Redox‐Driven Symmetry Change for Terbium(III) Bis(porphyrinato) Double‐Decker Complexes by the Azimuthal Rotation of the Porphyrin Macrocycles

Molecular structures for three oxidation forms (anion, radical, and cation) of terbium(III) bis(porphyrinato) double‐decker complexes have been systematically studied. We found that the redox state controls the azimuthal rotation angle (φ) between the two porphyrin macrocycles. For [Tb^III(tpp)₂]ⁿ (tpp: tetraphenylporphyrinato, n=?1, 0, and +1), φ decreases at each stage of the oxidation process. The decrease in φ is due to the higher steric repulsion between the phenyl rings on the porphyrin macrocycle and the β hydrogen atoms on the other porphyrin macrocycle, which results from the shorter interfacial distance between the two porphyrin macrocycles. Conversely, φ=45° for both [Tb^III(oep)₂]^?1 and [Tb^III(oep)₂]⁰ (oep: octaethylporphyrinato), but φ=36° for [Tb^III(oep)₂]⁺¹. Theoretical calculations suggest that the smaller azimuthal rotation angle of the cation form is due to the electronic interaction in the doubly oxidized ligand system.     

Matrix-IR-Untersuchungen von molekularem SPF

Matrix I.R. Investigations of Molecular SPF Molecular SPF is generated at 1050 K under high-vacuum conditions when P(S)FBr₂ is passed over silber. After cocondensation of the high-temperature gas mixture with an excess of argon the two stretching vibrations and the deformation mode are observed in the matrix infrared spectrum: v(SP) 720.2 cm^?1; v(PF) 791.4 cm^?1; δ(SPF) 313.6 cm^?1. The normal coordinate analyses shows, that in SPF phosphorus is the central atom. Force constants are compared with those of similar molecules.     

Matrix-Ir-Untersuchungen von molekularem SPBr

Matrix I.R. investigations of Molecular SPBr Molecular SPBr is generated at 800 K under high-vacuum conditions when SPBr₃ is passed over silver. After cocondensation of sich a high-temperature gas mixture with an excess of argon the two streching vibrations and the overtone of the bending mode are observed in the matrix infrared spectrum: v(PS) 712 cm^?1, v(PBr) 372 cm^?1, 2δ(SPBr) 369 cm^?1. The normal coordinate analyses including ³⁴S/³²S- and ⁸¹Br/⁷⁹Br isotopic shifts, that in SPBr phosphorus is the central atom. Force constants are compared with those of similar molecules.     

a,a,a,b-ZnT(o-BocThr)APP对咪唑衍生物和氨基酸酯的分子识别研究

Molecular Recognition of α,α,α,β-ZnT（o-BocThr）APP （1） toward a series of imidazole derivatives and amino acid esters was investigated. Association constants were determined in chloroform by means of UV-Vis titration method. The association constants of 1 with imidazole derivatives are larger than those of 1 with amino acid esters. 1H NMR spectra were investigated to describe the binding mode of the recognition system, showing that all the protons of the guests were shifted to upfield. The circular dichroism spectra of 1-L-/D-ValOMe showed a split cotton effect in Soret region, while those of 1-L-/D-PheOMe showed no split cotton effect. Molecular modeling was performed to understand chiral recognition on a molecular level. Quantum chemical calculation was carried out based on the stable conformations of these recognition systems, which gave a reasonable explanation for the behavior of molecular recognition. The results indicated that the conformation of 1-D-ValOMe was more stable than that of 1-L-ValOMe.     

Rationalizing some experimental facts on the complexation of 2-methyl naphthalenecarboxylate and hydroxypropyled cyclodextrins by molecular mechanics and molecular dynamics

Molecular mechanics (MM) and Molecular dynamics (MD) calculations were applied to study the complexation of 2-Methyl naphthalenecarboxylate (2MN) and 2-hydroxypropyl -α-, -β-, and γ-cyclodextrins (HPCDs) in the presence of water. Results showed that 1:1 complexes of 2MN with modified cyclodextrins are stable and that the non-bonded van der Waals interactions are mainly responsible for the complexation. Theoretical results are in good agreement with fluoresence results and they permit us to explain the signs and quantitative differences of ΔH ⁰ and ΔS ⁰ on the basis of the different cavity sizes and the movement of the guest inside the HPCD cavity. Results also reveal a more favorable complexation when 2MN approaches on its polar side.     

Polymerization of acrylamide initiated by Ce4+/L-cysteine redox system

Summary The polymerization of acrylamide initiated by Ce 4⁴⁺/L-cysteine redox system has been studied at 35 ± 0.2 °C in dark under nitrogen atmosphere. The effect of monomer,L-cysteine, Ce⁴⁺ and sulphuric acid concentration and temperature on the rate of polymerization has been studied. The rate may be expressed by the following equation:R _p [M] [Ce⁴⁺]^0.5 [Cysteine]^0.44 The overall energy of activation is 4.78 kcal/deg/mole in the investigated range of temperature 30–50 °C. Molecular weight of the polymer is independent of catalyst concentration but increases with increasing monomer concentration.     

Valence 4p functions for the first-row transition metal atoms

For the valence 4p orbitals of the first-row transition metal atoms Sc through Zn, Gaussian-type basis functions are developed referring to excited 3d ^m 4s ¹4p ¹ electronic configurations. Molecular tests of the present work 4p sets are performed for the Cu atom, the diatomic Cu₂ molecule, and Cu₉ and Cu₁₃ clusters, and the results are compared with those from two literature sets. Received: 17 January 2000 / Accepted: 30 May 2000 / Published Online: 11 September 2000     

Kinetics of the Reaction of 2‐Chloro‐3,5‐dinitrobenzotriflouride with Aniline in Toluene and Methanol‐Toluene Mixed Solvents

Kinetics of the reaction of 2‐chloro‐3,5‐dinitrobenzotriflouride with aniline were studied in toluene, methanol‐toluene binary solvents, benzene and chloroform. The reaction in toluene exhibits third‐order kinetics consistent with aggregates of aniline. Thermodynamic parameters (H^#, (S^# and (G^#are calculated and discussed for the reaction of 2‐chloro‐3,5‐dinitrobenzotriflouride with aniline in methanol‐toluene. Molecular complexes between aniline and the substrate are rejected spectrophotometricaly. The mechanism is studied and compared with the reaction in presence of pyridine. It shows an amine dependence and formation of homo and/or hetero mixed aggregates between aniline and pyridine i.e. dimer mechanism.     

Structural evidence for the arc-shaped topology of hetero[5]polynorbornanes

Two novel polarofacial-[5]-polynorbornanes, O ² N ₂ O ²– and COCOC–, were synthesized by cycloaddition reactions and their molecular and crystal structures were determined. These hetero[5]polynorbornanes posses heteroatoms at the norbornene bridges located at the outer convex surface, whereas functionalities are positioned on the inner concave surface. Molecular structures attest the extent of the curvature of their polycyclic backbone, and established that the COCOC-[5]-polynorbornane possesses more curved topology due to larger steric repulsion of 7-norbornane bridges. These experimental results are in good agreement with computational predictions of geometry. Quantum chemical study has identified lone pair repulsive interactions and steric repulsions of bridges as important factors for determining curvature.     

Aqueous polymerization of acrylonitrile by ascorbic acid–peroxodisulfate redox system

The polymerization of acrylonitrile initiated by an ascorbic acid–peroxodisulfate redox system was studied in an aqueous solution at 35°C in the presence of air. Molecular oxygen was found to have no effect on the polymerization reaction. An increase in ionic strength slightly increased the rate. The overall rate of polymerization, R_p, showed a square dependence on [monomer] and a half-order dependence on [peroxodisulfate]. A first-order dependence on [ascorbic acid] at low concentrations (<3.0 × 10^?3 mol L^?1) followed by a decrease in R_p at higher concentrations of ascorbic acid (>3.0 × 10^?3 mol L^?1) was also noted. R_p remained unchanged up to 40°C and showed a decline thereafter. Addition of catalytic amounts of cupric ions decreased the rate whereas ferric ions were found to increase the rate. Added sulfuric acid in the range (6.0?50.0) × 10^?5 mol L^?1 decreased the R_p.     

Peroxygenase-Catalysed Selective Oxidation of Silanes to Silanols

A peroxygenase-catalysed hydroxylation of organosilanes is reported. The recombinant peroxygenase from Agrocybe aegerita (AaeUPO) enabled efficient conversion of a broad range of silane starting materials in attractive productivities (up to 300 mM h⁻¹), catalyst performance (up to 84 s⁻¹ and more than 120 000 catalytic turnovers). Molecular modelling of the enzyme-substrate interaction puts a basis for the mechanistic understanding of AaeUPO selectivity.     

Nickel Confined in the Interlayer Region of Birnessite: an Active Electrocatalyst for Water Oxidation

We report a synthetic method to enhance the electrocatalytic activity of birnessite for the oxygen evolution reaction (OER) by intercalating Ni²⁺ ions into the interlayer region. Electrocatalytic studies showed that nickel (7.7 atomic %)‐intercalated birnessite exhibits an overpotential (η) of 400 mV for OER at an anodic current of 10 mA cm^?2. This η is significantly lower than the η values for birnessite (η≈700 mV) and the active OER catalyst β‐Ni(OH)₂ (η≈550 mV). Molecular dynamics simulations suggest that a competition among the interactions between the nickel cation, water, and birnessite promote redox chemistry in the spatially confined interlayer region.     

COMFA of the acute toxicity of phenylsulfonyl carboxylates to Vibrio fischeri

From the Comparative Molecular Field Analysis (CoMFA) method, the paper describes a three-dimentional quantitative structure–activity relationship (3D-QSAR) model for the acute toxicity log EC₅₀ (15min-EC₅₀ in μmoll^-l) of 56 phenylsulfonyl carboxylates on Vibrio fischeri. The achievement of a high leave-one-out (LOO) cross-validated correlation coefficient q² of 0.790 with four optimum components indicates the significance of the correlation of the steric and electrostatic fields with the biological activities. The key features in the CoMFA contour maps are critical to trace the important properties and gain insight into the toxic mechanism of the tested phenylsulfonyl carboxylates.     

Electroninitiated polymerization of bis(trichlorophenoxo)-tetramethylethylene diamine copper(II)

Electroninitiated polymerization of bis(trichlorophenoxo)-N,N,N′,N′-tetramethylethylene diamine copper(II) was achieved in acetonitrile at various peak potentials of the monomer. A constant potential approach was selected in polymerization reactions. Electrolyses were carried out under air, nitrogen, and oxygen atmospheres. Structural analyses of the polymers were done by ¹H-NMR and ¹³C-NMR FT–IR spectroscopy. Molecular weights of the polymers were determined by vapor pressure (isopiestic) method.     

Revised molecular constants for the E 1Σ state of the diatomic CuI molecule

A least-squares computer program has been used to fit the observed rotational line positions of the E ¹Σ-X ¹Σ band system of the Cul molecule. Molecular constants of the E state have been revised and higher vibrational terms in the rotational and centrifugal constants have been obtained.     

Hazard Evaluation of Ten Organophosphorus Insecticides Against the Midge,Chironomus riparius via QSAR

Abstract

Toxicities of ten organophosphorus (OP) insecticides were measured against midge larvae (Chironomus riparius) under varying temperature (11, 18, and 25°C) and pH (6, 7, and 8) conditions and with and without sediment. Toxicity usually increased with increasing temperature and was greater in the absence of sediment. No trend was found with varying pH. A series of unidimensional parameters and multidimensional models were used to describe the changes in toxicity. Log K _ow was able to explain about 40–60% of the variability in response data for aqueous exposures while molecular volume and aqueous solubility were less predictive. Likewise, the linear solvation energy relationship (LSER) model only explained 40–70% of the response variability, suggesting that factors other than solubility were most important for producing the observed response. Molecular connectivity was the most useful for describing the variability in the response. In the absence of sediment, ¹χ ^v and ³κ were best able to describe the variation in response among all compounds at each pH (70–90%). In the presence of sediment, even molecular connectivity could not describe the variability until the partitioning potential to sediment was accounted for by assuming equilibrium partitioning. After correcting for partitioning, the same molecular connectivity terms as in the aqueous exposures described most of the variability, 61–87%, except for the 11°C data where correlations were not significant. Molecular connectivity was a better tool than LSER or the unidimensional variables to explain the steric fitness of OP insecticides which was crucial to the toxicity.     

Quantum semiempirical study on the reactivity of silylated diamines in the synthesis of aromatic polyamides

The reasons for the reactivity increase toward acyl chlorides caused in aromatic amines by silylation are studied by quantum semiempirical and ab initio methods. Silylated amino groups adopt an sp² planar geometry, in contrast to that observed in the unsilylated series, where a partially pyramidal structure intermediate between sp³ and sp² geometry was obtained. Silylation also causes a strong increase of electronic density on the amine nitrogen and an increase of the Highest Occupied Molecular Orbital (HOMO) energy, both effects favoring the higher reactivity of these silylated amines. In addition to that, silylation produces a decrease of the activation energy in the reaction with an acyl chloride, relative to the unsilylated amines, thus increasing reaction rate.     

Laser Ablation Molecular Isotopic Spectrometry: Parameter influence on boron isotope measurements

Laser Ablation Molecular Isotopic Spectrometry (LAMIS) was recently reported for optical isotopic analysis of condensed samples in ambient air and at ambient pressure. LAMIS utilizes molecular emissions which exhibit larger isotopic spectral shits than in atomic transitions. For boron monoxide ¹⁰BO and ¹¹BO, the isotopic shifts extend from 114 cm⁻¹ (0.74 nm) to 145–238 cm⁻¹ (5–8 nm) at the B²Σ⁺ (v = 0) → X²Σ⁺ (v = 2) and A²Π_i (v = 0) → X²Σ⁺ (v = 3) transitions, respectively. These molecular isotopic shifts are over two orders of magnitude larger than the maximum isotopic shift of approximately 0.6 cm⁻¹ in atomic boron. This paper describes how boron isotope abundance can be quantitatively determined using LAMIS and how atomic, ionic, and molecular optical emission develops in a plasma emanating from laser ablation of solid samples with various boron isotopic composition. We demonstrate that requirements for spectral resolution of the measurement system can be significantly relaxed when the isotopic abundance ratio is determined using chemometric analysis of spectra. Sensitivity can be improved by using a second slightly delayed laser pulse arriving into an expanding plume created by the first ablation pulse.     

Molecular orbital study on the active center of lactate dehydrogenase

In the active site of lactate dehydrogenase important roles are given to aminoacids His195 and Arg171. The coenzyme nicotinamide adenine dinucleotide (NAD) is required in oxidized form (NAD⁺) for the enzymatic oxidation of the substrate L-lactate. Molecular orbital methods CNDO /2, INDO , and EHT were applied to the study of the model of active center of lactate dehydrogenase. An energetically preferred arrangement of the models of His195, Arg171, NAD⁺, and lactate was found. Possible biochemical aspects of these arrangements are discussed.