A Sensitive Spectrophotometric Determination of Niobium (V) with 5, 7-Dinitro-8-Hydroxyquinoline

Niobium (V) reacts with 5,7-dinitro-8-hydroxyquinoline to form yellowish-orange coloured complex having maximum absorbance at 420 nm in citric acid medium. The reaction is slow at room temperate, it is complete in 15 minutes at temperate 40°. The colour is stable for at least 16 hours. Effects of heating temperate, time, pH, reagent concentration and other variables have been studied. The system confirms the Beer's law over the concentration range investigated. Optimum condition range for measurement in 10 mm cell is 1–12 μg of niobium. The molar absorptivity is 5.327 × 10⁸ litre moles^?1cm^?1. The interference from foreign ions has been evaluated. The metal ligand ratio of 1:2 was confirmed by Job's continous variation and mole ratio methods.     

Spectrophotometric Determination of Zirconium in Monazite Sand

A sensitive spectrophotometric method was developed for the determination of zirconium in monazite sand. The zirconium ion was previously separated from the other interfering elements by a 0.5 M thenoyltrifluoroacetone (TTA)-xylene extraction, then determined with Arsenazo III in 9 M HCl medium. Zirconium reacted with Arsenazo III to form an emeraled green coloured complex having maximum absorbance at 665 nm in 9 M HCl medium. The color was stable for at least 2 hours. Effects of time, HCl concentration, gelatine and various ions have been studied. The system confirms the Beer's law over the concentration range investigated. Optimum condition range for measurement in 1.0 cm quartz cell is 0.1–0.5 μg/ml of zirconium. The molar absorptivity is 1.51×10⁵ liter mole^?1 cm^?1. The metal-ligand ratio of 1:4 was confirmed by Job's Continuous Variation method and the conditional stability constant of Zirconium-Arsenazo III Complex in 4 M HCl and 9 M HCl were also determined by this method.     

Spectrophotometric Determination of Iron (III) Using 3-Hydroxy-2-Methyl-1,4-Naphthoquinone Monoxime (HMNQM)

Iron (III) forms brown coloured complex with 3-hydroxy-2-methyl-1,4-naphthoquinone monoxime. The iron (III)-HMNQM complex is found to be soluble in DMF and exhibits maximum absorption at 470 nm in the pH range 4.5–5.5. Beer's law is obeyed upto 5.58 ppm of iron (III) and sensitivity of the reaction is 0.0046 μg/cm², with molar absorptivity of 1.21×10⁴ ? mole^?1 cm^?1. The method has been used for the determination of iron (III) in alloys.     

Spectrophotometric method for determination of atrazine and its application to commercial formulations and real samples

A simple sensitive spectrophotometric method has been developed for the determination of atrazine in herbicide formulations and real samples. The method was based on the reaction of atrazine with pyridine to form a quaternary halide which in the presence of alkali forms a carbinol base. The heterocyclic ring of the carbinol base breaks and forms the glutaconic dialdehyde. The glutaconic dialdehyde group was coupled with sulfanilic acid to form a yellow coloured product having λ _max 450 nm or coupled with aniline to form a orange red coloured product having λ _max 480 nm. The Beer's law was obeyed over the range from 0.1 to 25 µg mL^?1 and molar absorptivity 1.5 × 10⁴ L mol^?1 cm^?1 for sulfanilic acid, and from 0.08 to 12 µg mL^?1 and molar absorptivity 1.3 × 10⁴ L mol^?1 cm^?1 for aniline were observed. The reaction conditions and other analytical parameters were optimised. The proposed method has been successfully applied for the analysis of commercial formulations and real samples.     

Spectrometric Determination of Nitrite in Aqueous Solution by the Diazotization-Coupling Method with p-Aminobenzophenone-N-(1-Naphthyl)-Ethylenediamine

Abstract

Nitrite ion at low concentration is determined spectrometrically by diazotization of p-aminobenzo-phenone and coupling of the resulting diazonium cation with N-(1-naphthy1)-ethylene-diamine to form a reddish-violet coloured water-soluble azo dye with maximum absorption at 555 nm. The method is suitable for the determination of nitrite over the range of 0.04–1.00 ppm. Beer's law is obeyed over this range of concentrations. The observed molar absorptivity and Sandell's sensitivity of the azo dye are 7.0 × 10⁴ mol^?1 cm^?1 and 6.5 × 10^?4 μg cm^?2, respectively. Interferences due to other ions were studied to test the selectivity.     

N-p-tolyl-2-furohydroxamic Acid as the Extracting and Spectrophotometric Reagent for Vanadium(V)

Abstract

A simple and rapid spectrophotometric determination of vanadium(V) is described. The vanadium-N-p-tolyl-2-furohydroxamic acid complex is extracted into chloroform form 6–8 molar hydrochloric acid solution. Maximum absorbance occurs at 540 nm and Beer's Law is obeyed over the range of 0–15 μg of vanadium in the organic phase. The molar absorptivity is 3.0 × 10³ mole^?1 cm^?1 at 540 nm.

Vanadium could be determined in high purity niobium and tantalum metals, cast iron, steel, non ferrous alloys and silicates. Vanadium could be determined in the presence of several commonly occurring cations.     

Field determination of fluoride in drinking water using a polymeric aluminium complex of 5-(2-carboxyphenylazo)-8-hydroxyquinoline impregnated paper

A simple field method which allows the determination of fluoride in drinking water with a small handheld instrument called Arsenator was developed. Arsenator is a commercially available instrument which was used successfully for reliable determination of arsenic. In the proposed method the functionality of the Arsenator which is based on a photometric measurement of a spot on the reagent paper is expanded to analyse fluoride. A polymeric aluminium complex of 5-(2-carboxyphenylazo)-8-hydroxyquinoline (LH₂) has been prepared as a new specific reagent for fluoride. Job's method of continuous variation was adopted for the determination of the composition of the coloured complex, which was further characterized by UV-VIS spectroscopic studies. The molar absorptivity of the complex formation is 8.48?×?10³?L?mol^?1?cm^?1 at 410?nm. The coloured complex reacts with fluoride on an impregnated paper where its colour changes are dependent on the concentration of fluoride in water samples. The change in the colour was measured using the Arsenator. The method allows a reliable determination of fluoride in the range 0.3 to 2.0?mg?L^?1. Further spectophotometric determinations of fluoride in drinking water were also studied. The determination is based on the reaction of aluminium complex with fluoride in the examined samples. Beer's law is obeyed in the range 0.3 to 2.0?mg?L^?1 of fluoride at 495?nm. Sensitivity, detection limit and quantitation limit of the method were found to be 0.251?±?0.007?µg^?1?mL, 0.1?mg?L^?1 and 0.3?mg?L^?1, respectively. The optimum reaction conditions and other analytical conditions were evaluated. The effect of interfering ions on the determination is described. There is no interference by nitrate or chloride. Sulphate interfered only at high concentrations which are not expected in drinking water.     

Extraction-Spectrophotometric or -Atomic Absorption Spectrophotometric Determination of Titanium Using Caffeic Acid and a Liquid Ion Exchanger

Abstract

A selective and sensitive method for the extraction followed by a spectrophotometric or atomic absorption spectrophotometric determination of titanium(IV) in trace amounts is described. The molar absorptivity of the caffeic acid-Aliquat 336 complex is 5.7 × 10⁴ l mol^?1 cm^?1 at 380 nm; the yellow coloured complex obeys Beer's law in the range 0.05–1.2 mg/l of titanium in the final extract. The method is applied to the preconcentration, separation and determination of titanium(IV) in steel, industrial effluents and environmental samples.     

Determination of the Natural Dissolved Concentration of Zirconium in Seawater by Adsorptive Stripping Voltammetry

A voltammetric method was developed for zirconium determination as Zr(IV)‐cupferron‐oxalate‐diphenylguanidine complex based on adsorptive accumulation at the HMDE (E_peak=?0.95 V). The supporting electrolyte was a mixture of acetate/acetic acid (pH 4.6) and ammonium acetate (pH 5.7) solutions. E_ads=?0.6 V (vs. Ag/AgCl), t_ads=400 s, 10 mV s^?1 scan rate, and DP mode were the main parameters. The linear range was 0.033 to 3.3×10^?9 mol L^?1, and the LOD and LOQ (t_ads=400 s) were 0.77 and 1.6×10^?11 mol L^?1, respectively. The method was adequate for seawater samples, although not sufficiently sensitive for surface waters.     

Chemical Speciation of Antimony(III and V) in Water by Adsorptive Cathodic Stripping Voltammetry Using the 4‐(2‐Thiazolylazo) – Resorcinol

A simple adsorptive cathodic stripping voltammetry method has been developed for antimony (III and V) speciation using 4‐(2‐thiazolylazo) – resorcinol (TAR). The methodology involves controlled preconcentration at pH 5, during which antimony(III) – TAR complex is adsorbed onto a hanging mercury drop electrode followed by measuring the cathodic peak current (I_p,c) at ?0.39 V versus Ag/AgCl electrode. The plot of I_p,c versus antimony(III) concentration was linear in the range 1.35×10^?9–9.53×10^?8 mol L^?1.The LOD and LOQ for Sb(III) were found 4.06×10^?10 and 1.35×10^?9 mol L^?1, respectively. Antimony(V) species after reduction to antimony(III) with Na₂SO₃ were also determined. Analysis of antimony in environment water samples was applied satisfactorily.     

Development and Validation of Selective Spectrophotometric Methods for the Determination of Pregabalin in Pharmaceutical Preparation

Three simple, quick and sensitive methods are described for the spectrophotometric determination of pregabalin (Pgb) in pharmaceutical preparations. Among them, the first two methods are based on the reaction of Pgb as n-electron donors with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) and 7,7,8,8-tetracyanoquinodimethane (TCNQ) as π-acceptors to give highly colored complex species. The colored products were quantitated spectrophotometrically at 494 and 841 nm for DDQ and TCNQ, respectively. Optimization of the different experimental conditions was conducted. Beer’s law was obeyed in the concentration ranges 2.0—30.0 and 1.5—10 µg•mL－1 for DDQ and TCNQ methods, respectively. The third method is based on the interaction of ninhydrin (NN) with primary amine present in the pregabaline. This reaction produces a blue coloured product in N,N-dimethylformamide (DMF) medium, which absorbs maximally at 573 nm. Beer’s law was found in the concentration range 40.0—180.0 μg•mL－1. The methods were applied successfully to the determination of this drug in pharmaceutical dosage forms.     

Extractive spectrophotometric determination of rhenium with α-benzildioxime and thiocyanate

ReO ₄ ^? ions form in HCl a coloured complex with α-benzildioxime and thiocyanate in presence of SnCl₂ as reductant, which is quantitatively extractable into isoamyl acetate with λ_max at 430 nm. The method is highly sensitive. Beer's law is obeyed in the range of 0.2–8.8 μg Re/mL.     

Rapid spectrophotometric determination of ruthenium(III) with prochlorperazine maleate

A rapid, simple spectrophotometric method for the determination of μg amounts of ruthenium, based on the formation of a pink complex between the metal and prochlorperazine maleate (PCPM) in sulphuric or hydrochloric acid solution, is described. The complex has an absorption maximum at 530 nm and its molar absorptivity is 6.733·10³ l mol^?1 cm^?1. The sensitivity is 0.0151 μg Ru cm^?2 for log I_o/I = 0.001. Beer's law is valid over the range 0.2–10 μg Ru ml^?1 ; the optimal range for spectrophotometric determination is 0.8–8.0 μg Ru ml^?1. Job's method of continuous variation, the mole ratio method and the slope ratio method indicate a 1:1 composition for the complex. The effects of acidity, time, temperature, order of addition of reagents, reagent concentration, and the interferences from various ions are reported.     

Square‐Wave Voltammetric Determination of Paraquat at Carbon Paste Electrode Modified with Hydroxyapatite

The voltammetric behavior of paraquat was investigated at hydroxyapatite‐modified carbon paste electrode HAP‐CPE in K₂SO₄. A method was developed for the detection of the trace of this herbicide, based on their redox reaction. The reduction peaks of paraquat were observed around ?0.70 V and ?1.00 V (vs. SCE) in square‐wave voltammetry. Experimental conditions were optimized by varying the accumulation time, apatite loading and measuring solution pH. Calibration plots were linear under the optimized parameters over the herbicide's concentration range 8–200×10^?7 mol L^?1, with a detection and quantification limits about 1.5×10^?8 mol L^?1 and 6.4 10^?8 mol L^?1, respectively.     

Selective determination of selenium(IV) from environmental samples by UV-visible spectrophotometry using O-methoxyphenyl thiourea as a chelating ligand

A selective extraction–spectrophotometric method has been developed for determination of selenium(IV) using O-methoxyphenyl thiourea (OMePT) as a chelating agent. The basis of the proposed method is the spectrophotometric determination of selenium(IV)–OMePT complex obtained after extraction of selenium(IV) from 3.5 M hydrochloric acid media using OMePT in chloroform solvent. The complex shows maximum absorbance at 350 nm against the reagent blank. The Beer’s law was obeyed over the concentration range 5–60 µg mL^?1 of selenium(IV). The optimum concentration range was 20–50 µg mL^?1 as evaluated from Ringbom’s plot. The molar absorptivity and Sandell’s sensitivity of the selenium(IV)–OMePT complex in chloroform were 3.312 × 10² L mol^?1cm^?1 and 0.2384 µg cm^?2, respectively. The composition of selenium(IV)–OMePT complex was 1:2 established from slope ratio method, mole ratio method and Job’s continuous variation method. The complex was stable for more than 72 h. The interfering effect of various foreign ions was studied and suitable masking agents were used wherever necessary to enhance the selectivity of the developed method. The proposed method was successfully applied for the determination of selenium(IV) from real samples, viz. pharmaceutical formulations, shampoo, vegetable sample, synthetic mixtures and environmental samples. Repetition of the method was checked by finding the relative standard deviation (RSD) for 10 determinations which was 0.35%.     

Determination of Trace Amount of Lead(II) in Sweet Fruit‐Flavored Powder Drinks by Differential Pulse Adsorptive Stripping Voltammetry at Carbon Paste Electrode

A new method is described for the determination of lead based on the cathodic adsorptive stripping of the lead–nuclear fast red (NFR) at a carbon paste electrode (CPE). The differential pulse voltammograms of the adsorbed complex of lead–NFR are recorded from ?0.10 to ?0.60 V (versus Ag/AgCl electrode). Optimal conditions were found to be an electrode containing 25% paraffin oil and 75% high purity graphite powder, 4.0×10^?5 mol L^?1 NFR; buffer solution (pH of 3.0), accumulation potential and time, ?0.20 V, 60 and 120 s (for high and low concentration of lead), respectively. The results show that the complex can be adsorbed on the surface of the CPE, yielding one peak at ?0.34 V, corresponding to reduction of NFR in the complex at the electrode. The detection limit was found to be 0.2 ng mL^?1 with a 120s accumulation time. The linear ranges are from 0.5 to 50 (t_acc=120 s) and 50 to 200 ng mL^?1 (t_acc=60 s). Application of the procedure to the determination of lead in lake water, bottled mineral water, synthetic samples and sweet fruit‐flavored powder drinks samples gave good results.     

Extraction of gold(III) from low-grade ores with amidines followed by its spectrophotometric determination with methylene blue

A procedure is described in which gold(III) is quantitatively extracted with an amidine into chloroform over the acidity range pH 3.0–11.0 M HCl, followed by its selective spectrophotometric determination by interaction of the extract with methylene blue in the pH range 3.0–9.0. The molar absorptivity of the coloured complex formed by extraction with ten different amidines and methylene blue reaction lie in the range 1.1 × 10⁴?6.5 × 10⁴ 1 mol^?1 cm^?1 at λ_max (650 nm) in chloroform. The simplest compound, N, N′-diphenylbenzamidine, was chosen for detailed study. The limit of detection is 5 μg Au l^?1. The method is free from interferences from the metals that are generally associated with gold. The method is simple, reproducible and applicable to the accurate recovery of gold from low-grade ores containing the metal at levels of > 1.5 μg g^?1.     

Chemical equilibria and sequential extractive spectrophotometric determination of selenium(IV) and (VI) using the chromogenic reagent 4,4′-dichlorodithizone

The chromogenic reagent 4,4′-dichloro(3-mercapto-1,5-diphenylformazan), Cl₂H₂D _Z , forms a yellow–red-coloured complex with selenium(IV). The produced complex species was extracted quantitatively into n-hexane, and its absorbance was measured at 416?nm. The chemical composition of the extracted selenium(IV)-Cl₂H₂D _Z chelate and the molar absorptivity at 416?nm were found to be [SeO (Cl₂HD _Z )₂] and 9?×?10⁴?L?mol^?1?cm^?1, respectively. The values of the extraction constants (K _D, K _ex, β) enable a convenient application of the proposed system for the liquid–liquid extraction procedure and sequential spectrophotometric determination of traces of inorganic selenium(IV) and/or selenium(VI) after reduction of the later to selenium(IV) with HCl (6?M). Beer's law and Ringbom's plots were obeyed in the concentration range 0.01–20 and 0.5–19?µg?mL^?1 of selenium(IV), respectively, with a relative standard deviation of 2.2%. The proposed method has been successfully applied to the determination of selenium(IV) or (VI) and total inorganic selenium(IV) and (VI) in tap and freshwater samples.     

A Rapid,Simple, and Sensitive Spectrophotometric Determination of Traces of Vanadium (V) in Foodstuffs,Alloy Steels,and Pharmaceutical,Water, Soil,and Urine Samples

Abstract

A rapid, simple, sensitive, and selective spectrophotometric method is investigated for the determination of traces of vanadium (V) in foodstuffs, alloy steels, and pharmaceutical, water, soil, and urine samples in aqueous DMF medium. The metal ion forms a green colored complex with 2-hydroxy-3-methoxy benzaldehyde thiosemicarbazone (HMBATSC) in an acidic buffer of pH 6.0. The green colored solution, having an absorbance maximum at 380 nm, is stable for more than 72 hours. Beer's law is obeyed in the range of 0.051–2.037 µg ml^?1. The molar absorptivity and Sandell's sensitivity of the method are found as 2.75 × 10⁴ l mol^?1 cm^?1 and 0.0018 µg cm^?2, respectively. The green colored complex has 1:2 [V(V)-HMBATSC] stoichiometry. The stability constant of the complex is determined as 3.267 × 10¹¹ by Job's method. The optimum reaction conditions and other analytical parameters are studied. A sensitive and selective second-order derivative spectrophotometry has also been proposed for the determination of V(V). The interference of various cations and anions are studied. The present method is successfully applied to the determination of vanadium (V) in foodstuffs, alloy steels, and pharmaceutical, water, soil, and urine samples.     

Spectrophotometric Determination of Sulphathiazole

Abstract

A new, rapid, simple, selective and sensitive method for the spectrophotometric determination of sulphathiazole is described. The drug forms a yellow coloured complex with Pd(II) in alkaline medium (1 M NaOH). The drug complex exhibits maximum absorbance at 410 nm, with a molar absorptivity of 1.9 × 10³ 1 mol^?1 cm^?1. Effects of molarity of NaOH, reagent concentration on the proper complex formation are discussed. The system obeys Beer's law in the concentration range of 10-160 ppm of sulphathiazole.