Hybrid states of Tamm plasmons and exciton-polaritons

We have demonstrated theoretically that it is possible to use the resonant coupling of exciton-polaritons in a planar microcavity and Tamm plasmons at a metal film on the surface of the structure to provide lateral spatial control of the exciton-polaritons within the cavity. The resonant coupling of the Tamm plasmons to cavity exciton-polaritons results in a triplet of hybrid plasmon–exciton-polariton modes with the lowest at a significantly lower energy than that of the unperturbed exciton-polaritons. Further, a patterned metal film on the structure surface can provide a sufficiently large lateral modulation of the excitation energy that localization of the exciton-polaritons within chosen regions of the cavity is possible. We show how the approach opens the way to a practical demonstration of polariton channels, traps, and devices, including logic gates.     

The Casimir interaction of a massive vector field between concentric spherical bodies

The Casimir interaction energy due to the vacuum fluctuations of a massive vector field between two perfectly conducting concentric spherical bodies is computed. The TE contribution to the Casimir interaction energy is a direct generalization of the massless case but the TM contribution is much more complicated. Each TM mode is a linear combination of a transverse mode which is the generalization of a TM mode in the massless case and a longitudinal mode that does not appear in the massless case. In contrast to the case of two parallel perfectly conducting plates, there are no TM discrete modes that vanish identically in the perfectly conducting spherical bodies. Numerical simulations show that the Casimir interaction force between the two bodies is always attractive.     

The Casimir energy of the rigid string with massive ends

The Casimir energy in the rigid string with massive ends is investigated. This system models the flux tube of finite thickness that connects the massive quarks. The string stiffness and quark mass give additive contributions to the Casimir energy, the second contribution being the same as in the Nambu-Goto string with massive ends. The string stiffness results in an additional positive contribution to the Casimir energy, however it alone does not compensate the negative Casimir energy in the Nambu-Goto string. Only common consideration of the string thickness and the quark mass enables one to get the positive Casimir energy, i.e. to remove the tachyon from the string spectrum.     

Influence of surface electronic structure on the Casimir force

Recent nonlocal microscopic theory of Casimir force which expresses the interaction energy between two metallic slabs in terms of surface polariton propagators calculated from diamagnetic and paramagnetic current-current response functions, sensitive to details of the surface electron density profiles and single-particle excitations on the surfaces, is used here to calculate various contributions to the Casimir energies for a silver film described by two different models. Current-current response functions are constructed from energy levels and wave functions obtained in two different models: jellium and Chulkov one-dimensional model potential, and the results are compared with the local plasmon model results. The results show how the details of such surface electronic structure modify Casimir force.     

Variations of Casimir energy from a superconducting transition

We consider a five-layer Casimir cavity, including a thin superconducting film. We show that when the cavity is cooled below the critical temperature for the onset of superconductivity, the sharp variation (in the microwave region) of the reflection coefficient of the film produces a variation in the value of the Casimir energy. Even though the relative variation in the Casimir energy is very small, its magnitude can be comparable to the condensation energy of the superconducting film, and thus causes a significant increase in the value of the critical magnetic field, required to destroy the superconductivity of the film. The proposed scheme might also help clarifying the current controversy about the magnitude of the contribution to Casimir free energy from the TE zero mode, as we find that alternative treatments of this mode strongly affect the shift of critical field.     

Quantification of surface effects: Monte Carlo simulation of REELS spectra to obtain surface excitation parameter

The surface excitation effect is investigated by using the quantum mechanical frame work of complex self-energy of electrons which interact with a bounded semi-infinite medium. In the self-energy formalism, differential inverse inelastic mean free path (DIIMFP) has contributions from bulk and surface plasmons. Monte Carlo simulation of the interaction of electrons with a solid medium and surface has been performed. The surface excitation parameter (SEP) is then obtained from the simulated reflection electron energy loss spectroscopy (REELS) spectra. The calculated SEP results by Monte Carlo simulation are compared with the previous calculations of total surface excitation probability, which was estimated by a numerical integration of surface term of DIIMFP. The contribution merely due to surface excitations towards REELS spectra is extracted by subtracting the two Monte Carlo simulated REELS spectra that based on the two models of electron inelastic scattering, i.e. a full surface model (SM) and a pure bulk model (BM). The surface excitations found to be significant at low energy losses and diminish at higher energy losses whereas the bulk plasmon contributions show opposite behavior and are negligible at lower energy losses. The average number of surface excitations is then evaluated by the computation of ratio of the integrated surface contribution to the elastic peak. The calculated results for Ag are found to be reasonably in agreement with our previous results for total probability of surface excitations and other reported experimental data for SEP. Surface correction factor (SCF) is calculated using SEP for several metals and is compared with the reported ratio of SCF with Ni sample as reference.     

Surface plasmons in a free-electron metal

The dispersion and damping of the surface plasmons are calculated for a free-electron model of Al. At large wave-vector the frequency of the surface plasmons approaches that of the bulk plasmons. Their damping remains quite small up to a wave-vector close to the bulk plasmon cut-off. The change in zero-point energy of the plasmons is calculated, and it gives a large positive contribution to the surface energy.     

Experimental measurement of acoustic plasmons in polycrystalline palladium

An experimental study of collective oscillations in Pd covering the region of very low energy and momentum transfers is reported. Through Dynamic Electron Scattering spectroscopy, structure factor spectra were measured from 80?K to 298?K on a bulk polycrystalline Pd sample. Here we report the first experimental evidence of damped acoustic plasmons and their evolution to the single-particle excitation continuum. The acoustic plasmons follow a linear dispersion and are experimentally shown to be a separate and distinct resonance mode from acoustic surface plasmons. Calculations of the dielectric function employed a model that incorporates complete mixing of two conduction bands with contributions from both interband and intraband transitions. The model was used in computational studies that focused on specific experimental results to aid the characterization and understanding of the plasmon behavior. We found that the Pd acoustic plasmon energy matched the longitudinal phonon anomaly that has sparked numerous theoretical reports on the possible energetic coupling of these modes. Further experimental evidence of plasmon and phonon dynamical processes are found in the linewidth analysis of the data. The primary decay mechanism of the plasmons is interpreted to be strong phonon-assisted interband transitions. Further spectral features and the plasmon velocity are also reported.     

Finite-temperature Casimir effect in piston geometry and its classical limit

We consider the Casimir force acting on a d-dimensional rectangular piston due to a massless scalar field with periodic, Dirichlet and Neumann boundary conditions and an electromagnetic field with perfect electric-conductor and perfect magnetic-conductor boundary conditions. The Casimir energy in a rectangular cavity is derived using the cut-off method. It is shown that the divergent part of the Casimir energy does not contribute to the Casimir force acting on the piston, thus renders an unambiguously defined Casimir force acting on the piston. At any temperature, it is found that the Casimir force acting on the piston increases from −∞ to 0 when the separation a between the piston and the opposite wall increases from 0 to ∞. This implies that the Casimir force is always an attractive force pulling the piston towards the closer wall, and the magnitude of the force gets larger as the separation a gets smaller. Explicit exact expressions for the Casimir force for small and large plate separations and for low and high temperatures are computed. The limits of the Casimir force acting on the piston when some pairs of transversal plates are large are also derived. An interesting result regarding the influence of temperature is that in contrast to the conventional result that the leading term of the Casimir force acting on a wall of a rectangular cavity at high temperature is the Stefan–Boltzmann (or black-body radiation) term which is of order T ^d+1, it is found that the contributions of this term from the two regions separating the piston cancel with each other in the case of piston. The high-temperature leading-order term of the Casimir force acting on the piston is of order T, which shows that the Casimir force has a nontrivial classical ℏ→0 limit. Explicit formulas for the classical limit are computed.     

柱环腔中的量子电动力学效应

研究以同轴不同半径柱面围成的导体柱环腔体中电磁场真空零点振动模式所给出的宏观量子效应.零点振动模式通过求解柱环空腔边界条件下无源的Maxwell方程组获得.得到了双柱面同心柱环中单位长度和单位面积的且是有限的真空能量，即Casimir能量.这有限的Casimir能量可以分解为独立而且收敛的三部分，它们分别来自内柱面、外柱面和柱环之中.对多柱面同心柱环，Casimir能量可分解为独立的（2n—1）部分（n为柱面数）.柱环是类似于平行板的几何结构.但柱环所给出的Casimir能量和Casimir势能系数是随着 关键词： Casimir效应 柱环腔体 零点能 量子电动力学     

Fermionic vacuum polarization in compactified cosmic string spacetime

We investigate the fermionic condensate and the vacuum expectation value (VEV) of the energy-momentum tensor for a charged massive fermionic field in the geometry of a cosmic string compactified along its axis. In addition, we assume the presence of two types of magnetic fluxes: a flux running along the cosmic string and another enclosed by the compact dimension. These fluxes give rise to Aharanov–Bohm-like effects on the VEVs. The VEVs are decomposed into two parts corresponding to the geometry of a straight cosmic string without compactification plus a topological part induced by the compactification of the string axis. Both contributions are even periodic functions of the magnetic fluxes with period equal to the flux quantum. The vacuum energy density is equal to the radial stress for the parts corresponding to the straight cosmic string and the topological one. Moreover, the axial stress is equal to the energy density for the parts corresponding to the straight cosmic string; however, for massive fermionic fields this does not occur for the topological contributions. With respect to the dependence on the magnetic fluxes, both the fermionic condensate and the vacuum energy density, can be either positive or negative. Moreover, for points near the string, the main contribution to the VEVs comes from the straight cosmic string part, whereas at large distances the topological ones dominate. In addition to the local characteristics of the vacuum state, we also evaluate the part in the topological Casimir energy induced by the string.     

On the role of interband surface plasmons in carbon nanotubes

We review the properties of collective surface excitations—excitons and interband plasmons—in single-walled and double-walled carbon nanotubes. We show that an electrostatic field applied perpendicular to the nanotube axis can control the exciton-plasmon coupling in individual small-diameter (≲nm) singlewalled nanotubes, both in the linear excitation regime and in the non-linear excitation regime with the photoinduced biexcitonic states formation. For double-walled carbon nanotubes, we report a profound effect of interband surface plasmons on the inter-tube Casimir force at tube separations similar to their equilibrium distances. Strong overlapping plasmon resonances from both tubes warrant their stronger attraction. Nanotube chiralities possessing such collective excitation features will result in forming the most favorable innerouter tube combination in double-walled carbon nanotubes. These findings pave the way for the development of new generation of tunable optoelectronic and nano-electromechanical device applications with carbon nanotubes.     

Nano-infrared imaging of localized plasmons in graphene nano-resonators

We conduct in-situ near-field imaging of propagating and localized plasmons(cavity and dipole modes) in graphene nano-resonator. Compared with propagating graphene plasmons, the localized modes show twofold near-field amplitude and high volume confining ability(~ 10~6). The cavity resonance and dipole mode of graphene plasmons can be effectively controlled through optical method. Furthermore, our numerical simulation shows quantitative agreement with experimental measurements. The results provide insights into the nature of localized graphene plasmons and demonstrate a new way to study the localization of polaritons in Van der Waals materials.     

Towards measuring variations of Casimir energy by a superconducting cavity

We consider a Casimir cavity, one plate of which is a thin superconducting film. We show that when the cavity is cooled below the critical temperature for the onset of superconductivity, the sharp variation (in the far infrared) of the reflection coefficient of the film engenders a variation in the value of the Casimir energy. Even though the relative variation in the Casimir energy is very small, its magnitude can be comparable to the condensation energy of the superconducting film, and this gives rise to a number of testable effects, including a significant increase in the value of the critical magnetic field, required to destroy the superconductivity of the film. The theoretical ground is therefore prepared for the first experiment ever aimed at measuring variations of the Casimir energy itself.     

Casimir effect for a Cavity in the Spacetime with an Extra Dimension

We reexamine the Casimir effect for the rectangular cavity with two or three equal edges in the presence of compactified universal extra dimension. We derive the expressions for the Casimir energy and discuss the nature of Casimir force. We show analytically the extra-dimension corrections to the standard Casimir effect to put forward a new method of exploring the existence of extra dimensions of the Universe.     

Tailoring terahertz near-field enhancement via two-dimensional plasmons

We suggest a novel possibility for electrically tunable terahertz near-field enhancement in flatland electronic materials supporting two-dimensional plasmons, including recently discovered graphene. We employ electric-field effect modulation of electron density in such materials and induce a periodic plasmonic lattice with a defect cavity. We demonstrate that the plasmons resonantly excited in such a periodic plasmonic lattice by an incident terahertz radiation can strongly pump the cavity plasmon modes leading to a deep subwavelength concentration of terahertz energy, beyond λ/1000, with giant electric-field enhancement factors up to 10(4), which is 2 orders of magnitude higher than achieved previously in metal-based terahertz field concentrators.     

Casimir interaction among objects immersed in a fermionic environment

Using ensembles of two, three, and four spheres immersed in a fermionic background we evaluate the (integrated) density of states and the Casimir energy. We thus infer that for sufficiently smooth objects, whose various geometric characteristic lengths are larger then the Fermi wave length one can use the simplest semiclassical approximation (the contribution due shortest periodic orbits only) to evaluate the Casimir energy. We also show that the Casimir energy for several objects can be represented fairly accurately as a sum of pairwise Casimir interactions between pairs of objects.     

Casimir stress in an inhomogeneous medium

The Casimir effect in an inhomogeneous dielectric is investigated using Lifshitz’s theory of electromagnetic vacuum energy. A permittivity function that depends continuously on one Cartesian coordinate is chosen, bounded on each side by homogeneous dielectrics. The result for the Casimir stress is infinite everywhere inside the inhomogeneous region, a divergence that does not occur for piece-wise homogeneous dielectrics with planar boundaries. A Casimir force per unit volume can be extracted from the infinite stress but it diverges on the boundaries between the inhomogeneous medium and the homogeneous dielectrics. An alternative regularization of the vacuum stress is considered that removes the contribution of the inhomogeneity over small distances, where macroscopic electromagnetism is invalid. The alternative regularization yields a finite Casimir stress inside the inhomogeneous region, but the stress and force per unit volume diverge on the boundaries with the homogeneous dielectrics. The case of inhomogeneous dielectrics with planar boundaries thus falls outside the current understanding of the Casimir effect.     

A microscopic approach to Casimir and Casimir–Polder forces between metallic bodies

We consider the Casimir–Polder interaction energy between a metallic nanoparticle and a metallic plate, as well as the Casimir interaction energy between two macroscopic metal plates, in terms of the many-body dispersion interactions between their constituents. Expressions for two- and three-body dispersion interactions between the microscopic parts of a real metal are first obtained, both in the retarded and non-retarded limits. These expressions are then used to evaluate the overall two- and three-body contributions to the macroscopic Casimir–Polder and Casimir force, and to compare them with each other, for the two following geometries: metal nanoparticle/half-space and half-space/half-space, where all the materials are assumed perfect conductors. The above evaluation is obtained by summing up the contributions from the microscopic constituents of the bodies (metal nanoparticles). In the case of nanoparticle/half-space, our results fully agree with those that can be extracted from the corresponding macroscopic results, and explicitly show the non-applicability of the pairwise approximation for the geometry considered. In both cases, we find that, while the overall two-body contribution yields an attractive force, the overall three-body contribution is repulsive. Also, they turn out to be of the same order, consistently with the known non applicability of the pairwise approximation. The issue of the rapidity of convergence of the many-body expansion is also briefly discussed.     

Thermal Casimir effect in ideal metal rectangular boxes

The thermal Casimir effect in ideal metal rectangular boxes is considered using the method of zeta functional regularization. A renormalization procedure is suggested which provides the finite expression for the Casimir free energy in any restricted quantization volume. This expression satisfies the classical limit at high temperature and leads to zero thermal Casimir force for systems with infinite characteristic dimensions. In the case of two parallel ideal metal planes the results, as derived previously using thermal quantum field theory in Matsubara formulation and other methods, are reproduced starting from the expression obtained. It is shown that for rectangular boxes the temperature-dependent contribution to the electromagnetic Casimir force can be both positive and negative depending on side lengths. Numerical computations of the scalar and electromagnetic Casimir free energy and force are performed for cubes.