A new method for functionalizing α,γ‐dinitro compounds at the β‐position: application to the cyclization of β‐alkoxy‐α,γ‐dinitro compounds

Treatment of 2,4‐dinitropentane with bromine and sodium methoxide in methanol, affords formation of an ether product, 2,4‐dibromo‐3‐methoxy‐2,4‐dinitropentane, in 59% yield as a mixture of three diastereomers. This observation has led to a general synthesis of 3‐alkoxy‐2,4‐dibromo‐2,4‐dinitropentanes, obtained in 75‐86% yield from 2,4‐dibromo‐2,4‐dinitropentane as the preferred reactant. 4‐Bromo‐2,4‐dinitro‐2‐pentene has been identified as an intermediate in these reactions. The nitroalkene has been isolated and undergoes conjugate addition with alkoxides to afford the same ether products after brominative work‐up. The nitroalkene undergoes conjugate addition with sodium azide to give 3‐azido‐2,4‐dibromo‐2,4‐dinitropentane in 38% yield as a mixture of two isomers in which the (R*,R*) isomer predominates. Sequential treatment of 2,4‐dibromo‐2,4‐dinitropentane with sodium methoxide followed by sodium iodide and acetic acid gives 3‐methoxy‐2,4‐dinitropentane in 63% yield, the overall product of simple methoxylation of 2,4‐dinitropentane. However, attempted complete debromination of 2,4‐dibromo‐3‐methoxy‐2,4‐dinitropentane with excess sodium iodide and acetic acid results only in monodebromination to give 2‐bromo‐3‐methoxy‐2,4‐dinitropentane in 86% yield. Likewise, 2‐bromo‐3‐ethoxy‐2,4‐dinitropentane is formed in 93% yield from the ethoxy analog. A mechanistic rationale is offered for condition‐specific removal of the second Br atom in these reactions. Treatment of 3‐methoxy‐2,4‐dinitropentane with potassium acetate/iodine in dimethyl sulfoxide affords formation of 4,5‐dihydro‐3,4‐dimethyl‐3‐methoxy‐4‐nitroisoxazole 2‐oxide in 30% yield as a single diastereomer. Conversion of 2‐bromo‐3‐methoxy‐2,4‐dinitropentane in 15% yield to 4,5‐dihydro‐3,4‐dimethyl‐3‐methoxy‐4‐nitroisoxazole 2‐oxide is also possible by using potassium acetate in dimethyl sulfoxide. The mechanistic pathways for formation of 4,5‐dihydro‐3,4‐dimethyl‐3‐methoxy‐4‐nitroisoxazole 2‐oxide apparently involve unstable 3‐methoxy‐1,2‐dimethyl‐1,2‐dinitrocyclopropane as the common intermediate. Similarly, 2‐bromo‐3‐ethoxy‐2,4‐dinitropentane affords 4,5‐dihydro‐3‐ethoxy‐3,4‐dimethyl‐4‐nitroisoxazole 2‐oxide in 13% yield. Copyright © 2013 John Wiley & Sons, Ltd.     

A combined experimental and density functional study of 1‐(arylsulfonyl)‐2‐R‐4‐chloro‐2‐butenes reactivity towards the allylic chlorine

Nucleophilic substitution and dehydrochlorination reactions of a number of the ring‐substituted 1‐(arylsulfonyl)‐2‐R‐4‐chloro‐2‐butenes are studied both experimentally and theoretically. The developed synthetic procedures are characterized by a general rapidity, cheapness, and simplicity providing moderate to high yields of 1‐arylsulfonyl 1,3‐butadienes (48–95%), 1‐(arylsulfonyl)‐2‐R‐4‐(N,N‐dialkylamino)‐2‐butenes (31–53%), 1‐(arylsulfonyl)‐2‐R‐2‐buten‐4‐ols (37–61%), and bis[4‐(arylsulfonyl)‐3‐R‐but‐2‐enyl]sulfides (40–70%). The density functional theory B3LYP/6‐311++G(2d,2p) calculations of the intermediate allylic cations in acetone revealed their high stability occurring from a resonance stabilization and hyperconjugation by the SO₂Ar group. The reactivity parameters estimated at the bond critical points of the diene/allylic moiety display a high correlation (R² > 0.97) with the Hammett (σ_p) constants. 1‐Arylsulfonyl 1,3‐butadienes are characterized by a partly broken π conjugated system, which follows from analysis of the two‐centered delocalization (δ) and localization (λ) index values. The highest occupied molecular orbital energies of 1‐arylsulfonyl 1,3‐butadienes are lower than those of 1,3‐butadiene explaining their low reactivity towards the Diels–Alder condensation. Copyright © 2015 John Wiley & Sons, Ltd.     

Understanding the stereo‐ and regioselectivities of the polar Diels–Alder reactions between 2‐acetyl‐1,4‐benzoquinone and methyl substituted 1,3‐butadienes: a DFT study

The polar Diels–Alder (DA) reactions of 2‐acetyl‐1,4‐benzoquinone (acBQ) with methyl substituted 1,3‐butadienes have been studied using DFT methods at the B3LYP/6‐31G(d) level of theory. These reactions are characterized by a nucleophilic attack of the unsubstituted ends of the 1,3‐dienes to the β conjugated position of the acBQ followed by ring‐closure. The reactions present a total regioselectivity and large endo selectivity. The analysis based on the global electrophilicity of the reagents at the ground state, and the natural bond orbital (NBO) population analysis at the transition states correctly explain the polar nature of these cycloadditions. The large electrophilic character of acBQ is responsible for the acceleration observed in these polar DA reactions. Copyright © 2008 John Wiley & Sons, Ltd.     

Aza‐Diels–Alder reaction between cyclopentadiene and protonated N‐phenylethyliminoacetates of 8‐phenylmenthol and 8‐phenylneomenthol: a density functional theory study

The cycloaddition between glyoxylate imines possessing two chiral auxiliaries, N‐(R)‐ or N‐(S)‐1‐phenylethyl and 8‐phenylmenthyl or 8‐phenylneomenthyl, and cyclopentadiene is described. Computational calculations using density functional theory with the Becke, three‐parameter, Lee–Yang–Parr functional and the 6‐31G(d) basis set were performed to better understand the highly diastereoselective mechanism and the exo‐selectivity observed experimentally for these ionic aza‐Diels–Alder reactions. Copyright © 2011 John Wiley & Sons, Ltd.     

Theoretical investigation of an unusual substituent effect on the dienophilicity of >CP? functionality present in 2‐phosphaindolizines

Effect of the number and positions of the methoxycarbonyl substituents in 2‐phosphaindolizine on the feasibility of its Diels–Alder (DA) reaction with 1,3‐butadiene has been investigated theoretically at the density functional theory (DFT) level. Among the series of four differently substituted 2‐phosphaindolizines, 3‐methoxycarbonyl‐2‐phosphaindolizine does not undergo the DA reaction due to the highest activation barrier (29.49 kcal mol^?1) and endothermicity, whereas the activation barrier of the corresponding reaction of 1,3‐bis(methoxycarbonyl)‐2‐phosphaindolizine is lowest (22.43 kcal mol^?1) with exothermicity making it possible to occur. This reactivity trend is corroborated by FMO energy gaps as well as by global electrophilicity powers of the reactants. Copyright © 2008 John Wiley & Sons, Ltd.     

Homo‐Diels–Alder reaction of a very inactive diene,bicyclo[2,2,1]hepta‐2,5‐diene,with the most active dienophile, 4‐phenyl‐1,2,4‐triazolin‐3,5‐dione. Solvent,temperature, and high pressure influence on the reaction rate

Solvent, temperature, and high pressure influence on the rate constant of homo‐Diels–Alder cycloaddition reactions of the very active hetero‐dienophile, 4‐phenyl‐1,2,4‐triazolin‐3,5‐dione (1), with the very inactive unconjugated diene, bicyclo[2,2,1]hepta‐2,5‐diene (2), and of 1 with some substituted anthracenes have been studied. The rate constants change amounts to about seven orders of magnitude: from 3.95^.10^?3 for reaction (1+2) to 12200 L mol^?1 s^?1 for reaction of 1 with 9,10‐dimethylanthracene (4e) in toluene solution at 298 K. A comparison of the reactivity (ln k₂) and the heat of reactions (?_r‐nH) of maleic anhydride, tetracyanoethylene and of 1 with several dienes has been performed. The heat of reaction (1+2) is ?218 ± 2 kJ mol^?1, of 1 with 9,10‐dimethylanthracene ?117.8 ± 0.7 kJ mol^?1, and of 1 with 9,10‐dimethoxyanthracene ?91.6 ±0.2 kJ mol^?1. From these data, it follows that the exothermicity of reaction (1+2) is higher than that with 1,3‐butadiene. However, the heat of reaction of 9,10‐dimethylanthracene with 1 (?117.8 kJ mol^?1) is nearly the same as that found for the reaction with the structural C=C counterpart, N‐phenylmaleimide (?117.0 kJ mol^?1). Since the energy of the N=N bond is considerably lower (418 kJ/bond) than that of the C=C bond (611 kJ/bond), it was proposed that this difference in the bond energy can generate a lower barrier of activation in the Diels–Alder cycloaddition reaction with 1. Linear correlation (R = 0.94) of the solvent effect on the rate constants of reaction (1+2) and on the heat of solution of 1 has been observed. The ratio of the volume of activation (?V^≠) and the volume of reaction (?V_r‐n) of the homo‐Diels–Alder reaction (1+2) is considered as “normal”: ?V^≠/?V_r‐n = ?25.1/?30.95 = 0.81. Copyright © 2012 John Wiley & Sons, Ltd.     

Spectroscopic and stability studies on unsymmetrical 1,3‐dialkyl‐1,3‐diphosphacyclobutane‐2,4‐diyls

Air‐tolerant 2,4‐bis(2,4,6‐tri‐t‐butylphenyl)‐1,3‐diphosphacyclobutane‐2,4‐diyl singlet biradicals can be prepared by utilizing the unique reactivity of a kinetically stabilized P≡C triple bond compound. In this procedure, we studied the spectroscopic properties of a fundamental unsymmetrical P‐heterocyclic biradical containing both PEt and PMe moieties, and the effects of the PCH₂OMe group in relation to the stability of the P‐heterocyclic biradical skeleton. The experimentally observed nuclear magnetic resonance and photo‐absorption parameters of 1‐ethyl‐3‐methyl‐2,4‐bis(2,4,6‐tri‐t‐butylphenyl)‐1,3‐diphosphacyclobutane‐2,4‐diyl were discussed based on our previous findings and density functional theory calculations, suggesting particular structural characteristics of the P‐heterocyclic biradical skeleton and aromatic substituent effects on the sp²‐C atoms in the 4‐membered ring. Introduction of the methoxymethyl group in the P₂C₂ biradical moiety gave more stabilized 1,3‐diphosphacyclobutane‐2,4‐diyl derivatives. In comparison with considerably unstable biradicals bearing propargyl substituents, relatively higher lowest unoccupied molecular orbital energies suggest reluctant oxidation of the P‐heterocyclic skeleton. Copyright © 2011 John Wiley & Sons, Ltd.     

Trapping intermediates and comparing relative reactivities: a DFT M06‐2X study on Diels–Alder cycloadditions of butadiene to C60 and C70

All possible types of Diels–Alder cycloadditions of 1,3‐cis‐butadiene to C₆₀ (2 in total) and to C₇₀ (8 in total) were theoretically investigated by the M06‐2X density functional method in gas phase and solutions. An intermediate between the reactant and the transition state was located for each reaction. These intermediates except one have not been experimentally or theoretically reported before. The reactivities of the 10 reactions in both the gas phase and solutions were systematically compared based on the calculated results. The present conclusion agrees with the experimental observations and partly disagrees with the previously theoretical conclusion. Copyright © 2012 John Wiley & Sons, Ltd.     

Selectivity of nitro versus fluoro substitution in arenes in their reactions with charged O‐ and S‐nucleophiles

The relative mobility of nitro and fluoro substituents in 1,3‐dinitro‐ and 1‐fluoro‐3‐nitrobenzenes, 3,5‐dinitro‐ and 3‐fluoro‐5‐nitrobenzotrifluorides under the action of the nucleophiles (2ArYH)·K₂CO₃ and ArY^?K⁺ in solution and the nucleophiles ArYH·K₂CO₃ (Y = O, S) under heterogeneous conditions was studied by a competitive method in DMF at 40–140 °C. The unique dependences of ΔΔH^≠ on ΔΔS^≠ and ΔΔH^≠ on ΔΔG^≠ were determined for all the substrates and nucleophiles. The dependence of the mechanistic pathway on the nucleophile is discussed. Two results are relevant to the reactions studied: (i) substituent effects in the nucleophiles (2ArYH)·K₂CO₃ and ArYH·K₂CO₃ on the activation entropies suggest that the entropy favours the displacement of nitro group; (ii) the negative signs of ΔΔH^≠ and ΔΔS^≠ for the reactions of the nucleophiles ArY^?K⁺ indicate that the enthalpy determines the displacement of nitro group. It is concluded that the selectivity of the reactions with aryloxide and arylthioxide ions cannot be explained by the hard–soft acid–base principle only. Copyright © 2007 John Wiley & Sons, Ltd.     

Diels‐Alder Reaction in microemulsions with ionic liquid

The Diels‐Alder Reaction (DAR) between N‐ethylmaleimide and 2,3‐dimethyl‐1,3‐butadiene was studied in microemulsions with ionic liquid (IL) for the first time. The apparent second‐order rate constants were determined by spectrophotometry in the microemulsion. The effect of solvent on the DAR rate was investigated and interpreted. The experimental results showed that the reaction rate in the microemulsion with IL was enhanced and it was faster than that in pure isooctane and in generic AOT microemulsion. The effect of the IL on the apparent second rate constant (k₂) was explained. The effect of temperature on the reaction rate was studied, and values of apparent activation energy were estimated in various microemulsion with IL. Copyright © 2012 John Wiley & Sons, Ltd.     

Theoretical studies on nitrogen‐rich furoxan‐based heterocyclic derivatives

The density functional theory method was used to study the heats of formation (HOFs), energetic properties, electronic structure of a series of 4,4″‐dinitro(3,3′:4′,3′′)tris([1,2,5]oxadiazole)‐2′‐oxide (3,4‐bis[4′‐nitrofurazan‐3′‐yl]furoxan) derivatives. The results show that the substitution of the nitro group is very useful for improving their HOFs and detonation performances. The HOFs of the title compounds are all positive and larger than those of 1,3,5‐trinitro‐1,3,5‐triazinane and 1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocane. The analysis of oxygen balance shows that the studied compounds need the oxygen in the explosive. Compound A1 has larger detonation velocity and detonation pressure than those of 1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocane and can be regarded as a potential candidate for high‐energy compounds because of the moderate heat of detonation, high density, and high N. In addition, the energy gaps between the highest occupied molecular orbital and lowest unoccupied molecular orbital of the studied compounds are further investigated.     

A DFT study on Diels–Alder cycloadditions of trans‐1,3‐butadiene to C60 and C70

Investigation of the relative reactivity of bonds in fullerenes will provide fundamental theory for the design of fullerene‐based materials. We have theoretically investigated the reactivity of the Diels–Alder (DA) cycloaddition of cis‐1,3‐butadiene to all types of bonds in C₆₀ and C₇₀ using the M06‐2X hybrid density functional theory (DFT) calculations (J. Phys. Org. Chem. 2012, 25 850–855) and have pointed out that the DA cycloadditions of cis and trans forms of 1,3‐butadiene to ethylene have a specially intimate relationship (J. Phys. Org. Chem. 2014, 27 652–660). For the aim of telling a whole story of the DA cycloaddition concerning C₆₀ and C₇₀, the DA cycloadditions of trans‐1,3‐butadiene to all types of bonds in C₆₀ and C₇₀ were explored at the same theoretical level as those of the cis‐1,3‐butadiene. The calculated results related with the trans‐ and cis‐1,3‐butadienes were compared. The potential energy curves of DA cycloadditions of trans‐ and cis‐1,3‐butadiene to C₆₀ and C₇₀ were discussed. The distortion–interaction energy model was employed to elucidate the origin of different reactivity of all kinds of C?C bonds. The solvent effects were examined using the continuum solvent model. These current results, along with our previous research, will help to obtain an overall view of the DA cycloadditions of 1,3‐butadiene to C₆₀ and C₇₀. Copyright © 2014 John Wiley & Sons, Ltd.     

Surfactant‐assisted specific‐acid catalysis of Diels–Alder reactions in aqueous media

Surfactant‐assisted specific‐acid catalysis (SASAC) for Diels–Alder reactions of dienophiles 1 and 4 with cyclopentadiene 2 in aqueous media at 32 °C was studied. This study showed that acidified anionic surfactants (pH 2) such as sodium dodecyl sulfate (SDS) and linear alkylbenzene sulfonic acid (LAS) accelerate Diels—Alder reactions. Conversely, under similar reaction conditions (pH 2) these reactions are inhibited by (acidified) cationic surfactants such as dodecyltrimethylammonium bromide (DTAB), dodecyldimethylammonium bromide (DDAB), and dodecylmethylammonium bromide (DMAB). A modest rate acceleration resulting from the surfactant hydrogen‐bonding capacity is also recorded for the Diels–Alder reaction of naphthoquinones ( 6 ) with cyclopentadiene ( 2 ) in aqueous media at 32 °C. Copyright © 2007 John Wiley & Sons, Ltd.     

Thermal reaction of electron deficient 4‐oxo‐4H‐pyrazole 1,2‐dioxide with cycloheptatriene: the first examples of the formation of an endo‐[4π + 6π]‐cycloadduct and an intramolecular 1,3‐dipolar reaction leading to a heterocage

The reaction of 3,5‐bis(methoxycarbonyl)‐4‐oxo‐4H‐pyrazole 1,2‐dioxide (1a) with 1,3,5‐cycloheptatriene (2b) gave a mixture of the novel endo‐[4 + 6]‐cycloadduct (4ab), anti‐exo‐[4 + 2]‐cycloadduct (5ab), and the heterocage (6ab) derived from the intramolecular 1,3‐dipolar cycloaddition reaction of the syn‐endo‐[4 + 2]‐cycloadduct. Analogous endo‐[4 + 6] selectivity in 1,3‐dipolar cycloadditions has not been reported previously. The X‐ray analysis indicates that 6ab has a very long N_sp3–N_sp3 bond distance of 1.617(4) Å. The cycloaddition behaviour is discussed on the basis of transition‐state structures optimized at the B3LYP/6‐31G(d) level of theory, from which predictions of the peri‐, regio‐, and stereoselectivities agreed well with the experimental results. Copyright © 2012 John Wiley & Sons, Ltd.     

A thorough understanding of the Diels–Alder reaction of 1,3‐butadiene and ethylene

The Diels–Alder (DA) reaction is one of the most important reactions in organic chemistry. The controversy surrounding this reaction as to whether it follows a concerted or stepwise mechanism has existed for a long time. The reaction of 1,3‐butadiene and ethylene is the paradigmatic example of the DA reaction. We have reinvestigated the mechanism of this reaction using density functional theory. The theoretical study considered all types of possible pathways for the reaction of 1,3‐butadiene and ethylene using six functionals at different rungs of Jacob's ladder. Therefore, a complete picture is given for a thorough understanding of the iconic DA reaction, and a new stationary point during the reaction processes has been reported for the first time. The calculated results indicated that three functionals, ωB97X‐D, M06‐2X, and B2‐PLYP, of the fourth and fifth rungs of Jacob's ladder performed well in the investigation of the mechanism of this reaction and that the reliable basis set should be larger than 6‐311+G(2d,p). The cis‐1,3‐butadiene more easily reacted with ethylene compared with 1,3‐butadiene in the trans conformation. The concerted mechanism was found to be energetically favorable, whose energy barrier is around 10 kcal/mol lower than that of the stepwise mechanism. Two investigated solvents, toluene and CH₃CN, had little impact on this simple DA reaction. Copyright © 2014 John Wiley & Sons, Ltd.     

Understanding the kinetic solvent effects on the 1,3‐dipolar cycloaddition of benzonitrile N‐oxide: a DFT study

The kinetic solvent effects on the 1,3‐dipolar cycloaddition (13DC) of benzonitrile N‐oxide with cyclopentene [T. Rispens and J. B. F. N. Engberts, J. Phys. Org. Chem. 2005; 18 , 908–917] have been studied using density functional theory (DFT) at the B3LYP/6‐31G(d) level. Solvent effects were analyzed by means of the polarizable continuum model (PCM). The analysis of the potential energy surface shows that this reaction follows an asynchronous concerted mechanism. The topological analysis of the electron localization function (ELF) of the turning points along the reaction pathway explains the diradical nature of mechanism of this reaction. Inclusion of solvent effects does not substantially modify this behavior. The present study points out that, contrary to Diels–Alder reactions, the increase in the solvent polarity leads to a slow inhibition of the 13DC reaction, because of the low polarity of the transition state. Explicit solvation involving the coordination of one water molecule to the dipole puts in evidence the importance of hydrogen bonding in the modest acceleration of this 13DC reaction. These results are in good agreement with experimental outcomes. Copyright © 2011 John Wiley & Sons, Ltd.     

Aromatic nitro substitution reaction between 4‐nitro‐N‐n‐butyl‐1,8‐naphthalimide and n‐heptanethiol in water–methanol binary mixtures

The second‐order rate constants of thiolysis by n‐heptanethiol on 4‐nitro‐N‐n‐butyl‐1,8‐naphthalimide (4NBN) are strongly affected by the water–methanol binary mixture composition reaching its maximum at around 50% mole fraction. In parallel solvent effects on 4NBN absorption molar extinction coefficient also shows a maximum at this composition region. From the spectroscopic study of reactant and product and the known H‐bond capacity of the mixture a rationalization that involves specific solvent H‐donor interaction with the nitro group is proposed to explain the kinetic data. Present findings also show a convenient methodology to obtain strongly fluorescent imides, valuable for peptide and analogs labeling as well as for thio‐naphthalimide derivatives preparations. Copyright © 2008 John Wiley & Sons, Ltd.     

Experimental survey of the kinetics of acene Diels–Alder reactions

Second‐order rate constants were gathered for solution Diels–Alder reactions of substituted and unsubstituted acenes, with the intention of ascertaining ideal diene–dienophile combinations. Particular focus was placed on the larger ring systems namely tetracene, pentacene, and rubrene. The rate constants between the acenes ranged roughly six orders of magnitude, from the slowest reacting diene, rubrene, to the fastest diene, pentacene. The utilized dienophiles covered a large range of reactivity from 2,3‐dichloromaleic anhydride to tetracyanoethylene. To aid in the interpretation of acene reactivity, constants were compared to the extensive body of Diels–Alder literature with well‐studied dienes such as anthracene and trans‐1‐methoxy‐1,3‐butadiene serving as points of reference. Complex reaction kinetics for the addition of MeTAD and rubrene was found: initial fast consumption generated an intermediate, followed by dramatically slower product formation. The kinetic data creates a foundation for the analysis of prior and future reactions between organic semiconductor acene materials with volatized dienophiles, a surface functionalization technique for enhancing these electronic materials. Copyright © 2015 John Wiley & Sons, Ltd.     

Enols of 2‐nitro‐ and related 2‐substituted malonamides

The structures of 2‐substituted malonamides, YCH(CONR¹R²)CONR³R⁴ (Y = Br, SO₂Me, CONH₂, COMe, and NO₂) were investigated. When Y = Br, R¹R² = R³R⁴ = HEt; Y = SO₂Me, R¹–R⁴ = H and for Y = CONH₂ or CONHPh, R¹–R⁴ = Me, the structure in solution is that of the amide tautomer. X‐ray crystallography shows solid‐state amide structures for Y = SO₂Me or CONH₂, R¹–R⁴ = H. Nitromalonamide displays an enol structure in the solid state with a strong hydrogen bond (O^…O distance = 2.3730 Å at 100 K) and d(OH) ≠ d(O^…H). An apparently symmetric enol was observed in solution, even in appreciable percentages in highly polar solvents such as DMSO‐d₆, but K_enol values decrease on increasing the solvent polarity. The N,N′‐dimethyl derivative is less enolic. Acetylmalonamides display a mixture of enol on the acetyl group and amide in non‐polar solvents, and only the amide in DMSO‐d₆. DFT calculations gave the following order of pK_enol values for Y: H > CONH₂ > COMe ≥ COMe (on acetyl) ≥ MeSO₂ > CN > NO₂ in the gas phase, CHCl₃, and DMSO. The enol on the C?O group is preferred to the aci‐nitro compound, and the N? O? H^…O?C is less favored than the C?O? H^…O?C hydrogen bond. Copyright © 2009 John Wiley & Sons, Ltd.     

Investigation of the possibility of functionalization of C20 fullerene by benzene via Diels–Alder reaction

C₂₀ fullerene, this novel species with all its pentagonal faces has displayed some unique operations in making fast pericyclic reactions. As an example, the high dienophile character of the C₂₀ fullerene and the ability of this species in making an ultra-fast Diels–Alder reaction with 1,3-butadiene, has been recently reported. Moreover, new experimental reports claim that the C₆₀ fullerene, one of the fullerene family, could make a Diels–Alder reaction with the central ring of anthracene and make the ring non-aromatic. These reports may encourage researchers to do more studies on the properties of this small carbon cage.To address this question, the present research has discussed all the reaction channels of the Diels–Alder cycloaddition of benzene molecule as a 1,3-diene with the C₂₀ fullerene in order to answer this question: “Is C₂₀ fullerene able to make a Diels–Alder reaction with this molecule?”.