Performance of metal complex substituted polysiloxanes in capillary electrophoresis and capillary electrochromatography

Two novel polysiloxanes containing the metal complex, Co(TACN)(3+)2 (TACN= 1,4,7-triazacyclononane) were used as coatings for capillary electrophoresis (CE) and capillary electrochromatography (CEC). Through crosslinking and covalent bonding, the positively charged polymers were bonded to silica supports. In both CE and CEC, these coatings exhibited strong, pH-independent, and anodic electroosmotic flow (EOF), and had excellent long-term stability. Successful separations of aromatic acids were achieved in CE. In CEC, separation of alkylbenzenes (7 min) and basic compounds (20 min) was achieved with higher resolving power than conventional octadecyl silica packings. These polymers represent a new class of coatings for CE and CEC that generate pH-independent EOF.     

The influence of the preparation method and the Co loading on the structure and activity of cobalt oxide/gamma-alumina catalysts for NO reduction by propene

In the present work we studied the influence of the preparation method and the Co loading on the physicochemical properties and the catalytic activity of the cobalt oxide/gamma-alumina catalysts for the reduction of NO by propene under net oxidizing conditions. Two series of catalysts containing 1 and 5% w/w Co, respectively, were prepared using three preparation methods, namely, the equilibrium deposition filtration (EDF), the conventional incipient wetness impregnation (IWI) and the IWI adding nitrilotriacetic acid (nta) in the impregnating solution (IWInta). The catalysts were tested at various temperatures in the range 300-550 degrees C using a fixed-bed microreactor for the NO reduction by propene under lean burn conditions. The evolution of the Co species on the alumina surface was followed after each preparation step by diffuse reflectance spectroscopy (DRS). It was found that the catalysts of the first series were more active for the title reaction than those of the second one. The EDF sample of the first series was proved to be the most active and selective one followed by the IWI and then the IWInta sample of the same series. The DRS results indicated that the enhanced activity and selectivity of the EDF sample could be attributed to the increased concentration of isolated Co(II) inner sphere complexes of octahedral coordination, which are formed on the support surface by adsorption of the corresponding aqueous complexes, [Co(H2O)6]2+, being in the impregnating solution. These inner sphere complexes are transformed upon thermal treatment into a CoAl2O4 like phase with high dispersion. On the other hand, the [Co(H2O)6]2+(NO3)2- and [Co-nta]-.NH4+(or H+) and/or [Co-2nta]4+.4NH4+(or 4H+) complex salts, precipitated on the alumina surface upon drying in the cases of the IWI and IWInta samples, are transformed upon calcination into CoAl2O4 like phases with lower dispersion. All the samples of the second series promoted the propene combustion as well as the oxidation of NO and N2, used as carrier gas, to NO2. DRS results revealed that in all these samples cobalt(III) oxo species are formed in addition to the CoAl2O4 phase. These species are considered to be responsible for the enhancement of the rates of the oxidation reactions mentioned above.     

Heterometallic architectures based on the combination of heteroleptic copper and cobalt complexes with silver salts

A strategy for the formation of heterometallic coordination polymers based on novel copper(II) and cobalt(III) heteroleptic complexes (acacCN)Cu(dpm) and (acacCN)Co(dpm)(2) (acacCN = 3-cyanoacetylacetonate; dpm = dipyrrin) is presented. Using dipyrrins appended with a p- or m-pyridyl group, dpm-4py and dpm-3py, four novel copper and cobalt complexes were prepared and characterized both in solution and in the solid state. These two classes of complexes show different electrochemical properties upon investigation by cyclic voltammetry in CH(2)Cl(2). While the copper complexes show only irreversible reduction processes, the voltammogram of the cobalt species reveals the presence of two quasi-reversible reductions. In the solid state, the copper(II) compounds self-assemble to form one-dimensional architectures upon coordination of the peripheral pyridyl group to the copper center, as characterized by single-crystal X-ray diffraction. Owing to the filled coordination sphere of the octahedral cobalt centers, the (acacCN)Co(dpm-py)(2) compounds crystallize as isolated molecules. Upon reaction with silver salts, these complexes form crystalline heterometallic architectures with different organization and dimensionality, depending on the nature of the metal center and the position of the nitrogen atom in the pyridyl group. The two copper complexes lead to the formation of trinuclear species, {[(acacCN)Cu(dpm-py)](2)Ag}(+), resulting from coordination of the pyridyl groups to the silver cations. However, while meta-functionalized complexes self-assemble into an extended architecture via weak interaction of the peripheral nitrile of the acacCN ligand to the Ag(+) cation, this interaction is not present in the para-functionalized analogue. In both networks based on the Ag(BF(4)) salt, coordination of the tetrafluoroborate anion to the silver center in the rather rare chelate mode is observed. Upon assembly of the cobalt metallatectons with silver salts, two-dimensional (2D) coordination polymers are obtained in crystalline form, resulting, however, from different sets of interactions. Indeed, no coordination of the peripheral nitrile of the acacCN ligand is observed in the network incorporating the m-pyridyl-appended dpm; coordination of the pyridyl groups to the silver center and d(10)-d(10) interactions lead to a 2D architecture. In the case of the para analogue, a 2D honeycomb network is observed owing to coordination of the Ag(I) ion to two pyridyl nitrogen atoms and to one peripheral nitrile group of a acacCN ligand. This latter polymer represents a geometrical hybrid of the networks reported in the literature based on homoleptic Co(dpm-4py)(3) and Cr(acacCN)(3) complexes.     

Preparation, spectral and biological investigation of formaldehyde-based ligand containing piperazine moiety and its various polymer metal complexes

A novel tetradentate salicylic acid-formaldehyde ligand containing piperazine moiety (SFP) was synthesized by condensation of salicylic acid, formaldehyde and piperazine in presence of base catalyst, which was subjected for the preparation of coordination polymers with metal ions like manganese(II), cobalt(II), copper(II), nickel(II) and zinc(II). All the synthesized polymeric compounds were characterized by elemental analysis, IR, (1)H NMR and electronic spectral studies. The thermal stability was determined by thermogravimetric analysis and thermal data revealed that all the polymer metal complexes show good thermal stability than their parent ligand. Electronic spectral data and magnetic moment values revealed that polymer metal complexes of Mn(II), Co(II) and Ni(II) show an octahedral geometry while Cu(II) and Zn(II) show distorted octahedral and tetrahedral geometry respectively. The antimicrobial screening of the ligand and coordination polymers was done by using Agar well diffusion method against various bacteria and fungi. It was evident from the data that antibacterial and antifungal activity increased on chelation and all the polymer metal complexes show excellent antimicrobial activity than their parent ligand.     

Dynamic formation of coordination polymers versus tetragonal prisms and unexpected magnetic superexchange coupling mediated by encapsulated anions in the cobalt(II) 1,3-bis(pyrid-4-ylthio)propan-2-one series

The reactions of cobalt(II) halides and flexible ligand L [L=1,3-bis(pyrid-4-ylthio)propan-2-one] under different conditions generated a series of complexes with various structural motifs ranging from tetragonal-prismatic cages to 1-3D coordination polymers. The layer diffusion of cobalt(II) chloride and L in methanol/acetone at 25 degrees C gave rise to a 3D polymer, [Co(L)2Cl2].Me2CO. At 30 degrees C, the slow diffusion of diethyl ether into the blue dimethylformamide (DMF) solution of complex 1 afforded a 1D polymer, Co(L)Cl2(DMF)2. However, at 10 degrees C, the diffusion of diethyl ether into the DMF solution of complex 1 produced a tetragonal-prismatic cage, [Co2(L)4Cl2]Cl2.Et2O.DMF.2MeOH.4H2O. The reaction of cobalt(II) bromide and L in DMF at 10 degrees C yielded a dimer, [Co2(L)4Br2]Br2.6DMF.2H2O, with a cage structure similar to. The preparation of the series of compounds indicates the subtle relationship between structures and tunable reaction conditions. It is also found that the structural motifs vary according to the ligand conformations and that the formation of tetragonal-prismatic cages and may be templated by anionic guests. Magnetic studies on complexes in a temperature range 4-300 K disclose that L is unfavorable for a long-range magnetic interaction; however, intramolecular spin-coupling constants of -19.6 and -21.5 cm-1 for and indicate rather strong magnetic superexchanges arising from the overlap of the dz2 orbitals of the cobalt(II) and pz orbitals of the encapsulated halide anions. Electron paramagnetic resonance (EPR) spectra of complexes 3 and 4 in solution and solid give information that both complexes are high-spin cobalt(II) compounds with a rhombic distortion of the axial zero-field splitting. Interestingly, the intramolecular magnetic-exchange coupling in 3 and 4 mediated by the encapsulated anion Cl- or Br- is also reflected by the EPR spectra.     

Coordination chemistry of silanedithiolato ligands derived from cyclotrisilathiane: synthesis and structures of complexes of iron(II), cobalt(II), palladium(II), copper(I), and silver(I)

The coordination chemistry of chelating silanedithiolato ligands has been investigated on Fe(II), Co(II), Pd(II), Cu(I), and Ag(I). Treatment of M(OAc)(2) (M = Fe, Co, Pd) with cyclotrisilathiane (SSiMe(2))(3) in the presence of Lewis bases resulted in formation of Fe(S(2)SiMe(2))(PMDETA) (1), Fe(S(2)SiMe(2))(Me(3)TACN) (2), Co(S(2)SiMe(2))(PMDETA) (3), and Pd(S(2)SiMe(2))(PEt(3))(2) (4) (PMDETA = N,N,N',N',N' '-pentamethyldiethylenetriamine; Me(3)TACN = 1,4,7-trimethyl-1,4,7-triazacyclononane). The analogous reactions of M(OAc) (M = Cu, Ag) in the presence of PEt(3) gave rise to the dinuclear complexes M(2)[(SSiMe(2))(2)S](PEt(3))(3) [M = Cu (5), Ag (6)]. Complexes were characterized in solution by (1)H, (31)P[(1)H], and (29)Si[(1)H] NMR and in the solid state by single-crystal X-ray diffraction. Mononuclear complexes 1-3 have a four-membered MS(2)Si ring, and these five-coordinate complexes adopt trigonal-bipyramidal (for the PMDETA adducts) or square-pyramidal (for the Me(3)TACN adduct) geometries. In dimer 6, the (SSiMe(2))(2)S(2)(-) silanedithiolato ligand bridges two metal centers, one of which is three-coordinate and the other four-coordinate. The chelating effect of silanedithiolato ligands leads to an increase in the stability of silylated thiolato complexes.     

Living radical polymerization of acrylates mediated by 1,3-bis(2-pyridylimino)isoindolatocobalt(II) complexes: monitoring the chain growth at the metal

A new type of mediator for cobalt(II)-mediated radical polymerization is reported which is based on 1,3-bis(2-pyridylimino)isoindolate (bpi) as ancillary ligand. The modular synthesis of the bis(pyridylimino)isoindoles (bpiH) employed in this work is based on the condensation of 2-aminopyridines with phthalodinitriles. Reaction of the bpiH protio-ligands with a twofold excess of cobalt(II) acetate or cobalt(II) acetylacetonate in methanol gave [Co(bpi)(OAc)], which crystallize as coordination polymers, and a series of [Co(acac)(bpi)(MeOH)], which are mononuclear octahedral complexes. Upon heating the [Co(acac)(bpi)(MeOH)] compounds to 100 degrees C under high vacuum, the coordinated methanol was removed to give the five-coordinate complexes [Co(acac)(bpi)]. The polymerization of methyl acrylate at 60 degrees C was investigated by using one molar equivalent of the relatively short-lived radical source 2,2'-azobis(4-methoxy-2,4-dimethylvaleronitrile) (V-70) as initiator (monomer/catalyst/V-70: 600:1:1). The low solubility of the acetato complexes inhibits their significant activity as mediators in this reaction, whereas the acetylacetonate complexes control the radical polymerization of methyl acrylate more effectively. The radical polymerizations of the hexacoordinate complexes did not show a linear increase in number-average molecular weight (M(n)) with conversion; however, the polydispersities were relatively low (PDI=1.12-1.40). By using the pentacoordinate complexes [Co(acac)(bpi)] as mediators, a linear increase in M(n) values with conversion, which were very close to the theoretical values for living systems, and very low polydispersities (PDI<1.13) were obtained. This was also achieved in the block copolymerization of methyl acrylate and n-butyl acrylate. The intermediates with the growing acrylate polymer radical ((.)PA) were identified by liquid injection field desorption/ionization mass spectrometry as following the general formula [Co(acac)(4-methoxy-bpi)-(MA)(n)-R] (MA: methyl acrylate; R: C(CH(3))(CH(2)C(CH(3))(2)OCH(3))CN), a notion also confirmed by NMR end-group analysis.     

Self-Assembled Multivalent Ag-SR Coordination Polymers with Phosphatase-Like Activity

We show herein the phosphatase-like catalytic activity of coordination polymers obtained after adding Ag⁺-ions to thiols bearing hydrophobic alkyl chains terminated with a 1,4,7-triazacyclononane (TACN) group. The subsequent addition of Zn²⁺ -ions to the self-assembled polymers resulted in the formation of multivalent metal coordination polymers capable of catalysing the transphosphorylation of an RNA-model compound (2-hydroxypropyl-4-nitrophenyl phosphate, HPNPP) with high reactivity. Analysis of a series of metal ions showed that the highest catalytic activity was obtained when Ag⁺-ions were used as the first metal ions to construct the backbone of the coordination polymer through interaction with the -SH group followed by Zn²⁺-ions as the second metal ions complexed by the TACN-macrocycle. Furthermore, it was demonstrated that the catalytic activity could be modulated by changing the length of the hydrophobic alkyl chain.     

The preparation of non-extractable methylphenylpolysiloxane stationary phases for capillary column gas chromatography

Summary The synthesis of methylphenylpolysiloxane polymers and their use in the preparation of crosslinked, non-extractable stationary phases for fused-silica capillary columns are described. By preparing more viscous phenyl-containing polymers than are commercially available, stationary phase films of these polymers could be efficiently coated on fused-silica capillary columns and stabilized by a free radical crosslinking mechanism using peroxides. Four methylphenylpolysiloxane polymers containing different phenyl concentrations were prepared. These included three polymers containing 50% phenyl and one polymer containing 70% phenyl. Two of the 50% phenyl polymers had one phenyl and one methyl group attached to each silicon atom. One of these also had 1% vinyl incorporated. The third 50% phenyl polymer was synthesized in such a way that one half of the silicon atoms had two phenyl groups attached while the rest contained dimethyl groups. The 70% phenyl polymer also had 4% vinyl incorporated. Due to the intrinsic thermal stability of these phenyl phases and the enhanced film stability achieved by crosslinking, the 70% phenyl phase could be utilized up to 400 °C. Using the methods described in this paper, highly efficient and thermally stable fused silica capillary columns coated with crosslinked methylphenylpolysiloxane stationary phases can be successfully prepared.     

Separation of polystyrenes by means of open tubular capillary chromatography

Simulating polymer separation in flow-through channels of monolithic columns, separation of a mixture of polystyrene standards was investigated using open tubular capillary column of 2 μm inner diameter. High column efficiency was observed for polymers of molar mass ranged from few tens to few hundred kDas. Column efficiency significantly decreased for polymers with molar mass larger than 500 kDa nevertheless preserving value of few tens of thousands theoretical plates. Calibration curve observed for open capillary column is rather steep and can be well described by simple equation without quadratic term. In spite of low selectivity, capillary columns were able in separating wide range of polystyrene standards due to column high efficiency and in such a way supported an idea of hydrodynamic mechanism of polymer separation in flow-through channel of monolithic packings.     

系列Co-aip聚物的合成、结构及表面光电性能

采用水热法合成了3种以5-氨基间苯二甲酸根为桥连配体的Co(Ⅱ)配聚物:[Co2(aip)2(bipy)]n·2nH2O(1),[Co(aip)(imH)]n(2)和[Co(aip)(phen)]n(3)(H2aip=5-氨基间苯二甲酸,bipy=2,2′-联吡啶,imH=咪唑,phen=1,10-邻菲啰啉).通过X射...     

Synthesis and crystal structure of a rare square-planar Co(II) complex of a hydroxyamidinate ligand

Novel hydroxyamidinate complexes of cobalt(II) are presented, together with their electrochemical and spectroscopic properties. An unusual d(7) square-planar coordination around the cobalt(II) center exists and was confirmed by chemical oxidation to its Co(III) species. The Co(II) complex is difficult to reduce, but its facile oxidation suggests that it may be useful as an electron donor in photoredox reactions.     

Cd(2+) Complexation with P(CH(2)OH)(3), OP(CH(2)OH)(3), and (HOCH(2))(2)PO(2)(-): Coordination in Solution and Coordination Polymers

The coordination of Cd(2+) with P(CH(2)OH)(3) (THP) in methanol was followed by (31)P and (111)Cd NMR techniques. A cadmium-to-phosphine coordination ratio of 1:3 has been established, and effective kinetic parameters have been calculated. Air oxidation of THP in the presence of CdCl(2) at room temperature produces coordination polymer (3)(∞)[Cd(3)Cl(6)(OP(CH(2)OH)(3))(2)] (1). The same oxidation reaction at 70 °C gives another coordination polymer, (∞)[CdCl(2)(OP(CH(2)OH)(3))] (2). Complexes 1 and 2 are the first structurally characterized complexes featuring OP(CH(2)OH)(3) as a ligand that acts as a linker between Cd atoms. The addition of NaBPh(4) to the reaction mixture gives coordination polymer (∞)[Na(2)CdCl(2)(O(2)P(CH(2)OH)(2))(2)(H(2)O)(3)] (3) with (HOCH(2))(2)PO(2)(-) as the ligand. Coordination polymers 1-3 have been characterized by X-ray analysis, elemental analysis, and IR spectroscopy.     

Hydrogen-bond-directing effect in the ionothermal synthesis of metal coordination polymers

Four new cobalt coordination polymers, (EMIm)[Co2(TMA-H)2(44bpy)3]Br 1, (EMIm)[Co(TMA-H)(44bpy)2](44bpy)Br 2, (EMIm)[Co(TMA)(Im-H)]3 and (EMIm)2[Co(TMA)2(TED-H2)] 4, were prepared from 1-ethyl-3-methyl imidazolium bromide (EMIm-Br). All the compounds have similar two-dimensional cobalt trimesate (TMA) coordination layers but different three-dimensional supramolecular architectures that contain one of three potentially ditopic amines, 4,4'-bipyridine (44bpy), imidazole (Im-H) and triethylenediamine (TED). Two-fold interpenetration of hydrogen-bonding networks was found for 1, 2 and 4. The coordination layers of 1 and 2 are neutral while 3 and 4 have anionic molecular assemblies. The use of organic amines, that act as supramolecular bridging ligands, introduces hydrogen-bond-directing effects in the ionothermal synthesis of metal coordination polymers. Hydrogen bonding helps to align the packing between the coordination layers and control the formation of 3D supramolecular networks. In 1, hydrogen bonds between the ionic species within the channels direct the alignment of non-directional electrostatic interactions between EMIm+ and Br(-) ions, which is a rare case of a hydrogen-bond-templating effect of ionic liquids in ionothermal synthesis.     

Formation of the second superhydrophobic shell around an encapsulated metal ion: synthesis, X-ray structure and electrochemical study of the clathrochelate and bis-clathrochelate iron(II) and cobalt(II, III) dioximates with ribbed perfluoroarylsulfide substituents

The nucleophilic substitution of six chlorine atoms of the n-butylboron-capped clathrochelate iron and cobalt(II) precursors with perfluoroarylthiolate anions afforded the hexaperfluoroarylsulfide macrobicyclic iron and cobalt(II) tris-dioximates. The complexes obtained are soluble in aromatic and aliphatic hydrocarbons as well as in polar aprotonic solvents due to the presence of the superhydrophobic fluorine-containing molecular periphery. As it follows from the X-ray data for five iron and cobalt mono- and bis-clathrochelates, the geometry of their macrobicyclic frameworks is affected by both the nature of an encapsulated metal ion and that of the ribbed substituents. Bis-capping fragment Co(II)O(6) of the Co(III)Co(II)Co(III) bis-clathrochelate possesses a trigonal antiprismatic geometry, all the Co(II)N(6) coordination polyhedra are trigonal-prismatic, and those of the encapsulated iron(II) and cobalt(III) ions are intermediate between them. The wide range of Co-N distances as well as the significant shifts of the encapsulated cobalt(II) ions from the centres of their N(6)-coordination polyhedra were explained by the Jahn-Teller distortion. The EPR and magnetometry data are also characteristic of the low-spin cobalt(II) complexes with this distortion. The parameters of the (57)Fe M?ssbauer spectra of the iron macrobicycles are characteristic of the low-spin iron(II) complexes. The cyclic voltammograms (CVs) for the complexes studied contain the one-electron oxidation and reduction waves assigned to metal-centered redox-processes. The Fe(2+/3+) and Co(2+/3+) oxidations are quasi-reversible or irreversible. The anionic clathrochelate species resulting from the reversible Co(2+/+) reductions are stable on the CV time scale, whereas their iron(I)-containing analogs are unstable.     

Effect of organic bicarboxylates on the structures of cobalt(II) coordination polymers derived from a semi-rigid bis(benzimidazole) derivative

Two new Co(II) coordination polymers, [Co(L)(glu)] (1) and [Co(L)(npht)]·H₂O (2) (H₂glu = glutaric acid, H₂npht = 3-nitrophthalic acid, L = 1,4-bis(5,6-dimethylbenzimidazol-1-ylmethyl)benzene), have been hydrothermally synthesized by self-assembly of cobalt chloride with a semi-rigid bis(benzimidazole) derivative and different organic bicarboxylic acids. Single crystal X-ray diffraction analysis reveals that complex 1 is a one-dimensional tube-like coordination polymer containing one helical [Co-L] and two linear [Co-glu] chains. In complex 2, two npht ligands connect two Co(II) atoms to form a binuclear [Co(npht)]₂ subunit, which is further linked by L ligands with two kinds of conformations to form a 3-D CdSO₄-like framework. In addition, the electrochemical behaviors of the title complexes in bulk-modified carbon paste electrodes, and their thermal stabilities and fluorescent properties were investigated in this paper.     

From Dinuclear to Mononuclear：Co（Ⅱ） Complexes with Pyridine-2,6-Dicarboxylic Acid（H_2PDA）

Reactions of pyridine-2,6-dicarboxylic acid(H2PDA) with cobalt(Ⅱ) acetate resul-ted in two cobalt(Ⅱ) complexes,[Co(HPDA)2].2H2O.0.5CH3OH(1) and [Co2(PDA)2(H2O)5].2H2O(2),which were characterized by single-crystal X-ray diffraction,IR and electronic absorption spectra.For both complexes,every cobalt atom lies in peudo-octahedral coordination geometry,and the whole structures present 3D frameworks linked by π-π stacking interactions and extensive hydrogen bonds.Magnetic studies showed λ =-83.38 cm-1 for(1) and g = 2.50 and J =-1.38 cm-1 for(2).     

双金属层状配位聚合物{[ML][FeⅡFeⅡ(Ox)3]·H2O}∞的合成和波谱表征

合成和表征了两种新的Schiff碱配合物[ZnL(ClO4)@4H2O(A)和CdL(ClO4)@3H2O(B)],其中L=2-{[2-(Aminomethyl-amino)-ethylimino]-methyl}-phenol.A(或B)、FeSO4@7H2O和K3[Fe(ox)3]@3H2O进一步反应,生成了配位聚合物{[ML][FeⅡFeⅢ(ox)3]@H2O}∞,其中M=Zn2+(C)或Cd2+(D).红外光谱和Mossbauer谱测定结果表明,C和D具有二维层状结构,其阴离子层由[FeⅡFeⅢ(ox)3]-单元构成.     

Azo dye oxidation with hydrogen peroxide catalysed by manganese 1,4,7-triazacyclononane complexes in aqueous solution

A kinetic and mechanistic study is reported of the oxidation of a number of azonaphthol dyes with hydrogen peroxide in aqueous solution, catalysed by some mono and dinuclear manganese(IV) complexes of 1,4,7-trimethyl-1,4,7-triazacyclononane (Me3TACN). The results of UV-Vis investigations, augmented by EPR and ESI-MS studies, are described for a series of experiments in which concentrations, pH and ionic strength have been varied. The reactions are characterised by an induction period followed by a relatively rapid oxidation. For the dinuclear manganese complex 2, these are consistent with an initial perhydrolysis of the manganese complex involving both the dye anion and HO2-, to give mononuclear manganese species and the operation of a catalytic cycle incorporating MnIIIL(OH)3, O = MnVL(OH)2 and MnIVL(OH)3 (L = Me3TACN) (cf. the reactions of peroxidase enzymes). ESI-MS results provide evidence for the formation and reaction (with the dye) of MnIVL(OH)3. With the mononuclear manganese complex MnIVL(OMe)3, there is a short lag-phase attributed to perhydrolysis by HO2- followed by the same catalytic cycle.     

Synthesis of Some Polymer‐Metal Complexes and Elucidation of their Structures

In this study, the nine coordination polymers of Fe(III), Co(II) and Ni(II) salts have been synthesized using polyacrylamide (PAA), polt(ethylene glycol) (PEG) and poly(vinyl alcohol) (PVA) and their structures were characterized by magnetic and conductivity measurements, ultraviolet‐visible (UV‐VIS), FTIR spectroscopy and thermogravimetric analysis (TGA). The structures of Fe(III) complexes in the all coordination polymers were found as tetrahedral. The structures of PAA‐Co(II) coordination polymer was determined as octahedral geometry whereas PEG‐Co(II) and PVA‐Co(II) complexes showed as tetrahedral structure. PAA‐Ni(II) and PEG‐Ni(II) complexes have octahedral geometry, whereas PVA‐Ni(II) has a square planar structure. Besides, the stress‐strain experiments of PVA‐metal coordination polymers obtained rubber‐like structure were carried out and the value of breaking‐strain of PVA‐Ni(II) complex was found to be about 17% of vulcanized natural rubber. The conductivities of the resulting polymer‐metal complexes were measured by four‐probe technique and were found in the range 10^?5?10^?6 Scm^?1. Thus, it was suggested that they can be used in the field potential application of conducting polymers. TGA results revealed that among the complexes PEG‐Fe(III) and PVA‐Fe(III) complexes have the highest thermally stable.