduction of Cu(II)/fatty amides complex was found with quasi-reversible reaction. The peak potential of voltammetric behavior of fatty amides is about ?0.77 V at a scan rate v = 0.1 V s^?1 versus Ag|Ag⁺ electrode. This study shows that Cu(II)-fatty amides complex is poorly adsorbed on the electrode surface. Additionally, the copper complex form of fatty amides has a more stable structure than pure fatty amides to form the electrochemical reduction of the complex.     

Monomer/polymer Schiff base copper(II) complexes for catalytic oxidative polymerization of 2,2′‐dihydroxybiphenyl

Catalytic oxidative polymerization of 2,2′‐dihydroxybiphenyl (DHBP) was performed by using both the Schiff base monomer‐Cu(II) complex and Schiff base polymer‐Cu(II) complex compounds as catalysts and hydrogen peroxide as oxidant, respectively. The dependence of monomer conversion and molecular weight distribution on various reaction parameters, including time, temperature, solvent as well as the amount of catalyst and oxidant were investigated. The structure of the poly‐2,2′‐dihydroxybiphenyl (PDHBP) was confirmed by UV‐vis, IR, ¹H and ¹³C NMR spectroscopy techniques. The electrochemical and thermal properties of PDHBP were also studied. DSC data revealed that PDHBP was amorphous. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2977–2984, 2009     

Cathodic and anodic stripping determination of traces of adenine and adenosine based on accumulation of copper(I) compounds at mercury or amalgam electrodes

In the presence of adenine and adenosine, the copper(II)/copper(Hg) couple splits to the copper(II)/copper(I) and copper(I)/copper(Hg) couples. Sparingly soluble complexes of copper(I) with adenine and adenosine can be accumulated on the electrode surface either by reduction of Cu(II) ions or by oxidation of the copper amalgam electrode. The copper(I)/adenine deposit can be stripped either cathodically or anodically with detection limits of 5×10^?9 and 2×10^?8 mol dm^?3, respectively. The copper(I)/ adenosine complex yields only the cathodic stripping peak with a detection limit of 9×10^?6 mol dm^?3. The stripping peaks obtained for the copper(I)/adenine and copper(I)/ adenosine complexes are better defined and appear over a wider range of pH than the peaks related to the corresponding mercury compounds. Adenosine cannot be determined in the presence of adenine bur adenine can be determined in the presence of moderate amounts of adenosine.     

Voltammetry of copper species in estuarine waters induced adsorption of copper on the hanging mercury drop electrode in complexing ligand/surfactant/chloride media

The adsorption of copper species on a positively charged hanging mercury drop electrode in complexing ligand/surfactant/chloride solution is discussed. Techniques used were differential pulse voltammetry of the copper in the adsorbed film, and potential-step reduction of adsorbed copper followed by different pulse anodic stripping voltammetry of Cu(Hg). The CuCl^?₂ species is shown to be the most important copper moiety adsorbed on the electrode and the adsorption is enhanced by organic films. This can be a critical pathway in the reduction of copper(II) in estuarine waters. The induced adsorption of copper in organic layers has biogeochemical implications associated with the nature of organic films and their influence on the Cu(II)/Cu(I) redox couple. There are also analytical applications, e.g., the compositional assay of organic monolayers by utilising Cu(II) and Cu(I) adsorption as electoractive probes and the determination of solution copper-organic binding.     

Phase Evolution of Cu?S System in Ethylene Glycol Solution: the Effect of Anion and PVP on the Transformation of Thiourea

The transformation mechanisms of thiourea in ethylene glycol solution was systematically investigated in this report, which shows the transformation process is influenced by the anion (NO^3?, Cl^?, Br^?) and polyvinylpyrrolidone (PVP). Thiourea (tu) isomerizes into ammonium thiocyanate when NO^3? is present, regardless of the existence of PVP. For Cl^?, thiourea coordinates with copper anion to form [Cu(tu)]Cl·1/2H₂O complex whether PVP is present. When it comes to Br^?, thiourea hydrolyzes in the cooperation of PVP or coordinates with copper anion to form [Cu(tu)Br]·1/2H₂O complex without PVP. The different transformation routes will lead to different phase evolution of the Cu? S system. This work may provide a new understanding of the transformation of thiourea in ethylene glycol solution. The optical properties of the as‐prepared copper sulfides exhibit signi?cant stoichiometry‐dependent features which may have potential applications in semiconductor photovoltaic devices.     

The mechanism of ascorbic acid oxidation by Cu(II)-poly-4-vinylpyridine complexes

The mechanism of ascorbic acid (DH₂) oxidation with molecular oxygen catalysed by the polynuclear complex of Cu²⁺ with poly-4-vinylpyridine (PVP), partially quaternized by dimethylsulphate, has been studied. The half-conversion time of the reaction of DH₂ with Cu(II) PVP under anaerobic conditions is independent of [Cu²⁺]. At pH 3.5, t_0.5 (sec) = 0.8 + 5 × 10^?4 [DH₂]. The formation of an intermediate cupric-ascorbate complex is suggested (K_c ≈ 10⁴ M^?1). Free radicals of ascorbic acid are detected by the ESR-method combined with a flow technique. The small steady-state concentration of radicals indicates that their decay occurs inside the macromolecular complex. The rate constant of the PVP Cu(II) DH^? ternary complex dissociation is ≈0.4 sec^?1 (pH 3.5). The reaction of Cu(I) PVP with O₂ is not accompanied by formation of O₂^? outside the macromolecule bulk. The rate constant of this reaction is 1.3 ± 0.15) × 10² M^?1 sec^?1 (pH 3.5). The cyclic mechanism of the catalytic reaction is suggested to include interchange of the redox state of copper-ions. About $\text{2}\text{3}$ of the total copper ion exists in the form Cu(I) PVP during the reaction at pH 3.5. The rate of DH₂ oxidation under these conditions is limited by the rate of Cu(I) PVP reaction with O₂. At pH 4.5 the overall reaction rate is limited by the rate of interaction of Cu(II) PVP with DH^?.     

Charge transport and contact resistance in coplanar devices based on colloidal polyaniline dispersion

The charge transport properties of thin films prepared from colloidal dispersion of polyaniline stabilized by poly(N‐vinylpyrrolidone) (PANI/PVP) have been investigated. The electrical characterization of coplanar device comprising of gold electrodes and PANI/PVP film deposited by spin coating served to gain insights into the contact and bulk resistance. The films prepared from PANI/PVP colloidal dispersion show high stability over a large temperature range. Temperature dependent measurements in the range from 90 to 350 K reveal that the charge transport can be described by a three‐dimensional variable‐range hopping mechanism as the dominant mode in the films. The stability of the films cast from dispersion within a large temperature range opens the possibility of the application as a polymer semiconductor layer in sensors and charge‐transport interlayer in organic solar cells. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1710–1716     

Voltammetric measurement of copper(II)/organic interactions in estuarine waters

The voltammetry of copper in organic ligand/chloride media is dominated by the formation of CuCl^?₂ species and by induced adsorption of Cu(I) in organic coatings on the electrodes. These phenomena are utilised in a novel method for evaluating Cu(II)/organic ligand interactions, based on the principle of ligand exchange. The Cu(II)/organic species competes with glycine which forms copper glycinate. These two complexes can be distinguished voltammetrically: copper glycinate gives a higher surface excess of copper at a gelatin-coated hanging mercury drop electrode, partly because of the increased production of CuCl^?₂ from copper glycinate at the electrode surface. The method proved satisfactory for pure ligand/surfactant/chloride media and for estuarine waters. It is shown that there are two type of Cu(II)-binding ligand in estuarine waters: humic material (> 10^?6 mol l^?1, assuming 1:1 site binding) with polyelectrolyte-type binding, and discrete ligands (? 10^?6 M) with stability constants around 10⁹. The extent of Cu(II) binding by the humic material decreases down the estuary because of dilution and increased salinity.     

Highly Selective Thiocyanate Electrode Based on Bis‐bebzion Schiff Base Binuclear Copper(II) Complex as Neutral Carrier

Abstract

A highly selective polyvinyl chloride (PVC) membrane electrode, based on N,N′‐(aminoethyl)ethylenediamide bis(2‐benzoideneimine) binuclear copper(II) complex [Cu(II)‐AEBB] as neutral carrier, was prepared for thiocyanate (SCN^?) determination, which displays an anti‐Hofmeister selectivity sequence for a series of anions in the following order: SCN^?>ClO₄ ^?>Sal^? > I^?>NO₃ ^?>Br^?> Cl^?>NO₂ ^?>SO₃ ^2?>F^?>H₂PO₄ ^?>SO₄ ^2?. The electrode exhibited near‐Nernst response for SCN^? with a slope of –59.0 mV/decade over a wide concentration range (8.5×10^?7～6.8×10^?1 mol/L) with a detection limit of –5.0×10^?7 mol/L in pH 5.0 phosphate buffer solution at 25°C. Alternating current (AC) impedance and equivalent circuits were used to investigate the thiocyanate response mechanism of the membrane doped with [Cu(II)‐AEBB].     

Investigation on miscibility,thermal, crystallographic diffraction and dynamic-mechanical properties of poly(vinyl alcohol)/poly(vinylpyrrolidone)/zirconium phosphate nanocomposites

Journal of Thermal Analysis and Calorimetry - This work approaches the effects of a synthetic nanofiller on poly(vinyl alcohol)/poly(vinylpyrrolidone)/zirconium phosphate (PVA/PVP/ZrP)...     

Interaction between poly(N-vinylpyrrolidone) and poly(acrylic acid)s: Influence of hydrogen and cupric ions on the adduct formation

Interpolymer adduct formation between poly(N-vinylpyrrolidone) (PVP) and poly(methacrylic acid) (PMAA) is mainly due to hydrogen bonding. It is found that the interpolymer adduct formation is enhanced in the presence of Cu(II). A simple turbidity measurement making use of a spectrophotofluorometer is described for the study of the interpolymer adduct formation. Enhanced adduct formation in the presence of Cu(II) is described by the empirical relation d[PAd]/D[PVP] = k × 10^4α[Cu(II)]^α, where PAd represents the interpolymer adduct and α and k are constants. Similar results have been obtained in the case of interpolymer adduct formation between poly(acrylic acid) (PAA) and PVP. In the above expression α signifies the influence of chelation on Cu(II)–PAA/PMAA–PVP-type complex formation and k is the extent of PVP–PAA/PMAA interaction. The enhancement of adduct formation in the presence of Cu(II) is more in PAA than in PMAA. Turbidity and viscosity measurements further indicate that the influence of Cu(II) on interpolymer adduct formation between PVP and PMAA or PAA is more in the case of PAA than PMAA, as PAA is a better chelating ligand. But the extent of adduct formation is more in the case of PMAA in the absence of Cu(II) ions due to hydrophobic interactions exerted by methyl groups.     

Synthesis and characterization of pH‐sensitive PAMPS/PVP nanogels in aqueous media

A novel method for preparing poly (2‐acrylamido‐2‐methylpropane sulfonic acid) (PAMPS) and poly (vinylpyrrolidone) (PVP) complex nanogels in PVP aqueous solution is discussed in this paper. The PAMPS/PVP complex nanogels were prepared via polymerization of 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS) monomer in the presence of PVP nanoparticles which formed in water/acetone cosolvent in presence of N, N′‐methylenebisacrylamide (MBA) as a crosslinker, N, N, N′, N′‐tetramethylethylenediamine (TEMED) and potassium peroxydisulfate (KPS) as redox initiator system. The results of FTIR and ¹H NMR spectra indicated that the compositions of PAMPS/PVP are consistent with the designed structure. TEM micrographs proved that PAMPS/PVP nanogels possess the spherical morphology before and after swelling. These PAMPS/PVP nanogels exhibited pH‐induced phase transition due to protonation of PAMPS chains. The properties of PAMPS/PVP nanogels indicate that PAMPS/PVP nanogels can be developed into a pH‐controlled drug delivery system. Copyright © 2009 John Wiley & Sons, Ltd.     

Azine bridge formation during the electrografting of acrylonitrile

We report the electrografting of polyacrylonitrile (PAN) films onto evaporated gold, silver, and copper substrates, and onto platinum foil. The FTIR spectra of the films are virtually identical to library spectra of PAN and show no evidence of the cyclization observed by some authors. Raman spectra of the same films, however, display a broad absorption band centered at ～1520 cm^?1 and a second band at 1096 cm^?1, which are neither present in spin‐coated films of commercially obtained PAN nor are they present in the FTIR spectra. These previously unreported Raman bands are dependent on a number of factors in the electrografting process; the working electrode metal, the monomer concentration, the solvent used, and the electrochemical protocol used for cleaning the working electrode. The relative intensity of the bands was found to be strongest in films grown on platinum and weakest in those grown on gold, and stronger in thin films (<50 nm) than in thick films (>100 nm). We suggest that these new spectral features are associated with azine‐linked polymer chains in a ladder‐like structure close to the electrode surface as a result of the predominantly isotactic brush‐like conformation of the polymer during the early stages of electrografting. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1685–1695, 2009     

Electrochemical kinetics of gold electrodes in SCN−/dimethylsulfoxide solutions

The electrochemical behaviour of the Au/SCN^? (DMSO) interface is studied at 25°C≤T≤65°C, by means of the triangular potential sweep technique and the RDE. Within a relatively limited potential range the main electrode process is:3 SCN^?=(SCN)₃^?+2e The kinetics of this reaction involves a mixed control. At higher potentials the electrodissolution of the base metal takes place. Side reactions occurring there make the overall process rather complex. The electrochemical behaviours of the Au/SCN^? (DMSO) and Au/SCN^? (ACN) are compared.     

Determination of traces of purine by cathodic stripping voltammetry at the hanging copper amalgam drop electrode

In the presence of purine, the copper(II)/copper(Hg) couple splits into copper(II)/copper(I) and copper(I)/copper(Hg) couples, which form two well-separated systems of peaks under voltammetric conditions. The copper(I)/purine complex adsorbs on the electrode surfacer and can be deposited on the electrode surface by electroreduction of copper(II) ions at the HMDE or by electro-oxidation of the hanging copper amalgam drop electrode (HCADE). The deposit can be stripped either cathodically or anodically over the pH range 2–9. The cathodic stripping variant at the HCADE, in solution with pH 2, offers the best results, with linear response for the range 5 × 10^?9–1.5 × 10^?7 mol dm^?3 purine after an accumulation time of 3 min. The detection limit found with the HMDE in the presence of copper(II) ions is higher.     

Asymmetric Oxygen Bridged Copper(II) Carboxylate: Synthesis,Complete Characterization,and Crystal Structure

Binuclear centrosymmetric copper(II) complex of the formula bipyCu(L)₄Cubipy, where bipy = 2,2′- bipyridine and L = 4-methoxy-2-phenyl acetate, is synthesized and characterized by FT-IR, UV-Visible, ESR and mass spectroscopy, electrochemical, thermogravimetric, and single crystal XRD techniques. The complex contains two differently oriented molecules per unit cell stabilized via intermolecular interactions. Geometry around each Cu(II) was found to be square pyramidal affected by asymmetrically bridging oxygen atoms occupying the apical position of one square pyramid and the axial position of another in the same binuclear molecule. The square base is formed by two oxygen atoms from two carboxylate ligands and two nitrogen atoms from the bipyridine moiety. TGA shows that the complex is stable up to 170 °C followed by stepwise loss of coordinated ligands, which was supported by GC-MS data as well. A broad absorption spectrum indicated ²B_1g as the ground state and single electron occupancy of the dx²–y² orbital, which was confirmed by the ESR spectrum. The electrochemical study gives two oxidation curves corresponding to Cu(II)/Cu(III) and Cu(I)/Cu(II) and a reduction signal corresponding to the Cu(II)/Cu(I) process. The robust complex represents an interesting contribution to the understanding of coordination chemistry.     

Synthesis,crystal structure,and DNA-binding studies of a one-dimensional copper(II) polymer bridged both by oxamidate and thiocyanato ligands

A new one-dimensional copper(II) polymer, [Cu₄(dmapox)₂(SCN)₄(CH₃OH)₂] _n , where dmapox is the dianion of N,N′-bis[3-(dimethylamino)propyl]oxamide, was synthesized and characterized by elemental analysis, conductivity measurement, IR, and electronic spectral studies. The crystal structure of the copper(II) complex has been determined by X-ray single-crystal diffraction. The complex crystallizes in triclinic, space group P ? 1 and exhibits infinite one-dimensional copper(II) polymeric chain bridged both by bis-tridentate μ-trans-dmapox and μ-1,3-thiocyanato ligand. The environment around the copper(II) atom can be described as distorted square-pyramid. The Cu···Cu separations through the oxamidate and thiocyanato bridges are 5.246(2) Å (Cu1–Cu1ⁱ), 5.2649(14) Å (Cu2–Cu2ⁱⁱ), and 5.8169(15) Å (Cu1–Cu2), respectively. The interaction of the copper(II) complex with herring sperm DNA (HS-DNA) has been investigated by using absorption and emission spectral and electrochemical techniques and viscometry. The results reveal that the copper(II) complex may interact with DNA in the mode of groove binding with the intrinsic binding constant of 2.56 × 10⁵ M^?1.