Voltammetric Behavior of Osmium‐Labeled DNA at Mercury Meniscus‐Modified Solid Amalgam Electrodes. Detecting DNA Hybridization

The complex of osmium tetroxide with 2,2′‐bipyridine has been utilized as a probe of DNA structure and an electroactive marker of DNA in DNA hybridization sensors. It produces several voltammetric signals, the most negative of them has been observed only at mercury electrodes. This signal is of catalytic nature affording a high sensitivity of DNA determination. The catalytic current due to evolution of hydrogen in voltammetry of DNA modified by complex of osmium tetroxide with 2,2′‐bipyridine (DNA‐Os,bipy) was studied. Solid amalgam electrodes (modified with mercury menisci) of silver (m‐AgSAE), copper (m‐CuSAE), gold, and of combined bismuth and silver, were used as possible substitutes for mercury electrodes. Besides the hanging mercury drop electrode (HMDE), the catalytic current was observed only on m‐AgSAE and m‐CuSAE. Electrodes of gold and bismuth amalgams did not give the catalytic current. The detection limit of DNA‐Os,bipy on HMDE was 0.1 ng mL^?1 (RSD=2.3 %, N=11), and on m‐AgSAE 0.2 ng mL^?1 (RSD=3.1%, N=11). The m‐AgSAE was successfully applied as a detection electrode in double‐surface DNA hybridization experiments offering highly specific discrimination between complementary (target) and nonspecific DNAs, as well as determination of the length of a repetitive DNA sequence. The m‐AgSAE has proved a convenient alternative to the HMDE or carbon electrodes used for similar purposes in previous work.     

Investigation of protein FTT1103 electroactivity using carbon and mercury electrodes. Surface-inhibition approach for disulfide oxidoreductases using silver amalgam powder

Recently, it was shown that electrochemical methods can be used for analysis of poorly water-soluble proteins and for study of their structural changes and intermolecular (protein–ligand) interactions. In this study, we focused on complex electrochemical investigation of recombinant protein FTT1103, a disulfide oxidoreductase with structural similarity to well described DsbA proteins. This thioredoxin-like periplasmic lipoprotein plays an important role in virulence of bacteria Francisella tularensis. For electrochemical analyses, adsorptive transfer (ex situ) square-wave voltammetry with pyrolytic graphite electrode, and alternating-current voltammetry and constant-current chronopotentiometric stripping analysis with mercury electrodes, including silver solid amalgam electrode (AgSAE) were used. AgSAE was used in poorly water-soluble protein analysis for the first time. In addition to basic redox, electrocatalytic and adsorption/desorption characterization of FTT1103, electrochemical methods were also used for sensitive determination of the protein at nanomolar level and study of its interaction with surface of AgSA microparticles. Proposed electrochemical protocol and AgSA surface-inhibition approach presented here could be used in future for biochemical studies focused on proteins associated with membranes as well as on those with disulfide oxidoreductase activity.     

Electrodes of Nontoxic Solid Amalgams for Electrochemical Measurements

The preparation, activation and electrochemical pretreatment of electrodes based on nontoxic solid amalgams were described. Testing of metal solid amalgam electrodes (MeSAEs) proved their broad applicability in many respects, e.g., as to the range of working potentials and the level of background currents, well comparable with those of the hanging mercury drop electrode (HMDE). A regeneration of their surfaces before each measurements could be simply automatized using a PC‐controlled system providing a reasonable repeatability of voltammetric measurements down to 3% RSD. Combination with stripping techniques at accumulation times t_ac=300 s the detection limit amounted to the concentration level of 1 ppb Cu(II), Pb(II), Cd(II), Zn(II), etc. Best electrochemical properties were exhibited by the silver solid amalgam electrode (AgSAE). For example, polished AgSAE (p‐AgSAE), completely free of liquid mercury, proved satisfactory even at more negative potentials enabling the determination of Zn(II), Mn(II), IO , etc. Moreover, even better repeatability of mercury meniscus modified AgSAE (m‐AgSAE) was due to better quality and renewability of its surface. In many cases further testing confirmed that under appropriate conditions MeSAEs represent good, often cheaper and more users‐friendly alternatives to HMDE.     

Brdicka-type processes of cysteine and cysteine-containing peptides on silver amalgam electrodes

Silver solid amalgam electrode (AgSAE) was used for differential pulse voltammetric (DPV) measurements of cysteine and cysteine-containing peptides, glutathione, gamma-Glu-Cys-Gly and phytochelatin (gamma-Glu-Cys)(3)-Gly (PC3), in the presence of Co(II) ions. It had been established earlier that cysteine-containing peptides and proteins catalyze hydrogen evolution at mercury electrodes in presence of cobalt salts; these processes are known as the Brdicka reaction. DPV signals measured with the AgSAE, the surfaces of which had been modified by mercury meniscus or mercury film, were qualitatively the same as those obtained with the hanging mercury drop electrode (HMDE). With these electrodes the number and the intensity of Brdicka signals of cysteine, glutathione and PC3 differed, making a distinction among them possible. On the other hand, with the polished silver solid amalgam electrode (the surface of which was completely free of liquid mercury) all three compounds produced only one but strikingly intense peak in the region of Brdicka reaction. Using this signal, cysteine, glutathione as well as PC3 could be determined at 10(-8)M level, representing sensitivity up to 2 orders of magnitude better than attained with the mercury-modified AgSAEs or HMDE.     

Voltammetric Determination of 4‐Nitrophenol and 5‐Nitrobenzimidazole Using Different Types of Silver Solid Amalgam Electrodes – A Comparative Study

The voltammetric behavior of two genotoxic nitro compounds (4‐nitrophenol and 5‐nitrobenzimidazole) has been investigated using direct current voltammetry (DCV) and differential pulse voltammetry (DPV) at a polished silver solid amalgam electrode (p‐AgSAE), a mercury meniscus modified silver solid amalgam electrode (m‐AgSAE), and a mercury film modified silver solid amalgam electrode (MF‐AgSAE). The optimum conditions have been evaluated for their determination in Britton‐Robinson buffer solutions. The limit of quantification (L_Q) for 5‐nitrobenzimidazole at p‐AgSAE was 0.77 µmol L^?1 (DCV) and 0.47 µmol L^?1 (DPV), at m‐AgSAE it was 0.32 µmol L^?1 (DCV) and 0.16 µmol L^?1 (DPV), and at MF‐AgSAE it was 0.97 µmol L^?1 (DCV) and 0.70 µmol L^?1 (DPV). For 4‐nitrophenol at p‐AgSAE, L_Q was 0.37 µmol L^?1 (DCV) and 0.32 µmol L^?1 (DPV), at m‐AgSAE it was 0.14 µmol L^?1 (DCV) and 0.1 µmol L^?1 (DPV), and at MF‐AgSAE, it was 0.87 µmol L^?1 (DCV) and 0.37 µmol L^?1 (DPV). Thorough comparative studies have shown that m‐AgSAE is the best sensor for voltammetric determination of the two model genotoxic compounds because it gives the lowest L_Q, is easier to prepare, and its surface can be easily renewed both chemically (by new amalgamation) and/or electrochemically (by imposition of cleaning pulses). The practical applicability of the newly developed methods was verified on model samples of drinking water.     

Rapidly renewable silver amalgam annular band electrode for voltammetry and polarography

This work describes a novel type of working electrode for use in voltammetry and polarography — the renewable silver liquid amalgam film–modified silver solid amalgam annular band electrode (AgLAF–AgSAE). The electrode is produced by mechanically refreshing the silver liquid amalgam film (AgLAF) before each measurement. The main constituents of the electrode are: a specially constructed silver solid amalgam annular band electrode (AgSAE), two silicon O-rings, silver liquid amalgam and a polypropylene electrode body. Contaminants from the analyzed solution are removed and the AgSAE surface is covered with a thick layer of fresh amalgam while pulling the AgSAE into the sensor body. During movement in the reverse direction AgLAF is formed and homogenized. The time needed to refresh the film is less than 1 s. The electrode is characterized by excellent surface repeatability (～ 1%) and long-term stability (over ten thousand measurement cycles).     

Mercury meniscus on solid silver amalgam electrode as a sensitive electrochemical sensor for tetrachlorvinphos

The in-house prepared mercury meniscus modified solid silver amalgam electrode (m-AgSAE) was successfully applied for the detection of organophosphate pesticide tetrachlorvinphos in pH 7 buffer solution. The electrochemical performance of m-AgSAE for the reduction of tetrachlorvinphos was evaluated using cyclic voltammetry (CV), differential pulse voltammetry (DPV), and square wave voltammetry (SWV), respectively. The surface morphology of solid silver electrode (AgE), as-amalgamated solid silver amalgam electrode (AgSAE), and polished solid silver amalgam electrode (p-AgSAE) was examined by field emission scanning electron microscopy (FESEM). Among the applied techniques, DPV and SWV analysis showed a remarkable increase in the reduction peak current and provided a simple, fast, and sensitive method for the determination of tetrachlorvinphos. The electrochemical impedance spectroscopy (EIS) was used to correlate the electrocatalytic activity of AgSAE, p-AgSAE and m-AgSAE with their interfacial charge transport capabilities. Under the optimized experimental conditions, the DPV and SWV responses were linear over the 1–9 μM and 10–50 μM concentration ranges with a detection limit of 0.06 μM for DPV and 0.04 for SWV. The estimation of tetrachlorvinphos in the ground and waste water samples with the proposed method was in good agreement with that of the added amount. The proposed electrochemical method not only extends the application of non-toxic m-AgSAE, but also offers new possibilities for fast and sensitive analysis of tetrachlorvinphos and its structural analogs in environmental samples.     

Voltammetric Determination of Azidothymidine Using Silver Solid Amalgam Electrodes

A new simple and direct electroanalytical method was developed for the determination of azidothymidine in commercial pharmaceutical preparations. It is based on differential pulse voltammetry at silver solid amalgam electrode with polished surface (p‐AgSAE) or surface modified by mercury meniscus (m‐AgSAE). The electroreduction of azidothymidine in basic media at these electrodes gives rise to one irreversible cathodic peak. Its potential in 0.05 mol L^?1 borate buffer, pH 9.3 at ca. ?1050 mV is comparable to that using hanging mercury drop electrode (HMDE). Achieved limits of quantitation are in the 10^?7 mol L^?1 concentration range for both amalgam electrodes. According to the procedure based on the standard addition technique, the recoveries of known amounts of azidothymidine contained in pharmaceutical preparations available in capsules were 101.4±1.8% (m‐AgSAE), 100.3±3.5% (p‐AgSAE) and 102.0±1.0% (HMDE) (n=10). There was no significant difference between the values gained by proposed voltammetric methods and the HPLC‐UV recommended by the United States Pharmacopoeia regarding the mean values and standard deviations.     

Cathodic stripping voltammetry of cysteine using silver and copper solid amalgam electrodes

Silver and copper solid amalgam electrodes (modified with mercury meniscus and based on amalgamation of fine metallic powder) have been successfully tested for cathodic stripping voltammetry of cysteine. In the case of the silver solid amalgam electrode AgSAE the relative standard deviation (RSD) and the detection limit (3 SD) reached +/-2.3% and 3x10(-9) mol l(-1) cysteine, respectively.     

Metal Exchange Reactions in Metallothioneins Explored by Electrochemical Methods

Metallothioneins (MTs) are widely occurring, small, cysteine‐rich proteins, important for essential metal (Zn, Cu) homeostasis and transport and for heavy metal (Cd, Hg) detoxification. In buffered solutions of mammalian MT, voltammetry and potentiometric striping analysis (PSA) can distinguish different coordination of bound metals or follow their exchange, especially that of zinc and cadmium for copper, silver, and cobalt. The examples of different electrode applications as of hanging mercury drop electrode (HMDE), of silver solid amalgam (AgSAE) electrode, and of silica gel modified carbon paste electrode (SiO₂‐CPE) are given.     

A New Approach for Voltammetric Determination of Nefopam and its Metabolite

In present paper we described a new simple voltammetric method of determination of nefopam alkaloid and its metabolite – N‐oxide. N‐oxide of nefopam is reduced at the dropping mercury electrode (DME) and silver solid amalgam electrodes (AgSAE), which can effectively replace mercury and chemically modified electrodes. The reduction consists of two one‐electron stages each accompanied with one proton transfer. N‐oxide of nefopam can be obtained from nefopam substance by oxidation with potassium peroxymonosulfate. It was studied the effect of various factors on N‐oxide quantitative yield (pH, oxidation duration, reagents concentration) as well as on the reduction of N‐oxide at DME and p‐AgSAE (pH, the nature of background electrolyte, potential and time of accumulation). It was showed that the reduction current linearly increased with increasing of concentration of analgesic. Limit of quantiation is 10^?6 mol L^?1 at DME and 10^?7 mol L^?1 at p‐AgSAE. The developed method was applied for the analysis of commercial drug solution for injection “Nefopam” with recovery of 96.7 %, as well as for the spiked human urine samples. Excellent repeatability with a relative standard deviation below 5 % was achieved.     

Voltammetric Determination of Trace Amounts of 2‐Methyl‐4,6‐Dinitrophenol at a Silver Solid Amalgam Electrode

The voltammetric behavior of 2‐methyl‐4,6‐dinitrophenol was investigated by differential pulse voltammetry (DPV) at a nontoxic mercury meniscus‐modified silver solid amalgam electrode (m‐AgSAE). Conditions have been found for its determination by DPV at m‐AgSAE in the concentration range of 0.2 to 1 μmol L^?1.     

Voltammetric Determination of N,N‐Dimethyl‐4‐amine‐carboxyazobenzene at a Silver Solid Amalgam Electrode

The voltammetric behavior of N,N‐dimethyl‐4‐amino‐2′‐carboxyazobenzene was investigated by differential pulse voltammetry (DPV) at a mercury meniscus‐modified silver solid amalgam electrode (m‐AgSAE). Conditions have been found for its determination by DPV at m‐AgSAE in the concentration range of 0.4 to 15 μmol L^?1.     

The effect of composition of solid silver amalgam electrodes on their electrochemical response

The main purpose of this work was to evaluate the effect of the silver to mercury ratio on the voltammetric responses of silver solid amalgam electrodes (AgSAE’s). For this, the AgSAE were prepared by mechanical mixing the metals in the following mass ratios of silver to mercury: 30/70, 40/60, 50/50, 60/40, and 70/30. The resulting AgSAE’s were physically characterized by energy dispersive X-ray analysis, X-ray diffraction and scanning electron microscopy, confirming the mass percentages of the silver and mercury, the total absence of liquid mercury and a globular structure of all AgSAE’s. Furthermore, it was observed that the AgSAE 30/70 contained only one single phase (Ag₂Hg₃), and no metallic silver or mercury oxides. Additionally, the resulting AgSAE’s were chemically characterized with respect to the influence of the electrode composition on the reproducibility and electrochemical signals of a hexamine-ruthenium (III) chloride solution by use of electrochemical impedance spectroscopy and cyclic voltammetry. The separation between anodic and cathodic peaks, and consequently, the charge transfer resistance across the electrode/solution interface, and the electroactive area were calculated demonstrating that the 30/70 composition is the best surface for practical applications. Finally, square-wave voltammetry experiments were performed in 4-nitrophenol solution, with a previous optimization of the experimental and voltammetric parameters. The calculated detection limit shows that the AgSAE 30/70 is suitable for determining any contamination by p-nitrophenol, minimizing the toxic residues in case of using liquid mercury electrodes.     

Voltammetry of osmium-modified DNA at a mercury film electrode: application in detecting DNA hybridization

Mercury film electrodes (MFE) have recently been used in nucleic acid electrochemical analysis as alternatives to the classical mercury drop ones. DNA modified with osmium tetroxide, 2,2'-bipyridine (Os,bipy) can be detected with a high sensitivity at mercury electrodes via measurements of a catalytic osmium signal. In this paper we show that mercury film on a glassy carbon electrode can be used in voltammetric analysis of Os,bipy-modified DNA. Application of the MFE as a detection electrode in double-surface electrochemical DNA hybridization assay involving osmium labeling of target DNA is demonstrated.     

Characterization of single-stranded DNA on chitosan-modified electrode and its application to the sequence-specific DNA detection

Single-strand DNA could bind with chitosan on a platinum electrode via forming a tight DNA-chitosan complex. The salt concentration of the ssDNA solution had an obvious effect on the surface coverage, the immobilization was remarkably reduced at high salt concentration. The sample ssDNA immobilized on the chitosan-modified electrode can hybridize efficiently with the complementary sequences and be successfully used for the sequence-specific DNA detection. The same results could be obtained using a gold or graphite electrode modified with chitosan. The stability of this electrode has been also discussed.     

Characterization of single-stranded DNA on chitosan-modified electrode and its application to the sequence-specific DNA detection

Single-strand DNA could bind with chitosan on a platinum electrode via forming a tight DNA-chitosan complex. The salt concentration of the ssDNA solution had an obvious effect on the surface coverage, the immobilization was remarkably reduced at high salt concentration. The sample ssDNA immobilized on the chitosan-modified electrode can hybridize efficiently with the complementary sequences and be successfully used for the sequence-specific DNA detection. The same results could be obtained using a gold or graphite electrode modified with chitosan. The stability of this electrode has been also discussed.     

DNA纳米网络修饰碳纤维盘电极及其分子传感应用

DNA immobilization on electrode surfaces has been widely used for fabricating sensors since DNA can interact with a wide variety of biomolecules. Recendy, DNA has been demonstrated as an electronic super conductor and become the most promising biomolecule for application of chemical sensing in biological system. Calf thymus DNA (ct-DNA) is a most popularly used native DNA in many applications. An electrochemical deposition on carbon fiber micro electrode can provide sensitive detection of dopamine in presence of large amount of ascorbic acid.     

Polyaniline based nucleic acid sensor

Twenty-bases long NH2-modified DNA and PNA probes specific to a pathogen (Mycobacterium tuberculosis) were covalently immobilized onto a polyaniline (PANI)/Au electrode to detect nucleic acid hybridization with complementary, one-base mismatch and noncomplementary targets within 30 s using Methylene Blue. The PNA-PANI/Au electrode exhibits improved specificity (1000 times) and detection limit (0.125 x 10(-18) M) as compared to that of the DNA-PANI/Au electrode (2.5 x 10(-18) M). These PNA-PANI/Au electrodes can be utilized for detection of hybridization with the complementary sequence in 5 min sonicated M. tuberculosis genomic DNA within 1 min of hybridization time. These DNA-PANI/Au and PNA-PANI/Au electrodes can be used 6-7 and 13-15 times, respectively.     

Determination of pipecuronium bromide and its impurities in pharmaceutical preparation by high-performance liquid chromatography with coulometric electrode array detection

A sensitive and selective HPLC method with coulometric electrode array detection for the determination of pipecuronium bromide and its four impurities has been developed. The coulometric electrode array detection at increasing potentials from +300 to +900mV of the porous graphite electrode versus the palladium reference electrode was used. The limit of detection and quantitation for pipecuronium bromide was 8 and 25ngml(-1), respectively. This elaborate method for the simultaneous analysis of pipecuronium bromide and its impurities proved to be fast, precise, accurate, sensitive, and could be applied to analysis in substances and in pharmaceutical preparations.