Ionic liquids: Liquid structure

The objective of this paper is the elaboration of liquid structure model for ionic liquids (IL) with cation:anion ratio 1:1. Described model consists of ionic and alkyl domains. The ionic domain is neutral. It has octupole structure: 4 cations and 4 anions are distributed in cube vertexes. The alkyl domains are formed by alkyl chains of cations. Elaborated model explains properties of IL: low melting points, hygroscopicity (including hydrophobic IL), and viscosity.     

Theoretical investigation of imidazolium based ionic liquid/alcohol mixture: a molecular dynamic simulation

In this work, molecular dynamic simulation of the mixture of imidazolium based ionic liquids with alcohols is implemented in order to investigate mixing excess properties and some structural and physical properties of the mixture. Excess volumes and enthalpies are evaluated for 11 different mole fractions of ionic liquids at each 0.1, in the range of 0 to 1. Radial distribution function, cohesive energy density, potential of mean force, solvation energy, and diffusion coefficient are reported and analysed. The effects of the cationic alkyl chain length, in comparison with changes of the anions, on these properties are reported. Results reveal that the methanol molecule participates with its hydrophilic characteristics in the mixing process and tends to aggregate around anion part of the ionic liquids, especially in the case of Cl.     

The physical properties of aqueous solution of room-temperature ionic liquids based on imidazolium: Database and evaluation

We report the systematic studies of the physical properties of systems involving imidazolium based ionic liquids and water. The measurements of density ρ, refractive index Δ_n, viscosity η, specific conductance κ and surface tension γ were made over the whole concentration range. The equivalent conductivity Λ_m was calculated. The physical properti`es of the solutions changed with the change of association between ionic liquid and water. The physical properties of the solutions also vary with the alkyl length on the cation and polarity of anion.     

Probing the interaction of ionic liquids with graphene using surface‐enhanced Raman spectroscopy

We report an in situ measurement of the interaction of an imidazolium‐based room temperature ionic liquid with both pure silver and a graphene‐over‐silver electrode under an applied electrochemical potential. At a negative applied potential, overall signal intensity increased indicating enhanced ionic liquid concentration at both silver and graphene electrodes. Vibrational modes associated with the imidazolium ring exhibited greater intensity enhancements and larger peak shifts compared with the anion indicating that the cation adsorbs with the ring and alkyl chain parallel to the electrode surface for both silver and graphene. In contrast to the silver, the surface enhanced Raman spectra of the ionic liquid near graphene showed shifts in the cation peaks even at no applied potential because of the strong π–π interaction between the ionic liquid and the graphene. Furthermore, the intensity of the graphene peak decreased in the presence of ionic liquid possibly due to the interaction between the ionic liquid and graphene. These results illustrate the effectiveness of surface‐enhanced Raman spectroscopy to investigate electrolyte interactions with graphene at the liquid/electrode interface. Copyright © 2015 John Wiley & Sons, Ltd.     

Microscopic density functional theory of wetting and drying of a solid substrate by an explicit solvent model of ionic solutions

Classical density functional theory (DFT) of inhomogeneous fluids is applied to an explicit solvent ‘semi-primitive’ model (SPM) of ionic solutions to investigate the influence of ionic solutes on the wetting behaviour of a solvent in contact with a neutral or charged planar substrate. The SPM is made up of three species of hard sphere particles with different diameters, interacting via an attractive Yukawa potential to model excluded volume and cohesion. The solvent particles are neutral, while the monovalent anions and cations are oppositely charged. The polar nature of the solvent is modelled by a continuum dielectric permittivity linked to the local solvent density. All three species interact with the impenetrable substrate via an attractive external potential. While excluded volume effects are accurately described by a Rosenfeld ‘fundamental measure’ free energy functional, the short range Yukawa attraction and Coulombic interactions are treated within the mean-field approximation. The ionic solutes are found to have a significant impact on the wetting behaviour of the solvent, in particular on the wetting temperature. Strong electric fields, or long-ranged (weakly screened) Coulombic forces are shown to have the propensity to change the wetting transition from second to first order. The cation–anion size asymmetry leads to charge separation on the liquid–vapour interface of the solution, which in turn can induce a drying transition on the liquid side of liquid–vapour coexistence.     

Modified equation of state extended to imidazolium-, phosphonium-, pyridinium-, pyrrolidinium- and ammonium-based ionic liquids

An analytical equation of state (EoS) has been previously employed by Hosseini and Sharafi (Ionics 17:511, 2011) for modelling of PVT data of some ionic liquids (ILs). In this work, we have extended the mentioned model to five classes of ILs by the use of alternative scaling constants for corresponding states correlation procedure. For this purpose, ILs involving imidazolium, phosphonium, pyridinium, pyrrolidinium and ammonium cations have been taken into account. From these, 1,294 experimental data points examined to show the reliability of the modified EoS. The comparison of predicted densities with the measured values over a broad range of temperature 293?C452 K and pressures up to 150 MPa led to the encouraging results. The average absolute deviation of calculated densities from literature values was found to be 0.73%. Moreover, to establish the predictive power of proposed model, the reproduced densities have been compared with those obtained by another literature work. Moreover, we have demonstrated the density behaviour of studied ILs in terms of alkyl chain length of imidazolium cation via proposed model.     

Off-centre charge model of the planar electric double layer for asymmetric 2:1/1:2 valencies

ABSTRACT

Grand canonical Monte Carlo simulation results are reported for the structure and capacitance of a planar electric double layer containing off-centre charged rigid sphere cations and centrally charged rigid sphere anions. The ion species are assigned asymmetric valencies, +2:?1 and +1:?2, respectively, and set in a continuum dielectric medium (solvent) characterised by a single relative permittivity. An off-centre charged ion is obtained by displacing the ionic charge from the centre of the sphere towards its surface, and the physical double layer model is completed by placing the ionic system next to a uniformly charged, non-penetrable, non-polarizable planar electrode. Structural results such as electrode-ion singlet distribution functions, ionic charge density and orientation profiles are complemented by differential capacitance results at electrolyte concentrations of 0.2?mol/dm³ and 1?mol/dm³, respectively, and for various displacements of the cationic charge centre. The effect of asymmetry due to off-centre cations and valency asymmetry on the double layer properties is maximum for divalent counterions and when the cation charge is closest to the hard sphere surface.     

Efficient adsorption and photocatalytic degradation of Congo red onto hydrothermally synthesized NiS nanoparticles

The influence of the length of the cation alkyl chain on the dispersibility by ultrasonic treatment of TiO₂ nanopowders in hydrophilic imidazolium-based room temperature ionic liquids was studied for the first time by dynamic light scattering and advanced rheology. TiO₂ nanopowders had been synthesized by chemical vapor synthesis (CVS) under varied conditions leading to two different materials. A commercial nanopowder had been used for comparison. Characterizations had been done using transmission electron microscopy, X-ray diffraction, nitrogen adsorption with BET analysis, and FT-IR spectroscopy. Primary particle sizes were about 6 and 8 nm for the CVS-based and 26 nm for the commercial materials. The particle size distribution in the dispersion was strongly influenced by the length of the cation alkyl chain for all the investigated powders with different structural characteristics and concentrations in the dispersion. It was found that an increase of the alkyl chain length was beneficial, leading to a narrowing of the particle size distribution and a decrease of the agglomerate size in dispersion. The smallest average nanoparticle sizes in dispersion were around 30 nm. Additionally, the surface functionality of the nanoparticles, the concentration of the solid material in the liquid, and the period of ultrasonic treatment control the dispersion quality, especially in the case of the ionic liquids with the shorter alkyl chain. The influence of the nanopowders characteristics on their dispersibility decreases considerably with increasing cation alkyl chain length. The results indicate that ionic liquids with adapted structure are candidates as absorber media for nanoparticles synthesized in gas phase processes to obtain liquid dispersions directly without redispergation.     

Raman spectra of a pseudo‐oxocarbon anion in ionic liquids

Raman and electronic spectra of the [3,5‐bis(dicyanomethylene)cyclopentane‐1,2,4‐trionate] dianion, the croconate violet (CV), are reported in solutions of ionic liquids based on imidazolium cations. Different normal modes of the CV anion, ν (CO), ν (CO) + ν (CC) + ν (CCN), and ν(C≡N), were used as probes of solvation characteristics of ionic liquids, and were compared with spectra of CV in common solvents. The spectra of CV in ionic liquids are similar to those in dichloromethane solution, but distinct from those in protic solvents such as ethanol or water. The UV–vis spectra of CV in ionic liquids strongly suggest π–π interactions between the CV anion and the imidazolium cation. Copyright © 2009 John Wiley & Sons, Ltd.     

Electrochemical performance of lead acid battery using ammonium hydrogen sulphate with different alkyl groups

In this work, the application of ionic liquids (ILs)??mono-, bicycyclohexyl, monohexyl and tetrahexyl ammonium hydrogen sulphate??as electrolyte additives on the electrochemical performance of lead acid batteries is proposed. The electrochemical behaviour of Pb?C1.66% Sb?C0.24% Sn alloy in sulphuric acid solution is investigated in the presence of the mentioned ILs with different numbers of alkyl or cycloalkyl chains. Particularly, the hydrogen and oxygen evolution potential and anodic layer characteristics were studied using cyclic and linear sweep voltammetric methods. The obtained results indicate that hydrogen evolution overpotential of Pb/Sb/Sn alloy in the presence of ILs increases. This overpotential mainly depends on the concentration of ILs and the number of alkyl and cycloalkyl chains on the cations. Also, the difference between the oxygen oxidation potential in anodic and cathodic scans (?E) decreases using different ILs.     

Ionic liquids screening for desulfurization of natural gasoline by liquid–liquid extraction

Seventy five ionic liquids (ILs) were tested as a sequestering agent of sulfured compounds in natural gasoline (NG). Desulphurization of NG was performed by means of liquid–liquid extraction method at room temperature and atmospheric pressure. Experimental ILs containing imidazolium, pyridinium, and ammonium cations along with organic and inorganic anions were synthesized conventionally and under microwave and sonochemical conditions. The effect of the molecular structure of ILs on the desulfurization efficiency of NG with high sulfur content was evaluated. Analysis indicated that the anion type played a more important role than the cation on the desulphurization process. ILs based on halogen–ferrates and halogen–aluminates exhibited the highest efficiency in sulfur removal, and their efficiency is further improved when there is an excess of metallic salt in a ratio of at least 1:1.3 during the synthesis of the corresponding IL. An explanation for the ability of metallic ILs to remove sulfur-containing compounds from natural gasoline based on the ratio of the ionic charge to the atomic radius is proposed. Furthermore, a method to recover and reuse water-sensitive to halogenated precursors is described.     

Carbon–ionic liquid double-layer capacitors

A series of electrochemical capacitors, based on activated carbon powders (ACP, specific surface area 870 and 2600 m²/g) and ionic liquids as electrolytes, were prepared and tested. The ionic liquids consisted of 1-ethyl-3-methyl imidazolium (EMIm⁺), 1-butyl-3-methyl imidazolium (BMIm⁺) and 1-methyl-1-propyl pyrrolidinium (BMPy⁺) cations, as well as of tetrafluoroborate, hexafluorophosphate and bis((trifluoromethyl)sulfonyl) imide anions. A typical capacitor consisted of two electrodes each with a mass of ca. 15–30 mg, and showed a capacity of ca. 0.35–1.5 F; this leads to a specific capacity of the carbon electrode material within the range of 45 (ACP 870 m²/g)–180 F/g (ACP 2600 m²/g). The specific capacity expressed versus total surface of carbon material was within the range of 5.2–6.9 μF/cm². The electrochemical stability window of ionic liquids determined at the glassy carbon electrode is within the range of ca. 3.0–4.2 V. The energy stored in a capacitor based on activated carbons and ionic liquids may be high, due to a broad practical electrochemical stability window of ca. 3 V. Ionic liquids are characterised by negligible vapour pressure; such a capacitor emits no volatile organic compounds and may be regarded as environmentally friendly.     

Revisited vibrational assignments of imidazolium‐based ionic liquids

Imidazolium‐based ionic liquids (ILs) involving anions of variable coordinating strength have been investigated using infrared (IR) and Raman spectroscopies, density functional theory (DFT) calculations and selective deuteration of the imidazolium CH groups. Particular emphasis has been placed on the vibrational assignments of the anion and cation internal vibrations, a prerequisite before any interpretation of spectral changes due to ion–ion interactions in these unconventional liquids. The vibrations of highly symmetric and weakly coordinating anions, such as PF₆⁻, have unperturbed wavenumbers, but unexpected IR or Raman activity for some modes, showing that the anion is subjected to an anisotropic electric field. The stretching as well as the in‐plane and out‐of‐plane bending modes of the imidazolium CH groups are anharmonic. They give broad bands that reflect a large distribution of interactions with the surrounding anions. All the bending modes are mixed with ring vibrations and the stretching modes are complicated by Fermi resonance interactions with overtones and combination of in‐plane ring modes. However, the stretching vibration of the quasi‐diatomic C₍₂₎ D bond appears to be a good spectroscopic probe of the increasing cation–anion interactions when the coordinating strength of the anion increases. The broad absorption observed in the far IR with weakly coordinating anions remains practically unchanged when the acidic C₍₂₎ H imidazolium bond is methylated and even when the imidazolium cation is substituted by tetra‐alkyl ammonium or pyrrolidinium cations. It is concluded that this absorption is a general feature of any IL, coming from the relative translational and librational motions of the ions without needing to invoke C₍₂₎ H anion hydrogen bonds. Copyright © 2010 John Wiley & Sons, Ltd.     

Probing the adsorption of methylimidazole at ionic liquids/Cu electrode interface by surface‐enhanced Raman scattering spectroscopy

Two kinds of room‐temperature ionic liquids, 1‐butyl‐3‐methylimidazolium bromide ([BMIM]Br) and 1‐butyl‐3‐methylimidazolium tetrafluoroboride ([BMIM]BF₄), were used as solvent, and the adsorption of the ionic liquids themselves and of N‐methylimidazole (NMIM) were investigated by electrochemical surface‐enhanced Raman scattering (SERS) over a wide potential window. The results revealed that the cation of ionic liquid adsorbed onto Cu surface with different configurations in different potential ranges. When the potential was changed from the negative to the positive range, the orientation underwent a change from flat to vertical, and the onset potential for the orientation change was dependent on the types of anion of the ionic liquid. The ionic liquid in bulk solution exhibited a remarkable effect on the adsorption of NMIM. The electrode surface structure changed from adsorbing the ionic liquid at the negative potential to coadsorbing the ionic liquid and NMIM at relative positive potential for the [BMIM]BF₄ liquids, and formed films of NMIM at extremely positive potential. Due to the strong specific adsorption of Br⁻, the coadsorption of ionic liquid and NMIM was not observed in the system [BMIM]Br. By simulating the electrode surroundings, two surface complexes [Cu(NMIM)₄Br]Br·H₂O and [Cu(NMIM)₄](BF₄)₂ were synthesized by the electrochemical method in the corresponding ionic liquids for modeling the surface coordination chemistry of NMIM. The surface coordination configuration of NMIM and ionic liquids is proposed. Copyright © 2009 John Wiley & Sons, Ltd.     

Experimental determination of space charge density associated with flow electrification phenomenon: Application to power transformers

At the solid/liquid interface, a charge zone called the Electrical Double Layer (EDL) appears. It is constituted of two zones of opposite sign, one in the solid and another one in the liquid. When a liquid flows through a pipe, an axial streaming current is generated. This current is due to the convection of the charges coming from the electrical layer in the liquid. The experimental methods for the determination of space charge density have been clearly identified in the case of fully-developed EDL. On the contrary, there is a need for further exploration in the case of a non-fully developed EDL. The purpose of this paper is to calculate the fully developed space charge density at the wall by streaming electrification experiments which are conducted in the case of non-fully developed EDL. Moreover, it introduces a simplified procedure for the experimental determination of space charge density as a function of liquid flow velocity. This procedure can be conducted for the investigation of flow electrification phenomena in transformers with oil/metal configuration.     

Efficient and green synthesis of tetrasubstituted pyrroles promoted by task-specific basic ionic liquids as catalyst in aqueous media

Synthesis of tetrasubstituted pyrroles by the three-component condensation reaction of acid chlorides, dialkyl acetylenedicarboxylates, and amino acids in the presence of various room-temperature ionic liquids (RTILs) as catalysts in water is reported. Among the ionic liquids used, the basic functionalized ionic liquid, butyl methyl imidazolium hydroxide [bmim]OH, was the most effective catalyst. The influence of reaction temperature, reaction time, and amount of ionic liquid on the reaction was investigated. The [bmim]OH/H₂O catalyst system could be reused for at least five recycles without appreciable loss of efficiency.     

Ionic liquid confined in silica nanopores: molecular dynamics in the isobaric–isothermal ensemble

Molecular dynamics simulations in the isobaric–isothermal ensemble are used to investigate the structure and dynamics of an ionic liquid confined at ambient temperature and pressure in hydroxylated amorphous silica nanopores. The use of the isobaric–isothermal ensemble allows estimating the effect of confinement and surface chemistry on the density of the confined ionic liquid. The structure of the confined ionic liquid is investigated using density profiles and structural order parameters while its dynamics is assessed by determining the mobility and ionic conductivity of the confined phase. Despite the important screening of the electrostatic interactions (owing to the small Debye length in ionic liquids), the local structure of the confined ionic liquid is found to be mostly driven by electrostatic interactions. We show that both the structure and dynamics of the confined ionic liquid can be described as the sum of a surface contribution arising from the ions in contact with the surface and a bulk-like contribution arising from the ions located in the pore centre; as a result, most properties of the confined ionic liquid are a simple function of the surface-to-volume ratio of the host porous material. In contrast, the ionic conductivity of the confined ionic liquid, which is a collective dynamical property, is found to be similar to the bulk. This study sheds light on the complex behaviour of hybrid materials made up of ionic liquid confined in inorganic porous materials.     

Study of tribochemical decomposition of ionic liquids on a nascent steel surface

Tribological properties and the decomposition process of ionic liquids (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide and 1-dodecyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide) on a nascent surface of bearing steel 52100 were investigated by a ball-on-disk friction tester in a vacuum chamber equipped with a quadrupole mass spectrometer (Q-MS). Ionic liquids exhibited better tribological properties than synthetic hydrocarbon oil (multialkylated cyclopentane (MAC)) in high vacuum conditions. The induction period for decomposition of MAC was about 10 km, while no obvious gaseous products were observed for ionic liquids even after a sliding distance of 22 km under the same mechanical conditions. The mass spectra indicated that both the anionic and cationic moieties of ionic liquids decomposed on the nascent steel surface during friction processes. The cationic moiety with a longer alkyl chain was more difficult to decompose on the nascent steel surface than that with a shorter alkyl chain. XPS analysis revealed that the tribofilm formed by ionic liquid was mainly composed of FeF₂ and FeS, which deactivated the nascent surface. As a result, desorption rate of gaseous products decreased appreciably comparing with MAC. The critical load for the mechanical activation of the decomposition correspondingly increased from 1.1 N of MAC to 8 N of ionic liquids.     

基于变压红外光谱研究离子液体[MPIM][I]与石墨烯氧化物之间的相互作用

本研究利用红外光谱研究不同压力下离子液体1-Methy1-3-propylimidazolium iodide([MPIM][I])与石墨烯及其氧化物的相互作用.结果表明,[MPIM][I]对压力的变化具有高敏感度,咪唑环与烷基链在0.4 GPa时产生相变化,可明显观察到吸收峰的裂解,且连续加压会导致咪唑环与烷基链的振动频率蓝移.[MPIM][I]与石墨烯作用时加压至2.5 GPa也未观测到相变化的产生,且咪唑环与烷基链的振动频率蓝移趋势也不明显;[MPIM][I]与石墨烯氧化物作用时咪唑环与烷基链的结果与添加石墨烯时几乎相同.石墨烯氧化物具有羟基、羧基、环氧基等共价键结在其表面,这些羟基会扰动[MPIM][I]中的咪唑环与烷基链,导致在常压下振动频率发生蓝移,进而表明石墨烯表面的官能基团会与离子液体产生相互作用.