Diffusion coefficients of 2-fluoroanisole, 2-bromoanisole, allylbenzene and 1,3-divinylbenzene at infinite dilution in supercritical carbon dioxide

The Taylor–Aris chromatographic technique was employed for the determination of diffusion coefficients of 2-fluoroanisole, 2-bromoanisole, allylbenzene and 1,3-divinylbenzene at infinite dilution in supercritical carbon dioxide from 313.16 to 333.16 K and pressures between 15 and 35 MPa. As expected, the diffusivities rise when temperature increases and pressure decreases. Numerous predictive equations are compared with experimental data: Lai–Tan, Liu–Ruckenstein cluster formula, Woerlee, Hippler–Schubert–Troe, Catchpole–King, Eaton–Akgerman, He, He–Yu, Liu–Silva–Macedo, Funazukuri and coworkers, Dariva–Coelho–Oliveira, Zhu–Lu–Zhou–Wang–Shi and the Liu–Ruckenstein RHS formula. The equations of He, He–Yu and Catchpole–King are the best of all, but cannot be used in the whole range of temperatures and solvent densities.     

Phasen mit Diamant-Unterstruktur in ternären Beryllium-Legierungen

Zusammenfassung In den Systemen Be–Cu–Mg, Be–Cu–Al, Be–Cu–Si, Be–Cu–Zn, Be–Cu–Ge, Be–Cu–In wurden ternäreLaves-phasen mit dem kubischen Cu₂Mg-Strukturtyp gefunden. Der Dreistoff Be–Co–Si zeigt eine ternäre Phase mit Cl- oder B32-Typ.

---

In the systems Be–Cu–Mg, Be–Cu–Al, Be–Cu–Si, Be–Cu–Zn, Be–Cu–Ge, Be–Cu–In ternaryLaves phases with the cubic Cu₂Mg structure are found. The ternary system Be–Co–Si shows a ternary phase with the C1 or B32 type.

     

Neutron activation analysis of asbestos from Canada

Concentrations of Al, Au, Br, Ce, Cl, Co, Cr, Fe, K, La, Mg, Mn, Na, Ni, Sb, Sc, Sm, Srm and V were determined in 6 samples of asbestos from Canada. They were equal to (in ppm): Al 1660–3430; Au 0.03–0.04; Br 3.1–11.7; Ce 1.7–4.8; Cl 116–331; Co 35–83; Cr 200–2060; Fe 29300–42200; K 125–867; La 0.28–1.03; Mg 24–25.9%; Mn 418–545; Na 364–1610; Sb 0.65–1.46; Sc 3.73–5.57; Sm 0.09–0.3; Sr 26.7–41.4; V 8.4–14.3. Five toxic elements were found in asbestos; Cr, Mn, Ni, Sb and V.     

ZnO nanorods decorated calcined Mg–Al layered double hydroxides as photocatalysts with a high adsorptive capacity

The nanocomposites of magnesium–aluminium–carbonate–layered double hydroxides (Mg–Al–CO₃–LDHs) and ZnO nanorods were prepared via a homogeneous precipitation process. The presence of ZnO nanorods made the calcined Mg–Al–CO₃–LDHs, the strong adsorptive adsorbents for anions, have a photocatalytic activity. Both Mg–Al–CO₃–LDHs and the nanocomposites with various ZnO/Mg–Al–CO₃–LDHs mass ratios from 0.5:1 to 3:1 were characterized by X-ray diffraction, transmission electron microscope and UV–vis diffuse reflectance spectra. The nanocomposites quickly adsorbed the anionic dyes such as acid red G (ARG) without the light illumination, and the adsorbed dyes on the recovered nanocomposites were then degraded in a separated photocatalytic reactor. The adsorption ability of the nanocomposites and their photocatalytic activities for the removal of ARG were evaluated by the Fourier transform infrared spectra and UV–vis extinction spectra. The sample at 3:1 ZnO/Mg–Al–CO₃–LDHs mass ratio was shown to have higher photocatalytic efficiencies.     

Microdistributions of Electrolytic Alloys and Their Components

Microdistributions of Cu–Ni and Cu–Co alloys electrodeposited from pyrophosphate; Ni–Cu, from sulfate–chloride and pyrophosphate–ammonium; Cu–Zn, from pyrophosphate and cyanide; Cu–Cd, from sulfate and pyrophosphate; and Ni–Cd, Ni–Co–Cd, and Zn–Cd, from sulfate, sulfate–chloride, pyrophosphate, chloride–ammonium, and acetate electrolytes are studied. The coatings' microprofile depends on the kinetics of reduction of each component and mutual influence of electrochemical processes at the cathode. Copper accelerates and cadmium inhibits the reduction of the second component of alloys, no matter the electrolyte type, reduction kinetics, and metal nature. In antileveling conditions, the diffusion-controlled Cu reduction accelerates the reduction of the second component of alloys and ensures deposition of coatings whose microprofiles are more uniform than expected from diffusion limitations only. Depolarizing action of Cu during the Cu–Zn deposition from a cyanide electrolyte can completely neutralize differences in the rates of supply of reduced metal ions; hence a constant chemical composition of the coating over its microprofile. Inhibiting action of the diffusion-controlled Cd deposition provides for leveling properties of electrolytes from which Ni–Cd, Ni–Co–Cd, and Zn–Cd alloys are deposited; the chemical composition of these deposits is nonuniform over their microprofiles.     

Characterization of low-molecular weight peptides in champagne wine by liquid chromatography/tandem mass spectrometry

This paper reports the use of an on-line LC–ESI–MS/MS method for the identification and quantification of di- and tripeptides in champagne wine without laborious sample pretreatment. The identification of these compounds, in their underivatised form, is based on identical retention times and ESI–MS spectra to those of reference standards. The presence of nine dipeptides (Arg–Ile, Ile–Arg, Ile–Val, Lys–Phe, Lys–Tyr, Phe–Lys, Tyr–Gln, Tyr–Lys, Val–Ile) and the absence of two tripeptides (Phe–Arg–Arg and Lys–Met–Asn) have been evidenced in the matrix. Calibration curves for each analyte were established using Phe–Arg as internal standard. The calibration curves were linear in the concentration range 0.1–10 mg L⁻¹ with a determination coefficient, r², better than 0.992. The accuracy for the calibration standard was estimated at between 92 and 102%. This method allows high recovery and satisfies the necessary requirements with respect to accuracy, repeatability and sensitivity. The first application of this analytical method to the measurement of di- and tri-peptides in different vintages of champagne wine is reported. Compositional changes in the peptides occurred depending on the vintage.     

Concentration of Cr,Fe, Co and Zn in some Nigerian food grains

Elemental analysis of some Nigerian grains for cobalt, zinc, iron, and chromium, was done by thermal NAA. The concentration of these essential trace elements were found as follows: rice /0.18–0.98 ppm Cr, 27–307 ppm Fe, 0.133–0.237 ppm Co, 12.4–17.8 ppm Zn/; soyabean /0.32–0.59 ppm Cr, 67–81 ppm Fe, 0.244–0.358 ppm Co, 42–45 ppm Zn/; maize /0.05–0.75 ppm Cr, 22.7–47.6 ppm Fe, 0.20–0.65 ppm Co, 15.8–33.4 ppm Zn/; ground-nut /0.22–2.02 ppm Cr, 27.2–34.8 ppm Fe, 0.08–1.73 ppm Co, 24.3–38.2 ppm Zn/. No pattern was established for the elemental concentration in the grain samples. The result obtained suggest that an average diet of these grains will provide an adequate concentration of these essential elements.     

Hochschmelzende Systeme mit Hafniumkarbid und -nitrid

Zusammenfassung Auf Grund röntgenographischer Untersuchungen bilden die Systeme: HfN–TiN, –ZrN, –TiC, –ZrC, –HfC, –NbC, –TaC sowie HfC–TiN, –ZrN, –NbN lückenlose Mischreihen. VN und TaN lösen sich in großen mengen in HfN. Ebenso nimmt HfC sehr viel TaN in fester Lösung auf. Die homogenen Bereiche von ZrC_1–x und HfC_1–x werden ermittelt.Mit 7 Abbildungen     

Oxidation at a sol-gel composite electrode doped with a dirhodium-substituted polyoxometalate for amperometric detection of peptides separated by HPLC

Oxidation of a variety of compounds, including methionine (Met), using a complex formed between dirhodium(II) acetate and the lacunary form of phosphotungstic acid as the catalyst is effective over a wide range of conditions, including pH 2–10. Thus, amperometric detection at a composite in which this complex is immobilized in a sol–gel material does not place restrictions on selection of conditions for separations by reverse-phase HPLC. A demonstration of this point is shown by a study of Met, Met–Phe, Phe–Met, Met–Met, and Gly–Met–Gly (Phe, phenylalanine; Gly, glycine). Using a 0.05 M phosphate buffer at pH 6.7, a C18 column, and a flow rate of 1 ml min⁻¹, capacity factors for Met, Gly–Met–Gly, Met–Met, and Phe–Met were 1.4, 2.1, 5.6, and 34, respectively. Phe–Met and Met–Phe co-eluted.     

Synthesis,electrochemical and magnetic properties of new macrocyclic copper(II) complexes derived from 2,6-diacetyl-4-4-methylphenol

A series of binuclear macrocyclic copper(II) complexes [Cu2Lm,n](ClO4)2·xH2O have been prepared in which the two copper(II) ions are placed in two geometrically distinct co-ordination environments. The macrocycles with two 2,6-bis(iminomethyl)-4-methylphenol entities combined through two different lateral chains, –(–CH2–)–m and –(–CH2–)–n (m = 2 or 3, n = 2 to 5) were synthesized by stepwise cyclization. Cyclic voltammetry shows the presence of two reduction couples: CuIICuII CuICuII and CuIICuI CuICuI. The comproportionation constants, Kcom, for the mixed valence CuICuII complexes have been determined electrochemically. The Kcom value increases in the order of the macrocycles: (L2,2)^2–<(L2,3)^2–<(L2,4)^2–<(L2,5)^2– and (L3,3)^2–<(L3,4)^2–<(L3,5)^2–. Cryomagnetic investigations (80–300K) reveal a moderately strong antiferromagnetic spin exchange between the copper(II) ions within each complex (J = –210 to –390 cm–1).     

Importance of bulk properties in the structure and evolution of cleavage surfaces of quasicrystals

The present work reviews the recent achievements in probing bulk properties of quasicrystals by using cleavage surfaces and surface sensitive techniques. In particular, it is shown that the cluster–subcluster-based structure of the cleavage surface of icosahedral Al–Pd–Mn quasicrystals can be related to the presence of stable atom clusters in the bulk, which force the crack front to circumvent them. Furthermore, by subjecting cleavage surfaces of differently pre-annealed Al–Pd–Mn quasicrystals to a post-cleavage heat treatment, we demonstrate that bulk vacancies migrate toward the surface, where they initiate structure and composition changes. These studies allow us to characterize Al–Pd–Mn quasicrystals with respect to their bulk vacancy concentration. As-grown Al–Pd–Mn quasicrystals are found to contain a supersaturation of all chemical species of vacancies in near stoichiometric composition, whereas long term pre-annealed material has a much lower, and predominantly Al, vacancy concentration. Analogous experiments for decagonal Al–Ni–Co quasicrystals show that as-grown Al–Ni–Co has a lower vacancy concentration than as-grown Al–Pd–Mn.     

DFT studies on tautomerism of C5-substituted 1,2,4-triazoles

DFT (B3LYP/6-311++G**, B3PW91/6-311++G**) Gibbs free energy and single point CCSD(T)/6-311++G**//DFT total energy calculations were performed to investigate stability and tautomerism of C5-substituted 1,2,4-triazoles. Three different tautomers are possible for the substituted 1,2,4-triazoles: N1–H, N2–H, and N4–H. Unlike for the 1,2,3-triazoles, where the most stable is the N2–H tautomer regardless of substituent applied, for the 1,2,4-triazoles, the electron donating substituents (–OH, –F, –CN, –NH₂, and –Cl) and the C5-cation stablize the N2–H tautomer, whereas the electron withdrawing substituents (–CONH₂, –COOH, –CHO, –BH₂, and –CFO) and the C5-anion stablize the N1–H tautomer. Except for the C5-anion and C5-cation, the N4–H form is the least stable tautomer. The relative stability of the C5-substituted 1,2,4-triazole tautomers is strongly influenced by attractive and/or repulsive intramolecular interactions between substituent and electron donor or electron acceptor centres of the triazole ring.     

Solvent extraction and separation of some lanthanides and americium by extraction chromatography in the system Aliquat-336 — LiNO3 and HNO3

Summary The liquid-liquid extraction of Nd, Eu, Ho, and Am nitrates by means of the radiotracer method in the system tri-caprylmonomethyl ammonium nitrate /Aliquat-336/ — lithium nitrate and nitric acid was investigated.The mixture of tracer quantities of Eu–Am, Nd–Pr, Sm–Pm, Gd–Eu, Er–Ho, Tm–Er, Yb–Tm, and Lu–Tm were separated by column partition chromatography.

---

Lösungsmittelextraktion und Trennung einiger Lanthanide und Americium durch Extraktions-chromatographie im System Aliquat-336 — LiNO₃ und HNO₃

Zusammenfassung Es wurde die Flüssig-Flüssig-Extraktion von Nd-, Eu-, Ho- und Am-Nitraten mit Hilfe radioaktiver Markierung im System Tri-caprylmonomethyl-ammoniumnitrat-/Aliquat-336/-Lithiumnitrat und Salpetersäure untersucht.Die Markierungsgemische von Eu–Am, Nd–Pr, Sm–Pm, Gd–Eu, Er–Ho, Tm–Er, Yb–Tm und Lu–Tm wurden durch Säulen-Verteilungs-Chromatographie getrennt.

---

Extraction par solvant et separation de quelques lanthanides et d'americium par chromatographie d'éxtraction dans le système «Aliquat-336, LiNO₃, HNO₃»

Sommaire On a étudié, au moyen de la méthode des radiotraceurs, l'éxtraction liquide-liquide de nitrates de Nd, Eu, Ho et Am dans le système «nitrate de tri-caprylmonométhyl ammonium [Aliquat-336], nitrate de lithium, acide nitrique».Les mélanges de Eu–Am, Nd–Pr, Sm–Pm, Gd–Eu, Er–Ho, Tm–Er, Yb–Tm et Lu–Tm à la dose des traceurs radioactifs, ont été résolus en leurs composants chromatographie de partage sur colonne.

     

Multielement measurements in Mexican cigarette tobacco

The concentration of 21 elements in cigarette tobacco in nine different brands manufactured and commercially available in Mexico has been determined using neutron activation analysis. The concentration range of the measured elements (in g g^–1) were: As, (four brands) <0.55–3.24; Ba, 64–251; Br, (four brands) 49–136; Ce, <0.3–1.7; Co, 0.29–0.55; Cr, <0.8–2.4; Cs, 0.091–0.40; Eu, <0.03; Fe, 420–680; Hf, <0.03–0.13; K, (four brands) 18300–40300; La, (four brands) <0.2–0.66; Na, (four brands) 309–566; Rb, 19–50; Sb, <0.7; Sc, 0.13–0.22; Se, <0.7; Sm, (four brands) 0.07–0.14; Sr, 227–472; Th, <0.1–0.17 and Zn, 14–56. The results are compared with the literature values for the concentration of the above elements in cigarette tobacco from other countries.     

A New Predictive Equation for the Surface Tensions of Aqueous Mixed Ionic Solutions Conforming to the Linear Isopiestic Relation

The linear isopiestic relation has been used, together with the fundamental Butler equations, to establish a new simple predictive equation for the surface tensions of the mixed ionic solutions. This newly proposed equation can provide the surface tensions of multicomponent solutions using only the data of the corresponding binary subsystems of equal water activity. No binary interaction parameters are required. The predictive capability of the equation has been tested by comparing with the experimental data of the surface tensions for the systems HCl–LiCl–H₂O, HCl–NaClO₄–H₂O, HCl–CaCl₂–H₂O, HCl–SrCl₂–H₂O, HCl–BaCl₂–H₂O, LiCl–NaCl–H₂O, LiCl–KCl–H₂O, NaCl–KCl–H₂O, KNO₃–NH₄NO₃–H₂O, and LiCl–NaCl–KCl–H₂O at 298.15 K; KNO₃–NH₄Cl–H₂O, KBr–Sr(NO₃)₂–H₂O, NaNO₃–Sr(NO₃)₂–H₂O, NaNO₃ –(NH₄)₂SO₄–H₂O, KNO₃–Sr(NO₃)₂– H₂O, NH₄Cl–Sr(NO₃)₂–H₂O, NH₄Cl– (NH₄)₂SO₄–H₂O, KBr–KCl–H₂O, KBr–KCl–NH₄Cl–H₂O, KBr–KNO₃– Sr(NO₃)₂–H₂O, KBr–NH₄Cl–Sr(NO₃)₂–H₂O, KNO₃–NH₄Cl–Sr(NO₃)₂–H₂O, and NH₄Cl–(NH₄)₂SO₄–NaNO₃–H₂O at 291.15 K; and KBr–NaBr–H₂O at temperatures from 283.15 to 308.15 K. The agreement is generally quite good.     

Vibrational frequencies and structural determinations of tetraisocyanatogermane

The normal mode frequencies and corresponding vibrational assignments of Ge(NCO)₄ are examined theoretically using the 98 set of quantum chemistry codes. Each of the vibrational modes was assigned to one of six types of motion predicted by a group theoretical analysis (Ge–N stretch, N–C–O symmetric stretch, N–C–O asymmetric stretch, N–C–O bend, Ge–N–C bend, and N–Ge–N bend) utilizing the T_d symmetry of the molecule. Uniform scaling factors were derived for each type of motion. Predicted infrared and Raman intensities are reported.     

A molecular dynamics study of the pentacyclo-undecane cage amino acid tripeptide

In this paper, we report on the conformational profile of the pentacyclo-undecane (PCU) cage tripeptide carried out by molecular dynamics (MD) simulation using water as an explicit solvent. The MD solution phase studies carried on the model peptide analogues (A)=Ac–Ala–Ala–Ala–NHMe; (B)=Ac–Cage–Cage–Cage–NHMe; (C)=Ac–Ala–Cage–Ala–NHMe and (D)=Ac–Ala–Pro–Ala–NHMe, are used as a complimentary technique to the corresponding gas phase simulated annealing (SA) study previously carried out in our laboratory. No significant structural changes were observed over the MD trajectories. However, the results reported here provide further evidence that the (PCU) cage amino acid exhibits C_7eq, C_7aq, _R and _L conformations, and the theoretical results suggest that the PCU cage amino acid is a strong β-turn inducer. These results support the prediction that when the PCU cage residues are in the (i) and (i+2) positions, the β-turn can be extended in either direction to form anti-parallel β-pleated sheets, thereby forming the basis of the mechanism for the folding back of the chain in a cross-β-turn structure.     

Analysis of High-Purity Volatile Compounds

The current status of the analysis of high-purity volatile substances is considered. Two types of impurities in high-purity volatile substances were distinguished: molecularly dissolved substances and suspended particles. The main factors that restrict the limiting capabilities of analytical techniques were revealed. The attained detection limits were 10^–8–10^–10% for metal impurities, 10^–4–10^–8% for organic substances, 10^–5–10^–9% for water, and 10^–5–10^–7 for permanent gases. Suspended particles of 0.04–0.003 m in size were determined by light scattering.     

Neutron Activation Analysis of Bottom and Fly Oil Ash Leachates

Seven samples of oil fly and bottom ashes were leached with water using a Canadian standard test method for shake extraction of solid waste. The concentrations of 20 elements in the leachates were determined by the computerized systematic instrumental absolute neutron activation analysis. The ranges of concentrations (in ppm) found for the elements in the leachates were: Al (3–526), Ba (0.5–6), Ca (100–695), Cl (13–59), Co (1–6.3), Cr (0.2–6.6), Cs (0.03–0.4), Eu (0.003–0.01), Fe (28–690), K (42–464), La (0.3–49), Mg (214–3150), Mn (1.2–20), Na (88–4050), Sb (0.04–0.4), Sc (0.003–0.07), Sr (1.2–23), U (0.07–1), V (1.2–4540) and Zn (2.3–200). These findings were compared with the maximum concentrations allowed for these elements by Canadian regulations. The concentrations of Cr and U were found to be higher than their permissible limits on 7 occasions. The purpose of this study was to determine the background levels of different elements in oil ash leachates, in order to evaluate their potential impact on underground water.     

Crystal Chemistry of Rare-Earth Chalcogenides

Crystal structures of Ln–X, Ln–Ln'–X, Ln–M–X, and Ln–X–Z compounds (Ln and Ln' are rare-earth elements; M is subgroup I–VIIIa or II–Vb cation and Z is subgroup V–VIIb anion; X is S, Se, or Te) were systematized and analyzed using data obtained by us and data from the literature. The structures of binary Ln–X chalcogenides can be divided into 4 groups: derivatives of NaCl-type structures, structures with one small parameter b 4 Å, structures similar to those of oxides and pniktides, and derivatives of PbFCl-type structures. Triple Ln–Ln'–X chalcogenides have structures similar to those of the binary chalcogenides of the first, second, and third groups. It was shown that the crystal structure of Ln–M–X depends on the size of cation M, its formal charge, electronegativity value, and electronic structure. The crystal structures of the phases in the Ln–M–X and Ln–X–Z compounds were compared with binary chalcogenide structures. Different variants of structure characterization and their potentialities are considered. Special attention is given to the defect-containing and ordered structures and to elucidating the role of the cation and anion vacancies in the phase structures.