Destabilized carbenium ions: α-carbomethoxy-α,α-dimethyl-methyl cations

Tertiary α-carbomethoxy-α,α-dimethyl-methyl cations a have been generated by electron impact induced fragmentation from the appropriately α-substituted methyl isobutyrates 1–4. The destabilized carbenium ions a can be distinguished from their more stable isomers protonated methyl methacrylate c and protonated methyl crotonate d by MIKE and CA spectra. The loss of I^— and Br˙ from the molecular ions of 1 and 2, respectively, predominantly gives rise to the destabilized ions a, whereas loss of Cl˙ from [3]^{+ ˙} results in a mixture of ions a and c. The loss of CH₃˙ from [4]⁺˙ favours skeletal rearrangement leading to ions d. The characteristic reactions of the destabilized ions a are the loss of CO and elimination of methanol. The loss of CO is associated by a very large KER and non-statistical kinetic energy release (T₅₀ = 920 meV). Specific deuterium labelling experiments indicate that the α-carbomethoxy-α,α-dimethyl-methyl cations a rearrange via a 1,4-H shift into the carbonyl protonated methyl methacrylate c and eventually into the alkyl-O protonated methyl methacrylate before the loss of methanol. The hydrogen rearrangements exhibit a deuterium isotope effect indicating substantial energy barriers between the [C₅H₉O₂]⁺ isomers. Thus the destabilized carbenium ion a exists as a kinetically stable species within a potential energy well.     

Heterocyclen aus α-nitroolefinen. XI . 1,2-oxazine aus α-nitroolefinen und β-dicarbonylverbindungen

Dihydro-1,2-oxazines 8 and 12-oxazines 12 are formed by the reaction of the nitronic acids of the adducts of α-nitroolefins and β-dicarbonyl compounds ( 6 ) by two ways: A ) The nitronic acids 6 are heated in a boiling solution of urea in ethanol or methanol. B ) The nitronic acids 6 are reduced with an aqueous solution of ammoniachloride and sodium sulfide. ¹H-nmr and ¹³C-nmr investigations prove the constitutions. The mechanism is discussed.     

Polymerization studies on allylic compounds. III. α(substituted methyl)styrenes

The free-radical polymerization of a series of α-(substituted methyl)styrenes was investigated. These compounds were found to be inactive in homopolymerizations but copolymerized with methyl methacrylate and styrene with a retarding effect. Copolymerization characteristics were followed by rate and viscosity measurements.     

Introduction of 2-methoxycarbonylallyl end group by copolymerization of methyl α-(phenoxymethyl)acrylate accompanying with addition-fragmentation reaction

Copolymerizations of methyl α-(phenoxymethyl)acrylate (MPMA) with methyl acrylate, methyl methacrylate, styrene, and methyl α-ethylacrylate were carried out. Addition of a polymer radical to MPMA followed by the subsequent fragmentation of poly(MPMA) radical resulted in the 2-methoxycarbonylallyl end group and phenoxy radical in the course of the copolymerization. The extent of the fragmentation determined by ¹H-NMR spectroscopy depends on reactivity of the MPMA radical toward the reference monomers. An increase in the addition rate of the MPMA radical to the reference monomer brought about suppression of the fragmentation. The addition of the MPMA radical to styrene seems to be sufficiently fast to prevent the fragmentation. Since the rate of the fragmentation relative to the propagation was considerably accelerated by raising the temperature to 110°C, MPMA can be used as a novel chain transfer agent to control molecular weight and end group at a temperature above 100°C. © 1993 John Wiley & Sons, Inc.     

Preparation of polymers with substituted allyl end group using dimer of α-methylvinyl monomer as addition fragmentation chain transfer agent at high temperatures

The dimerization of methyl methacrylate, ethyl methacrylate, methacrylonitrile, and α-methylstyrene to 2-substituted-1-allylic compounds [CH₂?C(X)CH₂C(CH₃)₂X] (X = COOR, C₆H₅, or CN), and methyl α-ethylacrylate to a 3-substituted-2-allylic compound [CH₃CH?C(COOCH₃)CH₂C(CH₃)(C₂H₅) COOCH₃] was carried out by catalytic chain transfer using benzylbis (dimethylglyoximato) (pyridine) cobalt (III). These dimers were then used as addition-fragmentation chain transfer agents in the polymerizations of methyl methacrylate and styrene at 80⁰C or above. Cross-dimers from methacrylic ester-α-methylstyrene and methacrylonitrile-α-methylstyrene mixtures were similarly prepared. Except for those from methyl α-ethylacrylate and methacrylonitrile, all the dimers participated in the addition-fragmentation and the copolymerization to different extents. The dimer of methyl α-ethylacrylate was actually inactive during the styrene and methyl methacrylate polymerizations. The methacrylonitrile dimer was primarily incorporated in the polymer chain through copolymerization. Among the dimer and the cross-dimers from α-methylstyrene with the other monomers, those bearing the α-methylstyrene moiety in the α-substituent [CH₂?C(X)CH₂C(CH₃)₂C₆H₅, X?COOCH₃, COOC₂H₅, and CN] are noted as highly reactive chain transfer agents. © 1994 John Wiley & Sons, Inc.     

Mass spectra of some α-substituted phenyl-α,α′-dimethoxyl ketones and their derivatives

The mass spectra of some α-substituted phenyl-α,α′-dimethoxyl ketones (compounds 1) and their 2,4-dinitrophenylhydrazones (compounds 2) and semicarbazones (compounds 3) have been studied. The characteristic fragments at m/z (M ? 73) from compounds 1, m/z (M ? 253) from compounds 2 and m/z (M ? 130) from compounds 3 are abundant and proposed to be [ArCROCH₃]⁺. Fragmentations yielding [M⁺ ? 49] from compounds 2 are abnormal and probably involve the methoxyl and nitro groups. The intense peak at m/z 130 due to [CH₃OCH₂CNNHCONH₂]⁺ from compounds 3 corresponds to α-cleavage of the molecular ion. Some other fragments from these new compounds are interpreted in this paper.     

Thermische Lactonisierung von Estern γ-Brom-α, β-ungesättigter Carbonsäuren zu Δα-Butenoliden. Direkte γ-Bromierung von α, β-ungesättigten Säuren

By heating with iron powder at 120–150° some γ-bromo-α, β-unsaturated carboxylic methyl esters, and, less smothly, the corresponding acids, were lactonized to Δ^7alpha;-butenolides with elimination of methyl bromide. The following conversions have thus been made: methyl γ-bromocrotonate ( 1c ) and the corresponding acid ( 1d ) to Δ^α-butenolide ( 8a ), methyl γ-bromotiglate ( 3c ) and the corresponding acid ( 3d ) to α-methyl-Δ^α-butenolide ( 8b ), a mixture of methyl trans- and cis-γ-bromosenecioate ( 7c and 7e ) and a mixture of the corresponding acids ( 7d and 7f ) to β-methyl-Δ^α-butenolide ( 8c ). The procedure did not work with methyl trans-γ-bromo-Δ^α-pentenoate ( 5c ) nor with its acid ( 5d ). Most of the γ-bromo-α, β-unsaturated carboxylic esters ( 1c, 7c, 7e and 5c ) are available by direct N-bromosuccinimide bromination of the α, β-unsaturated esters 1a, 7a and 5a ; methyl γ-bromotiglate ( 3c ) is obtained from both methyl tiglate ( 3a ) and methyl angelate ( 4a ), but has to be separated from a structural isomer. The γ-bromo-α, β-unsaturated esters are shown by NMR. to have the indicated configurations which are independent of the configuration of the α, β-unsaturated esters used; the bromination always leads to the more stable configuration, usually the one with the bromine-carrying carbon anti to the carboxylic ester group; an exception is methyl γ-bromo-senecioate, for which the two isomers (cis, 7e , and trans, 7d ) have about the same stability. The N-bromosuccinimide bromination of the α,β-unsaturated carboxylic acids 1b , 3b , 4b , 5b and 7b is shown to give results entirely analogous to those with the corresponding esters. In this way γ-bromocrotonic acid ( 1 d ), γ-bromotiglic acid ( 3 d ), trans- and cis-γ-bromosenecioic acid ( 7d and 7f ) as well as trans-γ-bromo-Δ^α-pentenoic acid ( 5d ) have been prepared. Iron powder seems to catalyze the lactonization by facilitating both the elimination of methyl bromide (or, less smoothly, hydrogen bromide) and the rotation about the double bond. α-Methyl-Δ^α-butenolide ( 8b ) was converted to 1-benzyl-( 9a ), 1-cyclohexyl-( 9b ), and 1-(4′-picoly1)-3-methyl-Δ^α-pyrrolin-2-one ( 9 c ) by heating at 180° with benzylamine, cyclohexylamine, and 4-picolylamine. The butenolide 8b showed cytostatic and even cytocidal activity; in preliminary tests, no carcinogenicity was observed. Both 8b and 9c exhibited little toxicity.     

Polymerization and copolymerization of α-alkylacrylic acids and characterization of their polymers

α-Alkylacrylic acids (RAA's) bearing n-alkyl groups were found to homopolymerize with slower rates than acrylic and methacrylic acids to number-average molecular, weight (M?_n) of 10⁴ or above. When the α-substituent was a branched alkyl group, the polymerization rate and M?_n decreased further. Reactivities of RAA's in copolymerization were interpreted by steric and resonance effects of the alkyl group using Hancock's steric substituent constant. Comparison of the reactivities of RAA's with those of methyl α-alkylacrylates revealed that replacement with the smaller carboxyl group facilitates polymerization and copolymerization. Preference of co-syndiotactic propagation in the copolymerization of methacrylic acid with styrene changed to random fashion in the copolymerization of the α-higher alkyl derivatives. After methylation with diazomethane, the homopolymers were shown to be thermally less stable than poly(methyl methacrylate). T_g's of poly(methyl α-ethylacrylate) and poly(methyl α-n-propylacrylate) were 57 and 25°C, respectively.     

Sodium hydride-initiated polymerizations of vinyl monomers in aprotic solvents

Polymerizations of several vinyl monomers at 25°C in aprotic solvents (dimethyl sulfoxide, N,N-dimethylacetamide, and hexamethylphosphoric triamide) using sodium hydride dispersion as initiator yield low to intermediate molecular weight polymers. The molecular weight of the resulting polymer as well as the mode of initiation depends on the monomer and aprotic solvent used. Initiation of polymerization of monomers with available α hydrogens (methyl acrylate, acrylonitrile) involves monomer anion, while initiation of a monomer with no α hydrogen (methyl methacrylate) proceeds by a more complex mechanism. In contrast, initiation of styrene and α-methylstyrene proceeds by dimsyl anion addition to monomer in dimethylsulfoxide. Although the triad tacticities and number-average molecular weights of poly(methyl methacrylate) samples obtained from all three aprotic solvents are nearly the same, poly(methyl methacrylates) prepared in dimethyl sulfoxide and N,N-dimethylacetamide give polymers having polydispersities of ～3, while a very polydisperse polymer is obtained in hexamethylphosphoric triamide.     

Terpolymerization studies. III. Terpolymerization of acrylonitrile,styrene, and α-cyanocinnamamide

Acrylonitrile (M₁), styrene (M₂), and α-cyanocinnamamide (α-CCA) (M₃) were terpolymerized by thermal initiation to low conversion, and the monomer feed/terpolymer composition relationship was determined by Slocombe's triangular graph. The solubility, the thermal behavior, the impact strength, and the chemical resistance of the terpolymers of various compositions were investigated.     

Polymerization of α,α-disubstituted β-propiolactones and lactams. VII. Stereoregular polymers from optically active lactones

Optically active α-phenyl-ααethyl-β-propiolactone of high optical purity was prepared and polymerized by homogeneous anionic initiation to the isotactic polyester. The racemic and isotactic polymers had apparently different crystalline properties suggesting that the former may be syndiotactic or may crystallize with unit cells containing both R and S blocks. Similar attempts to prepare α-methyl-α-isopropyl-β-propiolactone of high optical purity were unsuccessful although a partially crystalline polymer was obtained from the racemic monomer.     

Cobalt complex bearing β‐ketoamine ligand: syntheses,structure, catalytic behavior for styrene and methyl methacrylate polymerization

Cobalt complex based on β‐ketoamine ligand [(Z)‐4‐((2,5‐dimethylphenylamino) (phenyl)methylene)‐3‐methyl‐1‐phenyl‐1H‐pyrazol‐5(4H)‐one] was successfully synthesized. The produced catalyst showed satisfactory activities in the cobalt‐mediated radical polymerization of styrene and methyl methacrylate with the common initiator of AIBN. The resulting polymerizations have the characteristics of living radical polymerization and displayed a nearly linear correlation between the number‐average molecular weight and monomer conversion. Low polydispersity was obtained for all polymerizations, and the polydispersity index decreased with the increase of conversion. These improvements facilitate the implementation of styrene and methacrylate cobalt‐mediated radical polymerization, and open the door to the scale‐up of the process. Copyright © 2014 John Wiley & Sons, Ltd.     

Simulation of Potentially Possible Reactions at the Initial Stages of Free-Radical Polymerization of Styrene and Methyl Methacrylate in the Presence of Fullerene C<Superscript>60</Superscript>

The quantum-chemical simulation of possible reactions occurring at the initial stage of the free-radical polymerizations of styrene and methyl methacrylate in the presence of fullerene C⁶⁰ is performed. The reactions of interaction between initiating and model short-chain growing radicals containing from one to three monomer units with fullerene are considered. It is shown that, at the initial stage of styrene polymerization, the addition of short-chain growing radicals to fullerene predominates (with respect to the reaction of chain propagation). In the case of methyl methacrylate polymerization in the presence of fullerene C⁶⁰, the induction period is absent because of a higher probability of the initiation and chain propagation reactions (compared with the chain-termination reaction of short growing poly(methyl methacrylate) chains on fullerene C⁶⁰). The formation of bis- and trisadducts of fullerene C⁶⁰ with short-chain styrene and methyl methacrylate growing radicals is analyzed. The quantum-chemical simulation results are confirmed by electron spectroscopy and ESR studies.     

Radical copolymerization of acrylic monomers. VIII. Copolymerization of methyl methacrylate with methyl α-p-chlorobenzylacrylate and methyl methacrylate with methyl α-p-methoxybenzylacrylate

Free-radical copolymerization of methyl methacrylate with methyl α-p-chlorobenzylacrylate and methyl methacrylate with methyl α-p-methoxybenzylacrylate have been studied in benzene solution at 40°C. Although a simple copolymerization model fits the composition data, the kinetic behavior of both copolymerization systems are analyzed from simple and reversible copolymerization models, taking into account the relatively low ceiling temperature of both methyl α-(p-substituted benzyl)acrylates and considering that the overall rate of copolymerization drastically decreases with the increase of the corresponding methyl α-(p-substituted benzyl)acrylate molar fraction in the feed.     

Determination of coisotacticities of some alternating styrene–acrylic copolymers by NMR spectra

Coisotacticities σ for some alternating copolymers were determined through the analyses of their CH₃O, CH₃ and CH₂ proton NMR spectra; styrene–methyl methacrylate (σ = 0.56), styrene-methyl acrylate (σ = 0.53), styrene–methyl α-chloroacrylate (σ = 0.69), styrene–methacrylonitrile (σ = 0.19), styrene–methacrylamide (σ = 0.16), α-methylstyrene–methyl methacrylate (σ = 0.21), and α-methylstyrene–methyl acrylate (σ = 0.53) were studied. It was found that a terminal model or Bernoullian trial prevails in these complexed copolymerizations with diethylaluminum chloride. The influence of monomer structure on σ values is discussed.     

Polymerization of coordinated monomers. XIV. Systematic deviations from alternating regulation in copolymerization of methyl methacrylate with styrene in the presence of metal halides

Methyl methacrylate (MMA) and styrene (St) copolymerize in the presence of zinc chloride at 3°C under photoirradiation. The contents of methyl methacrylate in the copolymers obtained at a [ZnCl₂]/[MMA] molar ratio of 0.4 are systematically larger than 53 mole %, which is the limiting value at a small feed ratio of methyl methacrylate. The resulting copolymers are confirmed as the sole products and not the mixtures by thin layer chromatography. The effect of dilution of the monomer feed mixture with toluene on copolymer composition suggests that it depends chiefly on the feed concentration of styrene and hardly at all on monomer feed ratios. Copolymerizations are also conducted in the presence of stannic chloride at ?17°C under photoirradiation and in the presence of ethylaluminium sesquichloride at 0°C with spontaneous initiation. The contents of methyl methacrylate in both copolymers obtained at feed ratios lower than 60 mole % almost correspond to the 1:1 alternating copolymer and increase systematically with higher feed ratios. The systematic deviations of copolymer composition obtained in the presence of metal halides are reasonably interpreted by the participation of the binary molecular complex composed of metal halide and methyl methacrylate in the polymerization of the ternary molecular complex composed of metal halide, methyl methacrylate, and styrene.     

Synthesis and characterization of well‐defined poly(2‐hydroxyethyl methacrylate‐co‐styrene)‐graft‐poly(ε‐caprolactone) by sequential controlled polymerization

A new graft copolymer, poly(2‐hydroxyethyl methacrylate‐co‐styrene) ‐graft‐poly(?‐caprolactone), was prepared by combination of reversible addition‐fragmentation chain transfer polymerization (RAFT) with coordination‐insertion ring‐opening polymerization (ROP). The copolymerization of styrene (St) and 2‐hydroxyethyl methacrylate (HEMA) was carried out at 60 °C in the presence of 2‐phenylprop‐2‐yl dithiobenzoate (PPDTB) using AIBN as initiator. The molecular weight of poly (2‐hydroxyethyl methacrylate‐co‐styrene) [poly(HEMA‐co‐St)] increased with the monomer conversion, and the molecular weight distribution was in the range of 1.09 ～ 1.39. The ring‐opening polymerization (ROP) of ?‐caprolactone was then initiated by the hydroxyl groups of the poly(HEMA‐co‐St) precursors in the presence of stannous octoate (Sn(Oct)₂). GPC and ¹H‐NMR data demonstrated the polymerization courses are under control, and nearly all hydroxyl groups took part in the initiation. The efficiency of grafting was very high. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5523–5529, 2004     

Block copolymerization. VIII. Anionic polymerization of α-pyrrolidone by polystyrene initiator

Polystyrene with N-acyl pyrrolidone groups at both ends was prepared by radical polymerization with 4,4′-azobis(pyrrolidone 4-cyanovalerate). With this polystyrene as the initiator, the anionic polymerization of α-pyrrolidone was carried out, to give the well-defined ABA-type block copolymers of α-pyrrolidone and styrene. The obtained copolymers were characterized by their composition, reduced viscosity, and initiation efficiency. Initiation efficiency was sufficiently high, and the stepwise propagation process was verified so far as the polymerization time was not so long. The results of the polymerization in a high-vacuum system were compared with those in a low-vacuum system, and some differences were observed owing to the effect of water.     

Polymerization and copolymerization of α-methacrylophenone

Under a variety of conditions it has not been possible to induce the free-radical-initiated homopolymerization of α-methacrylophenone (α-MAP). The only product isolated from such efforts was the Diels-Alder dimer of the monomer. A Mayo-Lewis plot of the free-radical copolymerization of α-MAP and styrene shows considerable scatter but the copolymer composition indicates that an α-MAP unit can add to itself. These results have been ascribed to a penultimate effect. α-MAP is homopolymerized by dimsylsodium or n-butyllithium. Attempted copolymerization of α-map and styrene with n-butyllithium produces >95% α-MAP. Unexpectedly, α-MAP does not homopolymerize with lithium dispersion, but does react in the presence of styrene to give product containing a relatively small amount of α-MAP.     

Emulsion and controlled miniemulsion polymerization of the renewable monomer γ‐methyl‐α‐methylene‐γ‐butyrolactone

The kinetics of free‐radical emulsion polymerization of γ‐methyl‐α‐methylene‐γ‐butyrolactone (MeMBL), a renewable monomer related to methyl methacrylate, are presented in detail for the first time, and stable polymer latices are prepared. The effects of different reaction parameters on free‐radical emulsion polymerization of MeMBL are presented. Homogeneous nucleation is asserted to be the dominant path for particle formation. Miniemulsion copolymerization of MeMBL and styrene is also reported. In this case, the homogeneous nucleation process appears limited when using an oil soluble initiator. Both the RAFT miniemulsion polymerizations and RAFT bulk polymerizations are well controlled and narrow polydispersity copolymers are produced. Rate retardation is observed in the RAFT miniemulsion polymerizations compared with the free‐radical polymerization and RAFT bulk polymerizations and the possible causes of the retardation are discussed. The reactivity ratios of MeMBL and styrene in RAFT bulk copolymerization are also determined. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5929–5944, 2008