共查询到16条相似文献,搜索用时 125 毫秒
1.
简支夹层矩形板的非线性弯曲 总被引:10,自引:3,他引:7
本文应用变分法导出了具有软夹心的夹层矩形板的非线性弯曲理论的基本方程和边界条件.然后,使用摄动法研究了均布横向载荷作作用下简支夹层矩形板的非线性弯曲问题,得到了相当精确的解析解. 相似文献
2.
本文提供了一个求解任意形状弹性薄板弯曲的新方法,在求得了极坐标系中弹性薄板弯曲微分方程的精确解后,将解代入薄板的边界条件,利用Fourier级数将边界方程展开,可确定出各待定常数,所得结果是精确的。 相似文献
3.
提出了计算带单边裂纹三点弯曲试样动态应力强度因子的新方法.首先由权函数的普遍形式和两种参考载荷下的应力强度因子,得到了带单边裂纹三点弯曲试样的权函数,然后考虑试样的转动惯性和剪切变形,根据振动理论推导出无裂纹梁内的动应力响应和分布,最后由权函数的思想推导出了带裂纹三点弯曲试样动态应力强度因子公式.通过有限元数值计算,验证了该方法的正确性,结果比较表明公式具有较高的精度.另外,还研究了冲击载荷下三点弯曲试样的动态应力强度因子随裂纹长度和加载速率的变化规律. 相似文献
4.
5.
6.
三边夹紧一边自由的矩形厚板的弯曲 总被引:5,自引:2,他引:3
利用厚板的Reissner理论中的广义简支边概念[1]得到了三边夹紧一边自由受均布横向载荷作用的矩形厚板的精确解.研究和考察了板的厚度对弯曲的影响及薄板弯曲的Kirchhoff理论的适用范围. 相似文献
7.
求解厚矩形板弯曲问题的功的互等定理法 总被引:22,自引:0,他引:22
在本文中,功的互等定理法(RTM)被推广于求解基于Reissner理论的厚矩形板弯曲问题。首先,本文绘出了厚矩形板弯曲的基本解;其次,给出了三边固定一边自由在均布载荷作用下厚矩形板弯曲的精确解析解;最后,我们分析了本文解的数值结果。 相似文献
8.
含裂纹的圆柱体弯曲的研究有十分重要的意义。文献[1]~[4]研究过含径向裂纹或裂纹系的情形,[5]研究过有同心圆弧裂纹的圆柱体的弯曲。本文继续[6]对内部出现在任意位置的直线裂纹的圆柱体在力与裂纹垂直时的弯曲问题,用弹性理论复变函数方法进行了讨论;得到了位移、应力和应力强度因子用级数表示的表达式;对Ah小的这种弯曲问题的应力强度因子给出了好的近似式,分析了它们随裂纹中心的变化规律。最后对裂纹的一个尖端在原点的径向裂纹圆柱体的扭转率和弯曲中心进行了计算,其结果与[1]几乎完全相同。 相似文献
9.
本文应用有限积分变换法研究Winkler地基上四边自由正交各向异性矩形中厚板的弯曲问题.具体由正交各向异性矩形中厚板弯曲的基本方程组和边界条件出发,结合有限积分变换法及其对应的逆变换法推导出正交各向异性矩形中厚板弯曲问题的解析解.该解析解统一适用于计算各向同性/正交各向异性矩形薄板、中厚板和厚板的弯曲问题,并且通过具体算例验证了所得解析解的正确性. 相似文献
10.
考虑横向剪切效应的悬臂矩形板的弯曲 总被引:8,自引:0,他引:8
本文以Reissner板理论为基础,利用厚板的广义简支边概念及迭加法,求得了考虑横向剪切效应的悬臂矩形板弯曲的精确解.从所得结果来看,这种方法是有效的. 相似文献
11.
非均匀圆柱型正交各向异性圆板的弯曲问题 总被引:1,自引:1,他引:0
本文研究了非均匀圆柱型正交各向异性圆板的弯曲问题,求得了折算刚度随半径按指数函数规律变化的非均匀圆柱型正交各向异性圆板在横向均布载荷作用下的通解,并给出了周边固定夹支条件下的精确解。 相似文献
12.
13.
V. A. Polyakov R. P. Shlitsa V. V. Khitrov V. I. Zhigun 《Mechanics of Composite Materials》1999,35(6):471-486
The bending characteristics of a composite panel with asymmetric layered structure under local surface loads are obtained. A refined version of the applied theory is developed using the analytical solution of the bending problem of a sandwich plate with arbitrary asymmetric structure under a point load. Local effects are investigated within the limits of a discrete model allowing for the specific character of elastic properties of a soft filler. The advantages of the solution are expressions of bending characteristics — layer curvatures, displacements, and stresses — in a closed form. It is shown that these characteristics can vary several times depending on the asymmetry parameters of the structure. Degeneration peculiarities of the solution, stemming from the slipping of layers or, otherwise, their rigid linking by the Kirchoff—Love hypothesis, as well as from account of the transverse shear and compression of the normal, are examined in line with the degeneration of geometric and physical parameters of the discrete model adopted. The results obtained are illustrated by curves and surfaces for the characteristics studied.Submitted for the 11th International Conference on the Mechanics of Composite Materials (Riga, June 11–15, 2000).Institute of Polymer Mechanics, Latvian University, Riga, LV-1006 Latvia. Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 6, pp. 717–742, November–December, 1999. 相似文献
14.
本文在von Kármán型板理论的基础上,采用双重Fourier级数方法,研究了对称正交层合矩形板在简支边条件下,承受任意分布横向载荷和面内载荷联合作用的非线性弯曲问题,得到了满足控制方程和边界条件的解. 相似文献
15.
A problem on the transverse-longitudinal bending of reinforced plates of variable thickness under a thermal-force loading
is formulated. A qualitative analysis of the problem is carried out, and a way of its linearization is indicated. Calculations
of isotropic and metal composite plates subjected to the transverse or transverse-longitudinal bending showed that their bearing
capacity in the elastoplastic bending is a number of times (occasionally, by an order of magnitude) greater than in the elastic
bending. The heating of the plates sharply decreases their resistance to the bending in the case of elasticity and affects
it only slightly in the case of elastoplasticity. In the elastoplastic bending, the bearing capacity of the metal composite
plate a number of times exceeds that of isotropic plates made of conventional structural metal alloys.
__________
Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 6, pp. 715–742, November–December, 2005. 相似文献
16.
无拉力Winkler地基上自由边矩形Reissner板的弯曲 总被引:6,自引:0,他引:6
本文提出了一种求解无拉力Winkler地基上自由边矩形Reissner板受任意载荷的弯曲问题的解析方法.通过适当设定满足可导条件的Fourier级数加补充项形式的挠度函数和剪力函数,把给定边界条件下的微分方程化成最简形式的无穷代数方程组.对于常规的Winkler地基,可直接求解;而对于无拉力Winkler地基,方程组为一组弱非线性代数方程组.使用迭代法容易得到解. 相似文献