加筋板壳稳定性分析中一种简单的有限元模式

采用考虑耦合和剪切效三结点十五参数罚函数层板壳单元和与之相适应的两结点非协调层合梁单元，适用于任意和筋复合材料层合板壳的稳定性分析。数值计算表明：该单元不仅对边界形状的适应性强，而且在工程精度范围内具有简单，经济，高效的优点。     

基于蚁群算法的复合材料缠绕壳体铺层顺序优化

为了提高纤维复合材料缠绕壳体结构的屈曲稳定性,本文将蚁群算法(ACA)求解旅行商问题(TSP)的方法引入到缠绕层顺序优化的计算中.阐明铺层顺序优化的本质是调整沿板厚方向的刚度分布以提高版的抗弯刚度,同时改善荷载的传递路径,以降低由偏心而产生的附加弯矩,从而提高结构的抗屈曲能力;扩展了经典蚁群算法,提出一种分组编解码方法...     

复合材料机翼加筋壁板稳定性分析

利用工程及有限元方法分别分析了加筋壁板整体和局部稳定性.分析发现:在有限元计算中模型边界条件的选取对分析结果有着较大的影响.通过大型有限元软件MSC.Patran/Nastran,计算了不同边界条件下加筋壁板稳定性,将结果与工程计算结果比较,得到一种有限元分析稳定性中较合适的模型及边界条件.同时运用论证的有限元模型及边界条件,分析了相同横截面积下,不同桁条设计方案的壁板整体稳定性,结果显示桁条横截面设计对加筋壁板的稳定性有着很大的影响.     

均布压力下正交异性圆锥扁壳的后屈曲分析

基于Ｋａｒｍａｎ型大挠度方程,用修正迭代法分析了均布压力下夹支正交异性圆锥扁壳的几何非线性的后屈曲行为,给出二阶近似的荷载挠度特征关系式及临界荷载,给出了三种正交异性参数对应数值结果,分析了正交异性参数对壳体变形和屈曲荷载的影响。     

轴压加筋板壳的弯扭稳定性分析

以统一的方式分析了轴压加筋板壳的弯扭稳定性.根据小挠度能量法,采用了约束剪心概念并考虑了加筋条偏心距,截面的翘曲刚度及剪心和形心间位置偏差等因素的影响,推导了屈曲方程。例题计算的结果表明了所提出方法的可行性。     

局部径向载荷作用下外压薄壁圆筒稳定性分析

为简化真空塔器外挂件支撑区局部失稳分析,提炼出局部径向载荷作用下外压薄壁圆筒稳定性计算模型. 以易拉罐为薄壁圆筒试件,对不同外压下试件的局部径向临界载荷进行了测试. 利用有限元法对各实验模型进行了特征值屈曲分析,结果与实验数据能较好地吻合. 采用正交设计及参数化计算,得到了各结构参数及外压下的局部径向临界载荷经验公式. 实例计算表明,所得经验公式稍有保守,可用于真空塔器外挂件支撑件区的局部稳定性分析.     

大开口复合材料加筋壁板稳定性分析

运用大型有限元软件Patran/Nastran分析了大开口复合材料加筋壁板的稳定性,并对不同加筋方式下壁板屈曲特征值和屈曲模态图进行了比较。结果表明:补强提高了大开口复合材料壁板的稳定性,但往往无法达到很好的效果,需要通过加筋改善其稳定性;加筋复合材料壁板稳定性较原有模型有较大提高;加筋大开口复合材料壁板屈曲特征值随筋条距开口中心距离的增加而减小,其屈曲分界线均位于筋条布置处;纵筋大开口复合材料加筋壁板一阶屈曲特征值为2.13,而横筋只达到1.08;纵筋布置对复合材料壁板稳定性影响明显高于横筋布置,可在实际工程应用中适当增加纵筋的布置。     

不同长桁截面复合材料加筋板轴压屈曲分析

基于轴向压缩载荷工况,加筋板重量相同、长桁轴线间距相等、长桁截面占比相当的前提,采用试验和数值计算方法研究“I”形加筋板和“J”形加筋板屈曲特性及其失效模式。研究结果表明：“I”形加筋板与“J”形加筋板抗屈曲承载能力相当,后屈曲承载能力较“J”形加筋板提高约19.8%;特征值屈曲法计算值较试验值误差约11%,究其主要原因是特征值理论不考虑加载过程中长桁刚度对蒙皮支持变弱的影响,故其计算值较试验值偏大;考虑就地效应及横向应力分量对基体剪切强度的影响,构建加筋板失效模型,计算值与试验值误差约8%,且预测的失效模式与试验破坏模式一致性较好。     

外压加筋圆柱壳总体屈曲Koiter——边界层奇异摄动法

将Ｋｏｉｔｅｒ理论和奇异摄动理论中的边界层法相结合处理加筋圆柱壳无因次化非线性边界层型Ｋａｒｍａｎ－Ｄｏｎｎｅｌ方程由分支点和边界层导致的双重奇异性，提出外压加筋圆柱壳总体屈曲Ｋｏｉｔｅｒ—边界层奇异摄动法。从摄动意义上分析边界条件，前屈曲非线性和初始几何缺陷对外压加筋圆柱壳屈曲载荷的影响。算例表明，本方法具有良好的计算效率和计算精度，与数值解相比更能揭示内在影响规律。     

A new displacement-type stability equation and general stability analysis of laminated composite circular conical shells with triangular grid stiffeners

In this paper,based on the theory of Donnell-type shallow shell,a new displacement-type stability equations is first developed for laminated composite circular conical shellswith triangular grid stiffeners by using the variational calculus and generalized smeared-stiffener theory.The most general bending stretching couplings,the effect of eccentricity ofstiffeners are considered.Then,for general stability of composite triangular grid stiffenedconical shells without twist coupling terms,the approximate formulas are obtained forcritical external pressure by using Galerkin‘s procedure.Numerical examples for a certainC/E composite conical shells with inside triangular grid stiffeners are calculated and theresults are in good agreement with the experimental data.Finally,the influence of someparameters on critical external pressure is studied.The stability equations developed andthe formulas for critical external pressure obtained in this paper should be very useful in theastronautical engineering design.     

碳纳米管增强复合材料圆锥薄壳非线性自由振动

考虑碳纳米管复合材料作为功能梯度材料的不均匀性,基于连续介质理论以及哈密尔顿变分原理,建立了功能梯度碳纳米管增强复合材料开口圆锥薄壳结构的非线性运动偏微分控制方程,然后利用Galerkin法,将非线性偏微分控制方程转化为常微分控制方程,进而采用谐波平衡法求解了开口圆锥壳的非线性自由振动问题,并探讨了圆锥薄壳几何参数、碳纳米管参数对结构非线性自由振动的影响．数值研究表明结构的无量纲非线性自由振动频率与线性自由振动频率的比值随圆锥薄壳长厚比的增大而变小、并随圆锥角的增大而变大．     

Numerical Analysis of Axisymmetric Buckling of a Conical Shell under Radial Compression

The nonlinear boundary-value problem of the axisymmetric buckling of a simply supported conical shell (dome) under a radial compressive load applied to the supported edge is formulated for a system of six first-order ordinary differential equations for independent fields of finite displacements and rotations. Multivalued solutions are obtained using the shooting method with specified accuracy. For various values of the loading parameter, bifurcation of the solutions of the problem is studied and a parametric branching diagram is constructed. The buckling modes are obtained for three branches of the solution. Curves of the buckling modes corresponding to three isolated branches of the solution are given.     

Displacement type unified equation for bending, buckling and vibration of conical shells and its applications

By using Donnell's simplication and starting from the displacement type equations of conical shells, and introducing a displacement functionU(s,,) (In the limit case, it will be reduced to cylindrical shell displacement function introduced by V. S. Vlasov) and a generalized loadq,(s,,),the equations of conical shells are changed into an eighth—order solvable partial differential equation about the displacement functionU(s,,). As a special case, the general bending problem of conical shells on Winkler foundation has been studied. Detailed numerical results and boundary coefficients for edge unit loads are obtained.The project supported by the National Natural Science Foundation of China.     

锥壳的轴压屈曲

依据新的精确的锥壳屈曲分支方程 ,研究承受轴向压力的刚性圆顶夹支截锥壳的稳定性。构造的屈曲模态接近分支点变形。应用 Galerkin法计算了各种截锥比壳体在全锥度的临界特征值、屈曲荷载和临界应力。结果表明 ,轴压屈曲临界应力σcr 随几何参数ν的减小和截锥比λ的增大而减小。     

Stability of corrugated composite noncircular cylindrical shells under external pressure

Cylindrical shells consisting of cylindrical panels of smaller radius and subjected to uniform external pressure are analyzed for stability. The geometrical parameters of the shells are approximated by Fourier series on a discrete set of points. The Timoshenko theory of shells is used. The solution is represented in the form of trigonometric series. It is shown that short-and medium-length shells with cylindrical panels are advantageous over circular shells. By selecting appropriate parameters of the panels, keeping the mass of the shell constant, it is possible to achieve a significant gain in critical loads. The shells under consideration are less effective than isotropic shells. Shells with sinusoidal corrugation under external pressure are of no practical interest __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 12, pp. 91–102, December 2007.     

复合材料脱层梁的屈曲分析

本文研究了具有任意位置透型脱层的复合材料梁的屈曲问题。基于弹性理论建立了复合材料脱层梁的基本方程式。对脱层梁进行了分区处理,利用B样条函数作为位移型函数的基函数,方便地描述了脱层长度、脱层位置。考虑边界条件、区间位移连续性条件和弯矩剪力的平衡条件以及纵向内力的附加条件,对基本方程式进行了求解。得出了脱层位置不同,脱层长度不同的屈曲荷载的变化规律,并与轴对称脱层时的屈曲荷载进行了比较,认为层合梁考虑脱层对屈曲的影响是非常必要的。     

基于累积失效法的含损伤格栅加筋板非线性屈曲状态分析

分别采用基于Mindlin一阶剪切理论八节点层合板单元和三节点层合梁单元来模拟蒙皮和肋骨,用累积失效法研究了在压缩载荷作用下蒙皮内含分层损伤复合材料正交格栅加筋板的非线性屈曲性态,分析中考虑了加载过程中蒙皮和肋骨纤维断裂、基体损伤和纤维-基体剪切失效造成的刚度退化,并采用了非线性接触单元模型处理蒙皮分层上下子板间的接触效应。通过典型算例,讨论了蒙皮铺设方式、蒙皮分层的面积和深度、肋骨与蒙皮的刚度比,累积失效行为等因素对格栅加筋板非线性屈曲性态的影响。     

Stability of cylindrical shells made of a particulate composite with nonlinear elastic matrix and damaged inclusions

The bifurcation instability problem for cylindrical shells made of particulate composites with nonlinear elastic matrix and damaged inclusions is formulated and solved __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 8, pp. 80–91, August 2007.     

Low-Dimensional Galerkin Models for Nonlinear Vibration and Instability Analysis of Cylindrical Shells

This paper discusses the derivation of discrete low-dimensional models for the non-linear vibration analysis of thin shells. In order to understand the peculiarities inherent to this class of structural problems, the non-linear vibrations and dynamic stability of a circular cylindrical shell subjected to dynamic axial loads are analyzed. This choice is based on the fact that cylindrical shells exhibit a highly non-linear behavior under both static and dynamic axial loads. Geometric non-linearities due to finite-amplitude shell motions are considered by using Donnell’s nonlinear shallow shell theory. A perturbation procedure, validated in previous studies, is used to derive a general expression for the non-linear vibration modes and the discretized equations of motion are obtained by the Galerkin method. The responses of several low-dimensional models are compared. These are used to study the influence of the modelling on the convergence of critical loads, bifurcation diagrams, attractors and large amplitude responses of the shell. It is shown that rather low-dimensional and properly selected models can describe with good accuracy the response of the shell up to very large vibration amplitudes.