Enthalpies of formation and isomerization of cis‐ and trans‐decalin,and their oxa‐analogs by G3(MP2)//B3LYP calculations

G3(MP2)//B3LYP calculations have been carried out on trans‐ and cis‐decalin, and their mono‐, di‐, tri‐, and tetraoxa‐analogs. The main purpose of the work was to obtain enthalpies of formation for these compounds, and to study the relative stabilities of the cis–trans and positional isomers of the various (poly)oxadecalins. Comparison of the computational enthalpies of formation with the respective experimental ones, known only for the decalins and 1,3,5,7‐tetraoxadecalins, shows that in both cases the computational values are more negative than the experimental ones, the deviations being ?5 to ?7 kJ mol^?1 for the decalins and ?12 to ?17 kJ mol^?1 for the 1,3,5,7‐tetraoxadecalins. The respective computational enthalpies of cis–trans isomerization, however, are in excellent to satisfactory agreement with the experimental data. The cis–trans enthalpy differences vary from +11.0 kJ mol^?1 for decalin to ?15.4 kJ mol^?1 for 1,4,5,8‐tetraoxadecalin. Low relative enthalpy values were also calculated for the cis isomers of 1,8‐dioxadecalin (?3.7 kJ mol^?1), 1,3,6‐trioxadecalin (?4.6 kJ mol^?1), 1,3,8‐trioxadecalin (?9.7 kJ mol^?1), 1,4,5‐ trioxadecalin (?5.6 kJ mol^?1), 1,3,5,8‐tetraoxadecalin (?7.3 kJ mol^?1), and 1,3,6,8‐tetraoxadecalin (?14.5 kJ mol^?1). Copyright © 2009 John Wiley & Sons, Ltd.     

Homo‐Diels–Alder reaction of a very inactive diene,bicyclo[2,2,1]hepta‐2,5‐diene,with the most active dienophile, 4‐phenyl‐1,2,4‐triazolin‐3,5‐dione. Solvent,temperature, and high pressure influence on the reaction rate

Solvent, temperature, and high pressure influence on the rate constant of homo‐Diels–Alder cycloaddition reactions of the very active hetero‐dienophile, 4‐phenyl‐1,2,4‐triazolin‐3,5‐dione (1), with the very inactive unconjugated diene, bicyclo[2,2,1]hepta‐2,5‐diene (2), and of 1 with some substituted anthracenes have been studied. The rate constants change amounts to about seven orders of magnitude: from 3.95^.10^?3 for reaction (1+2) to 12200 L mol^?1 s^?1 for reaction of 1 with 9,10‐dimethylanthracene (4e) in toluene solution at 298 K. A comparison of the reactivity (ln k₂) and the heat of reactions (?_r‐nH) of maleic anhydride, tetracyanoethylene and of 1 with several dienes has been performed. The heat of reaction (1+2) is ?218 ± 2 kJ mol^?1, of 1 with 9,10‐dimethylanthracene ?117.8 ± 0.7 kJ mol^?1, and of 1 with 9,10‐dimethoxyanthracene ?91.6 ±0.2 kJ mol^?1. From these data, it follows that the exothermicity of reaction (1+2) is higher than that with 1,3‐butadiene. However, the heat of reaction of 9,10‐dimethylanthracene with 1 (?117.8 kJ mol^?1) is nearly the same as that found for the reaction with the structural C=C counterpart, N‐phenylmaleimide (?117.0 kJ mol^?1). Since the energy of the N=N bond is considerably lower (418 kJ/bond) than that of the C=C bond (611 kJ/bond), it was proposed that this difference in the bond energy can generate a lower barrier of activation in the Diels–Alder cycloaddition reaction with 1. Linear correlation (R = 0.94) of the solvent effect on the rate constants of reaction (1+2) and on the heat of solution of 1 has been observed. The ratio of the volume of activation (?V^≠) and the volume of reaction (?V_r‐n) of the homo‐Diels–Alder reaction (1+2) is considered as “normal”: ?V^≠/?V_r‐n = ?25.1/?30.95 = 0.81. Copyright © 2012 John Wiley & Sons, Ltd.     

Double proton transfer in crystals of 1,3,4,6,7,8‐hexahydro‐2H‐pyrimido[1,2‐a] pyrimidine (hppH): 13C and 15N CPMAS NMR study of (hppH)2

In this paper, we report an example of intermolecular solid‐state proton transfer in the bicyclic guanidine, hppH. A combination of X‐ray crystallography, CPMAS NMR (¹³C and ¹⁵N) and theoretical calculations allows us to determine that a double proton transfer takes place in the (hppH)₂ dimer with an activation energy of about 50 kJ mol^?1. According to the B3LYP/6‐311++G(d,p) calculations, the double proton transfer occurs non‐symmetrically through a zwitterion. Copyright © 2009 John Wiley & Sons, Ltd.     

4‐Phenyl‐1,2,4‐triazoline‐3,5‐dione in the ene reactions with cyclohexene, 1‐hexene and 2,3‐dimethyl‐2‐butene. The heat of reaction and the influence of temperature and pressure on the reaction rate

The values of the enthalpy (53.3; 51.3; 20.0 kJ mol^?1), entropy (?106; ?122; ?144 J mol^?1K^?1), and volume of activation (?29.1; ?31.0; ?cm³ mol^?1), the reaction volume (?25.0; ?26.6; ?cm³ mol^?1) and reaction enthalpy (?155.9; ?158.2; ?150.2 kJ mol^?1) have been obtained for the first time for the ene reactions of 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione 1 , with cyclohexene 4 , 1‐hexene 6 , and with 2,3‐dimethyl‐2‐butene 8 , respectively. The ratio of the values of the activation volume to the reaction volume (?V^≠_corr/ΔV_{r ? n}) in the ene reactions under study, 1 + 4 → 5 and 1 + 6 → 7 , appeared to be the same, namely 1.16. The large negative values of the entropy and the volume of activation of studied reactions 1 + 4 → 5 and 1 + 6 → 7 better correspond to the cyclic structure of the activated complex at the stage determining the reaction rate. The equilibrium constants of these ene reactions can be estimated as exceeding 10¹⁸ L mol^?1, and these reactions can be considered irreversible. Copyright © 2014 John Wiley & Sons, Ltd.     

Theoretical studies on structure and performance of [1,2,5]‐oxadiazolo‐[3,4‐d]‐pyridazine‐based derivatives

Based on energetic compound [1,2,5]‐oxadiazolo‐[3,4‐d]‐pyridazine, a series of functionalized derivatives were designed and first reported. Afterwards, the relationship between their structure and performance was systematically explored by density functional theory at B3LYP/6‐311 g (d, p) level. Results show that the bond dissociation energies of the weakest bond (N–O bond) vary from 157.530 to 189.411 kJ · mol^?1. The bond dissociation energies of these compounds are superior to that of HMX (N–NO_2, 154.905 kJ · mol^?1). In addition, H1, H2, H4, I2, I3, C1, C2, and D1 possess high density (1.818–1.997 g · cm^?3) and good detonation performance (detonation velocities, 8.29–9.46 km · s^?1; detonation pressures, 30.87–42.12 GPa), which may be potential explosives compared with RDX (8.81 km · s^?1, 34.47 GPa ) and HMX (9.19 km · s^?1, 38.45 GPa). Finally, allowing for the explosive performance and molecular stability, three compounds may be suggested as good potential candidates for high‐energy density materials. Copyright © 2016 John Wiley & Sons, Ltd.     

Deprotonation and radicalization of glycine neutral structures

Ab initio calculations at MP2/6‐311++G(d,p) theoretical level were performed to study the deprotonation and radicalization processes of 13 glycine neutral structures (A. G. Császár, J. Am. Chem. Soc. 1992; 114 : 9568). The deprotonation processes to glycine neutral structures take place at the carboxylic sites instead of α‐C or amido sites. Two carboxylic deprotonated structures were obtained with the deprotonation energies calculated within the range of 1413.27–1460.03 kJ · mol^?1, which are consistent with the experimental results. However, the radicalization processes will take place at the α‐C rather than carboxylic O or amido sites, agreeing with the experimental results. Seven α‐C radicals were obtained with the radical stabilization energies calculated within the range of 44.87–111.78 kJ · mol^?1. The population analyses revealed that the main conformations of the neutral or radical state are constituted by several stable structures, that is, the other structures can be excluded from the future considerations and thus save computational resources. Copyright © 2007 John Wiley & Sons, Ltd.     

Anion effect on the conformational equilibrium of sulfamide and its N,N′‐diindolyl derivative: Insights on anion transportation

The relatively high acidity of the sulfamide hydrogens suggests a potential for the development of sulfamide derivatives as novel anion receptors. The interactions of sulfamide with F^?, Cl^?, CH₃COO^?, and H₂PO₄^? anions were spectroscopically (¹H and ¹⁹F NMR) and theoretically (density functional theory) analyzed, and the complexation through hydrogen bonds was confirmed by changes in the NMR signals and theoretical calculations. The replacement of 2 sulfamide hydrogens with indolyl groups yields the N,N′‐diindolylsulfamide ( DIS , N‐1H‐indol‐4‐yl‐N′‐1H‐indol‐7‐ylsulfuric diamide), whose bond rotations allow the interaction of 4 H(N) atoms with anions. The conformational preferences of DIS change upon the presence of anions, but they are practically insensitive to the anion type. According to the quantum theory of atoms in molecules, natural bond orbital analysis, and NMR chemical shifts, as well as to a thermodynamic cycle, the complex with fluoride is the most stable, followed by the oxoanion‐derived models.     

Conformational analysis of 3‐methyl‐3‐silathiane and 3‐fluoro‐3‐methyl‐3‐silathiane

The conformational equilibria of 3‐methyl‐3‐silathiane 5 , 3‐fluoro‐3‐methyl‐3‐silathiane 6 and 1‐fluoro‐1‐methyl‐1‐silacyclohexane 7 have been studied using low temperature ¹³C NMR spectroscopy and theoretical calculations. The conformer ratio at 103 K was measured to be about 5 _ax: 5 _eq = 15:85, 6 _ax: 6 _eq = 50:50 and 7 _ax: 7 _eq = 25:75. The equatorial preference of the methyl group in 5 (0.35 kcal mol^?1) is much less than in 3‐methylthiane 9 (1.40 kcal mol^?1) but somewhat greater than in 1‐methyl‐1‐silacyclohexane 1 (0.23 kcal mol^?1). Compounds 5–7 have low barriers to ring inversion: 5.65 (ax → eq) and 6.0 (eq → ax) kcal mol^?1 ( 5 ), 4.6 ( 6 ), 5.1 (Me_ax → Me_eq) and 5.4 (Me_eq → Me_ax) kcal mol^?1 ( 7 ). Steric effects cannot explain the observed conformational preferences, like equal population of the two conformers of 6 , or different conformer ratio for 5 and 7 . Actually, by employing the NBO analysis, in particular, considering the second order perturbation energies, vicinal stereoelectronic interactions between the Si–X and adjacent C–H, C–S, and C–C bonds proved responsible. Copyright © 2010 John Wiley & Sons, Ltd.     

Catalysis by hydrogen chloride in the gas‐phase elimination kinetics of 2‐phenyl‐2‐propanol and 3‐methyl‐1‐buten‐3‐ol

A homogeneous, molecular, gas‐phase elimination kinetics of 2‐phenyl‐2‐propanol and 3‐methyl‐1‐ buten‐3‐ol catalyzed by hydrogen chloride in the temperature range 325–386 °C and pressure range 34–149 torr are described. The rate coefficients are given by the following Arrhenius equations: for 2‐phenyl‐2‐propanol log k₁ (s^?1) = (11.01 ± 0.31) ? (109.5 ± 2.8) kJ mol^?1 (2.303 RT)^?1 and for 3‐methyl‐1‐buten‐3‐ol log k₁ (s^?1) = (11.50 ± 0.18) ? (116.5 ± 1.4) kJ mol^?1 (2.303 RT)^?1. Electron delocalization of the CH₂?CH and C₆H₅ appears to be an important effect in the rate enhancement of acid catalyzed tertiary alcohols in the gas phase. A concerted six‐member cyclic transition state type of mechanism appears to be, as described before, a rational interpretation for the dehydration process of these substrates. Copyright © 2007 John Wiley & Sons, Ltd.     

Kinetics of the gas‐phase homogeneous unimolecular elimination of selected ethyl esters of 2‐oxo‐carboxylic acids

The gas‐phase elimination kinetics of selected ethyl esters of 2‐oxo‐carboxylic acid have been studied over the temperature range of 270–415 °C and pressures of 37–114 Torr. The reactions are homogeneous, unimolecular, and follow a first‐order rate law in a seasoned static reaction vessel, with an added free radical suppressor toluene. The observed overall and partial rate coefficients are expressed by the following Arrhenius equations:

• Ethyl oxalyl chloride
• log k_overall (s^?1) = (13.22 ± 0.45) ? (179.4 ± 4.9) kJ mol^?1 (2.303 RT)^?1
• Ethyl piperidineglyoxylate
• log k_(CO2) (s^?1) = (12.00 ± 0.30) ? (191.2 ± 3.9) kJ mol^?1 (2.303 RT)^?1
• log k_(CO) (s^?1) = (12.60 ± 0.09) ? (210.7 ± 1.2) kJ mol^?1 (2.303 RT)^?1
• log k_t(overall) (s^?1) = (12.22 ± 0.26) ? (193.4 ± 3.4) kJ mol^?1 (2.303 RT)^?1
• Ethyl benzoyl formate
• log k_(CO2) (s^?1) = (12.89 ± 0.72) ? (203.8 ± 9.0) kJ mol^?1 (2.303 RT)^?1
• log k_(CO) (s^?1) = (13.39 ± 0.31) ? (213.3 ± 3.9) kJ mol^?1 (2.303 RT)^?1
• log k_t(overall) (s^?1) = (13.24 ± 0.60) ? (205.8 ± 7.6) kJ mol^?1 (2.303 RT)^?1

The kinetic and thermodynamic parameters of these reactions, together with those reported in the literature, lead to consider three different mechanistic pathways of elimination. Copyright © 2010 John Wiley & Sons, Ltd.     

Chemical potentials of water and organic solutes in imidazolium ionic liquids: a simulation study

The excess chemical potentials of a series of molecules dissolved in the ionic liquid dimethyl imidazolium chloride have been determined by a series of transformations. The molecules are water, methanol, dimethyl ether, acetone and propane. Water and methanol have large negative values of the excess chemical potential (-29kJmol^?1 and — 14kJ mol^?1 respectively); the polar molecules dimethyl ether and acetone have positive values of about 7kJmol^?1 while the value for propane is +26 kJ mol^?1. Hydrogen bonding to the anion plays an important part in the stabilization of water and methanol.     

On the structure of 3‐acetylamino‐5‐methyl‐1,2,4‐oxadiazole and on the fully degenerate rearrangements (FDR) of its anion: a stimulating comparison between the results of ‘in‐silicon chemistry’ and ‘laboratory chemistry’

An accurate crystal structure determination has provided evidence for a planar conformation for 3‐acetylamino‐5‐methyl‐1,2,4‐oxadiazole ( 5 ), in agreement with quantum‐mechanical calculations in the gas phase. In the crystal, a series of strong intermolecular N7H7^….O9 hydrogen bonds link the amido groups of different molecules, causing the formation of infinite parallel ordered chains. The effect of the DMSO solvent on the energy and charge distribution of compound 5 and on its relevant 5 ^? anion, involved in a fully degenerate rearrangement (FDR), has been deepened by quantum‐mechanical DFT calculations. The calculated energy barrier for the FDR increases in going from in vacuo to DMSO, in agreement with previsions based on the Hughes and Ingold rules concerning the nucleophilic substitution of an anionic reagent (the deprotonated amido group in the side chain) on a neutral substrate (the 1,2,4‐oxadiazole ring). Copyright © 2009 John Wiley & Sons, Ltd.     

Primary kinetic hydrogen isotope effects in deprotonations of a nitroalkane by intramolecular phenolate groups

Rate constants and kinetic isotope effects have been determined for the formation of nitronate anions from the ethers 1‐(2‐methoxyphenyl)‐2‐nitropropane, 7 (X = H, L = H and D) and 1‐(2‐methoxy‐5‐nitrophenyl)‐2‐nitropropane, 7 (X = NO₂, L = H and D), and from the corresponding phenols, 1‐(2‐hydroxyphenyl)‐2‐nitropropane, 3 (X = H, L = H and D), and 1‐(2‐hydroxy‐5‐nitrophenyl)‐2‐nitropropane, 3 (X = NO₂, L = H and D), in aqueous basic medium. For the ethers 7 , rates of deprotonation by hydroxide are comparable with those found for deprotonations of 2‐nitropropane, with k^H/k^D (25 °C) = 7.7 and 7.8, respectively. In both the cases, the isotope effects are conventionally temperature dependent. For the corresponding phenols 3 , conditions have been established under which the deprotonations of the nitroalkane are dominated by intramolecular deprotonation by the kinetically first‐formed phenolate anion, with an estimated effective molarity EM ～ 250. For 3 (X = H, L = H or D), k^H/k^D (25 °C) = 7.8, with E ? E = 6.9 kJ mol^?1 and A^H/A^D = 0.5. For 3 (X = NO₂, L = H or D), rates of intramolecular deprotonation are reduced 30‐fold, and an elevated kinetic isotope effect is found (k^H/k^D (25 °C) = 10.7). Activation parameters (E ? E = 17.8 kJ mol^?1 and A^H/A^D = 0.008) are compatible with an enhanced tunnelling contribution to reactivity in the H‐isotopomer. Copyright © 2009 John Wiley & Sons, Ltd.     

Selective Etching of N‐Doped Graphene Meshes as Metal‐Free Catalyst with Tunable Kinetics,High Activity and the Origin of New Catalytic Behaviors

New N‐doped reduced graphene oxide (N‐RGO) meshes are facile fabricated by selective etching of 3–5 nm nanopores, with controllable doping of N dopants at an ultrahigh N/C ratio up to 15.6 at%, from pristine graphene oxide sheets in one‐pot hydrothermal reaction. The N‐RGO meshes are illustrated to be an efficient metal‐free catalyst toward hydrogenation of 4‐nitrophenol, with new catalytic behaviors emerging in following three aspects: (i) tunable kinetics following pseudofirst order from commonly observed pseudozero order; (ii) strikingly improved activity with 26‐fold increased rate constant (1.0 s⁻¹ g⁻¹ L); (iii) no induction time required prior to reaction due to depressed back conversion, and dramatically decreased apparent activation energy (E_a) (17 kJ mol⁻¹). The origin of these new catalytic properties can be assigned to the synergetic effects between graphitic N doping and structural defects arising from nanopores. Deeper understanding unveils that the concentration of graphitic N is inverse proportion to E_a, while the pyrrolic N has no impact on this reaction, and oxygenate groups hampers it. The porous nature allows the N‐RGO meshes to conduct catalyze reactions in continuous flow fashion.     

Raman and ab initio study of the conformational isomerism in the 1‐ethyl‐3‐methyl‐imidazolium bis(trifluoromethanesulfonyl)imide ionic liquid

The calculated and experimental Raman spectra of the (EMI⁺)TFSI⁻ ionic liquid, where EMI⁺ is the 1‐ethyl‐3‐methylimidazolium cation and TFSI⁻ the bis(trifluoromethanesulfonyl)imide anion, have been investigated for a better understanding of the EMI⁺ and TFSI⁻ conformational isomerism as a function of temperature. Characteristic Raman lines of the planar (p) and non‐planar (np) EMI⁺ conformers are identified using the reference (EMI⁺)Br⁻ salt. The anion conformer of C₂ symmetry is confirmed to be more stable than the cis (C₁) one by 4.5 ± 0.2 kJ mol⁻¹. At room temperature, the population of trans (C₂) anions and np cations is 75 ± 2% and 87 ± 4%, respectively. Fast cooling quenches a metastable glassy phase composed of mainly C₂ anion conformers and p cation conformers, whereas slow cooling gives a crystalline phase composed of C₁ anion conformers and of np cation conformers. Copyright © 2006 John Wiley & Sons, Ltd.     

Study on the Interaction between Florasulam and Bovine Serum Albumin

In this paper, the interaction between florasulam (FU, 2′,6′,8-trifluoro-5-methoxy [Kragh-Hansen U, Molecular aspects of ligand binding to serum albumin. Pharmacol Rev 33(1):17–53 1981; Carter DC and Ho JX, Structure of serum albumin. Adv Protein Chem 45:153–203 1994; He XM, and Carter DC, Atomic structure and chemistry of human serum albumin. Nature 358(6383):209–215 1992] triazolo [1,5-c]pyrimidine-2-sulfonanilide) and bovine serum albumin (BSA) was investigated by fluorescence, ultraviolet absorption (UV) and Far-UV circular dichroism (CD) spectrometries. A strong fluorescence quenching was observed and the quenching mechanism was considered as static quenching. The binding constant of FU with BSA at 299 and 309 K were obtained as 1.5?×?10⁴ and 7.1?×?10³ l mol^?1, respectively. There was one binding site between FU and BSA. The thermodynamic parameters enthalpy change (ΔH) and entropy change (ΔS) were calculated as ?57.89 kJ mol^?1 and ?113.6 J mol^?1 K^?1, respectively, which indicated that the acting force between FU and BSA was mainly hydrogen bond and Van der Waals force. According to the Förster non-radiation energy transfer theory, the average binding distance between donor (BSA) and acceptor (FU) was obtained (r?=?1.59 nm). The investigations of the UV/Vis and CD spectra of the system showed that the conformation of BSA was changed in presence of FU.     

A turn-on fluorescent anion receptor based on N,N′-di-β-naphthyl-1,10-phenanthroline-2,9-diamide

A simple turn-on fluorescent anion chemosensor with amide moiety as binding sites was designed, synthesized and characterized. Binding ability of the receptor 1 with anions was evaluated through the fluorescence titration in DMSO and the ¹H NMR titration in DMSO-d₆ and coordination of anions to 1 led to a visible enhancement in fluorescence intensity. The fluorescence enhancement could be explained on the basis of two signaling transduction mechanisms: (1) inhibition of a photoinduced electronic transfer (PET) mechanism and (2) anion-induced increase of the rigidity of the host molecules. In addition, the results of ¹H NMR titrations suggested that a host-guest hydrogen-bonding complex with an association constant K_ass=7379 mol⁻¹ L was formed between 1 and F⁻ and the mode of host-guest interactions was provided.     

Solvent,salt and high pressure effects on the rate and equilibrium constants for the formation of tri‐n‐butylphosphoniumdithiocarboxylate

Solvent, salt and high pressure effects on the rate and equilibrium constants for the formation of tri‐n‐butylphosphoniumdithiocarboxylate at 298.2 K are reported. This equilibrium is shifted to the phosphobetaine in polar solvents, salt solutions and under high external pressure. The reaction volume changes dramatically on going from less polar diethyl ether (?69 cm³ mol^?1) and tetrahydrofurane (THF) (?66 cm³ mol^?1), to more polar acetonitrile (?39 cm³ mol^?1) and acetone (?38 cm³ mol^?1). Copyright © 2010 John Wiley & Sons, Ltd.     

A theoretical investigation about sensing mechanism of fluoride anion for (E)‐2‐(2‐(dimethylamino)ethyl)‐6‐(4‐hydroxystyryl)‐1H‐benzo[de]‐isoquinoline‐1,3 (2H)‐dione

In the present work, we theoretical study the sensing mechanism of a new fluoride chemosensor (E)‐2‐(2‐(dimethylamino)ethyl)‐6‐(4‐hydroxystyryl)‐1H‐benzo[de]‐isoquinoline‐1,3(2H)‐dione (the abbreviation is NIM ). Based on density functional theory and time‐dependent density functional theory methods, the fluoride anion response mechanism has been confirmed via constructing potential energy curve. The exothermal deprotonation process along with the intermolecular hydrogen bond O–H···F reveals the uniqueness of detecting F^?. After capturing hydrogen proton forming NIM‐A anion configuration, a new absorption peak around 655 nm appears in dimethyl sulfoxide solvent. In addition, the emission of NIM can be quenched when adding F^? has been also confirmed. Due to the twisted intramolecular charge transfer character NIM‐A‐S ₁ form, we further verify the experimental phenomenon. The theoretical electronic spectra (vertical excitation energies and fluorescence peak) reproduced previous experimental results (ACS Appl. Mater. Interfaces 2014, 6, 7996), which not only reveals the rationality of our theoretical level used in this work but also confirms the correctness of geometrical attribution. In view of the excitation process, the strong intramolecular charge transfer process of S₀ → S₁ transition explain the redshift of absorption peak for NIM with the addition of fluoride anion. This work presents a straightforward sensing mechanism (deprotonation process) of fluoride anion for the novel NIM chemosensor.     

Synthesis and Spectroscopic Studies of Some New Polyether Ligands of the Schiff Base Type

Abstract

New polyether ligands of Schiff base type (3–13) were synthesized from the reaction of diethylene glycol bis(2‐aminophenyl)ether and triethylene glycol bis(2‐aminophenyl)ether with salicylaldehyde, 5‐methoxysalicylaldehyde, 5‐bromosalicylaldehyde, 5‐nitro salicylaldehyde, and 2‐hydroxy‐1‐naphthaldehyde. The products were characterized by elemental analysis, IR, ¹H, ¹³C NMR, and UV‐VIS techniques. The UV‐VIS spectra of those Schiff bases with an OH group in the ortho position to the imino group were studied in polar and nonpolar solvents in acidic and basic media. The compounds are in tautomeric equilibrium (enol‐imine, O–H · N?keto‐amine, O · H–N forms) in solvents, acidic chloroform, and benzene solutions and basic DMSO, chloroform, and benzene solutions. These tautomers were not observed in polar and non‐polar solvents and in basic solutions of DMSO, chloroform, and benzene for the Schiff bases 5–10. Tautomer proportions, which were obtained from ¹H NMR and UV‐VIS data in DMSO, were compared for compounds 3, 4, 11, and 12.