A ferrocenyl-guanidine derivative as a highly selective electrochemical and colorimetric chemosensor molecule for acetate anions

A highly preorganized chemosensor molecule 1 based on a ferrocenyl-guanidine decorated with a chromogenic aryl azo moiety recognizes the acetate anion in acetonitrile solution. At first, receptor 1 underwent two-step oxidation events. Initially, oxidation of 1 occurs at the Fe(II) centre (E(p) = 440 mV) to form a ferrocenium species, followed by fast electron transfer from the guanidine moiety of the receptor to the Fe(III) centre with concomitant generation of an Fe(II) species with a radical cation centred at the nitrogen atom. In the second step, the radical cation species formed should undergo electrochemical oxidation at higher potential (E(p) = 830 mV). This assumption is supported by spectroelectrochemical studies. A remarkable cathodic shift (182 mV) of the ferrocene/ferrocenium oxidation peak (E(p) = 440 mV) and a progressive red-shift (Δλ = 30 nm) of the low energy band are observed in its absorption spectrum upon complexation of receptor 1 with the acetate anion. This change in the absorption spectrum is accompanied by a colour change from yellow to orange, which can be used for the "naked-eye" detection of this anion. Its monoprotonated form is able to selectively sense the less basic Cl(-), Br(-), NO(3)(-), and HSO(4)(-) anions: the oxidation redox peak at E(p) = 865 mV is cathodically shifted (107-182 mV).     

A family of diruthenium compounds with dianionic tridentate ligands of N-(2-pyridyl)-2-oxy-5-R-benzylaminate (R = H, Me, Cl, Br, NO(2)): isolation, structure determination, and electrochemistry

The ligand substitution reaction of Ru(2)(O(2)CCH(3))(4)Cl with 5-substituted N-(2-pyridyl)-2-oxy-5-R-benzylaminate (R = H, Me, Cl, Br, NO(2)) resulted in a family of anionic diruthenium species of [Ru(2)(O(2)CCH(3))(2)(R-salpy)(2)](-) that were isolated by using Na(+)- or K(+)-18-crown-6-ether as the countercation: [A(18-crown-6)(S)(x)()][Ru(2)(O(2)CCH(3))(2)(R-salpy)(2)] (A = Na(+), K(+); S = solvent; R = H, 1; Me, 2; Cl, 3; Br, 4; NO(2), 5). All compounds were structurally characterized by X-ray crystallography. The structural features of the anionic parts are very similar among the compounds: two acetate and two R-salpy(2)(-) ligands are, respectively, located around the Ru(2) unit in a trans fashion, where the R-salpy(2)(-) ligand acts as a tridentate ligand having both bridging and chelating characters to form the M-M bridging/axial-chelating mode. Compounds 1 and 5 with K(+)-18-crown-6-ether have one-dimensional chain structures, the K(+)-18-crown-6-ether interacting with phenolate oxygens of the [Ru(2)(O(2)CCH(3))(2)(R-salpy)(2)](-) unit to form a repeating unit, [.K.O-Ru-Ru-O.], whereas 2-4 are discrete. Cyclic voltammetry and differential pulse voltammetry revealed systematic redox activities based on the dimetal center and the substituted ligand, obeying the Hammett law with the reaction constants per substituent, rho, for the redox processes being 127 mV for Ru(2)(5+)/Ru(2)(4+), 185 mV for Ru(2)(6+)/Ru(2)(5+), 92 mV for Ru(2)(7+)/Ru(2)(6+), and 179 mV for R-salpy(-)/R-salpy(2)(-). For 3, the singly oxidized and reduced species, Ru(2)(6+) and Ru(2)(4+), respectively, generated by bulk controlled-potential electrolyses were finally monitored by spectroscopy. The singly oxidized species can also be slowly generated by air oxidation.     

Imidazolium-based macrocycles as multisignaling chemosensors for anions

A series of structurally novel anion receptors , , and in which a ferrocene unit and a fluorescent moiety are linked to two imidazolium rings have been designed and prepared from 1,1'-bis(imidazolylmethyl)ferrocene. Their crystal structures revealed that these receptors are capable of incorporating anions such as PF(6)(-) and Br(-). Consequently, the anion binding studies were carried out using various techniques including electrochemistry (CV and OSWV), fluorescence, UV-vis, and (1)H NMR spectroscopy. All the receptors showed a special electrochemical response to the F(-) anion with a remarkable cathodic shift of more than 260 mV and displayed a unique selectivity for F(-) and AcO(-) anions with fluorescence enhancement over various other anions of present interest (Cl(-), Br(-), I(-), HSO(4)(-), H(2)PO(4)(-)). In addition, for receptor , obvious absorption changes were observed when the H(2)PO(4)(-) anion was added while other anions (F(-), Cl(-), Br(-), I(-), AcO(-), HSO(4)(-)) showed only a minor influence on the UV-vis spectra. (1)H NMR titrations demonstrated that receptors and can bind anions through (C-H)(+)X(-) hydrogen bonds and showed strong affinity and high selectivity for the AcO(-) anion in acetonitrile.     

Synthesis and electrochemical studies of diiron complexes of 1,8-naphthyridine-based dinucleating ligands to model features of the active sites of non-heme diiron enzymes

A bis(mu-carboxylato)(mu-1,8-naphthyridine)diiron(II) complex, [Fe2(BPMAN)(mu-O2CPhCy)2](OTf)2 (1), was prepared by using the 1,8-naphthyridine-based dinucleating ligand BPMAN, where BPMAN = 2,7-bis[bis(2-pyridylmethyl)aminomethyl]-1,8-naphthyridine. The cyclic voltammogram (CV) of this complex in CH2Cl2 exhibited two reversible one-electron redox waves at +296 mV (DeltaE(p) = 80 mV) and +781 mV (DeltaE(p) = 74 mV) vs Cp2Fe+/Cp2Fe, corresponding to the FeIIIFeII/FeIIFeII and FeIIIFeIII/FeIIIFeII couples, respectively. This result is unprecedented for diiron complexes having no single atom bridge. Dinuclear complexes [Fe2(BPMAN)(mu-OH)(mu-O2CPhCy)](OTf)2 (2) and [Mn2(BPMAN)(mu-O2CPhCy)2](OTf)2 (3) were also synthesized and structurally characterized. The cyclic voltammogram of 2 in CH2Cl2 exhibited one reversible redox wave at -22 mV only when the potential was kept below +400 mV. The CV of 3 showed irreversible oxidation at potentials above +900 mV. Diiron(II) complexes [Fe2(BEAN)(mu-O2CPhCy)3](OTf) (4) and [Fe2(BBBAN)(mu-OAc)2(OTf)](OTf) (6) were also prepared and characterized, where BEAN = 2,7-bis(N,N-diethylaminomethyl)-1,8-naphthyridine and BBBAN = 2,7-bis[2-[2-(1-methyl)benzimidazolylethyl]-N-benzylaminomethyl]-1,8-naphthyridine. The cyclic voltammograms of these complexes were recorded. The M?ssbauer properties of the diiron compounds were studied.     

A more reactive trigonal-bipyramidal high-spin oxoiron(IV) complex with a cis-labile site

The trigonal-bipyramidal high-spin (S = 2) oxoiron(IV) complex [Fe(IV)(O)(TMG(2)dien)(CH(3)CN)](2+) (7) was synthesized and spectroscopically characterized. Substitution of the CH(3)CN ligand by anions, demonstrated here for X = N(3)(-) and Cl(-), yielded additional S = 2 oxoiron(IV) complexes of general formulation [Fe(IV)(O)(TMG(2)dien)(X)](+) (7-X). The reduced steric bulk of 7 relative to the published S = 2 complex [Fe(IV)(O)(TMG(3)tren)](2+) (2) was reflected by enhanced rates of intermolecular substrate oxidation.     

Anion binding to a ferric porphyrin complexed with per-O-methylated beta-cyclodextrin in aqueous solution

5,10,15,20-Tetrakis(4-sulfonatophenyl)porphinato iron(III) (Fe(III)TPPS) forms a very stable 1:2 complex with heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin (TMe-beta-CD), whose iron(III) center is located at a hydrophobic cleft formed by two face-to-face TMe-beta-CD molecules. Various inorganic anions (X(-)) such as F(-), Cl(-), Br(-), I(-), N(3)(-), and SCN(-) coordinate to Fe(III)TPPS(TMe-beta-CD)(2) to form five-coordinate high-spin Fe(III)TPPS(X)(TMe-beta-CD)(2), while no coordination occurs with ClO(4)(-), H(2)PO(4)(-), NO(3)(-), and HSO(4)(-). Except for F(-), none of the anions investigated coordinate to Fe(III)TPPS in the absence of TMe-beta-CD due to extensive hydration to the anions as well as to Fe(III)TPPS. The present system shows a high selectivity toward the N(3)(-) anion. The thermodynamics suggests that Lewis basicity, hydrophilicity, and shape of an X(-) anion are the main factors to determine the stability of the Fe(III)TPPS(X)(TMe-beta-CD)(2) complex.     

Synthesis and characterization of cobalt(II) complexes with tripodal polypyridine ligand bearing pivalamide groups. Selective formation of six- and seven-coordinate cobalt(II) complexes

The reactions of CoX(2) (X = Cl(-), Br(-), I(-) and ClO(4)(-)) with the tripodal polypyridine N(4)O(2)-type ligand bearing pivalamide groups, bis(6-(pivalamide-2-pyridyl)methyl)(2-pyridylmethyl)amine ligand (H(2)BPPA), afforded two types of Co(II) complexes as follows. One type is purple-coloured Co(II) complexes, [CoCl(2)(H(2)BPPA)] (1(Cl)) and [CoBr(2)(H(2)BPPA)] (1(Br)) which were prepared when X = Cl(-) and Br(-), respectively. The other type is pale pink-coloured Co(II) complexes, [Co(MeOH)(H(2)BPPA)](ClO(4)(-))(2) (2·(ClO(4)(-))(2)) and [Co(MeCN)(H(2)BPPA)](I(-))(2) (2·(I(-))(2)), which were obtained when X = I(-) and ClO(4)(-), respectively. From the reaction of 1(Cl) and NaN(3), a purple-coloured complex, [Co(N(3))(2)(H(2)BPPA)] (1(azide)), was obtained. These Co(II) complexes were characterized by X-ray structural analysis, IR and reflectance spectroscopies, and magnetic susceptibility measurements. All these Co(II) complexes were shown to be in a d(7) high-spin state based on magnetic susceptibility measurements. The former Co(II) complexes revealed a six-coordinate octahedron with one amine nitrogen, three pyridyl nitrogens, and two counter anions, and one coordinated anion, Cl(-), Br(-) and N(3)(-), forming intramolecular hydrogen bonds with two pivalamide N-H groups. On the other hand, the latter Co(II) complexes showed a seven-coordinate face-capped octahedron with one amine nitrogen, three pyridyl nitrogens, two pivalamide carbonyl oxygens and MeCN or MeOH. In these structures, intramolecular hydrogen bonding interaction was not observed, and the metal ion was coordinated by the pivalamide carbonyl oxygens and solvent molecule instead of the counter anions. The difference in coordination geometries might be attributable to the coordination ability and ionic radii of the counteranions; smaller strongly binding anions such as Cl(-), Br(-) and N(3)(-) gave the former complexes, whereas bulky weakly binding anions such as I(-) and ClO(4)(-) afforded the latter ones. In order to demonstrate this hypothesis, the small stronger coordinating ligand, azide, was added to complexes 2·(ClO(4)(-))(2) to obtain the dinuclear cobalt(II) complex in which two six-coordinate octahedral cobalt(II) species were bridged with azide, 3·(ClO(4)(-)). Also, the abstraction reaction of halogen anions from complexes 1(Cl) by AgSbF(6) gave a pale pink Co(II) complex assignable to 2·(SbF(6)(-))(2).     

New molecular assemblies of redox isomers, [CrIII(X4SQ)3-n(X4Cat)n]-n (X = Cl and Br; n = 0, 1, and 2), with metallocenium cations, [MIIICp2]+ (M = Co and Fe): X-ray crystal structures and physical properties

A series of redox isomers of [CrIII(X4SQ)(X4Cat)2]2-, [CrIII(X4SQ)2(X4Cat)]-, and [CrIII(X4SQ)3]0 (X = Cl and Br, SQ = semiquinonate, and Cat = catecholate) have been synthesized and characterized as charge-transfer (CT) compounds with metallocenium cations: (CoIIICp2)2[CrIII(Cl4SQ)(Cl4Cat)2] (1), (CoIIICp2)2[CrIII(Br4SQ)(Br4Cat)2] (2), (FeIIICp2)[CrIII(Cl4SQ)2(Cl4Cat)].C6H6 (4), (FeIIICp2)[CrIII(Br4SQ)2(Br4Cat)].CS2 (5), and (FeIIICp2)[CrIII(Cl4SQ)2(Cl4Cat)][CrIII(Cl4SQ)3] (6). First, the oxidation states of the chromium complexes are strongly dependent on the redox potentials of the metallocenes used. The CoIICp2, exhibiting stronger reduction power than FeIICp2, is useful for two-electron reduction of the [CrIII(X4SQ)3]0, affording [CrIII(X4SQ)(X4Cat)2]2- (1 and 2), which are first isolated and crystallographically characterized in the solid state. In contrast the reaction with FeIICp2 affords only [CrIII(X4SQ)2(X4Cat)]- (4 and 5). Second, solvents influence crystal structures of these compounds. The solvent set of C6H6/CS2 gives 1:1:C6H6 compound 4 with unique charged anions, [CrIII(Cl4SQ)2(Cl4Cat)]-, while the other set, n-C6H12/CS2, affords 1:2 compound 6 including the two redox isomers, [CrIII(Cl4SQ)2(Cl4Cat)]- and [CrIII(Cl4SQ)3]0. The [CrIII(X4SQ)(X4Cat)2]2- anions in 1 and 2 show no significant interconnection between them (discrete type), while the [CrIII(X4SQ)2(X4Cat)]- anions in 4-6 show one-dimensional column-type structures with the aid of intermolecular stacking interactions of the ligand moieties. The anions in 4 show additional stacking interaction with the [FeIIICp2]+ to form one-dimensional ...[D][A][S][D][A]... (D = [FeIIICp2]+, A = [CrIII(Cl4SQ)2(Cl4Cat)]-, and S = C6H6) type mixed-stack arrangements similar to that of previously reported (CoIIICp2)[CrIII(Cl4SQ)2(Cl4Cat)].C6H6 (3). Compound 6 forms a two-dimensional sheet structure where the two redox isomers, [CrIII(Cl4SQ)2(Cl4Cat)]- and [CrIII(Cl4SQ)3]0, are included. The sheet is regarded as a mixed-valence molecular assembly. Two types of the anions, [CrIII(X4SQ)(X4Cat)2]2- (1 and 2) and [CrIII(X4SQ)2(X4Cat)]- (4-6), exhibiting an intramolecular mixed-valence state, show intramolecular intervalence CT transition (IVCT) from the Cat to the SQ at near 5800 and 4300 cm-1, respectively, both in the solution and in the solid states. The intermolecular mixed-valence state of 6 was characterized by absorption spectroscopy, electric conductivity, and SQUID magnetometry. Interestingly, this mixed-valence state of the chromium module is dependent on the redox active nature of the coordinated ligands.     

Magnetic interactions in the high-spin iron(III) oxooctaethylchlorinato derivative [Fe(oxoOEC)(Cl)] and its pi-cation radical [Fe(oxoOEC.)(Cl)]SbCl6

The preparation and characterization of the beta-oxochlorin derivative [3,3,7,8,12,13,17,18-octaethyl-(3H)-porphin-2-onato(2-)]iron(III) chloride, [Fe(oxoOEC)(Cl)], and its pi-cation radical derivative [Fe(oxoOEC.)(Cl)]SbCl6 is described. Both compounds have been characterized by single-crystal X-ray structure determinations, IR, UV/vis/near-IR, and M?ssbauer spectroscopies, and temperature-dependent magnetic susceptibility measurements. The macrocycles of [Fe(oxoOEC)(Cl)] and [Fe(oxoOEC.)(Cl)]SbCl6 are both saddled, and [Fe(oxoOEC.)(Cl)]-SbCl6 is slightly ruffled as well. [Fe(oxoOEC)(Cl)] shows a laterally shifted dimeric unit in the solid state, with a mean plane separation of 3.39 A and a lateral shift of 7.39 A. Crystal data for [Fe(oxoOEC)(Cl)]: triclinic, space group P1, Z = 2, a = 9.174(2) A, b = 13.522(3) A, c = 14.838(3) A, alpha = 95.79(3) degrees, beta = 101.46(2) degrees, gamma = 104.84(3) degrees. Upon oxidation, the inter-ring geometric parameters increase; the mean plane separation and the lateral shift of the dimeric unit of [Fe(oxoOEC.)(Cl)]SbCl6 are 4.82 and 8.79 A, respectively. Crystal data for [Fe(oxoOEC.)(Cl)]SbCl6: monoclinic, space group Cc, Z = 4, a = 19.8419(13) A, b = 10.027(2) A, c = 22.417(4) A, beta = 96.13(2) degrees. A broad near-IR absorption band appears at 1415 nm for the pi-cation radical, [Fe(oxoOEC.)(Cl)]SbCl6. Zero-field M?ssbauer measurements at 4.2 K for both [Fe(oxoOEC)(Cl)] and [Fe(oxoOEC.)(Cl)]SbCl6 confirmed that the oxidation state of the iron atom did not change upon chemical oxidation. Solid-state magnetic susceptibility measurements for [Fe(oxoOEC.)(Cl)]SbCl6 resulted in a large temperature dependence of the magnetic moment that can best be fit with a model that includes a zero-field splitting parameter of D = 6 cm-1, antiferromagnetic intermolecular iron-iron coupling (2JFe-Fe = -0.14 cm-1), antiferromagnetic intramolecular iron-radical coupling (2JFe-r = -76 cm-1), and antiferromagnetic radical-radical coupling (2Jr-r = -13 cm-1).     

A theoretical investigation of the interactions between water molecules and ionic liquids

Quantum chemical calculations have been used to investigate the interaction between water molecules and ionic liquids based on the imidazolium cation with the anions [Cl(-)], [Br(-)], [BF(4)(-)], and [PF(6)(-)]. The predicted geometries and interaction energies implied that the water molecules interact with the Cl(-), Br(-), and BF(4)(-0 anions to form X(-)...W (X = Cl or Br, W = H(2)O), 2X-...2W, BF(4)(-)...W, and W...BF(4)(-)...W complexes. The hydrophobic PF(6)(-) anion could not form a stable complex with the water molecules at the density functional theory (DFT) level. Further studies indicate that the cation could also form a strong interaction with the water molecules. The 1-ethyl-3-methylimidazolium cation (Emim(+)) has been used as a model cation to investigate the interaction between a water molecule and a cation. In addition, the interaction between the ion pairs and the water was studied by using 1-ethyl-3-methylimidazolium chloride (Emim x Cl) as a model ionic liquid. The strengths of the interactions in these categories follow the trend anion-W > cation-W > ion pair-W.     

Picosecond pulse radiolysis of direct and indirect radiolytic effects in highly concentrated halide aqueous solutions

Recently we measured the amount of the single product, Br(3)(-), of steady-state radiolysis of highly concentrated Br(-) aqueous solutions, and we showed the effect of the direct ionization of Br(-) on the yield of Br(3)(-). Here, we report the first picosecond pulse-probe radiolysis measurements of ionization of highly concentrated Br(-) and Cl(-) aqueous solutions to describe the oxidation mechanism of the halide anions. The transient absorption spectra are reported from 350 to 750 nm on the picosecond range for halide solutions at different concentrations. In the highly concentrated halide solutions, we observed that, due to the presence of Na(+), the absorption band of the solvated electron is shifted to shorter wavelengths, but its decay, taking place during the spur reactions, is not affected within the first 4 ns. The kinetic measurements in the UV reveal the direct ionization of halide ions. The analysis of pulse-probe measurements show that after the electron pulse, the main reactions in solutions containing 1 M of Cl(-) and 2 M of Br(-) are the formation of ClOH(-?) and BrOH(-?), respectively. In contrast, in highly concentrated halide solutions, containing 5 M of Cl(-) and 6 M of Br(-), mainly Cl(2)(-?) and Br(2)(-?) are formed within the electron pulse without formation of ClOH(-?) and BrOH(-?). The results suggest that, not only Br(-) and Cl(-) are directly ionized into Br(?) and Cl(?) by the electron pulse, the halide atoms can also be rapidly generated through the reactions initiated by excitation and ionization of water, such as the prompt oxidation by the hole, H(2)O(+?), generated in the coordination sphere of the anion.     

Sequential oxidation of the cubane [4Fe--4S] cluster from [4Fe--4S](-) to [4Fe--4S](3+) in Fe(4)S(4)L(n)(-) complexes

Gaseous Fe(4)S(n)(-) (n = 4-6) clusters and synthetic analogue complexes, Fe(4)S(4)L(n)(-) (L = Cl, Br, I; n = 1-4), were produced by laser vaporization of a solid Fe/S target and electrospray from solution samples, respectively, and their electronic structures were probed by photoelectron spectroscopy. Low binding energy features derived from minority-spin Fe 3d electrons were clearly distinguished from S-derived bands. We showed that the electronic structure of the simplest Fe(4)S(4)(-) cubane cluster can be described by the two-layer spin-coupling model previously developed for the [4Fe] cubane analogues. The photoelectron data revealed that each extra S atom in Fe(4)S(5)(-) and Fe(4)S(6)(-) removes two minority-spin Fe 3d electrons from the [4Fe--4S] cubane core and each halogen ligand removes one Fe 3d electron from the cubane core in the Fe(4)S(4)L(n)(-) complexes, clearly revealing a behavior of sequential oxidation of the cubane over five formal oxidation states: [4Fe--4S](-) --> [4Fe--4S](0) --> [4Fe--4S](+) --> [4Fe-4S](2+) --> [4Fe-4S](3+). The current work shows the electron-storage capability of the [4Fe--4S] cubane, contributes to the understanding of its electronic structure, and further demonstrates the robustness of the cubane as a structural unit and electron-transfer center.     

Electronic structures of ruthenium and osmium complexes of 9,10-phenanthrenequinone

The reaction of 9,10-phenanthrenequinone (PQ) with [M(II)(H)(CO)(X)(PPh(3))(3)] in boiling toluene leads to the homolytic cleavage of the M(II)-H bond, affording the paramagnetic trans-[M(PQ)(PPh(3))(2)(CO)X] (M = Ru, X = Cl, 1; M = Os, X = Br, 3) and cis-[M(PQ)(PPh(3))(2)(CO)X] (M = Ru, X = Cl, 2; M = Os, X = Br, 4) complexes. Single-crystal X-ray structure determinations of 1, 2·toluene, and 4·CH(2)Cl(2), EPR spectra, and density functional theory (DFT) calculations have substantiated that 1-4 are 9,10-phenanthrenesemiquinone radical (PQ(?-)) complexes of ruthenium(II) and osmium(II) and are defined as trans-[Ru(II)(PQ(?-))(PPh(3))(2)(CO)Cl] (1), cis-[Ru(II)(PQ(?-))(PPh(3))(2)(CO)Cl] (2), trans-[Os(II)(PQ(?-))(PPh(3))(2)(CO) Br] (3), and cis-[Os(II)(PQ(?-))(PPh(3))(2)(CO)Br] (4). Two comparatively longer C-O [average lengths: 1, 1.291(3) ?; 2·toluene, 1.281(5) ?; 4·CH(2)Cl(2), 1.300(8) ?] and shorter C-C lengths [1, 1.418(5) ?; 2·toluene, 1.439(6) ?; 4·CH(2)Cl(2), 1.434(9) ?] of the OO chelates are consistent with the presence of a reduced PQ(?-) ligand in 1-4. A minor contribution of the alternate resonance form, trans- or cis-[M(I)(PQ)(PPh(3))(2)(CO)X], of 1-4 has been predicted by the anisotropic X- and Q-band electron paramagnetic resonance spectra of the frozen glasses of the complexes at 25 K and unrestricted DFT calculations on 1, trans-[Ru(PQ)(PMe(3))(2)(CO)Cl] (5), cis-[Ru(PQ)(PMe(3))(2)(CO)Cl] (6), and cis-[Os(PQ)(PMe(3))(2)(CO)Br] (7). However, no thermodynamic equilibria between [M(II)(PQ(?-))(PPh(3))(2)(CO)X] and [M(I)(PQ)(PPh(3))(2)(CO)X] tautomers have been detected. 1-4 undergo one-electron oxidation at -0.06, -0.05, 0.03, and -0.03 V versus a ferrocenium/ferrocene, Fc(+)/Fc, couple because of the formation of PQ complexes as trans-[Ru(II)(PQ)(PPh(3))(2)(CO)Cl](+) (1(+)), cis-[Ru(II)(PQ)(PPh(3))(2)(CO)Cl](+) (2(+)), trans-[Os(II)(PQ)(PPh(3))(2)(CO)Br](+) (3(+)), and cis-[Os(II)(PQ)(PPh(3))(2)(CO)Br](+) (4(+)). The trans isomers 1 and 3 also undergo one-electron reduction at -1.11 and -0.96 V, forming PQ(2-) complexes trans-[Ru(II)(PQ(2-))(PPh(3))(2)(CO)Cl](-) (1(-)) and trans-[Os(II)(PQ(2-))(PPh(3))(2)(CO)Br](-) (3(-)). Oxidation of 1 by I(2) affords diamagnetic 1(+)I(3)(-) in low yields. Bond parameters of 1(+)I(3)(-) [C-O, 1.256(3) and 1.258(3) ?; C-C, 1.482(3) ?] are consistent with ligand oxidation, yielding a coordinated PQ ligand. Origins of UV-vis/near-IR absorption features of 1-4 and the electrogenerated species have been investigated by spectroelectrochemical measurements and time-dependent DFT calculations on 5, 6, 5(+), and 5(-).     

Novel chelate ring-opening induced by silver(I) of five-coordinate palladium(II) and platinum(II) complexes containing tripodal polyphosphines

The ionic complexes [Pd(NP 3)X]X [NP 3 = tris[2-(diphenylphosphino)ethyl]amine, X = Cl (1), Br(2)] and [M(PP 3)X]X [PP 3 = tris[2-(diphenylphosphino)ethyl]phosphine, M = Pd, X = Cl (3), Br(4); M = Pt, X = Cl (5), Br (6)] contain square pyramidal (1, 2) and trigonal bipyramidal (3- 6) cations with three fused chelate rings to M and one M-X bond. By addition of AgX salts (X = Cl, Br, NO 3) an unexpected ring-opening reaction occurs with formation of the heteronuclear species PdAg(NP 3)X 3 [X = Cl (7), Br (8)], MAg(PP 3)X 3 [M = Pd, X = Cl (9), Br (10), NO 3 (13);M = Pt, X = Cl (11), Br (12), NO 3 (14)]. The complexes have been characterized in the solid state and solution. The X-ray crystal structures of 9 and 13 reveal a distorted square-planar arrangement to Pd(II) that is coordinated to three P of PP 3 (the central and two terminal atoms) and to one chloride (9) or one oxygen atom of NO 3 (13). The resultant dangling phosphorus of the ring opening is bound to Ag(I) that completes the three- [PAgCl 2 ( 9)] and four-coordination [PAg(ONO 2)(O 2NO) (13)] through the donor atoms of the anions with the nitrates in 13 unusually acting as both mono- and bidentate ligands. Complexes 7, 8, 10, and 11 undergo oligomerization in solution. Complex 10 oligomerizes giving rise to the ionic compound [Pd 4Ag 2(PP 3) 2 Br 9]Br ( 10a) whose X-ray crystal structure indicates the presence of cations with a Pd(mu-Br) 3Pd unit that connects via bromide bridges two BrPdP 2PPAg Br 2 fragments containing distorted square-planar and trigonal-planar Pd(II) and Ag(I) centers, respectively. The palladium(II) metal centers in the central unit afford the five-coordination (PdBr 5) with a distorted trigonal bipyramidal geometry. The ionic system [Pt 2Ag 2(PP 3) 2 Cl 5]Cl (11a) consists of chloride anions and heteronuclear monocations. The X-ray crystal structure reveals that the cations contain two distorted square-planar ClPtP 3 units bridged by one PAgCl(mu-Cl) 2AgP fragment that is bearing tetrahedral (PAgCl 3) and trigonal planar PAgCl 2 silver(I) centers. Further additions of the corresponding AgX salts to complexes 7- 14 did not give rise to any new ring-opening reaction.     

Probing the Presence of Multiple Metal-Metal Bonds in Technetium Chlorides by X-ray Absorption Spectroscopy: Implications for Synthetic Chemistry

The cesium salts of [Tc(2)X(8)](3-) (X = Cl, Br), the reduction product of (n-Bu(4)N)[TcOCl(4)] with (n-Bu(4)N)BH(4) in THF, and the product obtained from reaction of Tc(2)(O(2)CCH(3))(4)Cl(2) with HCl(g) at 300 °C have been characterized by extended X-ray absorption fine structure (EXAFS) spectroscopy. For the [Tc(2)X(8)](3-) anions, the Tc-Tc separations found by EXAFS spectroscopy (2.12(2) ? for both X = Cl and Br) are in excellent agreement with those found by single-crystal X-ray diffraction (SCXRD) measurements (2.117[4] ? for X = Cl and 2.1265(1) ? for X = Br). The Tc-Tc separation found by EXAFS in these anions is slightly shorter than those found in the [Tc(2)X(8)](2-) anions (2.16(2) ? for X = Cl and Br). Spectroscopic and SCXRD characterization of the reduction product of (n-Bu(4)N)[TcOCl(4)] with (n-Bu(4)N)BH(4) are consistent with the presence of dinuclear species that are related to the [Tc(2)Cl(8)](n-) (n = 2, 3) anions. From these results, a new preparation of (n-Bu(4)N)(2)[Tc(2)Cl(8)] was developed. Finally, EXAFS characterization of the product obtained from reaction of Tc(2)(O(2)CCH(3))(4)Cl(2) with HCl(g) at 300 °C indicates the presence of amorphous α-TcCl(3). The Tc-Tc separation (i.e., 2.46(2) ?) measured in this compound is consistent with the presence of Tc═Tc double bonds in the [Tc(3)](9+) core.     

Synthesis, characterization, and study of octanuclear iron-oxo clusters containing a redox-active Fe4O4-cubane core

A one-pot synthetic procedure yields the octanuclear Fe(III) complexes Fe(8)(micro(4-)O)(4)(micro-pz(*))(12)X(40, where X = Cl and pz(*) = pyrazolate anion (pz = C(3)H(3)N(2)-) (1), 4-Cl-pz (2), and 4-Me-pz (3) or X = Br and pz(*) = pz (4). The crystal structures of complexes 1-4, determined by X-ray diffraction, show an Fe(4)O(4)-cubane core encapsulated in a shell composed of four interwoven Fe(micro-pz(*))(3)X units. Complexes 1-4 have been characterized by 1H NMR, infrared, and Raman spectroscopies. M?ssbauer spectroscopic analysis distinguishes the cubane and outer Fe(III) centers by their different isomer shift and quadrupole splitting values. Electrochemical analyses by cyclic voltammetry show four consecutive, closely spaced, reversible reduction processes for each of the four complexes. Magnetic susceptibility studies, corroborated by density functional theory calculations, reveal weak antiferromagnetic coupling among the four cubane Fe centers and strong antiferromagnetic coupling between cubane and outer Fe atoms of 1. The structural similarity between the antiferromagnetic Fe(8)(micro(4-)O)(4) core of 1-4 and the antiferromagnetic units contained in the minerals ferrihydrite and maghemite is demonstrated by X-ray and M?ssbauer data.     

Tuning of the [Cu3(mu-O)]4+/5+ redox couple: spectroscopic evidence of charge delocalization in the mixed-valent [Cu3(mu-O)]5+ species

Trinuclear Cu (II)-complexes of formula [Cu (II) 3(mu 3-E)(mu-4-R-pz) 3X 3] (+/- n ), E = O and OH; R = H, Cl, Br, CH(O) and NO 2; X = Cl, NCS, CH 3COO, and py, have been synthesized and characterized and the effect of substitution of terminal ligands, as well as 4-R-groups, in the one-electron oxidation process has been investigated by cyclic voltammetry. In situ UV-vis-NIR spectroelectrochemical characterization of the mixed valence Cu 3 (7+)-complex [Cu 3(mu 3-O)(mu-pz) 3Cl 3] (-) revealed an intervalence charge transfer band at 9550 cm (-1) (epsilon = 2600 cm (-1) M (-1)), whose analysis identifies this species as a delocalized, Robin-Day class-III system, with an electronic coupling factor, H ab, of 4775 cm (-1).     

The radical trap in atom transfer radical polymerization need not be thermodynamically stable. A study of the MoX(3)(PMe(3))(3) catalysts

The molybdenum(III) coordination complexes MoX(3)(PMe(3))(3) (X = Cl, Br, and I) are capable of controlling styrene polymerization under typical atom transfer radical polymerization (ATRP) conditions, in conjunction with 2-bromoethylbenzene (BEB) as an initiator. The process is accelerated by the presence of Al(OPr(i))(3) as a cocatalyst. Electrochemical and synthetic studies aimed at identifying the nature of the spin trap have been carried out. The cyclic voltammogram of MoX(3)(PMe(3))(3) (X = Cl, Br, I) shows partial reversibility (increasing in the order Cl < Br < I) for the one-electron oxidation wave. Addition of X(-) changes the voltammogram, indicating the formation of MoX(4)(PMe(3))(3) for X = Cl and Br. On the other hand, I(-) is more easily oxidized than the MoI(3)(PMe(3))(3) complex; thus, the putative MoI(4)(PMe(3))(3) complex is redox unstable. Electrochemical studies of MoI(3)(PMe(3))(3) in the presence of X(-) (X = Cl or Br) reveal the occurrence of facile halide-exchange processes, leading to the conclusion that the MoI(3)X(PMe(3))(3) products are also redox unstable. The oxidation of MoX(3)(PMe(3))(3) with (1)/(2)Br(2) yields MoX(3)Br(PMe(3))(3) (X = Cl, Br), whose molecular nature is confirmed by single-crystal X-ray analyses. On the other hand, the oxidation of MoI(3)(PMe(3))(3) by I(2) slowly yields a tetraiodomolybdate(III) salt of iodotrimethylphosphonium, [Me(3)PI][MoI(4)(PMe(3))(3)], as confirmed by an X-ray study. This product has no controlling ability in radical polymerization. The redox instability of MoI(3)X(PMe(3))(3) can be reconciled with its involvement as a radical trapping species in the MoI(3)(PMe(3))(3)-catalyzed ATRP, given the second-order nature of its decomposition rate.     

Reactivity of iron(II) 5,10,15,20-tetraaryl-21-oxaporphyrin with arylmagnesium bromide: formation of paramagnetic six-coordinate complexes with two axial aryl groups

Coordination of sigma-aryl carbanions by chloroiron(II) 5,20-ditolyl-10,15-diphenyl-21-oxaporphyrin (ODTDPP)Fe(II)Cl has been followed by (1)H NMR spectroscopy. Addition of pentafluorophenyl Grignard reagent (C(6)F(5))MgBr to the toluene solution of (ODTDPP)Fe(II)Cl in the absence of dioxygen at 205 K resulted in the formation of the high-spin (ODTDPP)Fe(II)(C(6)F(5)). The titration of (ODTDPP)Fe(II)Cl with a solution of (C(6)H(5))MgBr carried at 205 K yields a rare six-coordinate species which binds two sigma-aryl ligands [(ODTDPP)Fe(II)(C(6)H(5))(2)](-). Warming of the [(ODTDPP)Fe(II)(C(6)H(5))(2)](-) solution above 270 K results in the decomposition to mono-sigma-phenyliron species (ODTDPP)Fe(II)(C(6)H(5)). Controlled oxidation of [(ODTDPP)Fe(II)(C(6)H(5))(2)](-) with Br(2) affords (ODTDPP)Fe(III)(C(6)H(5))Br, which demonstrates a typical (1)H NMR pattern of low-spin sigma-aryl iron(III) porphyrin. The considered oxidation mechanism involves the (ODTDPP)Fe(III)(C(6)H(5))(2) species, which is readily reduced to the iron(I) 21-oxaporphyrin, followed by oxidation with Br(2) and replacement of one bromide anion by aryl substituent. The (1)H NMR spectra of paramagnetic iron complexes have been examined in detail. Functional group assignments have been made with the use of selective deuteration. The peculiar (1)H NMR spectral features of [(ODTDPP)Fe(II)(p-CH(3)C(6)H(4))(2)](-) (sigma-p-tolyl: ortho, 30.8; meta, 53.6; para-CH(3), 42.1; furan: -16.0; beta-H pyrrole: -27.5, -34.3, -41.8 ppm, at 205 K) are without a parallel to any iron(II) porphyrin or heteroporphyrin and indicate a profound alteration of the electronic structure of iron(II) porphyrin upon the coordination of two sigma-aryls.     

Tuning redox potentials of bis(imino)pyridine cobalt complexes: an experimental and theoretical study involving solvent and ligand effects

The structure and electrochemical properties of a series of bis(imino)pyridine Co(II) complexes (NNN)CoX(2) and [(NNN)(2)Co][PF(6)](2) (NNN = 2,6-bis[1-(4-R-phenylimino)ethyl]pyridine, with R = CN, CF(3), H, CH(3), OCH(3), N(CH(3))(2); NNN = 2,6-bis[1-(2,6-(iPr)(2)-phenylimino)ethyl]pyridine and X = Cl, Br) were studied using a combination of electrochemical and theoretical methods. Cyclic voltammetry measurements and DFT/B3LYP calculations suggest that in solution (NNN)CoCl(2) complexes exist in equilibrium with disproportionation products [(NNN)(2)Co](2+) [CoCl(4)](2-) with the position of the equilibrium heavily influenced by both the solvent polarity and the steric and electronic properties of the bis(imino)pyridine ligands. In strong polar solvents (e.g., CH(3)CN or H(2)O) or with electron donating substituents (R = OCH(3) or N(CH(3))(2)) the equilibrium is shifted and only oxidation of the charged products [(NNN)(2)Co](2+) and [CoCl(4)](2-) is observed. Conversely, in nonpolar organic solvents such as CH(2)Cl(2) or with electron withdrawing substituents (R = CN or CF(3)), disproportionation is suppressed and oxidation of the (NNN)CoCl(2) complexes leads to 18e(-) Co(III) complexes stabilized by coordination of a solvent moiety. In addition, the [(NNN)(2)Co][PF(6)](2) complexes exhibit reversible Co(II/III) oxidation potentials that are strongly dependent on the electron withdrawing/donating nature of the N-aryl substituents, spanning nearly 750 mV in acetonitrile. The resulting insight on the regulation of redox properties of a series of bis(imino)pyridine cobalt(II) complexes should be particularly valuable to tune suitable conditions for reactivity.