A novel thermotropic liquid crystalline copolyester containing phosphorus and aromatic ether moity toward high flame retardancy and low mesophase temperature

A series of thermotropic liquid crystalline polyesters containing phosphorus and aromatic ether groups (TLCP‐AEs) were synthesized from p‐acetoxybenzoic acid (p‐ABA), terephthalic acid (TPA), 4,4′‐oxybis(benzoic acid) (OBBA), and acetylated 2‐(6‐oxid‐6H‐dibenz(c,e) (1,2) oxaphosphorin 6‐yl) 1,4‐benzenediol (DOPO‐AHQ). The chemical structure and the properties of TLCP‐AEs were characterized by Fourier‐transform spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR), differential scanning calorimetry (DSC), X‐ray diffraction (XRD), thermogravimetry analysis (TGA), scanning electronic microscopy (SEM), polarizing optical microscopy (POM), limiting oxygen index, and UL‐94 tests, respectively. The results showed that TLCP‐AEs had low and broad mesophase temperatures (230–400 °C). TLCP‐AEs also showed excellent thermal stability; their 5%‐weight‐loss temperatures were above 440 °C and the char yields at 700 °C were higher than 45 wt %. All TLCP‐AE polyesters exhibited high flame retardancy with a LOI value of higher than 70 and UL‐94 V‐0 rating. The SEM observation revealed that TLCP‐AEs had good fibrillation ability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1182–1189, 2010     

A phosphorus‐containing thermotropic liquid crystalline copolyester with low mesophase temperature and high flame retardance

A novel phosphorus‐containing thermotropic liquid crystalline copolyester with flexible spacers (P‐TLCP‐FS) was synthesized by melt transesterification from p‐acetoxybenzoic acid (p‐ABA), terephthalic acid (TPA), ethylene glycol, and acetylated 2‐(6‐oxid‐6H‐dibenz(c,e) (1,2) oxaphosphorin 6‐yl) 1,4‐benzenediol (AODOPB). The chemical structure and properties of the obtained P‐TLCP‐FS were characterized by Fourier‐transform infrared spectroscopy (FT‐IR), proton nuclear magnetic resonance spectroscopy (¹H‐NMR), inherent viscosity measurements, differential scanning calorimetry (DSC), thermogravimetry (TGA), polarizing light microscopy (PLM), and X‐ray diffraction (XRD) analysis. P‐TLCP‐FS had inherent viscosities of 0.92–1.12 dL/g and exhibited low and wide mesophase temperatures, ranging from 185 to 330 °C, which can match with the processing temperatures of most conventional polymers and high flame retardancy with a limiting oxygen index value of 70% and UL‐94 V‐0 rating. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5752–5759, 2008     

A novel phosphorus‐containing thermotropic liquid crystalline poly(ester‐imide) with high flame retardancy

A novel phosphorus–nitrogen thermotropic liquid crystalline poly(ester‐imide) (PN‐TLCP) derived from p‐acetoxybenzoic acid (ABA), terephthalic acid (TPA), acetylated 2‐(6‐oxide‐6H‐dibenz<c,e><1,2>oxa phosphorin‐ 6‐yl)‐1,4‐dihydroxy phenylene (DOPO‐AHQ) and N,N'‐hexane‐1,6‐diylbis(trimellitimide) was prepared by melt transesterification. The chemical structure, the mesophase behavior, and the thermal properties of the copolymer were investigated with Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR), elemental analysis, wide‐angle X‐ray diffraction (WAXD), hot‐stage polarized light microscopy (PLM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). PN‐TLCP exhibited a nematic mesophase with a strong birefringence at a low and broad mesomorphic temperature ranging from 220 to 350°C, an initial flow temperature as low as about 190°C and a glass transition temperature of about 160°C. PN‐TLCP has also good thermal stability, high char residues and excellent flame retardancy (limiting oxygen index, LOI = 71 and UL‐94 V‐0 rating). Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation,thermal properties,and flame retardance of epoxy–silica hybrid resins

A novel epoxy system was developed through the in situ curing of bisphenol A type epoxy and 4,4′‐diaminodiphenylmethane with the sol–gel reaction of a phosphorus‐containing trimethoxysilane (DOPO–GPTMS), which was prepared from the reaction of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) with 3‐glycidoxypropyltrimethoxysilane (GPTMS). The preparation of DOPO–GPTMS was confirmed with Fourier transform infrared, ¹H and ³¹P NMR, and elemental analysis. The resulting organic–inorganic hybrid epoxy resins exhibited a high glass‐transition temperature (167 °C), good thermal stability over 320 °C, and a high limited oxygen index of 28.5. The synergism of phosphorus and silicon on flame retardance was observed. Moreover, the kinetics of the thermal oxidative degradation of the hybrid epoxy resins were studied. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2354–2367, 2003     

In-depth analysis on thermal phase transition mechanism of main-chain phosphorus-containing thermotropic liquid crystal copolyester

In order to surmount drawbacks of the infrared spectroscopy (IR) itself during investigating the mesophase-transition behaviours and mechanism of the thermotropic liquid crystalline polymers (TLCPs), the elemental phosphorus as an internal marker was introduced into the main-chain TLCPs. The detail mechanism of the glass transition and mesophase phase transition of the phosphorus-containing aromatic liquid crystalline copolyester (poly(-hydroxybenzate-co-DOPO-benzenediol dihydrodiphenyl ether terephthalate) [PHDDT]) was revealed through tracing the internal marker with the perturbation correlation moving window 2-dimensional correlation and 2-dimensional correlation analysis (2DCOS) correlation IR spectra. The results showed that the phosphorus-containing unit did not participate in the glass transition of the PHDDT. The results of the 2DCOS showed that the PHDDT mesophase phase transition took place through adjustment of the phosphorus-containing units. Simultaneously, the adjustment of the phosphorus-containing unit also can induce the motion of the other groups, and the sequential orders of the spectral changes were Ar–O–Ar → ester C–O → C=O. However, the sequential orders of the spectral changes were converse during the PHDDT glass transition.     

Flame‐retardant epoxy resins from o‐cresol novolac epoxy cured with a phosphorus‐containing aralkyl novolac

A novel phosphorus‐containing aralkyl novolac (Ar‐DOPO‐N) was prepared from the reaction of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) first with terephthaldicarboxaldehyde and subsequently with phenol. The chemical structures of the synthesized compounds were characterized with Fourier transform infrared, ¹H and ³¹P NMR, and elemental analysis. Ar‐DOPO‐N blended with phenol formaldehyde novolac was used as a curing agent for o‐cresol formaldehyde novolac epoxy, resulting in cured epoxy resins with various phosphorus contents. The epoxy resins exhibited high glass‐transition temperatures (159–177 °C), good thermal stability (>320 °C), and retardation on thermal degradation rates. High char yields and high limited oxygen indices (26–32.5) were observed, indicating the resins' good flame retardance. Using a melamine‐modified phenol formaldehyde novolac to replace phenol formaldehyde novolac in the curing composition further enhanced the cured epoxy resins' glass‐transition temperatures (160–186 °C) and limited oxygen index values (28–33.5). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2329–2339, 2002     

Vinyl‐terminated side‐chain liquid‐crystalline polyethers containing mesogenic benzylideneaniline moieties

The synthesis of two vinyl‐terminated side‐chain liquid‐crystalline polyethers containing benzylideneaniline moieties as mesogenic cores was approached in two different ways: by chemically modifying poly(epichlorohydrin) with suitable mesogenic acids or by polymerizing analogous glycidyl ester or glycidyl ether derivatives. In all the conditions tested, the first approach led to materials in which the imine group was hydrolyzed. The second approach led to the desired polymers PG2a and PG2b , but only from the glycidyl ether derivatives and when the initiator was the system that combined polyiminophosphazene base t‐Bu‐P₄ and 3,5‐di‐t‐butylphenol. These polymers were chemically characterized by IR and ¹H and ¹³C NMR spectroscopies. The estimated degrees of polymerization ranged from 30 to 36. The liquid crystalline behavior of the synthesized polymers was studied by differential scanning calorimetry, polarized optical microscopy (POM) and X‐ray diffraction. Both polymers behave like liquid crystals and exhibited a single mesophase, which was recognized as a smectic C mesophase, probably with a bilayer arrangement, i.e., a smectic C₂ mesophase. The crosslinking of both polymers was performed with dicumyl peroxide as initiator, which led to liquid crystalline thermosets. POM and X‐ray diffraction confirmed that the mesophase organization mantained on the crosslinked materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1877–1889, 2006     

Preparation of the thermotropic copoly(amide ester) of p‐aminobenzoic acid and m‐hydroxybenzoic acid with diphenyl chlorophosphate/pyridine

A thermotropic copoly(amide ester) exhibiting a nematic mesophase within the range of 240–360 °C was prepared by the solution copolycondensation of p‐aminobenzoic acid (40–70 mol %) and m‐hydroxybenzoic acid with diphenyl chlorophosphate in pyridine in the presence of LiCl. For control of the sequence distribution of p‐aminobenzoic acid, the amount of LiCl and the dropwise addition of the phosphate were examined. The transition temperatures (from a solid phase to a nematic mesophase) of the resultant copolymers were affected by the period of addition and the amounts of the aminobenzoic acid and LiCl and were investigated in terms of the distributions of the monomers determined by ¹H NMR. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1775–1780, 2002     

Liquid crystal polymers. VIII. Liquid crystalline polyesters of trans-4,4′-stilbenedicarboxylic acid and 1,3-propanediol

In our recent overview of liquid crystalline polyesters of trans-4,4′-stilbenedicarboxylic acid (SDA) and aliphatic glycols,¹ we reported that “… the 1,3-propanediol polyester did not exhibit thermotropic liquid crystallinity (no stir opalescence or DSC endotherm above T_m), perhaps because of the relatively high T_m (303°C) for a polymer of a glycol having an odd number of carbon atoms.” We now have studied the melting characteristics of another sample of this polymer more carefully and have concluded that it does exhibit a liquid crystalline mesophase over a very narrow temperature range. In this Note we give the thermal properties of this polymer and the thermal and mechanical properties of an SDA/1,3-propanediol copolyester which we also injection molded. These properties are compared and contrasted with those of the similar polyester and copolyester prepared with 1,4-butanediol instead of 1,3-propanediol.     

Synthesis and characterization of side‐chain liquid‐crystalline polymers and study of their role in the crystallization of high‐density polyethylene

Side‐chain liquid‐crystalline polymers (SCLCPs) as nucleating agents for high‐density polyethylene (HDPE) were investigated. For this purpose, the molecular architectures of four different vinyl monomers with liquid‐crystalline properties were designed and prepared with 1‐butanol, 1‐pentanol, 4‐hydroxybenzoic acid, hydroquinone, and acryloyl chloride as the starting materials through alkylation and acylation reactions. The corresponding polymers were synthesized by homopolymerization in 1,4‐dioxane with benzoyl peroxide as the initiator at 60 °C. Both the monomers and the synthesized polymers were characterized with elemental analysis, Fourier transform infrared, and ¹H NMR measurements. Differential scanning calorimetry, thermogravimetric analysis, and hot stage polarized optical microscopy were employed to study the phase‐transition temperature, mesophase texture, and thermal stability of the liquid‐crystalline polymers. The results showed that all the polymers had thermotropic liquid‐crystalline features. Being used as nucleating agents, SCLCPs effectively increased both the crystallization temperature and rate and, at the same time, raised the crystallinity for HDPE. In comparison with common small‐molecule nucleating agents, such as 1,3:2,4‐dibenzylidenesorbitol, SCLCPs are more efficient and are indeed excellent nucleating agents for HDPE. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3067–3078, 2005     

Hierarchically ordered ABA triblock copolymer with large difference in glass transition temperatures of the two blocks

Rod‐coil‐rod triblock copolymers, poly[4′‐(methoxy)‐2‐vinylbiphenyl‐4‐methyl ether] ‐blockpolydimethylsiloxane‐block‐poly[4′‐(methoxy)‐2‐vinylbiphenyl‐4‐methyl ether] (PMVBP‐b‐PDMS‐b‐PMVBP), were synthesized by nitroxide‐mediated radical polymerization, and their hierarchically ordered structures were studied. A difunctional TEMPO macroinitiator was first synthesized by the hydrosilylation reaction between hydride‐endcapped PDMS and allylic alkoxyamine. The polymerization of the monomer MVBP was triggered by the macroinitiator, resulting in a series of triblock copolymers. The molecular weights and polydispersity indexes were determined by gel permeation chromatography. Differential scanning calorimetry results demonstrate that the triblock copolymers exhibit two glass transition temperatures (?120 °C and 160 °C) that are markedly different. As revealed by small‐angle X‐ray scattering and transmission electron microscopy experiments, the triblock copolymers self‐assemble into hierarchical structures with the liquid crystalline phase of PMVBP in the lamellar structures. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1737–1744     

In situ synthesis of a novel transparent poly (methyl methacrylate) resin with markedly enhanced flame retardancy

A novel phosphorus‐containing monomer, (6‐oxido‐6H‐dibenzo[c,e][1,2]oxaphosphinin‐6‐yl)methyl acrylate (DOPO‐AA), is first synthesized and characterized by Fourier transform infrared spectra (FTIR), ¹H nuclear magnetic resonance (NMR) and ³¹P NMR. The monomer is then introduced into poly (methyl methacrylate) (PMMA) matrix via in situ copolymerization to produce a new PMMA based copolymer (PMMA/DOPO‐AA). From UV–vis spectra, microscale combustion calorimeter (MCC) and thermogravimetric analyses (TGA) results, the as‐fabricated PMMA/DOPO‐AA copolymers not only keep relatively high transparency, but also exhibit remarkable improvements in the flame retardancy and thermal stability, such as increased T_0.5 by 60.2°C and limited oxygen index (LOI) by 4.1, and decreased peak heat released rate (PHRR) by 34.7%. Thermal degradation behaviors investigated by real time Fourier transform infrared spectra (RTIR), char structure analysis studied by scanning electron microscope (SEM) and pyrolysis gaseous products studied by TGA coupled with FTIR (TGA‐FTIR) demonstrate that the catalytic charring function of DOPO‐AA in condensed phase and DOPO flame retardant systems in the gas phase are two key factors for the property enhancements. This work not only provides a promising flame‐retardant monomer for polymers, but also will stimulate more efforts on the development of DOPO‐containing flame‐retardant monomers. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis,characterization, and in vitro degradation of thermotropic polyesters and copolyesters based on terephthalic acid, 3‐(4‐hydroxyphenyl)propionic acid,and glycols

A new series of thermotropic liquid‐crystalline (LC) polyesters were prepared from a diacyl chloride derivative of 4,4′‐(terephthaloyldioxy)‐di‐4‐phenylpropionic acid (PTP) and glycols with a different number of methylene groups (n) [HO(CH₂)_n OH, n = 6–10, 12] by high‐temperature solution polycondensation in diphenyl oxide. PTP6/10 and PTP6/hydroquinone (H) LC copolyesters were also prepared according to a similar procedure. The chemical structure, LC, phase‐transition behaviors, thermal stability, and solubility were characterized by elemental analysis, Fourier transform infrared spectroscopy, ¹H and ¹³C NMR spectra, differential scanning calorimetry (DSC), thermogravimetric analysis, and a polarizing light microscope. The melting and isotropization temperatures decreased in a zigzag manner as the number of n increased. All of the polyesters formed a nematic phase with the exception of PTP8. The temperature ranges of the mesophase (ΔT) were much wider for the polyesters with an odd number of n's than those with an even number. ΔT increased markedly for the PTP6/10 and PTP6/H copolyesters. The in vitro degradations of the polymers were ascertained by enzymatic hydrolysis and alkaline hydrolysis. The model compound, PTP dihexylester, was synthesized and found to be degraded into terephthalic acid, 3‐(4‐hydroxyphenyl)propionic acid, and 1‐hexanol by Rhizopus delemar lipase, but PTPn homopolyesters and PTP6/10 and PTP6/H copolyesters were resistant to Rhizopus delemar hydrolysis. They were degradable in a sodium hydroxide buffer solution of pH 12 at 60 °C, depending on the number of n's and the copolymer composition. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3043–3051, 2001     

Bio‐based nanocomposites composed of photo‐cured epoxidized soybean oil and supramolecular hydroxystearic acid nanofibers

A mixture of epoxidized soybean oil (ESO), (R)‐12‐hydroxystrearic acid (HSA) and a photoinitiator for cationic polymerization in the ESO/HSA weight ratio 10/1 was heated to 100 °C and gradually cooled to room temperature to give bio‐based gelatinous material. The photo‐curing of the gel afforded a nanocomposite composed of crosslinked ESO and supramolecular HSA nanofibers. The transmission electron microscopy observation of the photo‐cured ESO/HSA revealed that dendritic clusters of HSA nanofibers are formed in the crosslinked ESO matrix. In the differential scanning calorimetry chart of the ESO/HSA, a thermal transition from the mesophase composed of supramolecular nanofibers to isotropic state was observed at 67 °C (ΔH = 22.6 J/g‐HSA), while the T_m of crystalline HSA is 77.7 °C (ΔH_m = 159 J/g‐HSA). Tensile strength at 20 °C of the ESO‐HSA was ～80% higher than that of photo‐cured ESO without HSA. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 669–673, 2009     

Synthesis and characterization of main chain liquid crystalline ionomers containing sulphonate groups

A series of main chain liquid crystalline ionomers containing sulphonate groups pendent to the polymer backbone were synthesized by an interfacial condensation reaction of 4,4′‐bis(1,10‐sebacyloxo)benzoic acid, brilliant yellow (BY), and 4,4′‐biphenyldiol. 4,4′‐Bis(1,10‐sebacyloxo)benzoic acid exhibited nematic schlieren texture during heating and cooling. The ionomers are thermotropic liquid crystalline polymers and thermally stable to about 270°C. They exhibit broad mesophase regions over a range of 220°C and the same nematic mesomogen with a colourful thread texture as B₀‐LCP, which implies that the introduction of an ionic group did not change the texture of the B₀‐LCP. However, the thermotropic liquid crystalline properties were somewhat weakened when the concentration of BY was more than 5%. The inherent viscosity in N,N‐dimethylformamide solution suggested that intermolecular associations of sulphonate groups occurred at low concentration, and intermolecular associations predominated at higher concentration.     

Poly(arylene ether)s with pendant diphenyl phosphoryl groups: Synthesis,characterization, and thermal properties

A series of poly(arylene ether)s, (PAEs), carrying a pendant diphenyl phosphoryl group were prepared via the nucleophilic aromatic substitution (NAS) reactions of 3,5‐difluorotriphenylphosphine oxide, 6 . The difluoro monomer 6 was synthesized via two‐step reaction sequence and subsequently characterized by ¹H, ¹³C, ¹⁹F, and ³¹P NMR spectroscopy, GC/MS, and elemental analysis. The reactivity of the electrophilic sites in 6 , activated by only a diphenylphosphoryl group located in the meta‐position, in 6 was probed via NMR spectroscopy and model reactions and was determined to be sufficient to undergo typical NAS reactions. High molecular weight, amorphous, organic soluble poly(arylene ether)s, bearing a pendant diphenylphosphoryl group, were prepared via the reaction of 6 with a variety of bis‐phenols under typical NAS conditions. The poly(arylene ether)s were characterized for structure via the use of ¹H, ¹³C, and ³¹P NMR spectroscopy while their thermal properties were evaluated using DSC and TGA analysis. The glass transition temperatures (T_g) of the synthesized PAEs ranged from 143 to 175 °C, while their 5% weight loss temperatures ranged from 467 to 510 °C under nitrogen and from 470 to 526 °C in air. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Thermal transition of a wholly aromatic thermotropic liquid crystalline copolyester

A copolyester was prepared from p-hydroxybenzoic acid (HBA), 2,6-naphthalene dicaboxylic acid (NDA), and hydroquinone (HQ). Thermal transition behavior and the crystal structure of this copolyester were investigated by using polarized light microscopy (PLM), differential scanning calorimetry (DSC), and wide-angle X-ray diffraction (WAXD) after annealing at solid-phase polymerization conditions. A glass transition or newly ordered structure in the 270–290°C range was observed on annealing at 260°C, which increased with annealing time, attributed to mobility and reactive rearrangement in amorphous regions. Broad and unclear WAXD profiles and multimelting behaviors were found on annealing at 280°C, and explained by hexagonal and orthorhombic lattice formation and transformation. A large increase in melting temperature was observed only on annealing at a temperature (320°C) near the crystal–nematic transition, suggesting annealing temperatures near the melting point are required for sufficient mobility to afford crystalline rearrangement via transesterification. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3763–3769, 1999     

Synthesis and properties of novel phosphorus‐containing thermotropic liquid crystalline copoly(ester imide)s

A series of novel phosphorus‐containing polyesterimides were prepared from diols—a mixture of a new aromatic phosphorus‐containing bisphenol, namely 1,4‐bis[N‐(4‐hydroxyphenyl)phthalimidyl‐5‐carboxylate]‐2‐(6‐oxido‐6H‐dibenz<c,e><1,2>oxaphosphorin‐6‐yl)‐naphtalene, with aliphatic diols such as 1,3‐propanediol, 1,4‐butanediol, 1,5‐pentanediol, 1,6‐hexanediol, and 1,12‐dodecanediol—and an aromatic diacid chloride containing two preformed ester groups, namely terephthaloyl‐bis‐(4‐oxibenzoyl‐chloride), via high‐temperature polycondensation in o‐dichlorobenzene. The structures of monomers and polymers were verified by means of Fourier transform infrared (FTIR) spectroscopy and ¹H NMR spectroscopy. The molar ratio of aromatic bisphenol to aliphatic diol was varied to generate a series of copolyesterimides with tailored physicochemical properties, structure–properties relationships being established. The effect of the phosphorus content on the thermal properties and the flame retardancy was evaluated by means of thermogravimetric analysis (TGA), TGA–FTIR, and scanning electron microscopy. The polymers were stable up to 340 °C showing a 5% weight loss in the range of 340–395 °C and a 10% weight loss in the range of 370–415 °C. The char yields at 700 °C were in the range of 13.6–38% increasing with the content of phosphorus‐containing bisphenol. The effect of the aliphatic content on the liquid crystalline behavior was investigated by polarized light microscopy, differential scanning calorimetry, and X‐ray diffraction. The transition temperatures from crystal to liquid crystalline melt were in the range of 209–308 °C. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

X‐ray diffraction study of the thermal expansion behavior of cellulose triacetate I

Highly crystalline samples of cellulose triacetate I (CTA I) were prepared from highly crystalline algal cellulose by heterogeneous acetylation. X‐ray diffraction of the prepared samples was carried out in a helium atmosphere at temperatures ranging from 20 to 250 °C. Changes in seven d‐spacings were observed with increasing temperature due to thermal expansion of the CTA I crystals. Unit cell parameters at specific temperatures were determined from these d‐spacings by the least squares method, and then thermal expansion coefficients (TECs) were calculated. The linear TECs of the a, b, and c axes were α_a = 19.3 × 10^?5 °C^?1, α_b = 0.3 × 10^?5 °C^?1 (T < 130 °C), α_b = ?2.5 × 10^?5 °C^?1 (T > 130 °C), and α_c = ?1.9 × 10^?5 °C^?1, respectively. The volume TEC was β = 15.6 × 10^?5 °C^?1, which is about 1.4 and 2.2 times greater than that of cellulose I_β and cellulose III_I, respectively. This large thermal expansion could occur because no hydrogen bonding exists in CTA I. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 517–523, 2009     

Synthesis and characterization of a thermotropic liquid‐crystalline poly[2,5‐bis(4′‐alkoxycarbonylphenyl) styrene]

We report the synthesis and characterization of a series of novel mesogen‐jacketed liquid‐crystalline polymers, poly[2,5‐bis(4′‐alkoxycarbonylphenyl)styrene]s ( 1‐m , where m is the number of carbon atoms in the alkyl tails), along with the corresponding monomers, 2,5‐bis(4′‐alkoxycarbonylphenyl)styrenes ( 2‐m ), and their precursors, 2,5‐bis(4′‐alkoxycarbonylphenyl)toluenes ( 3‐m ). The influence of the tail length on the thermotropic properties of the two types of low‐molecular‐mass compounds and macromolecules was investigated with a combination of differential scanning calorimetry, polarized optical microscopy, and wide‐angle X‐ray diffraction techniques. Except for compound 3‐3 , which exhibited a monotropic nematic phase, all members of the low‐molar‐mass molecules developed no mesophase during both heating and cooling processes. The glass‐transition temperatures of the polymers decreased as the tail lengths increased. The 5% weight loss temperatures of all the polymers under a nitrogen atmosphere were above 360 °C, indicating quite high thermal stability. Although polymers 1‐1 and 1‐2 were non‐liquid‐crystalline, columnar nematic phases were observed for the remaining homopolymers with longer alkyl tails. The mesophases of 1‐3 to 1‐9 that developed at high temperatures remained upon cooling to room temperature, whereas those of 1‐10 to 1‐12 disappeared during the cooling process. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 830–847, 2007.