Alkenes as ketol surrogates-a new approach toward enantiopure acyloins

[reaction: see text] Enantiopure alpha-hydroxy ketones are important building blocks in organic synthesis. This paper describes the use of cyclic ruthenates for the first catalytic regioselective oxidation of vic-diols to alpha-ketols. The combination of RuCl3/Oxone/NaHCO3 was used in a two-step sequence of asymmetric dihydroxylation and regioselective monooxidation for the synthesis of a broad scope of enantiopure acyloins.     

Diastereoselective Ru-catalyzed cross-metathesis-dihydroxylation sequence. an efficient approach toward enantiomerically enriched syn-diols

Sequential catalysis has evolved as a powerful concept within the past years and allows the more efficient use of catalytically active expensive transition metals in organic synthesis. In this paper we present the stereoselective cross-metathesis-dihydroxylation of various olefins with chiral auxiliary substituted acrylamides. The chiral information (i.e., the auxiliary) introduced in the metathesis reactions allows for a stereoselective subsequent RuO4-catalyzed dihydroxylation. The sequence is concluded by an unusual kinetic resolution of the diastereomeric diols obtained in the oxidation reaction. As a consequence a variety of structurally diverse enantiomerically enriched diols are obtained. To the best of our knowledge the results summarized in this paper represent the first highly efficient diastereoselective RuO4-catalyzed oxidation.     

RuCl3/CeCl3/NaIO4: a new bimetallic oxidation system for the mild and efficient dihydroxylation of unreactive olefins

[reaction: see text] The catalytic dihydroxylation of olefins represents a unique synthetic tool for the generation of two C,O-bonds with defined relative configuration. Whereas OsO(4) has been established as a very general dihydroxylation catalyst within the past 30 years, the less expensive and toxic isoelectronic RuO(4) has found only limited use for this type of oxygen-transfer reaction. High catalyst loading and undesired side reactions were severe drawbacks in RuO(4)-catalyzed oxidations of C,C-double bonds. Recently, we were able to improve the RuO(4)-catalyzed dihydroxylation by addition of Bronsted acids to the reaction mixture. This protocol proved to be of general applicability, however, certain limitations were observed. To address these problematic functional groups a new Lewis acid accelerated oxidation was developed. The use of only 10 mol % of CeCl(3) allowed a further decrease in the catalyst concentration down to 0.25 mol % while broadening the scope of the reaction. Silyl ethers and nitrogen containing functional groups are now tolerated in this optimized protocol. Furthermore, competing scission reactions are supressed in the presence of Lewis acid allowing longer reaction times and the successful oxidation of electron-deficient tetrasubstituted double bonds that cannot be oxidized using known dihydroxylation protocols.     

Zeolite-confined Nano-RuO(2): A green,selective, and efficient catalyst for aerobic alcohol oxidation

The development of green, selective, and efficient catalysts, which can aerobically oxidize a variety of alcohols to their corresponding aldehydes and ketones, is of both economic and environmental significance. We report here the synthesis of a novel aerobic oxidation catalyst, a zeolite-confined nanometer-sized RuO(2) (RuO(2)-FAU), by a one-step hydrothermal method. Using the spatial constraints of the rigid zeolitic framework, we sucessfully incorporated RuO(2) nanoparticles (1.3 +/- 0.2 nm) into the supercages of faujasite zeolite. Ru K-edge X-ray absorption fine structure results indicate that the RuO(2) nanoclusters anchored in the zeolite are structurally similar to highly hydrous RuO(2); that is, there is a two-dimensional structure of independent chains, in which RuO(6) octahedra are connected together by two shared oxygen atoms. In our preliminary catalytic studies, we find that the RuO(2) nanoclusters exhibit extraordinarily high activity and selectivity in the aerobic oxidation of alcohols under mild conditions, for example, air and ambient pressure. The physically trapped RuO(2) nanoclusters cannot diffuse out of the relatively narrow channels/pores of the zeolite during the catalytic process, making the catalyst both stable and reusable.     

Total synthesis of 6-deoxyclitoriacetal isolated from Stemona collinsae Craib.

A total synthesis of the rotenoid, 6-deoxyclitoriacetal, a cytotoxic natural product, was successfully achieved by using platinum-catalysed hydroarylation, Sharpless asymmetric dihydroxylation, regioselective IBX diol oxidation and stereoselective intramolecular keto-aldehyde pinacol coupling as the key steps.     

Stereoselective synthesis of revised structure of stagonolide G

A concise total synthesis of the revised structure of stagonolide G has been achieved in 11 steps and with an overall yield of 31.7%. Key reaction sequence includes BAIB/TEMPO mediated tandem oxidation and lactonization, Lindlar’s hydrogenation, regioselective epoxide opening by an in situ generated alkynyl as nucleophile, Sharpless asymmetric dihydroxylation, and Jacobsen kinetic resolution.     

Facile and regioselective synthesis of functionalized benzenes via cascade reactions of 1,2-allenic ketones with 4-sulfonyl crotonates

An efficient and regioselective synthesis of functionalized benzenes via the cascade reactions of 1,2-allenic ketones with 4-sulfonyl crotonates under mild reaction conditions has been established. Mechanistically, the formation of the title compounds involves a cascade procedure consisting of an intermolecular regioselective Michael addition followed by an intramolecular condensation and aromatization. Compared with those of α,β-unsaturated aldehydes/ketones, the reactions of 1,2-allenic ketones with 4-sulfonyl crotonates demonstrated contrary regio-selectivity and distinct reaction conditions. Moreover, the functionalized benzene products obtained herein were found to be ready intermediates for the synthesis of fluorenone and anthracenone derivatives.     

A synthesis of pseudoconhydrine and its epimer via hydroformylation and dihydroxylation

A synthesis of the alkaloid pseudoconhydrine and its epimer has been achieved using tandem hydroformylation-condensation to form the six-membered ring and stereoselective dihydroxylation to introduce oxygenation. The stereoselectivity of dihydroxylation can be explained by lipophilic and electrostatic effects, supported by DFT calculations. The alkaloids can be obtained either by regioselective dehydroxylation or by rearrangement, followed by reduction.     

壳聚糖负载贵金属催化剂的研究进展

壳聚糖负载的贵金属催化剂显示了高催化活性和高选择性，已被用于氧化反应、氢化反应、烯丙基取代反应、羰基化反应、Suzuki和Heck偶联反应、烯烃的不对称二羟基化反应及有机醛、酮的合成反应体系中。本文对其制备方法、可能结构及其在各种反应体系中的催化性能进行了综述。     

Structures and properties of zirconia-supported ruthenium oxide catalysts for the selective oxidation of methanol to methyl formate

The effects of RuO(x) structure on the selective oxidation of methanol to methyl formate (MF) at low temperatures were examined on ZrO(2)-supported RuO(x) catalysts with a range of Ru surface densities (0.2-3.8 Ru/nm(2)). Their structure was characterized using complementary methods (X-ray diffraction, Raman and X-ray photoelectron spectra, and reduction dynamics). The structure and reactivity of RuO(x) species change markedly with Ru surface density. RuO(x) existed preferentially as RuO(4)(2-) species below 0.4 Ru/nm(2), probably as isolated Zr(RuO(4))(2) interacting with ZrO(2) surfaces. At higher surface densities, highly dispersed RuO(2) domains coexisted with RuO(4)(2-) and ultimately formed small clusters and became the prevalent form of RuO(x) above 1.9 Ru/nm(2). CH(3)OH oxidation rates per Ru atom and per exposed Ru atom (turnover rates) decreased with increasing Ru surface density. This behavior reflects a decrease in intrinsic reactivity as RuO(x) evolved from RuO(4)(2-) to RuO(2), a conclusion confirmed by transient anaerobic reactions of CH(3)OH and by an excellent correlation between reaction rates and the number of RuO(4)(2-) species in RuO(x)/ZrO(2) catalysts. The high intrinsic reactivity of RuO(4)(2-) structures reflects their higher reducibility, which favors the reduction process required for the kinetically relevant C-H bond activation step in redox cycles using lattice oxygen atoms involved in CH(3)OH oxidation catalysis. These more reactive RuO(4)(2-) species and the more exposed ZrO(2) surfaces on samples with low Ru surface density led to high MF selectivities (e.g. approximately 96% at 0.2 Ru/nm(2)). These findings provide guidance for the design of more effective catalysts for the oxidation of alkanes, alkenes, and alcohols by the synthesis of denser Zr(RuO(4))(2) monolayers on ZrO(2) and other high surface area supports.     

Regioselective synthesis of polysubstituted pyrazoles and isoxazoles

A regioselective synthesis has been developed for the preparation of unsymmetrical 1,3,5-triaryl-4-alkylpyrazolines and -pyrazoles by treatment of alpha-benzotriazolyl-alpha,beta-unsaturated ketones with monosubstituted hydrazines followed by alkylation at the 4-position of the pyrazoline ring. Reaction of alpha-benzotriazolyl-alpha,beta-unsaturated ketones with hydroxylamine gives 3,5-disubstituted isoxazoles regioselectively.     

De novo asymmetric synthesis of (−)-nanaomycin A

The de novo asymmetric total synthesis of (?)-nanaomycin A is described. The entirely linear route required only 13 steps from commercially available starting materials (3% overall yield). Key transformations include a Claisen rearrangement, an asymmetric dihydroxylation, a regioselective tosylation, a diastereoselective intramolecular Friedel-Crafts alkylation and a nitrile hydrolysis. As the route relies on a Sharpless asymmetric dihydroxylation it is equally amenable for the synthesis of (+)-nanaomycin A.     

An efficient transformation of cyclic ene-carbamates into omega-(N-formylamino)carboxylic acids by ruthenium tetroxide oxidation

The ruthenium tetroxide (RuO(4)) oxidation of cyclic ene-carbamates resulted in the endo-cyclic carbon-carbon double bond cleavage to afford the corresponding omega-(N-formylamino)carboxylic acids in good yields. Substituted cyclic ene-carbamates derived from (3R)-3-hydroxypiperidine hydrochloride were converted into the N-Boc 4-aminobutyric acids by utilization of the RuO(4) oxidation as the key step, which were further transformed into (3R)-4-amino-3-hydroxybutyric acid, an important key intermediate for the synthesis of L-carnitine.     

Studies toward the enantioselective syntheses of oxylipins: total synthesis and structure revision of solandelactone E

An efficient and general entry to unsaturated cyclopropane- and lactone-containing oxylipins of marine origin has been designed and applied to the first enantioselective total synthesis of solandelactone E. The synthesis, which proceeds in a total of 23 steps from commercially available materials, features a diastereoselective acetal-directed cyclopropanation of an electron-deficient diene, a regioselective Sharpless enantioselective dihydroxylation, and a stereoselective [2,3]-sigmatropic rearrangement of a selenoxide to effect a 1,3-transposition of an allylic alcohol. Comparison of spectral data for the synthetic solandelactone, thus prepared, with data in the literature led to a revision of the original structural assignments of the C(11)-epimeric solandelactones.     

Asymmetric synthesis of (−)-α-conhydrine

The enantioselective synthesis of (−)-α-conhydrine has been achieved by two different synthetic routes. The key steps include Sharpless asymmetric dihydroxylation, regioselective opening of a cyclic sulfate and Wittig olefination.     

Enantioselective synthesis of (R)-(−)-mevalonolactone via cyclic sulfate methodology

An asymmetric synthesis of (R)-(−)-mevalonolactone is described using the Sharpless asymmetric dihydroxylation and the regioselective nucleophilic opening of a cyclic sulfate as key steps.     

Enantioselective syntheses of colletodiol,colletol, and grahamimycin A

[reaction: see text] The enantioselective synthesis of colletodiol has been achieved in 11 steps from methyl 1,3,5-octatrienoate and 16 total steps from both ethyl sorbate and methyl 1,3,5-octatrienoate. The route relies upon an enantio- and regioselective Sharpless dihydroxylation and a palladium-catalyzed reduction to form a 5-hydroxy-1-enoate and an 7-hydroxy-1,3-dienoate. These esters were further functionalized, coupled, and macrolactonized to provide colletodiol after deprotection. Grahamimycin A and colletol were synthesized in one and two steps, respectively, from colletodiol.     

Diastereoselective dihydroxylation and regioselective deoxygenation of dihydropyranones: a novel protocol for the stereoselective synthesis of C1-C8 and C15-C21 subunits of (+)-discodermolide

Diastereoselective dihydroxylation of dihydropyranones and subsequent regioselective alpha-deoxygenation provides 1,3-trans-beta-hydroxy-delta-lactones stereoselectively. This protocol has been applied for the synthesis of C(1)-C(8) and C(15)-C(21) subunits of (+)-discodermolide.     

Stereoselective synthesis of C1-C9 and C9-C17 fragments of (+)-13-deoxytedanolide

An efficient and highly stereoselective asymmetric synthesis of C1-C9 and C9-C17 fragments of (+)-13-deoxytedanolide have been achieved. Utilization of desymmetrization technique to prepare the triol with five stereogenic centers, regioselective Sharpless asymmetric dihydroxylation, Evans' aldol reaction, chiral methylation, and Wittig olefination are highlights of the synthesis.