Electrochemical properties of niosomes modified Au electrode and DNA recognition

Non-ionic surfactant vesicles (NSVs), also referred to as niosomes, have been studied as an alternative to conventional liposomes. In this paper, electrochemical inspection of the interaction between Herring sperm DNA and niosomes has been investigated after a simple and novel method for the formation of niosomes on Au electrode. Each step of electrode modification has been confirmed with cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The assembly of octadecanethiol (ODT) layer on the electrode surface generates a packed film that introduces a barrier to the interfacial electron transfer (R(et)), and the subsequent immobilization of niosomes onto the self-assembled monolayer (SAM) layer results in a further increase of R(et), due to the formed bilayer almost blocked the redox probe to the electrode surface. When Herring sperm DNA was added, the R(et) value decreased, indicating that the barrier of the redox probe to the surface was disrupted. The addition of DNA caused the formation of some transmembrane channels for the redox probe across the niosomes. A good linear relationship between R(et) value and DNA concentration was found over the 0-0.05 mg mL(-1) concentration range.     

Cellobiose dehydrogenase modified electrodes: advances by materials science and biochemical engineering

The flavocytochrome cellobiose dehydrogenase (CDH) is a versatile biorecognition element capable of detecting carbohydrates as well as quinones and catecholamines. In addition, it can be used as an anode biocatalyst for enzymatic biofuel cells to power miniaturised sensor–transmitter systems. Various electrode materials and designs have been tested in the past decade to utilize and enhance the direct electron transfer (DET) from the enzyme to the electrode. Additionally, mediated electron transfer (MET) approaches via soluble redox mediators and redox polymers have been pursued. Biosensors for cellobiose, lactose and glucose determination are based on CDH from different fungal producers, which show differences with respect to substrate specificity, pH optima, DET efficiency and surface binding affinity. Biosensors for the detection of quinones and catecholamines can use carbohydrates for analyte regeneration and signal amplification. This review discusses different approaches to enhance the sensitivity and selectivity of CDH-based biosensors, which focus on (1) more efficient DET on chemically modified or nanostructured electrodes, (2) the synthesis of custom-made redox polymers for higher MET currents and (3) the engineering of enzymes and reaction pathways. Combination of these strategies will enable the design of sensitive and selective CDH-based biosensors with reduced electrode size for the detection of analytes in continuous on-site and point-of-care applications.     

Polymer-based bilayer interfaces for electrochemical rectification

In this paper, the electrochemical current rectification phenomenon exhibited at an electrochemical interface constituted by a glassy carbon electrode covered with a bilayer of polymer films is discussed. The authors have shown that Methylene Blue (MB) redox species can be confined to a very thin insulating polymer film formed from orthophenylene diamine. The poly(opd) film exhibited excellent blocking properties to redox molecules in solution. On the other hand, the insulating poly(opd) film trapped with MB could mediate electron transfer between the redox molecules in solution and the electrode. Further, a second polymeric layer (Nafion film) trapped with ferrocene redox species was formed as the outer layer over the inner poly (opd) film containing MB. This bilayer-modified electrode, due to the significant difference in the redox potentials of the MB and ferrocene species immobilized in the inner and outer layers, respectively, exhibits unidirectional current flow and the results of the voltammetric investigations on the modified electrodes are described in this communication.     

Pt/十六烷基三甲基溴化铵纳米聚集体修饰玻碳电极促进析氢(英文)

A novel, cost‐effective, and simple electrocatalyst based on a Pt‐modified glassy carbon electrode (GCE), using cetyltrimethylammonium bromide (CTAB) as a cationic surfactant, is reported. Am‐phiphilic CTAB molecules were adsorbed on GCE by immersion in a CTAB solution. The positively charged hydrophilic layer, which consisted of small aggregates of average size less than 100 nm, was used for accumulation and complexation of [PtCl6]2? anions by immersing the electrode in K2PtCl6 solution. The modified electrode was characterized using scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, impedance spectroscopy, and electrochemical methods. The electrocatalytic activity of the Pt particles in the hydrogen evolution reaction (HER) was investigat‐ed. The results show that the CTAB surfactant enhances the electrocatalytic activity of the Pt parti‐cles in the HER in acidic solution.     

CTAB-promoted prussian blue-modified electrode and its cation transport characteristics for K+, Na+, Li+, and NH4+ ions

A Prussian blue (PB) film was deposited on a glassy carbon (GC) electrode by cyclic voltammetry in the presence of the cationic surfactant cetyltrimethylammonium bromide (CTAB). The electrode thus formed showed 4-fold enhancements in redox current and charge values in pure KCl electrolyte as well as greater stability than an electrode prepared in the absence of CTAB. This improved performance of a PB+CTAB electrode versus a PB electrode was further demonstrated using SEM, XRD, and electrochemical impedance spectroscopy (EIS) measurements. A comparative study was undertaken on the cation transport characteristics of PB and PB+CTAB electrodes for Na+, Li+, and NH4+ ions. We obtained a CV pattern for a CTAB-promoted PB film, which showed ideal Nernstian behavior at all scan rates from 5 to 140 mV s(-1). Conditions for the formation and preservation of these ideal and stable PB films are discussed. Possible mechanisms for the beneficial effects of CTAB are proposed.     

血红蛋白在类生物膜修饰电极上的直接电化学

使用掺合单壁碳纳米管(SWCNT)的不溶性表面活性剂双十二烷基二甲基溴化铵(DDAB)修饰玻碳电极,并将血红蛋白(Hb)固定在修饰膜中制得了稳定的固载Hb的修饰电极.循环伏安和交流阻抗测试表明,固定在电极上的Hb是一个受吸附控制的可逆电子传递过程.该氧化还原过程的CV扫描峰电位与溶液pH值成良好的线性关系,斜率39 mV/pH,表明在发生Hb直接电子传递反应的同时伴随有质子参与反应.掺合SWCNT的类生物膜修饰电极较之不掺合SWCNT的修饰电极对氧气的还原具有更好的催化作用.并以SWCNT掺合量为1 mg.mL-1的DDAB修饰电极性能最佳.     

A novel carbon electrode material for highly improved EDLC performance

Porous materials, developed by grafting functional groups through chemical surface modification with a surfactant, represent an innovative concept in energy storage. This work reports, in detail, the first practical realization of a novel carbon electrode based on grafting of vinyltrimethoxysilane (vtmos) functional group for energy storage in electric double layer capacitor (EDLC). Surface modification with surfactant vtmos enhances the hydrophobisation of activated carbon and the affinity toward propylene carbonate (PC) solvent, which improves the wettability of activated carbon in the electrolyte solution based on PC solvent, resulting in not only a lower resistance to the transport of electrolyte ions within micropores of activated carbon but also more usable surface area for the formation of electric double layer, and accordingly, higher specific capacitance, energy density, and power capability available from the capacitor based on modified carbon. Especially, the effects from surface modification become superior at higher discharge rate, at which much better EDLC performance (i.e., much higher energy density and power capability) has been achieved by the modified carbon, suggesting that the modified carbon is a novel and very promising electrode material of EDLC for large current applications where both high energy density and power capability are required.     

Surface activity and redox behavior of a non-ionic surfactant containing a phenothiazine group

A novel non-ionic surfactant, -(phenothiazinylhexyl)-ω-hydroxy-oligo(ethylene oxide) (PCPEG) containing phenothiazine as an electro-active group has been synthesized. Fundamental interfacial behavior of the surfactant at the air/water interface has been investigated by means of surface tensiometry to provide an insight into the relationship between the structure of the hydrophobic moiety and the surfactant properties. A comparison of diffusivity of PCPEG in the aqueous phase with that in the acetonitrile solution at high PCPEG concentrations shows that micellization has a pronounced effect on the redox behavior of PCPEG. The electrochemical responses for PCPEG aqueous solutions at the interface of a glassy carbon electrode are fairly dependent on the concentration of PCPEG. Above CMC, PCPEG molecules self-associate to form micellar aggregates and the formation and disruption of micelles can be reversibly controlled by change in the redox state of the phenothiazine group. The cyclic voltammetric responses for PCPEG aqueous solutions have been correlated with the dissolved states to explain the distinctive feature of the surfactant.     

Magnetoswitchable electrochemistry gated by alkyl-chain-functionalized magnetic nanoparticles: control of diffusional and surface-confined electrochemical processes

Magnetic nanoparticles consisting of undecanoate-capped magnetite (average diameter ca. 5 nm) are used to selectively gate diffusional and surface-confined electrochemical reactions. A two-phase system consisting of an aqueous buffer solution and a toluene phase that includes the suspended undecanoate-capped magnetic nanoparticles is used to control the interfacial properties of the electrode surface. Two different phenomena are controlled by attraction of the magnetic nanoparticles to the electrode by means of an external magnet: (i) The attracted magnetic nanoparticles form a hydrophobic layer on the electrode surface resulting in the blocking of diffusional electrochemical processes, while retaining the redox functions of surface-confined electrochemical units. (ii) For certain surface-immobilized redox species (e.g., quinones), the attraction of the magnetic nanoparticles to the electrode surface alters the mechanism of the process from an aqueous-type electrochemistry to a dry organic-phase-type electrochemistry. Also, bioelectrocatalytic and electrocatalytic transformations at the electrode are controlled by means of attraction of the magnetic nanoparticles to the electrode surface. Controlling the catalytic functions of the modified electrode by means of the magnetic nanoparticles attracted to the electrode is exemplified in two different directions: (i) Blocking of the bioelectrocatalyzed oxidation of glucose by glucose oxidase (GOx) using a surface-confined ferrocene monolayer as electron-transfer mediator. (ii) Activation of the microperoxidase-11 electrocatalyzed reduction of cumene hydroperoxide. In the latter system, the hydrophobic magnetic nanoparticles adsorb toluene, and the hydrophobic matrix acts as a carrier for cumene hydroperoxide to the electrode surface modified with the microperoxidase-11 catalyst.     

Electrochemical properties of niosomes modified Au electrode and DNA recognition

Non-ionic surfactant vesicles (NSVs), also referred to as niosomes, have been studied as an alternative to conventional liposomes. In this paper, electrochemical inspection of the interaction between Herring sperm DNA and niosomes has been investigated after a simple and novel method for the formation of niosomes on Au electrode. Each step of electrode modification has been confirmed with cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The assembly of octadecanethiol (ODT) layer on the electrode surface generates a packed film that introduces a barrier to the interfacial electron transfer (R_et), and the subsequent immobilization of niosomes onto the self-assembled monolayer (SAM) layer results in a further increase of R_et, due to the formed bilayer almost blocked the redox probe to the electrode surface. When Herring sperm DNA was added, the R_et value decreased, indicating that the barrier of the redox probe to the surface was disrupted. The addition of DNA caused the formation of some transmembrane channels for the redox probe across the niosomes. A good linear relationship between R_et value and DNA concentration was found over the 0–0.05 mg mL⁻¹ concentration range.     

Disposable electrochemical biosensor with multiwalled carbon nanotubes-chitosan composite layer for the detection of deep DNA damage.

A novel electrochemical DNA-based biosensor for the detection of deep DNA damage was designed employing the bionanocomposite layer of multiwalled carbon nanotubes (MWNT) in chitosan (CHIT) deposited on a screen printed carbon electrode (SPCE). The biocomponent represented by double-stranded (ds) herring sperm DNA was immobilized on this composite using layer-by-layer coverage to form a robust film. Individual and complex electrode modifiers are characterized by a differential pulse voltammetry (DPV) with the DNA redox marker [Co(phen)(3)](3+), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) with [Fe(CN)(6)](3-) as a redox probe in a phosphate buffer solution (PBS). A good correlation between the CV and EIS parameters has been found, thus confirming a strong effect of MWNT on the enhancement of the electroconductivity of the electrode surface and that of CHIT on the MWNT distribution at the electrode surface. Differences between the CV and EIS signals of the electrodes without and with DNA are used to detect deep damage to DNA, advantageously using simple working procedures in the same experiment.     

Electron-transfer mediation on poly-aryl dendrimer-modified electrodes

Electrochemical properties of a dendrimer-modified electrode that was prepared by immobilization of ferrocenyl-terminated dendrimers on a poly-phenyl acetate anchoring layer were investigated in CH₂Cl₂. The anchoring layer was made by electro-grafting of the corresponding diazonium salt on a glassy carbon surface. The method allows the fabrication of a robust interface where the properties of the dendrimers are well-preserved. Moreover, the control of the layer properties as the permeation of molecules from the solution to the surface could be tuned up from only limited to totally blocked through the electrochemical conditions used during the electro-grafting of the anchoring layer. Detailed investigations performed with cyclic voltammetry and on different types of layers show that the modified electrode catalyses the oxidation of redox substrates. The process depends on the standard potential of the redox couple compared to that of the adsorbed dendrimer molecules. Experiments indicate that the electron exchange with molecules in solution takes place mainly at the dendrimer film–solution interface as the dendrimers inside the film permit the charge-transfer through the modified film to the carbon substrate. The interest of using robust electrode dendrimer relies on the possibility of large structural variations allowing the careful introduction of specific properties in the layer.     

Surface characterization and direct electrochemistry of redox copper centers of bilirubin oxidase from fungi Myrothecium verrucaria

The key characteristics of multicopper oxidases are redox potentials of Type 1, Type 2 and Type 3 copper centers of enzymes. However, there is still a challenge to obtain a value of the redox "signature" of the enzymes. In this study, the electrochemical behavior of T1 and T2/T3 redox copper centers of bilirubin oxidase (BOD) from the fungi Myrothecium verrucaria was studied based on direct bioelectrocatalysis. Two distinct redox peaks corresponding to reduction and oxidation of T1 and T2/T3 redox centers of enzymes have been clearly detected in anaerobic conditions. The bioelectrocatalytic activity of the enzyme was studied in the presence of oxygen and redox mediators. The electron-transfer rate constant for BOD immobilized on carbon electrode (CE) is 1.5 s(-1). The mechanism of enzyme inactivation by ABTS has been proposed. The physical architecture of BOD layers immobilized on the electrode surface, including elemental and chemical composition, relative thickness and assembly of layers was investigated by Angle Resolved X-ray photoelectron spectroscopy. Unique peaks of BOD at 288.5 eV and of CE at 284.6 eV were used in a substrate over layer model for estimation of the thickness of the of BOD film on the carbon electrode surface.     

热处理碳纸电极上VO2+/VO+2氧化还原动力学

在不同温度下热氧化处理碳纸, 用循环伏安、极化曲线和交流阻抗方法研究碳纸电极上VO2+/VO+2氧化还原动力学. 循环伏安和极化曲线结果表明, 随着热处理温度的升高, VO2+/VO+2氧化还原反应的速率常数及交换电流增大. 建立了VO2+/VO+2氧化还原反应的交流阻抗等效电路模型. 拟合结果表明, 热处理增大了碳纸电极表面的双电层电容, 减小了VO2+/VO+2氧化还原反应的电荷转移电阻. 用循环伏安和交流阻抗两种方法求得的VO2+和VO+2的扩散系数基本相同, 表明所构建的交流阻抗等效电路模型与电极反应过程相符合.     

Customizing the Electrochemical Properties of Carbon Nanodots by Using Quinones in Bottom‐Up Synthesis

We show how the redox potentials of carbon nanodots (CNDs) can be modulated by employing quinones as electroactive precursors during a microwave‐assisted synthesis. We prepared and characterized a redox library of CNDs, demonstrating that this approach can promote the use of carbon nanodots for ad hoc applications, including photocatalysis.     

The effects of cross-linking and anodic surface roughening on quinone polymer/carbon electrodes

A polymer in which anthraquinone-2-carbonyl groups were bound to polyethyleneimine was coated onto a glassy carbon electrode. Electrodes of this kind were studied using cyclic voltammetry and pH 7 aqueous solutions. At pH <10 only those quinone units in contact with the carbon surface are electroactive. It was shown that anodic surface roughening increased the limited number of electroactive groups in the polymer film and gave more stable activity and narrower voltammetric peaks. Above pH 10 redox propagation through the layer is more rapid but the anionic product desorbs. This desorption was inhibited by cathodically cross-linking a layer of mixed polymers on a polyethyleneimine backboned polymer containing fluorenone units as well as anthraquinone units.     

Voltammetric Behavior of 1,4‐Dimethoxypillar[m]arene[n]quinones

The electrochemical properties of a series of 1,4‐dimethoxypillar[m]arene[n]quinones (DMP[m]A[n]Qs) and the interactions between individual quinone units have been investigated on glassy carbon electrode in acetonitrile. All the quinone units showed relative electron uptake behavior except 1,4‐dimethoxypillar[5]quinones (DMP[5]Q). The results have shown that the electrochemical behavior of the DMP[m]A[n]Qs is comparatively different from that of their related linear quinone analogues. The resultant properties were attributed to the close proximity of redox‐active sites as well as the delocalization of electrons on the aromatic rings. Another aspect to be considered responsible for their electronic properties was suggested to be the electrostatic repulsions between adjacent quinone units in these complex structures. Current studies provide a better understanding on the voltammetric behavior of pillararene derivatives with different numbers of quinone units as well as their future scope in certain future electrochemical applications.     

Enzymatic Biosensors Based on Carbon Nanotubes Paste Electrodes

The performance of enzymatic biosensors based on the immobilization of different enzymes within a carbon nanotubes paste electrode (CNTPE) prepared by dispersion of multi‐wall carbon nanotubes (MWNT) and mineral oil is reported in this work. The strong electrocatalytic activity of carbon nanotubes towards the reduction of hydrogen peroxide and quinones and the oxidation of NADH have allowed an effective low‐potential amperometric determination of lactate, phenols, catechols and ethanol, in connection with the incorporation of lactate oxidase, polyphenol oxidase and alcohol dehydrogenase/NAD⁺, respectively, within the composite matrix. Compared to the analogous enzymatic CPEs, a great enhancement in the response is observed at the enzymatic CNTPEs. Therefore, highly sensitive lactate, phenols, catechols and alcohols biosensors without using any metal or redox mediator can be obtained with this new composite material.     

The influence of promoter and of electrode material on the cyclic voltammetry of Pisum sativum plastocyanin

The reversible cyclic voltammetry of pea plastocyanin (Pisum sativum) was studied with a wide range of electrodes: edge-oriented pyrolytic graphite (PGE), glassy carbon (GCE), gold (Au) and platinum (Pt) electrodes. Plastocyanin was coated onto the electrode surface by exploiting the electrostatic interaction between the negatively charged protein and a wide range of positively charged promoters. The effect of the redox response with an extended range of promoters, including poly-L-lysine, polymyxin B, neomycin, tobramycin, geneticin, spermine and spermidine, were included in this study. The resulting cyclic voltammograms reveal that the observed midpoint potential for plastocyanin can be shifted significantly depending on the choice of promoter. The stability of the negatively charged plastocyanin-promoter layer on an electrode was gauged by the rate of bulk diffusion of the protein from the immobilised film into the solution. Reversible cyclic voltammograms were obtained using edge-oriented pyrolytic graphite (PGE) and glassy carbon electrodes (GCE) with all promoters; however, platinum and gold electrodes were unable to sustain a defined redox response. The combination of pyrolytic graphite electrode/poly-L-lysine/plastocyanin was found to be the most stable combination, with a redox response which remained well defined in solution for more than 1 h at pH 7.0. The midpoint potentials obtained in this manner differed between the two graphite electrodes PGE and GCE using poly-L-lysine as the promoter. This effect was in addition to the expected pH dependence of the midpoint potential for plastocyanin and the results indicated that the pK(a) for plastocyanin on PGE was 4.94 compared to that on GCE of 4.66. It is concluded that both the electrode material and the nature of the promoter can influence the position of the redox potentials for proteins measured in vitro. This study extends the range of biogenic promoters used in combination with electrode materials. Thus, we can begin to develop a more comprehensive understanding of electrode-protein interactions and draw conclusions as to metalloprotein function, in vivo. To support these studies, we have sought information as to the nature of the electrode/promoter/protein interaction using scanning tunneling microscopy (STM) to study both the promoter and the plastocyanin protein on a gold surface.     

超薄层红外光透电解池的设计和应用

采用真空镀膜技术制得了超薄型红外光透极电极，设计了适用于水溶液体系和多种固体电极体系的红外光透薄层电解池，通过亚铁氰化钾水溶液／金电极体系和亚硫酰氯／碳电极体系的现场红外光谱电化学测试证明：该电解池具有结构简单，光谱响应灵敏，适用范围较宽等优点。