Highly efficient synthesis of azabicyclo[x.y.0]alkane amino acids and congeners by means of Rh-catalyzed cyclohydrocarbonylation

A highly efficient method for the synthesis of 1-azabicyclo[x.y.0]alkane amino acid derivatives and their congeners by means of extremely regioselective cyclohydrocarbonylation (CHC) is described. The CHC reactions are catalyzed by Rh-BIPHEPHOS complex under mild conditions. These CHC reaction processes involve (i) an extremely linear-selective hydroformylation of the terminal alkene moiety of a dehydrodipeptide substrate, (ii) intramolecular condensation to form cyclic N-acyliminium key intermediate, and (iii) the second cyclization through intramolecular nucleophilic addition of a heteoatom nucleophile to the cyclic N-acyliminium moiety to afford the corresponding 1-azabicyclo[x.y.0] system. This consecutive double cyclization process proceeds with extremely high diastereoselectivity in most cases. This method has been successfully applied to the syntheses of 1-azabicyclo[4.4.0], -[5.4.0], and -[4.3.0] systems. The mechanisms of the reactions and the rationale for the observed extremely high diastereoselectivity are presented. This Rh-catalyzed CHC process would serve as a highly efficient and versatile method for the syntheses of a variety of conformationally restrained dipeptides, peptidomimetics, alkaloids, and other biologically active natural or unnatural products.     

Thermodynamic study of heptane + secondary, tertiary and cyclic amines mixtures. Part IV. Excess and solvation enthalpies at 298.15 K

Partial molar enthalpies and excess enthalpies H^E of binary mixtures of heptane + secondary and tertiary n-alkyl, primary cycloalkyl, and secondary (hetero)cyclic amines have been determined at 298.15 K by isothermal titration calorimetry in the whole composition range. All mixtures showed positive H^E values which decrease with increasing amine size in each category, and decrease in the order cyclic primary > cyclic secondary > linear primary [1] > secondary > tertiary when comparing amines of similar size in different categories. From partial molar enthalpies at infinite dilution and known enthalpies of vaporization, the solvation enthalpies have been calculated either for heptane in amines and for amines in heptane. These quantities, together with their cavitational and interactional terms obtained applying the scaled particle theory, are discussed to get insight into the types and relative strength of solute-solvent interactions and into their effects on molecular structure features such as branching and cyclization.     

Synthesis of angular triquinanes from 1-Alkynylbicyclo[3.2. 0]hept-2-en-7-ones. A tandem alkoxy-cope ring Expansion/Transannular ring closure reaction

Addition of ethenyllithium reagents to the carbonyl group of dialkyl squarate-derived 1-alkynylbicyclo[3.2.0]hept-2-ene-7-ones (15), followed by a TBAF workup, results in a low-temperature anion-accelerated alkoxy-Cope rearrangement which proceeds by way of a strained cyclic allene intermediates (e.g.,17). This leads to the formation of angularly fused triquinanes (e.g., 20) in which each of the rings is functionally differentiated. Bicyclo[6.3. 0]undecadienones (e.g., 36) are the major products when the reactions are quenched with aqueous bicarbonate rather than TBAF. Under analogous conditions 2-alkylidene-1-alkynylbicyclo[3.2. 0]heptan-7-ones also give bicyclo[6.3.0]undecadienones by a mechanism that was established to involve a 1,5-hydrgen shift in a strained allene intermediate. The synthetic scope and mechanism of these and related transformations are discussed.     

Template-directed synthesis of macrocyclic aminopyridines: azacalix[n](2,6)pyridines (n = 3, 4)

Template-induced synthetic routes for azacalix[n](2,6)pyridines (n = 3, 4) have been elaborated. The proton and nickel ion served as the efficient template for the cyclization reactions, and the presence of the templates preferentially afforded the cyclic trimers and tetramers in moderate to good yields, respectively. The compatibility of the cyclic tetramer with nickel ion was also confirmed by X-ray crystallography.     

Oxidative addition of cyclic 1-oxa-5,6-ditelluraspirooctane to platinum(0) complexes

The oxidative addition of cyclic ditelluride 1-oxa-5,6-ditelluraspirooctane, Te(2)C(5)H(8)O, to bis(triphenylphosphine)(norbornene)platinum(0), [Pt(PPh(3))(2)(eta(2)-nb)], and to [1,8-bis(diphenylphosphino)naphthalene](norbornene)platinum(0), [Pt(dppn)(eta(2)-nb)], lead to the formation of dinuclear and mononuclear tellurolato platinum(ii) complexes, respectively, as a consequence of Te-Te bond cleavage; no Te-C bond cleavage was observed.     

Gold(I) and Gold(0) Complexes of Phosphinine-Based Macrocycles

A "CO-like matrix", showing coordination analogous to that of carbonyl groups, is provided by silacalix[4]phosphinine macrocycles. Reaction with Au(I) leads to the first gold(I) complexes of macrocycles, which can be reduced with sodium or potassium to the paramagnetic gold(0) complexes (an example is shown), as evidenced by cyclic voltammetry and EPR spectroscopy.     

Oxidative addition of allylic carbonates to palladium(0) complexes: reversibility and isomerization

The oxidative addition of a cyclic allylic carbonate to the palladium(0) complex generated from a [Pd(dba)2]+2 PPh3 mixture affords a cationic pi-allylpalladium(II) complex with the alkyl carbonate as the counter-anion. This reaction is reversible and proceeds with isomerization of the allylic carbonate at the allylic position. The equilibrium constant has been determined in DMF. The influence of the precursor of the palladium(0) is discussed.     

Crystal structure,electrochemical and photochemical studies of the trans-[Fe(cyclam)(NO)Cl]Cl2 complex (cyclam = 1,4,8,11-tetraazacyclotetradecane)

The trans-[Fe(cyclam)(NO)Cl]Cl₂ complex was synthesized by the reaction of cis-[Fe(cyclam)Cl₂]Cl with NO gas. The X-ray structure of the complex showed that the [Fe–NO] moiety is linear, consistent with the NO⁺ character of the nitric oxide ligand. This suggestion was reinforced by the IR data, which showed the νNO at 1888 cm⁻¹. The cyclic voltammogram of the trans-[Fe(cyclam)(NO)Cl]²⁺ complex presented three electrochemical processes at −0.70, 0.08 and 0.40 V versus Ag/AgCl. The first and last redox processes are centered at the NO ligand, whereas the second is characteristic of the generated aqua species, trans-[Fe(cyclam)Cl(H₂O)]²⁺. Upon irradiation at 330 nm, pH 3.4, the title complex releases the NO moiety with the concomitant generation of the trans-[Fe(cyclam)(H₂O)Cl]⁺ complex as suggested by electronic and IR spectroscopy as well as by cyclic voltammetry technique.     

A tandem radical cyclization route to tricyclo[4.3.n.0]alkanes

A facile route to tricyclo[4.3.n.0^1,5]alkane skeletons from conjugated cyclic enones was developed through tandem free radical cyclization reaction sequence involving the cyclopropylmethyl radical mediated rearrangement. The scope and limitation of the reaction was investigated.     

Benzannulation through Ruthenium(0)-Catalyzed Transfer Hydrogenative Cycloaddition: Precision Synthesis and Photophysical Characterization of Soluble Diindenoperylenes

The first application of ruthenium(0)-catalyzed 1,2-dione-diyne [2+2+2] cycloaddition to PAH construction is achieved by the precision synthesis of soluble diindenoperylenes (DIPs), the electronic structures of which were investigated using steady-state absorption and emission, transient absorption, cyclic voltammetry and time-dependent density functional theory     

Two‐Coordinate Fe0 and Co0 Complexes Supported by Cyclic (alkyl)(amino)carbenes

The CAAC [CAAC=cyclic (alkyl)(amino)carbene] family of carbene ligands have shown promise in stabilizing unusually low‐coordination number transition‐metal complexes in low formal oxidation states. Here we extend this narrative by demonstrating their utility in affording access to the first examples of two‐coordinate formal Fe⁰ and Co⁰ [(CAAC)₂M] complexes, prepared by reduction of their corresponding two‐coordinate cationic Fe^I and Co^I precursors. The stability of these species arises from the strong σ‐donating and π‐accepting properties of the supporting CAAC ligands, in addition to steric protection.     

Steric and electronic properties in bicyclic phosphines. Crystal and molecular structures of Se = Phoban-Q (Q = C2, C3Ph, Cy and Ph)

Reacting a series of the bicylic Phoban-Q (9-Q-9-phosphabicyclo[3.3.1]nonane and 9-Q-9-phosphabicyclo[4.2.1]nonane) derivatives (Q = alkyl, cyclo alkyl, aryl) with KSeCN results in the formation of the corresponding phosphine selenides. The first order phosphorus-selenium coupling constants, ¹J_P-Se, ranges from 682 to 689 Hz for the [3.3.1] isomers and from 703 to 717 Hz for the [4.2.1] isomers indicating the former to be significantly more electron rich. The crystal structures of Se = Phoban[3.3.1]-Q (Q = CH₂CH₃, C₃H₆Ph, Cy, and Ph) and Se = Phoban[4.2.1]-Q (Q = Cy and Ph) are reported and reveal PSe bond distances ranging from 2.1090(9) to 2.1245(7) Å. For Q = Cy and Ph the two isomers ([3.3.1] and [4.2.1]) co-crystallise in the same crystal enabling the determination of the molecular structures for both from the same data collection. The cone angles for all ligand derivatives were determined according to the Tolman model but by using the actual P-Se bond distances and were found to be virtually identical ranging from 165° to 175°. Changes in the Q substituent have a minor effect on the overall steric and electronic properties of the Phoban family of ligands and can be used to manipulate physical properties without changing the chemical properties significantly.     

Cationic NHC-Pd (NHC = N-heterocyclic carbene) complex-catalyzed cycloisomerization of dienes

A variety of [(NHC)Pd(η³-allyl)]Cl (NHC = N-heterocyclic carbene) involving different allyl groups and NHC ligands were synthesized and employed for the cycloisomerization of 1,6-dienes to form cyclic compounds selectively.     

Synthesis, characterization, and electrochemistry of tetracarbonyl(6-ferrocenyl-2,2′-bipyridine)tungsten(0)

6-Ferrocenyl-2,2′-bipyridine (fcbpy) was prepared by the reaction of lithiated ferrocene with bipyridine and employed as a bidentate ligand for the formation of tetracarbonyl(6-ferrocenyl-2,2′-bipyridine)tungsten(0). The labile complex pentacarbonyl[η²-bis(trimethylsilyl)ethyne]tungsten(0) reacts with fcbpy in CH₂Cl₂ to yield the disubstitution product, W(CO)₄(fcbpy), which was isolated as analytically pure substance and characterized by elemental analysis, IR, UV-Vis, MS, ¹H and ¹³C NMR spectroscopies. Electrochemistry of the fcbpy molecule and its complex W(CO)₄(fcbpy) was studied by cyclic voltammetry and controlled potential electrolysis combined with UV-Vis spectrometer. In the cyclic voltammogram of both the fcbyp molecule and its complex, an irreversible reduction and a reversible oxidation are assigned to the bipyridine and ferrocene moieties, respectively. The W(CO)₄(fcbpy) complex exhibits additionally two irreversible oxidations due to the tungsten centered electron transfer reactions.     

Simultaneous determination of prostaglandin E1, prostaglandin E0 and 15-keto-prostaglandin E0 in human plasma by gas chromatography/negative-ion chemical-ionization tandem mass spectrometry.

A sensitive and selective routine method for the simultaneous determination of prostaglandin E1 (PGE1), prostaglandin E0 (PGE0) and 15-keto-prostaglandin E0 (15-keto-PGE0) in human plasma is described using deuterated internal standards. The analytes were isolated from acidified human plasma by solid-phase extraction by means of Bond Elut C18 cartridges and derivatized to the pentafluorobenzyl (PFB) ester methoxime. The analytes were purified on Bond Elut Si cartridges and converted to the trimethylsilyl (TMS) ether. Quantitation was achieved by gas chromatography-negative-ion chemical-ionization tandem mass spectrometry. The precursor ion [M-PFB]- = [P]- carried more than 80% of the total ion current. Collision activated decomposition (CAD) of [P]- resulted in characteristic product ions of which the [P-2(CH3)3SiOH]- ion (PGE1) and the [P-(CH3)3SiOH]- ion (PGE0 and 15-keto-PGE0) were used for quantitation. The lower limit of quantitation (LLQ) was 2 pg/ml (PGE1 and PGE0) and 10 pg/ml (15-keto-PGE0) extracted from 2 ml of human plasma. Linear calibration curves were obtained over the concentration range 2-100 pg/ml (PGE1 and PGE0) and 10-500 pg/ml (15-keto-PGE0). In all cases, the precision and accuracy were < 17%. The present method has been applied successfully to pharmacokinetic and clinical studies in humans.     

Oxidative addition of palladium(0) complexes generated from

The major complex formed in solution from [[Pd0(dba)2]+1P-N] mixtures is [Pd0(dba)(P-N)] (dba=trans,trans-dibenzylideneacetone; P-N=PhPN, 1-dimethylamino-2-diphenylphosphinobenzene; FcPN, N,N-dimethyl-1-[2-(diphenylphosphino)ferrocenyl]methylamine; OxaPN, 4,4'-dimethyl-2-(2-diphenylphosphinophenyl)-1,3-oxazoline). Each complex consists of a mixture of isomers involved in equilibria: two 16-electron rotamer complexes [Pd0(eta2-dba)(eta2-P-N)] and one 14-electron complex [Pd0(eta2-dba)(eta1-P-N)] observed for FcPN and OxaPN. [Pd0(dba)(PhPN)] and [SPd0(PhPN)] (S solvent) react with PhI in an oxidative addition: [SPd0(PhPN)] is intrinsically more reactive than [Pd0(dba)(PhPN)]. This behavior is similar to that of the bidentate bis-phosphane ligands. When the PhPN ligand is present in excess, it behaves as a monodentate phosphane ligand, since [Pd0(eta2-dba)(eta1-PhPN)2] is formed first by preferential cleavage of the Pd-N bond instead of the Pd olefin bond. [Pd0(eta1-PhPN)3] is also eventually formed. [Pd0(dba)(FcPN)] and [Pd0(dba)(OxaPN)] are formed whatever the excess of ligand used. [SPd0(FcPN)] and [SPd0)(OxaPN)] are not involved in the oxidative addition. The 16-electron complexes [Pd0(eta2-dba)(eta2-FcPN)] and [Pd0(eta2-dba)(eta2-OxaPN)] are found to react with PhI via a 14-electron complex as has been established for [Pd0(eta2-dba)(eta1-OxaPN)]. Once again, the cleavage of the Pd-N bond is favored over that of Pd-olefin bond. This work demonstrates the higher affinity for [Pd0(P-N)] of dba compared with the P-N ligand, and emphasizes once more the important role of dba, which either controls the concentration of the most reactive complex, [SPd0(PhPN)], or is present in the reactive complexes, [Pd0(dba)(FcPN)] or [Pd0(dba)(OxaPN)], and thus contributes to their intrinsic reactivity.     

1,4,7,10-tetraazatetracyclo[5.5.1.04,13.010,13]tridecane: Degenerate rearrangement of its conjugate acid

The highly symmetrical 1,4,7,10-tetraazatetracyclo[5.5.1.0^4,13.0^10,13]tridecane (1) has been synthesized by two methods. The proton NMR spectrum of 1 is analyzed. The cyclic tetraaminomethane derivative undergoes a remarkable series of degenerate prototropic and conformational equilibria. The temperature dependence of the proton NMR spectra of 1 and its conjugate acid 3 are interpreted in terms of a large rate enhancement of intramolecular nucleophilic addition to guanidinium ion 3 (ring-chain tautomerism) compared to its acyclic counterpart.     

Synthesis and characterization of preferentially oriented (1 0 0) Pt nanowires

Two types of platinum deposits were obtained by potentiostatic deposition onto Ti substrates, namely platinum black (Pt B) and platinum nanowires (Pt NW) with the latter being achieved through a porous anodic aluminum oxide (AAO) membrane at the solution/substrate interface. Surface characterization of these deposits was performed using scanning electron microscopy (SEM) and cyclic voltammetry (CV) in sulphuric acid solution. Surface properties for Pt NW revealed a predominant presence of (1 0 0) crystallographic planes, not present in Pt B deposit grown in the same conditions. Also, Pt NW exhibits an increased resistance to electrochemically active surface area (EASA) loss upon potential cycling in acidic solution, as compared to Pt B.     

(Aminocarbene)(Divinyltetramethyldisiloxane)Iron(0) Compounds: A Class of Low‐Coordinate Iron(0) Reagents

The combined use of aminocarbene and divinyltetramethyldisiloxane (dvtms) as supporting ligands enables the access of unprecedented low‐coordinate iron(0) alkene compounds [L_nFe(η²:η²‐dvtms)] (L=N‐heterocyclic carbene (NHC) or cyclic (alkyl)(amino)carbene (CAAC), n=1 or 2) from the reactions of FeCl₂ with alkali‐metal reducing agents, free aminocarbene ligands, and dvtms. The iron(0) species deliver their {L_nFe⁰} fragments to perform redox reactions with Ph₂SiH₂, S₈, Se, and DippN₃, furnishing novel aminocarbene‐supported iron(IV) silylene, all‐ferrous iron–sulfur/selenium cubanes, and bis(imido)iron(IV) compounds. These conversions demonstrate the potential synthetic utility of the carbene‐supported iron(0) complexes as a valuable class of low‐coordinate iron(0) reagents.     

Synthesis,Characterization, and Theoretical Investigation of Two‐Coordinate Palladium(0) and Platinum(0) Complexes Utilizing π‐Accepting Carbenes

An elegant general synthesis route for the preparation of two coordinate palladium(0) and platinum(0) complexes was developed by reacting commercially available tetrakis(triphenylphosphine)palladium/platinum with π‐accepting cyclic alkyl(amino) carbenes (cAACs). The complexes are characterized by NMR spectroscopy, mass spectrometry, and single‐crystal X‐ray diffraction. The palladium complexes exhibit sharp color changes (crystallochromism) from dark maroon to bright green if the C‐Pd‐C bond angle is sharpened by approximately 6°, which is chemically feasible by elimination of one lattice THF solvent molecule. The analogous dark orange‐colored platinum complexes are more rigid and thus do not show this phenomenon. Additionally, [(cAAC)₂Pd/Pt] complexes can be quasi‐reversibly oxidized to their corresponding [(cAAC)₂Pd/Pt]⁺ cations, as evidenced by cyclic voltammetry measurements. The bonding and stability are studied by theoretical calculations.