Cytotoxicity of Exfoliated Transition‐Metal Dichalcogenides (MoS2, WS2, and WSe2) is Lower Than That of Graphene and its Analogues

Studies involving transition‐metal dichalcogenides (TMDs) have been around for many decades and in recent years, many were focused on using TMDs to synthesize inorganic analogues of carbon nanotubes, fullerene, as well as graphene and its derivatives with the ultimate aim of employing these materials into consumer products. In view of this rising trend, we investigated the cytotoxicity of three common exfoliated TMDs (exTMDs), namely MoS₂, WS₂, and WSe₂, and compared their toxicological effects with graphene oxides and halogenated graphenes to find out whether these inorganic analogues of graphenes and derivatives would show improved biocompatibility. Based on the cell viability assessments using methylthiazolyldiphenyl‐tetrazolium bromide (MTT) and water‐soluble tetrazolium salt (WST‐8) assays on human lung carcinoma epithelial cells (A549) following a 24 h exposure to varying concentrations of the three exTMDs, it was concluded that MoS₂ and WS₂ nanosheets induced very low cytotoxicity to A549 cells, even at high concentrations. On the other hand, WSe₂ exhibited dose‐dependent toxicological effects on A549 cells, reducing cell viability to 31.8 % at the maximum concentration of 400 μg mL^?1; the higher cytotoxicity displayed by WSe₂ might be linked to the identity of the chalcogen. In comparison with graphene oxides and halogenated graphenes, MoS₂ and WS₂ were much less hazardous, whereas WSe₂ showed similar degree of cytotoxicity. Future in‐depth studies should be built upon this first work on the in vitro cytotoxicity of MoS₂ and WS₂ to ensure that they do not pose acute toxicity. Lastly, nanomaterial‐induced interference control experiments revealed that exTMDs were capable of reacting with MTT assay viability markers in the absence of cells, but not with WST‐8 assay. This suggests that the MTT assay is not suitable for measuring the cytotoxicity of exTMDs because inflated results will be obtained, giving false impressions that the materials are less toxic.     

Exfoliated transition metal dichalcogenides (MoS2, MoSe2, WS2, WSe2): An electrochemical impedance spectroscopic investigation

Owing to the enthralling properties which transition metal dichalcogenides present, they are facing immense scientific interest from researchers. Till date, these two-dimensional materials have been assessed for a wide array of different applications and there are various synthetic methods of attaining them in their respective bulk and exfoliated forms. Herein, we explore the effects of lithium ion intercalation exfoliation process on the charge transfer resistance of transition metal dichalcogenide materials (MoS₂, MoSe₂, WS₂ and WSe₂). We also show that electrochemical activation of the transition metal dichalcogenides results in decreased resistance towards charge transfer, as demonstrated by electrochemical impedance spectroscopy.     

Transition metal dichalcogenide thin films for solar hydrogen production

In the last three decades, transition metal dichalcogenides (TMDs) have been extensively studied for electronic, photonic, and energy applications. Different efforts are directed to find a holy grail of efficient and economically feasible materials that could be simple in production and available on a large scale. The interest in TMDs (MoS₂, WS₂, MoSe₂, WSe₂) stems from their suitable electronic structure for efficient solar light absorption and simple exfoliation technique of 2D crystallites due to the van der Waals bonding of these materials. This led to various designs and combinations of 2D single layers that could form heterojunctions and multijunctions for efficient light absorption, charge carrier generation/separation, and its transfer in optoelectronic and energy harvesting devices. Herein, TMD thin films are reviewed as photoelectrodes for solar hydrogen evolution and compared to that of other more developed materials.     

Water-processable nanocomposite based on polyaniline and 2D molybdenum disulfide for NIR-transparent ambipolar transport layers

Polymer nanocomposite based on stable water-dispersible polyaniline complex with poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PANI–PAMPSA) and 2D molybdenum disulphide (MoS₂) was developed. The nanocomposite layers obtained by drop-casting were characterized by Vis–NIR- and FTIR spectroscopies, as well as by atomic force, transmission electron, and Kelvin-probe microscopies, X-ray diffraction, cyclic voltammetry, Hall effect, and DC-conductivity measurements. It was shown that the preparation procedure allows easy adjusting of MoS₂ content in the nanocomposite resulting in the growth of DC conductivity by up to six times in the case of 20 wt% MoS₂ as compared with the additive-free PANI–PAMPSA complex. FTIR spectroscopy revealed the existence of hydrophobic interactions between PANI–PAMPSA and 2D MoS₂ nanophase, which facilitate interchain electron transfer. Hall effect studies showed that while increasing MoS₂ content in the nanocomposite, a transition occurs from monopolar hole transport, characteristic of PANI–PAMPSA, to ambipolar transport. This feature makes the obtained PANI–PAMPSA/MoS₂ composite a promising material for different optoelectronic devices, in particular tandem solar cells.     

花瓣状微球MoS2/石墨烯复合材料的制备及其电化学性能

采用有利于二维层状结构形成的L-半胱氨酸作为硫源,钼酸钠作为钼源,制备聚乙烯基吡咯烷酮（PVP）辅助水热合成花瓣状微球形貌的MoS₂/还原氧化石墨烯复合电极材料（PVP-MoS₂/RGO）. X射线衍射（XRD）及透射电子显微镜（TEM）证实,经过PVP的适量添加,MoS₂有序堆垛结构的片层数目明显减少. 扫描电子显微镜（SEM）显示,添加适量PVP的MoS₂/石墨烯材料具有分散性更好的花瓣状微球形貌. 上述的少层有序堆垛结构及复合材料的良好分散性缩短了MoS₂中锂离子的嵌入/脱出路径,使其具有更高的容量、循环稳定性和倍率性能.     

MoS2 nanosheets and bulk materials altered lipid profiles in 3D Caco-2 spheroids

MoS₂ nanosheets（NSs） are novel 2 D nanomaterials（NMs） with potential uses in many areas, and therefore oral exposure route to MoS₂ NSs is plausible. Currently, MoS₂ NSs are considered as biocompatible NMs, but there is lacking of systemic investigations to study the interactions of MoS₂ NSs with intestinal cells. In this study, we exposed the 3D Caco-2 spheroids to MoS₂ NSs or MoS₂ powders（denoted as MoS₂-bulk）, and inv...     

MoS2‐on‐MXene Heterostructures as Highly Reversible Anode Materials for Lithium‐Ion Batteries

Two‐dimensional (2D) heterostructured materials, combining the collective advantages of individual building blocks and synergistic properties, have spurred great interest as a new paradigm in materials science. The family of 2D transition‐metal carbides and nitrides, MXenes, has emerged as an attractive platform to construct functional materials with enhanced performance for diverse applications. Here, we synthesized 2D MoS₂‐on‐MXene heterostructures through in situ sulfidation of Mo₂TiC₂T_x MXene. The computational results show that MoS₂‐on‐MXene heterostructures have metallic properties. Moreover, the presence of MXene leads to enhanced Li and Li₂S adsorption during the intercalation and conversion reactions. These characteristics render the as‐prepared MoS₂‐on‐MXene heterostructures stable Li‐ion storage performance. This work paves the way to use MXene to construct 2D heterostructures for energy storage applications.     

Confining Free Radicals in Close Vicinity to Contaminants Enables Ultrafast Fenton‐like Processes in the Interspacing of MoS2 Membranes

Heterogenous Fenton‐like reactions are frequently proposed for treating persistent pollutants through the generation of reactive radicals. Despite great efforts to optimize catalyst activity, their broad application in practical settings has been restricted by the low efficiency of hydrogen peroxide or persulfate decomposition as well as ultrafast self‐quenching of the activated radicals. Theoretical calculations predicted that two‐dimensional (2D) metallic 1T phase MoS₂ materials with exposed (001) surfaces and (100) edges should have remarkable affinity towards crucial intermediates in the peroxymonosulfate (PMS) activation process. X‐ray photoelectron spectroscopy and in situ Raman spectroscopy were used to show that the exposed metallic Mo sites accelerate the rate‐limiting step of electron transfer. A lamellar membrane made from a stack of 2D MoS₂ with tunable interspacing was then designed as the catalyst. The non‐linear transport between the MoS₂ nanolayers leads to high water diffusivity so that the short‐lived reactive radicals efficiently oxidize contaminants.     

Dependence of the Properties of 2D Nanocomposites Generated by Covalent Crosslinking of Nanosheets on the Interlayer Separation: A Combined Experimental and Theoretical Study

Covalently cross-linked heterostructures of 2D materials are a new class of materials which possess electrochemical and photochemical hydrogen evolution properties. It was of considerable interest to investigate the role of interlayer spacing in the nanocomposites involving MoS₂ and graphene sheets and its control over electronic structures and catalytic properties. We have investigated this problem with emphasis on the hydrogen evolution properties of these structures by a combined experimental and theoretical study. We have linked MoS₂ based nanocomposites with other 2D materials with varying interlayer spacing by changing the linker and studied their hydrogen evolution properties. The hydrogen evolution activity for these composites decreases with increasing linker length, which we can link to a decrease in magnitude of charge transfer across the layers with increasing interlayer spacing. Factors such as the nature of the sheets, interlayer distance as well as the nature of the linker provide pathways to tune the properties of covalently cross-linked 2D material rendering this new class of materials highly interesting.     

Controllable n-type doping in WSe2 monolayer via construction of anion vacancies

The successful applications of two-dimensional (2D) transition metal dichalcogenides highly rely on rational regulation of their electronic properties. The nondestructive and controllable doping strategy is of great importance to implement 2D materials in electronic devices. Herein, we propose a straightforward and effective method to realize controllable n-type doping in WSe₂ monolayer by electron beam irradiation. Electrical measurements and photoluminescence (PL) spectra verify the strong n-doping in electron beam-treated WSe₂ monolayers. The n-type doping arises from the generation of Se vacancies and the doping degree is precisely controlled by irradiation fluences. Due to the n-doping-induced narrowing of the Schottky barrier, the current of back-gated monolayer WSe₂ is enhanced by an order of magnitude and a ∼8× increase in the electron filed-effect mobility is observed. Remarkably, it is a moderate method without significant reduction in electrical performance and severe damage to lattice structures even under ultra-high doses of irradiation.     

Transition metal dichalcogenides (MoS2, MoSe2, WS2 and WSe2) exfoliation technique has strong influence upon their capacitance

Transition metal dichacogenides (TMD) represent an important class of layered compounds which are gaining lately an enormous interest in electrochemistry. Exfoliation of TMD materials to obtain single to few layer sheets is generally obtained through the intercalation of organolithium compounds. Here we investigated and compared the capacitive behavior of four representative TMD materials, i.e. MoS₂, MoSe₂, WS₂ and WSe₂ exfoliated with different organolithium intercalators, such as methyllithium (Me-Li), n-butyllithium (n-Bu-Li) and tert-butyllithium (t-Bu-Li). We found that both the metal/chalcogen composition and the type of intercalator strongly affect the capacitance of the exfoliated materials. These findings shall have profound implications on the construction of high-performance energy storage devices based on TMD.     

MoS2/Ag nanohybrid: A novel matrix with synergistic effect for small molecule drugs analysis by negative-ion matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

This paper reports a facile synthesis of molybdenum disulfide nanosheets/silver nanoparticles (MoS₂/Ag) hybrid and its use as an effective matrix in negative ion matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). The nanohybrid exerts a strong synergistic effect, leading to high performance detection of small molecule analytes including amino acids, peptides, fatty acids and drugs. The enhancement of laser desorption/ionization (LDI) efficiency is largely attributed to the high surface roughness and large surface area for analyte adsorption, better dispersibility, increased thermal conductivity and enhanced UV energy absorption as compared to pure MoS₂. Moreover, both Ag nanoparticles and the edge of the MoS₂ layers function as deprotonation sites for proton capture, facilitating the charging process in negative ion mode and promoting formation of negative ions. As a result, the MoS₂/Ag nanohybrid proves to be a highly attractive matrix in MALDI-TOF MS, with desired features such as high desorption/ionization efficiency, low fragmentation interference, high salt tolerance, and no sweet-spots for mass signal. These characteristic properties allowed for simultaneous analysis of eight different drugs and quantification of acetylsalicylic acid in the spiked human serum. This work demonstrates for the first time the fabrication and application of a novel MoS₂/Ag hybrid, and provides a new platform for use in the rapid and high throughput analysis of small molecules by mass spectrometry.     

Two‐Dimensional Semiconductors Grown by Chemical Vapor Transport

Developing controlled approaches for synthesizing high‐quality two‐dimensional (2D) semiconductors is essential for their practical applications in novel electronics. The application of chemical vapor transport (CVT), an old single‐crystal growth technique, has been extended from growing 3D crystals to synthesizing 2D atomic layers by tuning the growth kinetics. Both single crystalline individual flakes and continuous films of 1 L MoS₂ were successfully obtained with CVT approach at low growth temperatures of 300–600 °C. The obtained 1 L MoS₂ exhibits high crystallinity and comparable mobility to mechanically exfoliated samples, as confirmed by both atomic resolution microscopic imaging and electrical transport measurements. Besides MoS₂, this method was also used in the growth of 2D WS₂, MoSe₂, Mo_x W_1−x S₂ alloys, and ReS₂, thus opening up a new way for the controlled synthesis of various 2D semiconductors.     

Functionalization of Liquid‐Exfoliated Two‐Dimensional 2H‐MoS2

Layered two‐dimensional (2D) inorganic transition‐metal dichalchogenides (TMDs) have attracted great interest as a result of their potential application in optoelectronics, catalysis, and medicine. However, methods to functionalize and process such 2D TMDs remain scarce. We have established a facile route towards functionalized layered MoS₂. We found that the reaction of liquid‐exfoliated 2D MoS₂, with M(OAc)₂ salts (M=Ni, Cu, Zn; OAc=acetate) yielded functionalized MoS₂–M(OAc)₂ materials. Importantly, this method furnished the 2H‐polytype of MoS₂ which is a semiconductor. X‐ray photoelectron spectroscopy (XPS), diffuse reflectance infrared Fourier transform spectroscopy (DRIFT–IR), and thermogravimetric analysis (TGA) provide strong evidence for the coordination of MoS₂ surface sulfur atoms to the M(OAc)₂ salt. Interestingly, functionalization of 2H‐MoS₂ allows for its dispersion/processing in more conventional laboratory solvents.     

Two‐Dimensional Layered Heterostructures Synthesized from Core–Shell Nanowires

Controlled stacking of different two‐dimensional (2D) atomic layers will greatly expand the family of 2D materials and broaden their applications. A novel approach for synthesizing MoS₂/WS₂ heterostructures by chemical vapor deposition has been developed. The successful synthesis of pristine MoS₂/WS₂ heterostructures is attributed to using core–shell WO_3?x/MoO_3?x nanowires as a precursor, which naturally ensures the sequential growth of MoS₂ and WS₂. The obtained heterostructures exhibited high crystallinity, strong interlayer interaction, and high mobility, suggesting their promising applications in nanoelectronics. The stacking orientations of the two layers were also explored from both experimental and theoretical aspects. It is elucidated that the rational design of precursors can accurately control the growth of high‐quality 2D heterostructures. Moreover, this simple approach opens up a new way for creating various novel 2D heterostructures by using a large variety of heteronanomaterials as precursors.     

Highly-Efficient Ion Gating through Self-Assembled Two-Dimensional Photothermal Metal-Organic Framework Membrane

Biological ion channels regulate the ion flow across cell membrane via opening or closing of the pores in response to various external stimuli. Replicating the function of high ion gating effects with artificial porous materials has been challenging. Herein, we report that the self-assembled two-dimensional metal-organic framework (MOF) membrane can serve as an excellent nanofluidic platform for smart regulation of ion transport. The MOF membrane with good photothermal performance exhibits extremely high ion gating ratio (up to 10⁴), which is among the highest values in MOF membrane nanochannels for light-controlled ion gating reported so far. By repeatedly turning on and off the light, the nanofluidic device shows outstanding stability and reversibility that can be applied in the remote light-switching system. This work may spark promising applications of MOF membrane with variety of stimuli responsive properties in ion sieving, biosensing, and energy conversion.     

MoS2 Nanoflowers with Expanded Interlayers as High‐Performance Anodes for Sodium‐Ion Batteries

MoS₂ nanoflowers with expanded interlayer spacing of the (002) plane were synthesized and used as high‐performance anode in Na‐ion batteries. By controlling the cut‐off voltage to the range of 0.4–3 V, an intercalation mechanism rather than a conversion reaction is taking place. The MoS₂ nanoflower electrode shows high discharge capacities of 350 mAh g^?1 at 0.05 A g^?1, 300 mAh g^?1 at 1 A g^?1, and 195 mAh g^?1 at 10 A g^?1. An initial capacity increase with cycling is caused by peeling off MoS₂ layers, which produces more active sites for Na⁺ storage. The stripping of MoS₂ layers occurring in charge/discharge cycling contributes to the enhanced kinetics and low energy barrier for the intercalation of Na⁺ ions. The electrochemical reaction is mainly controlled by the capacitive process, which facilitates the high‐rate capability. Therefore, MoS₂ nanoflowers with expanded interlayers hold promise for rechargeable Na‐ion batteries.     

Electronic Structures and Thermoelectric Properties of Two-Dimensional MoS2/MoSe2 Heterostructures

Thermoelectric properties of bulk and bilayer two-dimensional (2D) MoS₂/MoSe₂ heterostructures are investigated using density functional theory in conjunction with semiclassical Boltzmann transport theory. It is predicted that the bulk 2D heterostructures could considerably enhance the thermoelectric properties as compared with the bulk MoSe₂. The enhancement originates from the reduction in the band gap and the presence of interlayer van der Waals interactions. We therefore propose the 2D MoS₂/MoSe₂ heterostructures as a possible candidate material for thermoelectric applications.     

Single‐Step Synthesis of Mesoporous Carbon Nitride/Molybdenum Sulfide Nanohybrids for High‐Performance Sodium‐Ion Batteries

Molybdenum disulfide (MoS₂) is a promising candidate as a high‐performing anode material for sodium‐ion batteries (SIBs) due to its large interlayer spacing. However, it suffers from continued capacity fading. This problem could be overcome by hybridizing MoS₂ with nanostructured carbon‐based materials, but it is quite challenging. Herein, we demonstrate a single‐step strategy for the preparation of MoS₂ coupled with ordered mesoporous carbon nitride using a nanotemplating approach which involves the pyrolysis of phosphomolybdic acid hydrate (PMA), dithiooxamide (DTO) and 5‐amino‐1H‐tetrazole (5‐ATTZ) together in the porous channels of 3D mesoporous silica template. The sulfidation to MoS₂, polymerization to carbon nitride (CN) and their hybridization occur simultaneously within a mesoporous silica template during a calcination process. The CN/MoS₂ hybrid prepared by this unique approach is highly pure and exhibits good crystallinity as well as delivers excellent performance for SIBs with specific capacities of 605 and 431 mAhg^?1 at current densities of 100 and 1000 mAg^?1, respectively, for SIBs.     

Oppositely Charged Ti3C2Tx MXene Membranes with 2D Nanofluidic Channels for Osmotic Energy Harvesting

Membrane‐based reverse electrodialysis (RED) is considered as the most promising technique to harvest osmotic energy. However, the traditional membranes are limited by high internal resistance and low efficiency, resulting in undesirable power densities. Herein, we report the combination of oppositely charged Ti₃C₂T_x MXene membranes (MXMs) with confined 2D nanofluidic channels as high‐performance osmotic power generators. The negatively or positively charged 2D MXene nanochannels exhibit typical surface‐charge‐governed ion transport and show excellent cation or anion selectivity. By mixing the artificial sea water (0.5 m NaCl) and river water (0.01 m NaCl), we obtain a maximum power density of ca. 4.6 Wm^?2, higher than most of the state‐of‐the‐art membrane‐based osmotic power generators, and very close to the commercialization benchmark (5 Wm^?2). Through connecting ten tandem MXM‐RED stacks, the output voltage can reach up 1.66 V, which can directly power the electronic devices.