Low-voltage blue light emission from n-ZnO/p-GaN heterojunction formed by RF magnetron sputtering method

High quality n-ZnO/p-GaN heterojunction was fabricated by growing highly crystalline ZnO epitaxial films on commercial p-type GaN substrates via radio frequency (RF) magnetron sputtering. Low-voltage blue light emitting diode with a turn-on voltage of ∼2.5 V from the n-ZnO/p-GaN heterojunction was demonstrated. The diode gives a bright blue light emission located at ∼460 nm and a low threshold voltage of 2.7 V for emission. Based on the results of the photoluminescence (PL) and electroluminescence (EL) spectra, the origins of the EL emissions were studied in the light of energy band diagrams of ZnO–GaN heterojunction, and may attribute to the radiative recombination of the holes in p-GaN and the electrons injected from n-ZnO, which almost happened on the side of p-GaN layer. These results may have important implications for developing short wavelength optoelectronic devices.     

Effect of ambient temperature on electrical properties of nanostructure n-ZnO/p-Si heterojunction diode

The nanostructure n-ZnO/p-Si heterojunction diode was fabricated by sol–gel method. The structural and morphological properties of the nanostructure ZnO film have been investigated. The X-ray diffraction spectra indicated that the films are of polycrystalline nature. The scanning electron microscopy images indicate that the surface morphology of ZnO film is almost homogeneous and the ZnO film is consisted of the circular formed with coming together of the nanoparticles. The electrical characterization of nanostructure n-ZnO/p-Si heterojunction diode has been investigated by current–voltage characteristics. The ideality factor (n) of the diode was found for different ambient temperatures and the obtained 6.40 value for 296 K is higher than unity due to the interface states between the two semiconductor materials and series resistance. The values of n increased with decreasing ambient temperature. The reverse current of the diode increased with illumination intensity of 100 mW cm⁻² and the diode gave a maximum open circuit voltage V_oc of 0.19 V and short-circuits current I_sc of 8.03 × 10⁻⁸ A.     

Modified thermal evaporation process using GeO2 for growing ZnO structures

In the current work, zinc oxide (ZnO) nano/microstructures are synthesized using a modified thermal-evaporation process by introducing germanium oxide (GeO₂) powder mixed with metallic Zn powder as the raw material. Without the use of any catalyst and oxygen flow in the furnace system, GeO₂ is utilized to provide an oxygen source for the growth of ZnO structure. The samples are treated by different temperatures ranging from 500 to 900 °C. Morphology, phase structure, and photoluminescence properties are investigated by scanning electron microscopy (SEM), X-ray diffractometer (XRD) and photoluminescence (PL) spectrometer. The structures and morphologies of the samples were found to vary with growth temperature. The XRD diffraction peaks show that the films grown at temperature from 600 to 800 °C consist of hexagonal wurtzite ZnO structures. Room-temperature PL measurement revealed ZnO spectra representing two bands: near-band-edge emission in the ultraviolet (UV) region and broad deep-level emission centered at about 500 nm. The strong UV emission in the PL spectra indicates that the GeO₂ supplies sufficient oxygen for formation of ZnO structures with few oxygen vacancies. The growth mechanism and the roles of GeO₂ for formation of ZnO structures are discussed in detail.     

Structural and optical properties of ZnO thin films on (111) CaF2 substrates grown by magnetron sputtering

ZnO thin films were grown on (111) CaF₂ substrates by magnetron sputtering at room temperature. Structural and optical properties of the ZnO thin films were studied. XRD analysis showed that the ZnO thin films had the (002) preferential orientation. The transmittance of ZnO thin films was over 80% in the visible range. The optical band gap of the ZnO thin films was 3.26 eV. The optical constants (n,k)$(n,k)$ of the ZnO thin films in the wavelength range 300–1000 nm were obtained by infrared spectroscopic ellipsometry measurement. PL spectra of ZnO thin films showed strong UV near-band-edge emission peak at 376.5 nm and weak visible red emission at 643.49 nm using He–Cd laser as the light source, using a synchrotron radiation light source PL spectra showed three emission peak at 320 nm, 410 nm and 542 nm respectively.     

Structural and photoluminescence characteristics of ZnO films by room temperature sputtering and rapid thermal annealing process

ZnO thin films deposited on SiO₂/Si substrates at room temperature by sputtering technology were annealed with a rapid thermal annealing process at various temperatures from 200 °C to 900 °C. The physical and optical properties of the ZnO films were investigated by X-ray diffraction, scanning electron microscopy and room-temperature photoluminescence (PL). The surface structures of the thin films showed great variations with increased annealing temperature. The PL spectrum illustrated that a stronger UV emission intensity appeared at an annealing temperature of 500 °C. On the other hand, visible-light emission could be obtained when the ZnO films were annealed above 500 °C and reached a maximum intensity at 900 °C. The possible mechanisms for visible-light emission are discussed. PACS 81.15.Cd; 81.40.Ef; 78.55.-m; 78.55.Et     

Effect of annealing temperature and annealing atmosphere on the structure and optical properties of ZnO thin films on sapphire (0 0 0 1) substrates by magnetron sputtering

ZnO thin films were epitaxially grown on sapphire (0 0 0 1) substrates by radio frequency magnetron sputtering. ZnO thin films were then annealed at different temperatures in air and in various atmospheres at 800 °C, respectively. The effect of the annealing temperature and annealing atmosphere on the structure and optical properties of ZnO thin films are investigated by X-ray diffraction (XRD), atomic force microscopy (AFM), photoluminescence (PL). A strong (0 0 2) diffraction peak of all ZnO thin films shows a polycrystalline hexagonal wurtzite structure and high preferential c-axis orientation. XRD and AFM results reveal that the better structural quality, relatively smaller tensile stress, smooth, uniform of ZnO thin films were obtained when annealed at 800 °C in N₂. Room temperature PL spectrum can be divided into the UV emission and the Visible broad band emission. The UV emission can be attributed to the near band edge emission (NBE) and the Visible broad band emission can be ascribed to the deep level emissions (DLE). By analyzing our experimental results, we recommend that the deep-level emission correspond to oxygen vacancy (V_O) and interstitial oxygen (O_i). The biggest ratio of the PL intensity of UV emission to that of visible emission (I_NBE/I_DLE) is observed from ZnO thin films annealed at 800 °C in N₂. Therefore, we suggest that annealing temperature of 800 °C and annealing atmosphere of N₂ are the most suitable annealing conditions for obtaining high quality ZnO thin films with good luminescence performance.     

I–V characteristics of ZnO/Cu2O thin film n–i–p heterojunction

ZnO/Cu₂O thin film n–i–p heterojunctions were fabricated by magnetron sputtering. The microstructure, optical, and electrical properties of n-type (n‐) ZnO, insulating (i‐) ZnO, and p-type (p‐) Cu₂O films deposited on glass substrates were characterized by X-Ray diffraction (XRD), spectrophotometer, and the van der Pauw method, respectively. XRD results show that the mean grain size of i-ZnO film is much larger than that of n-ZnO film. The optical band gap energies of n-ZnO, i-ZnO, and p-Cu₂O film are 3.27, 3.47, and 2.00 eV, respectively. The carrier concentration of n-ZnO film is two orders of magnitude larger than that of p-Cu₂O film. The current–voltage (I–V) characteristics of ZnO/Cu₂O thin film n–i–p heterojunctions with different i-ZnO film thicknesses were investigated. Results show that ZnO/Cu₂O n–i–p heterojunctions have well-defined rectifying behavior. All ideality factors of these n–i–p heterojunctions are larger than 2.0. The forward bias threshold voltage and ideality factor increase when i-ZnO layer thickness increases from 100 to 200 nm. An energy band diagram was proposed to analyze the I–V characteristics of these n–i–p heterojunctions.     

Fabrication and electrical characterization of ZnO rod arrays/CuSCN heterojunctions

ZnO rod arrays/CuSCN heterojunctions are fabricated by depositing ZnO rod arrays films using two-step chemical bath deposition (CBD) and CuSCN thin films using successive ionic layer adsorption and reaction (SILAR) on ITO substrate successively. The structures and morphologies of ZnO films and CuSCN films, analyzed by X-ray diffraction (XRD) spectroscopy and metallurgical microscope, show that ZnO films are hexagonal wurtzite structure and consisted of vertical polycrystalline rods with diameter of 1 μm, CuSCN films are β-phase structure and consisted of elongated grains with length of 3 μm. Current–voltage (I–V) measurements of ZnO/CuSCN heterojunctions show good diode characteristics with rectification ratio about 48.3 at 3 V. The forward conduction is, respectively, determined by carrier recombination in the space charge region, defect-assisted tunneling and exponential distribution trap-assisted space charge limited current mechanism with the increase of forward voltage. Also, a band diagram of ZnO/CuSCN heterojunctions has been proposed to explain the transport mechanism.     

Pure UV photoluminescence from ZnO thin film by thermal retardation and using an amorphous SiO2 buffer layer

ZnO/SiO₂ thin films were fabricated on Si substrates by E-beam evaporation with thermal retardation. The as-prepared films were annealed for 2 h every 100 °C in the temperature range 400-800 °C under ambient air. The structural and optical properties were investigated by X-ray diffraction (XRD), atomic force microscopy (AFM) and photoluminescence (PL). The XRD analysis indicated that all ZnO thin films had a highly preferred orientation with the c-axis perpendicular to the substrate. From AFM images (AFM scan size is 1 μm×1 μm), the RMS roughnesses of the films were 3.82, 5.18, 3.65, 3.40 and 13.2 nm, respectively. PL measurements indicated that UV luminescence at only 374 nm was observed for all samples. The optical quality of the ZnO film was increased by thermal retardation and by using an amorphous SiO₂ buffer layer.     

Fabrication and characterization of magnetron sputtered arsenic doped p-type ZnO epitaxial thin films

Arsenic doped p-type ZnO thin films were grown on sapphire substrate by magnetron sputtering. As grown films reveal p-type conduction confirmed by Hall-effect and photoluminescence measurements. The p-type film with a hole concentration of 2.16× 10¹⁷ cm⁻³, mobility of 1.30 cm²/V.s and resistivity of 22.29 Ω-m were obtained at substrate temperature of 700 °C. ZnO homojunction synthesized by in-situ deposition of As doped p-ZnO layer on Al doped n-ZnO layer showed p-n diode like characteristics. X-ray pole figure and Transmission Electron Microscope studies confirm epitaxial nature of the films. Photoluminescence results exhibit the peaks associated with donor acceptor pair emission.     

Effect of different annealing temperature on Sb-doped ZnO thin films prepared by pulsed laser deposition on sapphire substrates

Influence of annealing temperature on the properties of Sb-doped ZnO thin films were studied. Hall measurement results indicated that the Sb-doped ZnO annealed at 950 °C was p-type conductivity. X-ray diffraction (XRD) results indicated that the Sb-doped ZnO thin films prepared at the experiments are high c-axis oriented. It was worth noting that p-type sample had the worst crystallinity. The measurements of low-temperature photoluminescence (PL) spectra indicate that the sample annealed at the temperatures of 950 °C showed strong acceptor-bound exciton (A⁰X) emission, and confirmed that it is related to Sb-doping by comparing with the undoped ZnO low-temperature PL spectrum.     

Structure and optical properties of nanostructured zinc oxide films with different growth temperatures

ZnO films were prepared by pulsed laser deposition (PLD) on glass substrate with temperature ranging from room temperature (RT) to 500 °C. All the films formed the hexagonal wurtzite structure and showed the c-axis (0 0 2) preferred orientation. The films deposited at 200 °C showed the narrowest full width at half maximum of both X-ray diffraction (XRD) and rocking curve, largest height grain size, smallest macrostress and least point defects. Meanwhile, it was found that the films deposited at 350 °C displayed the most intense diffraction peak in XRD and a strong UV emission while it showed the most intense defect-related green emission, fastest growth rate and larger macrostress. In addition, the cross section images showed all films grew with a columnar form along (0 0 2) orientation.     

Green electroluminescence from an n-ZnO: Er/p-Si heterostructured light-emitting diode

Erbium-doped ZnO (ZnO:Er) thin films with various doping concentrations were deposited on p-Si substrates by ultrasonic spray pyrolysis (USP). The n-ZnO:Er/p-Si heterojunctions were further employed to fabricate light-emitting diodes (LEDs). The devices showed diode-like rectifying current–voltage characteristics with a low reverse breakdown voltage, attributed to the avalanche breakdown. A distinct green electroluminescence peaking at 537 nm and 558 nm were observed at room temperature under reverse bias. The green electroluminescence originated from the electron impact excitation of Er³⁺ ions doped in ZnO films.     

Effects of the sputtering time of ZnO buffer layer on the quality of GaN thin films

ZnO thin films with different thickness (the sputtering time of ZnO buffer layers was 10 min, 15 min, 20 min, and 25 min, respectively) were first prepared on Si substrates using radio frequency magnetron sputtering system and then the samples were annealed at 900 °C in oxygen ambient. Subsequently, a GaN epilayer about 500 nm thick was deposited on ZnO buffer layer. The GaN/ZnO films were annealed in NH₃ ambient at 950 °C. X-ray diffraction (XRD), atom force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL) were used to analyze the structure, morphology, composition and optical properties of GaN films. The results show that their properties are investigated particularly as a function of the sputtering time of ZnO layers. For the better growth of GaN films, the optimal sputtering time is 15 min.     

Surface morphology of ZnO buffer layer and its effects on the growth of GaN films on Si substrates by magnetron sputtering

ZnO thin films were first prepared on Si(111) substrates using a radio frequency magnetron sputtering system. Then the as-grown ZnO films were annealed in oxygen ambient at temperatures of 700, 800, 900, and 1000°C , respectively. The morphologies of ZnO films were studied by an atom force microscope (AFM). Subsequently, GaN epilayers about 500 nm thick were deposited on the ZnO buffer layers. The GaN/ZnO films were annealed in NH₃ ambient at 900°C. The microstructure, morphology and optical properties of GaN films were studied by x-ray diffraction (XRD), AFM, scanning electron microscopy (SEM) and photoluminescence (PL). The results are shown, their properties having been investigated particularly as a function of the ZnO layers. For better growth of the GaN films, the optimal annealing temperature of the ZnO buffer layers was 900°C.     

Structural and optical properties of SrCu2O2 films deposited on sapphire substrates by pulsed laser deposition

We deposited SrCu₂O₂ (SCO) films on sapphire (Al₂O₃) (0 0 0 1) substrates by pulsed laser deposition. The crystallographic orientation of the SCO thin film showed clear dependence on the growth temperature. X-ray diffraction (XRD) and transmission electron microscopy (TEM) analysis showed that the film deposited at 400 °C was mainly oriented in the SCO [2 0 0] direction, whereas when the growth temperature was increased to 600 °C, the SCO film showed a dominant orientation of SCO [1 1 2]. The SCO film deposited at 500 °C was obvious polycrystalline, showing multi peaks from (2 0 0), (1 1 2), and (2 1 1) diffraction in the XRD spectrum. The SCO film deposited at 600 °C showed a band gap energy of 3.3 eV and transparency up to 80% around 500 nm. The photoluminescence (PL) spectra of the SCO films grown at 500 °C and 600 °C mainly showed blue-green emission, which was attributed to the intra-band transition of the isolated Cu⁺ and Cu⁺–Cu⁺ pairs according to the temperature dependent-PL analysis.     

Effect of annealing on the properties of N-doped ZnO films deposited by RF magnetron sputtering

N-doped ZnO films were deposited by RF magnetron sputtering in N₂/Ar gas mixture and were post-annealed at different temperatures (T_a) ranging from 400 to 800 °C in O₂ gas at atmospheric pressure. The as-deposited and post-annealed films were characterized by their structural (XRD), compositional (SIMS, XPS), optical (UV-vis-NIR spectrometry), electrical (Hall measurements), and optoelectronic properties (PL spectra). The XRD results authenticate the improvement of crystallinity following post-annealing. The weak intensity of the (0 0 2) reflection obtained for the as-deposited N-doped ZnO films was increased with the increasing T_a to become the preferred orientation at higher T_a (800 °C). The amount of N-concentration and the chemical states of N element in ZnO films were changed with the T_a, especially above 400 °C. The average visible transmittance (400-800 nm) of the as-deposited films (26%) was increased with the increasing T_a to reach a maximum of 75% at 600 °C but then decreased. In the PL spectra, A⁰X emission at 3.321 eV was observed for T_a = 400 °C besides the main D⁰X emission. The intensity of the A⁰X emission was decreased with the increasing T_a whereas D⁰X emission became sharper and more optical emission centers were observed when T_a is increased above 400 °C.     

Structural and optical properties of nanocrystalline ZnO thin films synthesized by the citrate precursor route

Nanocrystalline zinc oxide (ZnO) thin films have been deposited by spin-coating polymeric precursors synthesized by the citrate precursor route using ethylene glycol and citric acid as chelating agents. The ZnO thin films were annealed in air at different temperatures for 10 min. The films were characterized by different structural and optical techniques, including X-ray diffraction (XRD), atomic force microscopy (AFM), optical transmission spectroscopy, and photoluminescence (PL). The thermal decomposition of polymeric precursor was studied by thermogravimetric analysis (TGA). XRD analysis with grazing incidence and rocking curves indicate that the ZnO films are polycrystalline with preferential orientation along the c-axis direction with a full-width at half-maximum (FWHM) of 0.31° for 600 °C-annealed samples. On annealing, the texturing in films increased along with a decrease in FWHM. AFM micrographs illustrate that the ZnO films are crack-free with well-dispersed homogeneous and uniformly distributed spherical morphology. The synthesized ZnO thin films have transparency >85% in the visible region exhibiting band edge at 375 nm, which becomes sharper with anneal. Room temperature PL spectra of these films show strong ultraviolet (UV) emission around 392 nm with an increase in intensity with annealing temperature, attributed to grain growth. Deconvolution of the PL spectra reveals that there is coupling of free excitons with higher orders of longitudinal optical (LO) phonon replicas leading to a broad asymmetric near-band-edge peak.     

Induction of p-type conduction in sputtered deposited Al-N codoped ZnO thin films

Al and N codoped ZnO thin films were grown on n-Si (100) substrate by sputtering technique. Hall effect measurements of as-grown films exhibited n-type conduction, however 500 °C Ar annealed codoped films showed p-type conductivity with a hole concentration of 9.9 × 10¹⁶ cm^− 3, resistivity of 15.95 Ω-cm and hole mobility of 3.95 cm²/Vs, respectively. Codoped ZnO thin films were found to be highly c-axis oriented with good crystal quality. A neutral acceptor-bound exciton and donor-acceptor-pair emissions that appeared at room temperature photoluminescence measurement verify p-type conduction in Al and N codoped ZnO film. The current-voltage characteristics of p-n heterojunction evidently showed a diode like rectifying behaviour.     

Influence of annealing temperature on the structural, optical and mechanical properties of ALD-derived ZnO thin films

ZnO thin films grown on Si(1 1 1) substrates by using atomic layer deposition (ALD) were annealed at the temperatures ranging from 300 to 500 °C. The X-ray diffraction (XRD) results show that the annealed ZnO thin films are highly (0 0 2)-oriented, indicating a well ordered microstructure. The film surface examined by the atomic force microscopy (AFM), however, indicated that the roughness increases with increasing annealing temperature. The photoluminescence (PL) spectrum showed that the intensity of UV emission was strongest for films annealed at 500 °C. The mechanical properties of the resultant ZnO thin films investigated by nanoindentation reveal that the hardness decreases from 9.2 GPa to 7.2 GPa for films annealed at 300 °C and 500 °C, respectively. On the other hand, the Young's modulus for the former is 168.6 GPa as compared to a value of 139.5 GPa for the latter. Moreover, the relationship between the hardness and film grain size appear to follow closely with the Hall-Petch equation.