Au/BiOBr/石墨烯复合物的制备及其苯酚降解光催化性能

采用水热法和多巴胺还原法制备了Bi OBr、Bi OBr/石墨烯和Au/Bi OBr/石墨烯光催化剂,并利用扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)、光致发光光谱(PL)和紫外-可见漫反射光谱(UV-vis DRS)等方法表征其形貌、相结构、光谱吸收性质以及组成结构。在可见光照射下,通过对水相中苯酚的降解,考察了Au/Bi OBr/石墨烯复合光催化剂活性。结果表明,由于量子效率的提高、带隙能的降低(2.25 e V)以及Au表面等离子体共振,复合光催化剂表现出比纯Bi OBr更高的光催化活性,Au/Bi OBr/石墨烯复合物在180 min内对苯酚降解率可达到64%。     

Preparation and measurement of properties of BiOBr/BiOCl/PANI ternary nanocomposite for highly efficient visible light photocatalytic applications

In this paper, we report the synthesis of the BiOBr/BiOCl/PANI ternary nanocomposite using a simple co-precipitation method. The modified photocatalyst produced was characterized by the FT-IR, FE-SEM equipped with EDS (as a Map), TEM, XRD, PL, Raman, and UV–Vis DRS analytical techniques. The synergetic effect of PANI and surface defects in nanoplates can prolong the recombination rate of photo-generated charge carriers. Thus, photocatalytic and photoelectrochemical activities of samples have been studied. Then, the methyl orange (MO) degradation performance of PANI/BiOBr and BiOBr/BiOCl/PANI was investigated under visible light irradiation. The lamp used to simulate sunlight in this photocatalytic study process was power down white light (5-W LED), less reported. The results got exhibited that the as-prepared BiOBr/BiOCl/PANI (90:10, Bi:PANI) nanocomposite showed a higher photocatalytic efficiency. Based on the scavenger tests, ^·O₂^? played a significant role in the degradation of MO. The connection between BiOBr, BiOCl, and PANI improved photocatalytic activity, which enhanced migration rate of the photo-generated electrons besides limiting the recombination of photo-generated electron–hole pairs.

     

Photocatalytic activity of nitrogen and copper doped TiO2 nanoparticles prepared by microwave-assisted sol-gel process

Cu and N-doped TiO₂ photocatalysts were synthesized from titanium (IV) isopropoxide via a microwave-assisted sol-gel method. The synthesized materials were characterized by X-ray diffraction, UV-vis diffuse reflectance, photoluminescence (PL) spectroscopy, SEM, TEM, FT-IR, Raman spectroscopy, photocurrent measurement technique, and nitrogen adsorption–desorption isotherms. Raman spectra and XRD showed an anatase phase structure. The SEM and TEM images revealed the formation of an almost spheroid mono disperse TiO₂ with particle sizes in the range of 9-17 nm. Analysis of N₂ isotherm measurements showed that all investigated TiO₂ samples have mesoporous structures with high surface areas. The optical absorption edge for the doped TiO₂ was significantly shifted to the visible light region. The photocurrent and photocatalytic activity of pure and doped TiO₂ were evaluated with the degradation of methyl orange (MO) and methylene blue (MB) solution under both UV and visible light illumination. The doped TiO₂ nanoparticles exhibit higher catalytic activity under each of visible light and UV irradiation in contrast to pure TiO₂. The photocatalytic activity and photocurrent ability of TiO₂ have been enhanced by doping of the titania in the following order: (Cu, N) - codoped TiO₂ > N-doped TiO₂ > Cu-doped TiO₂ > TiO₂. COD result for (Cu, N)-codoped TiO₂ reveals ∼92% mineralization of the MO dye on six h of visible light irradiation.     

Preparation and photocatalytic activity of visible light-active sulfur and nitrogen co-doped SrTiO3

Nitrogen and sulfur co-doped SrTiO₃ was prepared by high energy grinding of the mixture of SrTiO₃ and thiourea. A new band gap in visible light region (522 nm) corresponding to 2.37 eV could be formed by the co-doping. The photocatalytic activity for nitrogen monoxide oxidation of SrTiO₃ in visible light region especially in the long wavelength range (λ > 510 nm) could be improved greatly. Under the irradiation of light with wavelength larger than 510 nm, the photocatalytic activity of nitrogen and sulfur co-doped SrTiO₃ was 10.9 times greater than that of pure SrTiO₃. The high visible light photocatalytic activity of this substance may be due to the formation of a new band gap that enables to absorb visible light effectively.     

Facile synthesis of GO as middle carrier modified flower-like BiOBr and C3N4 nanosheets for simultaneous treatment of chromium(VI) and tetracycline

A novel GO modified g-C₃N₄ nanosheets/flower-like BiOBr hybrid photocatalyst is fabricated by a facile method. The characterization results reveal that wrinkled GO is deposited between g-C₃N₄ nanosheets and flower-like BiOBr forming a Z-scheme heterojunction. As a mediator, plicate GO plays a positive role in prompting photogenerated electrons transferring through its sizeable 2D/2D contact surface area. The g-C₃N₄/GO/BiOBr hybrid displays a superior photocatalytic ability to g-C₃N₄ and BiOBr in photodegrading tetracycline (TC), whose removal efficiency could reach 96% within 2 h. Besides, g-C₃N₄/GO/BiOBr composite can reduce Cr(VI), and simultaneously treat TC and Cr(VI) combination contaminant under the visible light. The g-C₃N₄/GO/BiOBr ternary composite also exhibits satisfactory stability and reusability after four cycling experiments. Further, a feasible mechanism related to the photocatalytic process of g-C₃N₄/GO/BiOBr is put forward. This study offers a ternary hybrid photocatalyst with eco-friendliness and hopeful application in water pollution.     

Nickel ferrite/zinc oxide nanocomposite: Investigating the photocatalytic and antibacterial properties

A facile strategy was used for the synthesis of nickel ferrite/zinc oxide (NiFe₂O_4/ZnO) nanocomposite via an ultra-sonication method and observed its recyclability and photostability with enhanced visible light-driven photocatalytic performance. The photo degradation activities of as-synthesized photocatalysts were investigated using various dyes including methylene blue, crystal violet and methyl orange under solar light irradiation. Prepared material degrades 49.2% methyl orange, 44.4% methyl blue and 41.3% crystal violet in 40 min. Further, the synergistic effect of nickel ferrite and zinc oxide can reduce the probability of recombination of charge carrier and boost the charge separation which leads to remarkable photocatalytic performance. Magnetic properties of nickel ferrite reduces the agglomeration of material and increases the recyclability. The NiFe₂O_4/ZnO nanocomposites also exhibited better antibacterial activity for Pseudomonas aeruginosa and Staphylococcus aureus, which shows that they can be used for both environmental and biological applications.     

Surfactant assisted hydrothermal synthesis of SnO nanoparticles with enhanced photocatalytic activity

SnO nanoparticles have been successfully synthesized in the presence of Triton-X 100 (TX-100) surfactant via hydrothermal method for the first time, and the photocatalytic activity under UV and visible light irradiation for the degradation of Methylene Blue (MB) and Rhodamine B (RdB) organic textile dyes was investigated. The structural, morphological and chemical characterizations were investigated by using X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), selected area electron diffraction (SAED), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), Fourier Transform Infrared Spectroscopy (FTIR), UV–vis. diffuse reflectance spectroscopy (UV–vis DRS) and photoluminescence (PL) analysis. The results reveal that the addition of surfactant, TX-100, in the precursor solutions leads to reduction in crystallite size with significant changes in morphological structure of SnO nanoparticles. The synthesized SnO nanoparticles show excellent photocatalytic activity under UV or visible light irradiation. MB and RdB dyes degraded completely under UV irradiation after 90 and 150 min, respectively. Also, MB and RdB dyes degraded only 150 min later under visible light illumination with a little amount of photocatalyst (0.8 g/L). Hence, this work explores the facile route to synthesizing efficient SnO nanoparticles for degrading organic compound under both UV and visible light irradiations.     

Heterojunction of BiPO4/BiOBr photocatalysts for Rhodamine B dye degradation under visible LED light irradiation

BiOBr synthesized by alcoholysis precipitation is used in the preparation of BiPO₄/BiOBr composites by adding H₃PO₄. Pristine BiOBr and a series of BiPO₄/BiOBr composites have been successfully synthesized using an entirely room-temperature production process. X-ray powder diffraction, scanning electron microscopy, High-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, UV–vis absorption spectroscopy were used to investigated the bulk structure, surface morphology, element composition and optical properties of the samples. The degradation effect of different proportions of BiPO₄/BiOBr composites, BiOBr and BiPO₄ on Rhodamine B (RhB) was evaluated under visible LED light irradiation. Compared to pure BiOBr and BiPO₄, the as-synthesized BiPO₄/BiOBr composites showed enhanced performance, with 30% BiPO₄/BiOBr composite showing the best performance, as it could degrade 95.66% of RhB (100 ml, 15 mg/L) within 120 min. The enhanced photocatalytic activity of BiPO₄/BiOBr was attributed to the heterojunction formation between BiOBr and BiPO₄ and efficient charge separation.     

ZnO修饰提升花状BiOBr的可见光催化降解罗丹明B性能

以Bi(NO3)3·5H2O、Zn(CH3COO)2·2H2O和NaBr为前驱体,采用简单溶剂热法制备BiOBr/ZnO三维花状微纳米复合材料.采用X射线衍射、扫描电子显微镜、X射线光子能谱、N2吸附-脱附、光致发光和电子顺磁共振等分析技术对其理化性质进行了表征.通过可见光催化降解罗丹明B(RhB)的实验测试了复合材料...     

Novel Bi/BiOBr/AgBr composite microspheres: Ion exchange synthesis and photocatalytic performance

Novel Bi/BiOBr/AgBr composite microspheres were prepared by a rational in situ ion exchange reaction between Bi/BiOBr microspheres and AgNO₃. The characteristic of the as-obtained ternary microspheres was tested by X-ray diffraction (XRD), energy dispersive X-ray spectrometer (EDS), scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV–vis diffuse reflectance spectroscopy (UV–vis DRS) and photoluminescence (PL). Under visible light irradiation, Bi/BiOBr/AgBr microspheres exhibited an excellent photocatalytic efficiency for rhodamine B (RhB) degradation, which was about 1.4 and 4.9 times as high as that of Bi/BiOBr and BiOBr/AgBr, demonstrating that the highest separation efficiency of charge carriers in the heterostructured Bi/BiOBr/AgBr. The photocatalytic activity of Bi/BiOBr/AgBr microspheres just exhibited a slight decrease after three consecutive cycles. The photocatalytic mechanism investigation confirmed that the superoxide radicals (O₂^•−) were the dominant reactive oxygen species for RhB degradation in Bi/BiOBr/AgBr suspension.     

Fabrication of dual Z-scheme photocatalyst via coupling of BiOBr/Ag/AgCl heterojunction with P and S co-doped g-C3N4 for efficient phenol degradation

Advances in noble metal mediated Z-scheme photocatalytic system have ushered in a climax on environmental remediation. Herein, graphitic carbon nitride (GCN) and phosphorus sulphur co-doped graphitic carbon nitride (PSCN) were synthesized via calcination process. GCN, PSCN and Z-scheme visible light driven (VLD) ternary BiOBr/PSCN/Ag/AgCl nanophotocatalyst were characterized by X-ray diffraction pattern (XRD), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and UV–visible diffuse reflectance spectra (UV–vis DRS). BiOBr/PSCN/Ag/AgCl nanocomposite exhibited superior visible light driven photocatalytic ability as compared to pristine PSCN, AgCl and BiOBr towards degradation of phenol. The results explicated promising photocatalytic activity along with space separation of photocarriers caused via formation of BiOBr/PSCN/Ag/AgCl Z-scheme heterojunction. The visible light absorption efficacy of BiOBr/PSCN/Ag/AgCl photocatalyst was confirmed by photoluminescence (PL) spectra. Finally, recycling experiments were explored for the mechanistic detailing of phenol photodegradation employing BiOBr/PSCN/Ag/AgCl photocatalyst. After seven successive cycles photodegradation efficacy of photocatalyst was reduced to 90% from 98%. Proposed mechanism of BiOBr/PSCN/Ag/AgCl nanophotocatalyst for degradation of phenol was discussed. OH and O₂⁻ radicals were main reactive species responsible for photocatalytic phenol degradation.     

Mesoporous cadmium bismuth niobate (CdBi_2Nb_2O_9) nanospheres for hydrogen generation under visible light

Herein, we report visible light active mesoporous cadmium bismuth niobate(CBN) nanospheres as a photocatalyst for hydrogen(H_2) generation from copious hydrogen sulfide(H_2S). CBN has been synthesized by solid state reaction(SSR) and also using combustion method(CM) at relatively lower temperatures.The as-synthesized materials were characterized using different techniques. X-ray diffraction analysis shows the formation of single phase orthorhombic CBN. Field emission scanning electron microscopy and high resolution-transmission electron microscopy showed the particle size in the range of ~0.5–1 μm for CBN obtained by SSR and 50–70 nm size nanospheres using CM, respectively. Interestingly, nanospheres of size 50–70 nm self assembled with 5–7 nm nanoparticles were observed in case of CBN prepared by CM.The optical properties were studied using UV–visible diffuse reflectance spectroscopy and showed band gap around ~3.0 eV for SSR and 3.1 eV for CM. The slight shift in band gap of CM is due to nanocrystalline nature of material. Considering the band gap in visible region, the photocatalytic activity of CBN for hydrogen production from H_2S has been performed under visible light. CBN prepared by CM has shown utmost hydrogen evolution i.e. 6912 μmol/h/0.5 g which is much higher than CBN prepared using SSR.The enhanced photocatalytic property can be attributed to the smaller particle size, crystalline nature,high surface area and mesoporous structure of CBN prepared by combustion method. The catalyst was found to be stable, active and can be utilized for water splitting.     

Constructing recyclable photocatalytic BiOBr/Ag nanowires/cotton fabric for efficient dye degradation under visible light

In this study, a highly-efficient photocatalytic and recyclable BiOBr/Ag nanowires (AgNW)/cotton fabric (CF) composite was fabricated by successive ionic layer adsorption and reaction (SILAR) for rapid treatment of dye wastewater. The integration of AgNW and BiOBr aims to establish a channel for faster and easier charge transfer to enhance the photocatalytic performance. The chemical structure and morphology of BiOBr/AgNW/CF, as well as its photo-degradation of Rhodamine B (RhB) under visible light radiation were explored. Results reveal that BiOBr/AgNW/CF exhibits remarkably enhanced photocatalytic activity over BiOBr/CF, which degrades 97 % of RhB within 90 min. BiOBr/AgNW/CF still maintains 88 % of photocatalytic degradation capacity after five reusing cycles due to the effective encapsulation of BiOBr that protects AgNW from oxidation. Photoluminescence, electron spin resonance, and free radical trapping experiments confirm that the separation efficiency of photo-generated electron-hole pairs plays an important role in improving photocatalytic performance. In all, this work exhibits great potential in the development of textile-based photocatalytic materials that integrates two significant merits, the high degradation efficiency and easy recovery.     

Synthesis,characterization and photocatalytic performance of W,N, S-tri-doped TiO2 under visible light irradiation

W–S–N-tri-doped TiO₂ photocatalysts (WSNTiO₂) were prepared by a simple sol–gel method. Tungstic acid, sodium sulfate and urea were used as tungsten, sulfur and nitrogen sources, respectively. The morphology and microstructure characteristics of the photocatalysts were evidenced by means of XRD, BET, TEM, SEM and UV–vis DRS techniques. The XRD results show that the main crystal phase of samples is anatase. It was also found that the tri-doping of TiO₂ increases its BET specific surface area from 95 to 121 m²·g⁻¹. Besides, it was shown that tri-doping narrows the band gap of TiO₂ effectively, which has greatly improved the photocatalytic activity in the visible light region. The photocatalytic activity of tri-doped TiO₂ powders was compared to that of bi-doped ones through the degradation of Congo Red (CR) under visible irradiation. Thus, the prepared 0.5% W–N–S–TiO₂ heat treated at 450 °C showed the best photocatalytic activity compared to the prepared pure TiO₂, Degussa P25, and co-doped samples (WNTiO₂ and WSTiO₂). In particular, a Congo Red degradation rate of approximately 99% was reached after only 35 min of visible light irradiation in the presence of 0.5% of WNSTiO₂. Total organic carbon (TOC) removal of CR was up to 72% and confirmed its significant mineralization in the presence of 0.5% of WNSTiO₂ photocatalyst.     

The improved photocatalytic properties of P-type NiO loaded porous TiO2 sheets prepared via freeze tape-casting

For the interest of the practical application, porous TiO₂ sheets were prepared by a novel freeze tape-casting method, in order to improve the photocatalytic activities of these TiO₂ sheets, p-type NiO was loaded by chemical solution deposition. The samples were characterized by a series of physical means, including XRD, SEM, EDS, XPS, ICP-OES, and UV-vis spectroscopy. The photocatalytic activities of the samples were evaluated by the degradation of methyl orange solution. The results showed that the photocatalytic activity of the TiO₂ sheet was greatly enhanced by the NiO loading, and the photocatalytic efficiency increased with increasing the NiO loading, the extraordinary performance for the NiO-loaded sample with 0.1 M precursor dipped was related to its unique morphology. The sample annealed at 600 °C showed the better photocatalytic activity than the sample annealed at 400 °C and 800 °C. The improvement of the photocatalytic activity was attributed to the formation of p–n junctures at the interface of the NiO/TiO₂, which facilitates the photoinduced electron/hole pairs' separation by the inner electric field, thus leading to the higher photocatalytic activities for the NiO-loaded TiO₂ sheets.     

Enhanced photocatalytic activity and stability of AgBr/BiOBr/graphene heterojunction for phenol degradation under visible light

In this work, we have reported synthesis of AgBr/BiOBr photocatalyst supported on graphene (Gr) using facile precipitation method. AgBr/BiOBr/Gr was characterized using various spectral techniques like FESEM, TEM, XRD, FTIR, XPS, Raman and PL analyses. AgBr/BiOBr/Gr had improved visible light absorption. PL studies indicated the reduction in recombination of photogenerated electron hole pair of AGBr/BiOBr/Gr. AFM analysis confirmed the thickness of AGBr/BiOBr/Gr was less than 8.0 nm. The higher dispersibility of photocatalyst was ascertained by Tyndall effect. AgBr/BiOBr/Gr photocatalyst was effectively used for the photodegradation of phenol from simulated water. The phenol degradation process was remarkably influenced by adsorption process. The concurrent adsorption and photocatalytic was effective for degradation of phenol. The phenol was completely mineralized into CO₂ and H₂O in 6 h. The degradation process followed pseudo first order kinetics. The results confirmed that integration of AgBr/BiOBr with graphene caused an increase in photocatalytic activity due to reduced recombination of photogenerated electron hole pair and electron sink behavior of graphene for photogenerated electrons of BiOBr. AgBr/BiOBr/Gr photocatalyst displayed significant stability and recyclability for ten catalytic cycles.     

A New p‐Metal‐n Structure AgBr‐Ag‐BiOBr with Superior Visible‐Light‐Responsive Catalytic Performance

A novel visible‐light‐driven AgBr‐Ag‐BiOBr photocatalyst was synthesized by a facile hydrothermal method. Taking advantage of both p‐n heterojunctions and localized surface plasmon resonance, the p‐metal‐n structure exhibited a superior performance concerning degradation of methyl orange under visible‐light irradiation (λ>420 nm). A possible photodegradation mechanism in the presence of AgBr‐Ag‐BiOBr composites was proposed, and the radical species involved in the degradation reaction were investigated. HO₂^?/^?O₂^? played the same important role as ^?OH in the AgBr‐Ag‐BiOBr photocatalytic system, and both the electron and hole were fully used for degradation of organic pollutants. A dual role of metallic Ag in the photocatalysis was proposed, one being surface plasmon resonance and the other being an electron‐hole bridge. Due to the distinctive p‐metal‐n structure, the visible‐light absorption, the separation of photogenerated carriers and the photocatalysis efficiency were greatly enhanced.     

TiO2/EDTA-rich carbon composites: Synthesis,characterization and visible-light-driven photocatalytic reduction of Cr(VI)

TiO₂/EDTA-rich carbon composites exhibits excellent photoreduction of Cr(VI) activity via ligand-to-metal charge transfer process.     

Syntheses and characterizations of transition metal-doped ZnO

The transition metal-doped zinc oxides, Zn_1?xM_xO (M = Cu, Mn and Fe) were synthesized by using solid-state reaction method and co-precipitation method. Samples prepared by co-precipitation method showed exactly same structure and properties compared to those made by solid-state reaction method. XRD, XRF and mapping analyses showed that Zn was successfully substituted with Cu, Mn and Fe by co-precipitation method. Zn_1?xM_xO samples exhibited new absorption shoulder in visible light region so that they showed photocatalytic activity in the visible light region. The highest photocatalytic activity under visible light was found in the Mn-substituted zinc oxide.     

n-p异质结型CdS/BiOBr复合光催化剂的制备及性能

采用两步水热法制备了CdS/BiOBr复合光催化剂,并通过X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和紫外-可见漫反射光谱(UV-Vis DRS)等手段对其物相、表面结构、光响应性等性质进行了表征.结果表明,合成的CdS/BiOBr复合材料是n-p型异质结,由CdS颗粒裹附在BiOBr纳米球的表面构成,这种结构不仅具有良好的可见光响应范围,且有利于光生电子的迁移,并有效地抑制光生电子/空穴对的复合.通过光催化降解模拟染料废水和光催化脱除模拟含硫燃料评价了CdS/BiOBr复合材料的可见光催化性能.结果表明,6%(质量分数)CdS/BiOBr降解次甲基蓝的拟一级动力学常数分别为BiOBr和CdS的5.3和9.6倍,脱除噻吩的拟一级动力学常数分别为BiOBr和CdS的1.9和3.2倍.CdS/BiOBr具有良好的光催化稳定性,循环使用5次后,降解率仍能达到90%以上.