Comparison of analytical and semi-preparative columns for high-performance liquid chromatography-solid-phase extraction-nuclear magnetic resonance

The application of analytical and semi-preparative columns in reversed-phase liquid chromatography-solid-phase extraction-nuclear magnetic resonance (HPLC-SPE-NMR) was compared. The work was aiming at separating a higher sample amount in a single run and in this way to reduce the necessary NMR measurement time of separated compounds. Several parameters for compound separation and trapping procedures were optimised: flow rate of HPLC and make-up water pumps, choice of stationary phase cartridges and drying time. The separation and loadability of nine model compounds on analytical and semi-preparative columns was determined, as well as the focussing capacity of SH-type SPE cartridges. It was found that a semi-preparative column--or multiple peak trapping on analytical columns--gave better results than a standard 4.6mm analytical column for non-polar compounds (e.g. flavonoid aglycones, sesquiterpene lactones, non-polar terpenes, logP>2), but for polar compounds (logP<-2) did not offer any advantage over an analytical column, or was even disadvantageous. For intermediately polar compounds (-2相似文献   

Comparison of extraction procedures for the determination of arsenic and other elements in lobster tissue by inductively coupled plasma mass spectrometry

A variety of extraction procedures were evaluated for the extraction of arsenic and other analytes from lobster tissue samples using inductively coupled plasma mass spectrometry (ICP-MS) detection. Soxhlet, room temperature mixing, sonication, microwave assisted, supercritical carbon dioxide and subcritical water extractions were evaluated for a variety of solvent systems and optimum conditions determined using a partially defatted Lobster Hepatopancreas marine certified reference material, TORT-2 (National Research Council of Canada). The solubility trends and solvents into which the analytes extracted gave an indication as to the polar/non-polar nature of the compounds present. Analytes that prefer water are probably more polar or inorganic, while those preferring methanol solutions are less polar or organic in nature. Arsenic, cadmium, cobalt, molybdenum and selenium were probably all present in TORT-2 in both polar inorganic and non-polar organic forms. While TORT-2 may have contained similar amounts of selenium in both forms, the results suggested that more of the arsenic was present as less polar or more organic compounds, and cobalt existed mainly as more polar or inorganic species. Most of the extraction techniques suggested that, although there may be some less polar organic forms present, more of the cadmium was probably present as polar inorganic compounds. Additionally, most techniques indicated that molybdenum was possibly all less polar or more organic in nature. In general, microwave assisted extraction (MAE) yielded comparable or improved recoveries for all of the analytes monitored and usually required less solvent. Additionally, MAE proved to be the mildest, fastest, least complicated and most reproducible extraction technique evaluated. MAE at 75 degrees C for 2 min exposure time yielded quantitative recovery of arsenic from TORT-2. These conditions were evaluated for lobster tissue samples purchased from a local restaurant. Separate evaluation of the lobster meat and organs resulted in quantitative recoveries of arsenic from both tissue samples. The results indicated that the extraction efficiencies might have some dependence upon the extraction technique, extraction conditions, analyte, solvent, and sample matrix.     

Development of an analytical protocol for a fast,sensitive and specific protein recognition in paintings by enzyme-linked immunosorbent assay (ELISA)

Enzyme-linked immunosorbent assay (ELISA) analysis of proteins offers a particularly promising approach for investigations in cultural heritage on account of its appreciated properties of being highly specific, sensitive, relatively fast, and cost-affordable with respect to other conventional techniques. In spite of that, it has never been fully exploited for routine analyses of painting materials in consideration of several analytical issues that inhibited its diffusion in conservation science: limited sample dimensions, decrease of binder solubility and reduced availability of antibody bonding sites occurring with protein degradation. In this study, an ELISA analytical protocol suited for the identification of aged denatured proteins in ancient painting micro-samples has been developed. We focused on the detection of bovine β-casein and chicken ovalbumin as markers of bovine milk (or casein) and chicken albumen, respectively. A systematic experimentation of the ELISA protocol has been carried out on mock-ups of mural and easel painting prepared with 13 different pigments to assess limits and strengths of the method when applied for the identification of proteins in presence of a predominant inorganic matrix. The analytical procedure has been optimized with respect to protein extraction, antibodies’ concentrations, incubation time and temperature; it allows the detection of the investigated proteins with sensitivity down to nanograms. The optimized protocol was then tested on artificially aged painting models. Analytical results were very encouraging and demonstrated that ELISA allows for protein analysis also in degraded painting samples. To address the feasibility of the developed ELISA methodology, we positively investigated real painting samples and results have been cross-validated by gas chromatography–mass spectrometry.     

Subcritical water extraction of organic matter from sedimentary rocks

Subcritical water extraction of organic matter containing sedimentary rocks at 300 °C and 1500 psi produces extracts comparable to conventional solvent extraction. Subcritical water extraction of previously solvent extracted samples confirms that high molecular weight organic matter (kerogen) degradation is not occurring and that only low molecular weight organic matter (free compounds) are being accessed in analogy to solvent extraction procedures. The sedimentary rocks chosen for extraction span the classic geochemical organic matter types. A type I organic matter-containing sedimentary rock produces n-alkanes and isoprenoidal hydrocarbons at 300 °C and 1500 psi that indicate an algal source for the organic matter. Extraction of a rock containing type II organic matter at the same temperature and pressure produces aliphatic hydrocarbons but also aromatic compounds reflecting the increased contributions from terrestrial organic matter in this sample. A type III organic matter-containing sample produces a range of non-polar and polar compounds including polycyclic aromatic hydrocarbons and oxygenated aromatic compounds at 300 °C and 1500 psi reflecting a dominantly terrestrial origin for the organic materials. Although extraction at 300 °C and 1500 psi produces extracts that are comparable to solvent extraction, lower temperature steps display differences related to organic solubility. The type I organic matter produces no products below 300 °C and 1500 psi, reflecting its dominantly aliphatic character, while type II and type III organic matter contribute some polar components to the lower temperature steps, reflecting the chemical heterogeneity of their organic inventory. The separation of polar and non-polar organic compounds by using different temperatures provides the potential for selective extraction that may obviate the need for subsequent preparative chromatography steps. Our results indicate that subcritical water extraction can act as a suitable replacement for conventional solvent extraction of sedimentary rocks, but can also be used for any organic matter containing mineral matrix, including soils and recent sediments, and has the added benefit of tailored extraction for analytes of specific polarities.     

Packed column supercritical fluid chromatography with light-scattering detection. II. Retention behaviour of squalane and glucose with mixed mobile phases

Summary Evaporative light scattering detectors can be used to detect organic substances without chromophoric groups in packed column supercritical fluid chromatography (SFC). A detector of this type has been used to detect squalane and glucose after SFC with various packed columns and binary mobile phases. In this study, the amount of organic modifier in carbon dioxide/modifier mixtures was varied. The results give further insight into the mechanisms that influence retention behaviour in packed column separations with super- and subcritical mobile phases. Squalane is an ideal non-polar test solute which shows long retention times on non-polar columns while its elution can be accelerated by non-polar modifiers in carbon dioxide. Glucose is an extremely polar solute containing hydroxyl groups. Elution of this sugar can be improved with polar modifiers. Column packings with polar end groups lead to high capacity ratios and long retention times for glucose. Most columns used in this study contained silica-based packing materials. For purposes of comparison, a polymeric packing (HEMA RP-18) was also employed.     

An analytical multi-residue approach for the determination of semi-volatile organic pollutants in pine needles

Vegetation (and pine needles in particular) has been widely used as an alternative to other conventional sampling devices to assess the atmospheric presence of semi-volatile organic contaminants (SVOCs). While most analytical procedures developed focus only on one or two chemical classes, this this work intends to establish a multi-component protocol to quantify brominated flame-retardants (BFRs), polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs), polynuclear aromatic hydrocarbons (PAHs) and one class of contaminant of emerging concern, the synthetic musks fragrances (SMCs). Pine needles extracts were obtained by ultrasonic solvents extraction (USE), and different cleanup approaches using solid-phase extraction (SPE) employing combinations of sorbents and solvents as well as gel permeation chromatography (GPC) were tested. SPE with alumina followed by GCP yielded the best results, with average recoveries over 80%.     

Detection of volatile organic compounds by temperature-programmed desorption combined with mass spectrometry and Fourier transform infrared spectroscopy

A temperature-programmed desorption (TPD) device connected to a mass spectrometer was used to detect volatile organic compounds from air samples. The main aim was to develop an analytical method, by which both non-polar and polar organic components can be detected in the same run. In TPD, the adsorbed compounds are desorbed from the resin more slowly than in the conventional trapping techniques, such as purge-and-trap technique, in which the resin is flash-heated and the compounds are desorbed at the same time to a cryogenic trap or an analytical column. In TPD, the adsorbent resin acts also as an analytical column. In this way it is possible to obtain more rapid analysis, and also a more simple instrumentation, which can be used on-line and on-site. In this work, a new version of TPD device, which uses a resistor for heating and a Peltier element for rapid cooling, was designed and constructed. Various adsorbent resins were tested for their adsorption and desorption properties of both polar and non-polar compounds. When using a mixture of adsorbent resins, Tenax TA and HayeSep D, it was possible to analyze both polar, low-molecular weight compounds, such as methanol and ethanol, and non-polar volatile organic compounds, such as benzene and toluene, in the same run within 15 min including sampling. The same TPD principle was also tested using a Fourier transform infrared spectrometer as an analytical instrument, and the results showed that it was possible to obtain a separation of similar compounds, such as hexane and heptane, and still retaining the same sensitivity as the original on-line FTIR instrument.     

Sol-gel-coated oligomers as novel stationary phases for solid-phase microextraction

Amphiphilic and hydrophilic oligomers were synthesized and coated on fused silica capillaries using a sol-gel technique. Sol-gel-coated capillaries were evaluated for the solid-phase microextraction and preconcentration of a wide variety of non-polar and polar analytes. Both types of coatings were stable under high temperature (up to 280 degrees C). The extraction efficiency of the sol-gel coatings was evaluated for the extraction of both non-polar and polar analytes, including organochlorine pesticides, triazine herbicides, estrogens and alkylphenols (APs) and bisphenol-A (BPA). Compared with commercially available solid-phase microextraction (SPME) adsorbents such as poly(dimethylsiloxane)divenylbenzene and polyacrylate, the new materials showed comparable selectivity and sensitivity towards both non-polar and polar analytes. The new coatings gave good linearity and detection limits. For example with triazines, a detection limit of <0.005 microl l(-1), precision from 5.0 to 11.0% (n = 6) and linearity of the calibration plots (0.5 to 50 microl l(-1)) were obtained. The sol-gel coated SPME capillaries were used for the determination of triazine herbicides in reservoir water samples collected in Singapore.     

Bifunctional alkyl nitrates – trace constituents of the atmosphere

Mono- and multifunctional esters of nitric acid (alkyl nitrates or organonitrates) form very complex mixtures of organic trace constituents in air. An analytical method was developed which combines selectivity in separation and detection in order to simplify this complexity in analytical terms. Mononitrates, dinitrates, keto nitrates, hydroxy nitrates of alkanes and alkenes, respecitvely, and bifunctional terpene nitrates were synthesized as reference substances. A specially developed new HPLC stationary phase (organonitrate phase) allows a group separation of mono-, di-, and hydroxy nitrates. After the HPLC preseparation the single components were finally separated by capillary HRGC-ECD and HRGC-MSD on polar and non-polar stationary phases. Mass spectrometric detection in the selected-ion-mode using the highly selective NO₂ ⁺ fragment (m/z = 46 amu) led to very good selectivities for the nitric acid ester moiety. The analysis of a 100 m³ ambient air sample using this new analytical protocol allowed the identification of seven hydroxy nitrates and 24 dinitrates ranging from C2 to C7, 22 of them for the first time ever.     

Monte-carlo simulation of gas chromatographic separation for the prediction of retention times and peak half widths

Summary A new method for prediction of gas chromatographic retention times and peak half widths is based on the renewal theory. The only requirements are the heats of vaporization of the compounds to be separated and one calibration measurement. With this data, retention times and peak half widths can be predicted for isothermal as well as temperature-programmed gas chromatography. For the separation of non-polar substances on non-polar stationary phases the prediction error for retention times is approx. 1–2%. First simulations of polar molecules and polar stationary phases indicate that this method is also applicable in these cases but some extension will be required.     

Development of an analytical method for the determination of polybrominated diphenyl ethers in sewage sludge by the use of gas chromatography coupled to inductively coupled plasma mass spectrometry

Polybrominated diphenyl ethers (PBDEs) are flame retardants. As a consequence of their widespread use, they have been released into the environment. PBDEs are lipophilic organic contaminants that enter wastewater treatment plants (WWTPs) from urban, agricultural and industrial discharges. Because of their low aqueous solubility and resistance to biodegradation, up to 90% of the PBDEs are accumulated in the sewage sludge during the wastewater treatment. To assess the possibilities for sludge re-use, a reliable determination of the concentrations of these PBDEs is of crucial importance. Six PBDE congeners (BDE 28, BDE 47, BDE 99, BDE 100, BDE 153 and BDE 154) are listed as priority substances under the EU Water Framework Directive. In the present work a simple analytical method with minimal sample-preparation steps was developed for a sensitive and reliable determination of the six PBDEs in sewage sludge by the use of gas chromatography coupled to inductively coupled plasma mass spectrometry (GC-ICP-MS). For this purpose an extraction procedure was optimised. Different extracting agents (methanol (MeOH), acetic acid (AcOH)/MeOH mixture (3:1) and 0.1 mol L⁻¹ hydrochloric acid (HCl) in MeOH) followed by the addition of a Tris-citrate buffer (co-extracting agent) and iso-octane were applied under different modes of extraction (mechanical shaking, microwave- and ultrasound-assisted extraction). Mechanical shaking or the microwave-assisted extraction of sewage sludge with 0.1 mol L⁻¹ HCl in MeOH and the subsequent addition of the Tris-citrate buffer and the iso-octane extracted the PBDEs from the complex sludge matrix most effectively. However, due to easier sample manipulation during the extraction step, mechanical shaking was used. The PBDEs in the organic phase were quantified with GC-ICP-MS by applying a standard addition calibration method. The spike recovery test (recoveries between 95 and 104%) and comparative analyses with the species-specific isotope-dilution (ID) GC-ICP-MS confirmed the accuracy of the developed analytical procedure. The procedure is sensitive (limits of detection (LODs) for PBDEs congeners between 0.2 and 0.3 ng g⁻¹), repeatable and reproducible (RSDs 2.2–5.7%) and was applied for the determination of PBDEs in sewage sludge samples collected three times at the municipal WWTP over a period of 16 years.     

Development of a solid phase extraction protocol coupled with liquid chromatography mass spectrometry to analyze central carbon metabolites in lake sediment microcosms

An ion exchange solid phase extraction (SPE) strategy is developed for application with liquid chromatography-tandem quadrupole mass spectrometry (LC-MS/MS) for characterization of central carbon metabolites involved in methane assimilation and adjacent pathways in natural mixtures. For this purpose, short-time microcosm samples were obtained from lake sediment known to consume methane. Three SPE procedures were developed for the recovery of 51 targeted metabolites from five compound classes (amino acids, carboxylic acids, sugar phosphates, nucleotides and acyl-CoAs). The three SPE procedures employed were mixed mode (i) strong cation exchange, (ii) strong anion exchange and (iii) weak anion exchange. By spiking stable isotopic labeled standards, validation of the SPE procedures for the sediment extracts demonstrated that a 3 cm(3), 60 mg SPE sorbent bed provided effective loading capacity for targeted metabolites with an analytical variation of 16% RSD. We readily analyzed 32 of the targeted 51 metabolites using LC-MS/MS after sediment sample extraction, cleanup and pre-concentration. The remaining 19 targeted metabolites were either at, or below, the limit of detection. The current approach provides a good workflow for absolute quantification of intermediates in C(1)-carbon metabolism in natural microbial communities.     

Elucidation of molecular and elementary composition of organic and inorganic substances involved in 19th century wax sculptures using an integrated analytical approach

Wax sculptures contain several materials from both organic and inorganic nature. These works of art are particularly fragile. Determining their chemical composition is thus of prime importance for their preservation. The identification of the recipes of waxy pastes used through time also provides valuable information in the field of art history.The aim of the present research was to develop a convenient analytical strategy, as non-invasive as possible, that allows to identify the wide range of materials involved in wax sculptures.A multi-step analytical methodology, based on the use of complementary techniques, either non- or micro-destructive, was elaborated. X-ray fluorescence and micro-Raman spectroscopy were used in a non-invasive way to identify inorganic pigments, opacifiers and extenders. The combination of structural and separative techniques, namely infrared spectroscopy, direct inlet electron ionisation mass spectrometry and high temperature gas chromatography, was shown to be appropriate for unravelling the precise composition of the organic substances. A micro-chemical test was also performed for the detection of starch.From this study it has been possible to elucidate the composition of the waxy pastes used by three different sculptors at the end of the 19th century. Complex and elaborated recipes, in which a large range of natural substances were combined, were highlighted.     

基于气相色谱-质谱联用技术的水稻代谢轮廓分析方法的建立

开展了基于衍生化气相色谱-质谱联用的水稻代谢物分析方法的研究。采用D-最优试验设计对代谢物的提取溶剂进行优化,考察了水、甲醇、乙腈和异丙醇的提取效率,通过多元统计分析评价提取效能和溶剂配比的相关性,最终确立以80%(v/v)甲醇/水作为代谢物提取的最适溶剂。在此基础上对该方法的分析性能进行评价,发现绝大多数代谢物(＞90%)具有良好的精密度、重现性和稳定性(相对标准偏差小于30%),且占总峰面积88.0%的代谢物的响应值与其浓度间呈线性关系(相关系数＞0.9)。采用气相色谱-质谱联用方法从水稻种子中共鉴定出86个代谢物,涵盖糖、氨基酸、有机酸、甾体等多类浓度差异大的物质,适合于水稻的代谢表型差异研究。     

Stir-bar sorptive extraction: A view on method optimisation,novel applications,limitations and potential solutions

Introduced in 1999 as a novel solventless sample preparation method, stir-bar sorptive extraction (SBSE) has become a popular analytical technique for the pre-concentration of organic compounds into a polydimethylsiloxane (PDMS)-coated stir-bar. In the last 10 years, hundreds of applications in the environmental, food and biomedical fields can be found in the literature. However, only PDMS-coated stir-bars are commercially available, which reduces the applicability of SBSE to the extraction of the non-polar compounds due to the poor extractability of more polar analytes. In this review, a view on method optimisation, limitations, potential solutions such as in-house coatings and derivatisation and novel applications in multi-residue analysis and passive sampling are revised.     

On-line dual-precolumn-based trace enrichment for the determination of polar and acidic microcontaminants in river water by liquid chromatography with diode-array UV and tandem mass spectrometric detection

Dual-pre-column-based trace enrichment combined on-line with liquid chromatography-diode-array UV and tandem mass spectrometric detection was used to determine a wide polarity range of organic microcontaminants in river water. Various sorbents were studied for their extraction efficiency of (highly) polar and acidic compounds and their ability to selectively remove humic substances, which are normally co-extracted and interfere in the UV detection of polar microcontaminants. An optimised on-line dual-pre-column set-up with PLRP-S in the first pre-column and Hysphere-1 in the second pre-column was used to study the analytical performance of the procedure. Tandem MS was used for confirmation purposes and to quantify the organic microcontaminants in river water at the low-ng/l level. In addition, the influence of the type of sample (drinking and river water) on suppression of analyte responses in electrospray ionization MS was studied.     

HPLC study of the binding of sulfinpyrazone to serum albumin

Summary A thin layer chromatographic method for a qualitative screening-test and a quantitative analysis of 2,4,6-TNT, biodegradation products, octogen and hexogen in ammunition wastes was developed using both polar and non-polar modified sorbents. For enrichment a solidphase extraction on LiChrolut® EN followed by removal with methanol/acetonitrile (11 v/v) was chosen. To imitate real samples, spiked tap water samples of known composition were used.     

Determination of polar pesticides with atmospheric pressure chemical ionisation mass spectrometry-mass spectrometry using methanol and/or acetonitrile for solid-phase desorption and gradient liquid chromatography

Thirty-seven polar pesticides, mainly triazines, phenylurea herbicides and phenoxy acids, were determined by LC-atmospheric pressure chemical ionisation MS-MS with methanol and acetonitrile as the organic modifiers. For most pesticides, detection limits were the same irrespective of the modifier. However, for the phenylurea herbicides, propachlor, carbetamide, triadimefon, triadimenol, triethylcitrate, benzothiazole and metazachlor, the results were much poorer in the presence of acetonitrile; in several cases, no meaningful results were obtained at all. When carrying out trace enrichment of 100 ml water samples on a 10x2 mm I.D. solid-phase extraction precolumn containing a polymeric sorbent, rapid desorption with a small volume of pure organic solvent and the introduction of a T-piece in between the solid-phase extraction precolumn and the analytical column was necessary. Aliquots of 300 microl of acetonitrile were optimal for the complete desorption of all analytes from the sorbent. With methanol as the modifier and when using an identification criterion of three ions, the detection limits for most analytes, in the full-scan mode, were 10-100 ng/l. The linearity of the procedure, which was tested at the 0.1 and 1 microg/l levels, was satisfactory in the positive, but not in the negative ionisation mode. The procedures were used to analyse surface water samples.     

Update on solid-phase extraction for the analysis of lipid classes and related compounds

This article provides information on the different procedures and methodologies developed when solid-phase extraction (SPE) is used for lipid component separation. The analytical systematics, established by different authors and designed to separate groups of compounds and also specific components by using a combination of chromatographic supports and solvents are presented. The review has been divided into three parts, which we consider well defined: edible fats and oils, fatty foods and biological samples. Separations of non-polar and polar lipids is the most extensive systematic, although many other published methods have been established to isolate specific components or a reduced number of components from edible fats and oils, fatty foods or biological samples susceptible to further analysis by other quantitative techniques.