Electrospray-Ionization Mass Spectrometry. Part III. Acid-Catalyzed Isomerization of N,N′-Bis[(E)-3-(4-hydroxyphenyl)prop-2-enoyl]spermidines by the Zip Reaction

The electrospray tandem mass spectra (ESI-MS/MS) of the three N,N′-bis[(E)-3-(4-hydroxyphenyl)prop-2-enoyl]spermidines 1–3 displayed the same fragment-ion signals. These isomers could not be differentiated by ESI-MS/MS, since their fragmentation patterns are similar. (E,E)-N-(3-[¹⁵N]Aminopropyl)-3,3′-bis(4- hydroxyphenyl)-N,N′-(butane-1,4-diyl)bis[prop-2-enamide] ([¹⁵N(1)])-( 1 ) was synthesized in order to get further information about the fragmentation mechanisms. The comparison of the ESI-MS/MS of 1 and [¹⁵N(1)]- 1 revealed a transamidation, the Zip reaction, under mass-spectral conditions of the [ 1 + H]⁺ ions. Because of this reaction, the three isomers 1–3 could not be distinguished.     

Synthese der p-Cumaroylspermidine

The Synthesis of p-Cumaroylspermidines The synthesis of three mono[(E)-3-(4-hydroxyphenyl)prop-2-enoyl]spermidines, 10, 20 , and 28 , three bis[(E)-3-(4-hydroxyphenyl)prop-2-enoyl]spermidines, 6, 16 , and 25 , and one tris[(E)-3-(4-hydroxyphenyl)prop-2-enoyl]-spermidine is described.     

The Photoisomerization Behavior of the (4-Hydroxycinnamoyl)-spermidines

The photoisomerization behavior of three mono[(E)-3-(4-hydroxyphenyl)prop-2-enoyl]spermidines, 1, 2 , and 3 , and three bis[(E)-3-(4-hydroxyphenyl)prop-2-enoyl]spermidines, 4, 5 , and 6 , are investigated. The synthetic product (E)- 1 could be almost quantitatively (> 96%) converted into its isomer (Z)- 1 under UV light irradiation. In the cases of (E)- 2 and (E)- 3 , a mixture of (E)/(Z) ca. 1:2 was obtained, when the same conditions were applied. The comparison of their UV spectra provides the possible explanation for these different behaviors. Furthermore, it was noticed that the (Z) → (E) isomerization of the C?C bond took place during the purification by reverse-phase high-performance liquid chromatography (RP-HPLC), and the (E)/(Z)-mixture is thus inseparable. The same feature could be observed during the isolation of the (Z,Z)-N,N′-bis[3-(4-hydroxyphenyl)prop-2-enoyl]-spermidines, (Z,Z)- 4 , (Z,Z)- 5 , and (Z,Z)- 6 . Nevertheless, the fractions of (Z,Z)- 5 and (Z,Z)- 6 were in almost pure state collected, and their ¹-NMR spectra are presented.     

Cyclothiomethylation of aliphatic polyamines with formaldehyde and hydrogen sulfide

Cyclothiomethylation of the terminal amino groups in N-(2-aminoethyl)ethane-1,2-diamine, N,N′-bis(2-aminoethyl)ethane-1,2-diamine, and N,N′-bis(2-aminoethyl)ethane-1,1-diamine with formaldehyde and hydrogen sulfide gave the corresponding bis-1,3,5-dithiazinane derivatives. The reaction in aqueous butanol at 0°C was accompanied by intermolecular thiomethylation at the secondary amino groups with formation of previously unknown polyheterocyclic compounds containing nitrogen and sulfur atoms.     

On-Line Coupling of High-Performance Liquid Chromatography to Atmospheric Pressure Chemical Ionization Mass Spectrometry (HPLC/APCI-MS and MS/MS). The Pollen Analysis of Hippeastrum x hortorum (Amaryllidaceae)

A H₂O/MeOH extract of the pollen of Hippeastrum x hortorum (Amaryllidaceae) was analyzed. A mixture of different compounds (at the most 84) was found, namely the geometrically ((E,E), (E,Z), (Z,E), and (Z,Z) and structurally isomeric N,N′-dicoumaroyl (=N,N′-bis[3-(4-hydroxyphenyl)prop-2-enoyl]), N,N′-diferuloyl (=N,N′-bis[3-(4-hydroxy-3-methoxyphenyl)prop-2-enoyl]), N,N′-disinapoyl (=N,N′-bis[3-(4-hydroxy-3,5-dimethoxyphenyl)prop-2-enoyl]), N-coumaroyl-N′-feruloyl, and N-feruloyl-N′-sinapoyl derivatives of spermidine (=4-azaoctane-1,8-diamine=N-(3-aminopropyl)butane-1,4-diamine). Their structures were proven by using on-line-coupled high-performance liquid chromatography and atmospheric-pressure chemical-ionization mass spectrometry (HPLC-UV(DAD)/APCI-MS and MS/MS), UV-induced (E)⇌(Z) photoisomerization, and catalytic hydrogenation, as well by comparing their spectra and chromatographic behavior with those of synthetic standards. According to the physicochemical properties of these natural compounds, a proposed biological function is discussed.     

Reaction of thiourea with formaldehyde and simplest aliphatic diamines

N,N′-Bis(hydroxymethyl)thiourea reacted with propane-1,3-diamine at a molar ratio of 2 : 1 to give 5,5′-propane-1,3-diylbis(1,3,5-triazinane-2-thione), whereas 1,3,5,7,11,13,15,17-octaazatricyclo[15.3.1.1^7,11]-docosane-4,14-dithione was obtained in the reaction with equimolar amounts of the reactants. Tricyclic product was also formed in the three-component condensation of thiourea with formaldehyde and propane-1,3-diamine at a ratio of 1 : 3 : 1. The reactions of N,N′-bis(hydroxymethyl)thiourea with ethane-1,2-diamine (2 : 1) and of thiourea with formaldehyde and butane-1,4-diamine (1 : 2 : 1) afforded 5,5′-(ethane-1,2-diyl)bis(1,3,5-triazinane-2-thione) and 5,5′-(butane-1,4-diyl)bis(1,3,5-triazinane-2-thione), respectively.     

Reactions of Elemental Phosphorus and Phosphine with Electrophiles in Superbasic Systems: XV. Phosphorylation of Allyl Halides with Elemental Phosphorus

Elemental phosphorus (red or white) reacts with allyl chloride and allyl bromide in a two-phase system aqueous KOH-organic solvent to form tertiary symmetrical and mixed phosphine oxides among which tris(prop-2-enyl)-, bis(prop-2-enyl)[(E)-prop-1-enyl]-, bis(prop-2-enyl)[(Z)-prop-1-enyl]-, (prop-2-enyl)[(E)-prop-1-enyl][(Z)-prop-1-enyl]-, bis[(E)-prop-1-enyl](prop-2-enyl)-, bis[(Z)-prop-1-enyl](prop-2-enyl)-, tris-[(E)-prop-1-enyl]-, and bis[(E)-prop-1-enyl][(Z)-prop-1-enyl]phosphine oxides were identified. The conditions (room temperature, 60% aqueous KOH-dioxane) allowing preparation from white phosphorus and allyl bromide of tris(prop-2-enyl)- and bis(prop-2-enyl)[(E)-prop-1-enyl]phosphine oxides as major products in the total yield of up to 96% were found.     

Synthesis of azoles from 3,3′-[(4-alkoxyphenyl)imino]bis(propanoic acid hydrazides)

Abstract  

Reaction of 3,3′-[(4-alkoxyphenyl)imino]bis(propanoic acid hydrazides) with CS₂ in alkaline solution and subsequent acidification gave 5,5′-[[(4-alkoxyphenyl)imino]diethane-2,1-diyl]bis(1,3,4-oxadiazole-2(3H)-thiones). The same dihydrazides on reaction with phenyl isocyanates or phenyl isothiocyanates were converted to bis[N′-(phenylaminocarbonyl)propanoic acid hydrazides] and bis[N′-(phenylaminocarbonothioyl)propanoic acid hydrazides], which underwent cyclization in alkaline medium to produce 5,5′-[[(4-alkoxyphenyl)imino]diethane-2,1-diyl]bis(4-phenyl-2,4-dihydro-3H-1,2,4-triazol-3-ones) and their 3-thio analogues, whereas in sulfuric acid or POCl₃ 5,5′-[[(4-alkoxyphenyl)imino]diethane-2,1-diyl]bis(N-phenyl-1,3,4-oxadiazol-2-amines) and 5,5′-[[(4-alkoxyphenyl)imino]diethane-2,1-diyl]bis(N-phenyl-1,3,4-thiadiazol-2-amines) were obtained.     

Stereoselectivity in Reactions of Metal Complexes. Part XV. Structure and stability of chiral cobalt(III) complexes with pentadentate ligands

The syntheses and characterization of four new linear pentadentate ligands and their Co^III complexes are described: N,N′-[(pyridine-2,6-diy)bis(methylene)]bis[sarcosine] (sarmp), N,N′-[(pyridine-2,6-diyl)bis(methylene)]bis[(R)- or (S)-proline] ((R,R)- or (S,S)-promp), N,N′-[(pyridine-2,6-diyl)bis(methylene)]bis[N-(methyl)-(R)- or (S)-alanine] ((R,R)- or (S,S)-malmp); 2,2′-[pyridine-2,6-diyl]bis[(S)- or rac-N-(acetic acid)pyrrolidine] ((S,S)- or rac-bapap). The complexes were characterized and, with but one exception, complex formation is stereospecific: Δ-exo-(R,R) (or Λ-exo-(S,S)) for promp and Λ-(R,R) (or Δ-(S,S)) for bapap. The exception is [Co((R,R)- or (S,S)-malmp)H₂O]ClO₄ for which two forms are obtained, to which Λ-endo-(R,R) (or Δ-endo-(S,S)) and, tentatively, Δ-unsymmetric-(R,R)- (or Λ-unsymmetric-(S,S)-) configurations are assigned. X-Ray crystal structures are presented for the complexes [Co(sarmp)H₂O]ClO₄, [Co((S,S)-promp)H₂O]ClO₄, [Co(rac-bapap)H₂O]ClO₄ and endo-[Co(rac-malmp)H₂O]ClO₄. Ligand acid dissociation and Co^II and Fe^II complex-formation constants are reported.     

Three gemini cationic surfactants as biodegradable corrosion inhibitors for carbon steel in HCl solution

Three gemini cationic surfactants with different hydrophobic spacer chain lengths were synthesized and characterized. The inhibition effect of N,N′-bis(2-hydroxyethyl)-N,N′-dimethyl-N,N′-bis(2-(tetradecanoyloxy)ethyl)ethane-1,2-diaminium bromide (G-2); N,N′-bis(2-hydroxyethyl)-N,N′-dimethyl-N,N′-bis(2-(tetradecanoyloxy)ethyl) hexane-1,6-diaminium bromide (G-6); and N,N′-bis(2-hydroxyethyl)-N,N′-dimethyl-N,N′-bis (2-(tetradecanoyloxy) ethyl) dodecane-1,12-diaminium bromide (G-12) on the corrosion of carbon steel in 1.0 M HCl solution at 25–60 °C was studied by weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy. The results show that the synthesized inhibitors are effective inhibitors even at very low concentration, and the adsorption on the carbon steel surface obeys the Langmuir adsorption isotherm. Potentiodynamic polarization curves reveal that the synthesized inhibitors behave as a mixed-type inhibitor. Adsorption of used inhibitors led to a reduction in the double layer capacitance and an increase in the charge transfer resistance. Thermodynamic parameters have been obtained by adsorption theory. Surface activity and corrosion inhibition relationship were discussed. The biodegradability of the synthesized surfactants showed their readily biodegradation in the open environment and were considered as environmentally friendly corrosion inhibitors.

     

Unsymmetrical N and/or O-bridged calixarene derivatives: synthesis,structure and encapsulation of solvent molecules in the solid state

Eight unsymmetrical N and/or O-bridged calixarene derivatives were obtained by 1 (naphthalene-2,7-diol), 2 (bis(4-hydroxyphenyl)methanone), 3 (4,4′-methylenedianiline), 4 (3,3′-methylenedianiline), 5 (4,4′-oxydianiline) and 6 (4,4′-(perfluoropropane-2,2-diyl)dianiline) reacting with fragment a (4,4′-bis(dichloro-s-triazinyloxy)propane-2,2-diyldibenzene) and b (N,N′-bis(dichloro-s-triazinyl)-4,4′-methylenedianiline) under very mild reaction conditions via efficient fragment coupling strategy. We also obtained the crystal structure of 1a (tetraoxocalix[2](propane-2,2-diyldibenzene,naphthalene)[2]triazine) which can form a molecular capsule by two dimers with C–H?N and C–H?O quadruple hydrogen bonds, and it has the encapsulation ability toward solvent molecules.     

All-polymer solar cells with perylenediimide polymer acceptors

Four polymers based on perylenediimide co-polymerized with thiophene, bithiophene, selenophone and thieno[3,2-b]thiophene were investigated as the acceptor materials in all-polymer solar cells. Two different donor polymers, poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b;4,5-b′]dithiophene-2,6-diyl-alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4-b]thiophene)-2-carboxylate-2,6-diyl](PTB7-Th) and poly[(5,6-difluoro-2,1,3-benzothiadiazol-4,7-diyl)-alt-(3,3′′′-di(2-dodecyltetradecyl)-2,2′;5′,2″;5″,2′′′-quaterthiophen-5,5′′′-diyl)](Pff BT4T-2DT), with suitably complementary absorption spectra and energy levels were applied and examined. Among all different donor-acceptor pairs studied here, the combination of PTB7-Th:poly[N,N′-bis(1-hexylheptyl)-3,4,9,10-perylenediimide-1,6/1,7-diyl-alt-2,5-thiophene](PDI-Th) exhibited the best power conversion efficiency(PCE) of 5.13%, with open-circuit voltage(V_(oc)) = 0.79 V, short-circuit current density(J_(sc)) = 12.35 mA·cm~(-2) and fill-factor(FF) = 0.52. The polymer of PDI-Th acceptor used here had a regio-irregular backbone, conveniently prepared from a mixture of 1,6- and 1,7-dibromo-PDI. It is also noteworthy that neither additive nor posttreatment is required for obtaining such a cell performance.     

Electrospray-Ionization Mass Spectrometry. Part 2. Neighboring-Group Participation in the Mass-Spectral Decomposition of 4-Hydroxycinnamoyl-spermidines

The three mono substituted N-[(E)-3-(4-hydroxyphenyl)prop-2-enoyl]spermidines 1–3 have been studied by positive-ion electrospray-ionization tandem mass spectrometry (ESI-MS/MS). Because of the neighboring-group participation, the MS/MS of [ 1 + H]⁺ and [ 2 + H]⁺ are essentially similar, while compound 3 can be easily distinguished from 1 and 2 because of the characteristic ions at m/z 218. However, with the source collision-induced dissociation (source-CID) MS/MS technique, the compounds 1 and 2 can be unambiguously distinguished by the signal of the pyrrolidinium ion (m/z 72) from their daughter ion (m/z 275). The source-CID MS/MS of the labeled compound N-(4-aminobutyl)-N-(3-aminopropyl)-N-[3-(4- hydroxyphenyl)prop-2-en[¹⁵N]amide] ([¹⁵N(4)]- 2 ) provide more information on the decomposition mechanisms and proved the occurrence of a partial transamidation reaction 2→1 during the measurement.     

The Synthesis of Novel Iodinated Iminodiacetic Acid Analogues as Hepatobiliary Imaging Agents

The synthesis and characterization of N-[2-[[4-iodo-2,6-bis(1-methylethyl)phenyl]amino]-2-oxoethyl]-N-(carboxymethyl)glycine and N-[2-[(4-iodo-2,6-diethylphenyl)amino]-2-oxoethyl]-N-(carboxymethyl)glycine is presented, as well as a modified and improved synthesis of N-[2-[(2,4-diiodo-6-methylphenyl)amino]-2-oxoethyl]-N-(carboxymethyl)glycine. These compounds are new agents for hepatobiliary imaging.     

Tricarbonylrhenium(I) bromide complexes with N,N′-bis[1-(4-chlorophenyl)ethylidene]ethane-1,2-diamine and N,N′-bis[1-(4-nitrophenyl)ethylidene]ethane-1,2-diamine–syntheses,structures, electrochemical and spectroscopic studies

Two rhenium(I) complexes, [Re(CO)₃Br(L ⁿ )] (n = 1, 2), (L¹= N,N′-bis[1-(4-chlorophenyl)ethylidene]ethane-1,2-diamine and L² = N,N′-bis[1-(4-nitrophenyl)ethylidene]ethane-1,2-diamine) have been synthesized and characterized by CHN analyses, ¹H NMR, IR, and UV-Vis spectroscopy. The molecular structure of [Re(CO)₃Br(L¹)] is a distorted octahedron around rhenium with one Br, facial arrangement of three CO's, and one diimine. The UV-Vis spectra of the complexes have metal-to-ligand charge transfer bands increasing in wavelength when the L² ligand is replaced by L¹, in agreement with the oxidation potential of the complexes.     

Syntheses and X-Ray Structures for Model Compounds of a Pyrimidinediyl-Based Rigid-Rod Aromatic Polyamide

A variety of model compounds for the pyrimidinediyl-based rigid-rod polyamide poly[imino-(pyrimidine-2,5-diyl)-imino-tetraphthaloyl] (PPYMT) was prepared, in order to compare their conformations to several model compounds of the related, fully aromatic polymer poly(p-phenyleneterephthalamide) (PPTA). In particular, the structures of N-(2-pyrimidyl)benzamide (PYMB) and its complexed form bis[(N-pyrimidin-2-yl)benzamide]nickel(II) dichloride (NiPYMB) were determined by X-ray diffraction. The molecular packing in these crystals provides us with a model for the possible ‘cross-linking’ of PPYMT fibers. The structures of the trimer model compounds N,N′ -bis(2-pyrimidyl)terephthalamide (PYTA) and N,N′ -bis(benzoyl)-2,5-diaminopyrimidine (BDAP) yield information about the conformation of PPYMT chains and are compared to analogous model compounds of PPTA.     

Neighboring group participation in the electrospray ionization tandem mass spectra of polyamine toxins of spiders. Part 1: α, ω-diaminoalkane compounds

The fragmentation pattern of N-(4-aminobutyl)-3-(4-hydroxyphenyl)prop-2-enamide (1) is characterized by an ion formed by neighboring group participation. The phenolic hydrogen is transferred to the primary amino group via a 15-membered ring. This has been proven by H/D exchange reactions and by analyzing homologues and derivatives.     

Hetero-diels–alder reaction of 5-ylidene-4-sulfanylidene-1,3-thiazolidin-2-ones with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′-bis(methoxycarbonyl)-1,4-benzoquinone diimine

Hetero-Diels–Alder reaction of 5-(propan-2-ylidene)-4-sulfanylidene-1,3-thiazolidin-2-one with N,N′-bis(methoxycarbonyl)-1,4-benzoquinone diimine in boiling toluene afforded 87% of dimethyl 9,9-dimethyl-2-oxo-8a,9-dihydro-2H-thiochromeno[2,3-d][1,3]thiazole-5,8(3H,4aH)-diylidenedicarbamate. Analogous reactions of 5-benzylidene-, 5-{[4-(dimethylamino)phenyl]methylidene}-, and 5-[(2-hydroxyphenyl)-methylidene]-4-sulfanylidene-1,3-thiazolidin-2-ones led to the formation of the corresponding dimethyl 9-aryl-2-oxo-3,9-dihydro-2H-thiochromeno[2,3-d][1,3]thiazole-5,8-diyldicarbamates in 64–82% yield.     

1,4-Cycloaddition reactions. III. Synthesis of furo[3,2-c]pyrido[2,3-g]quinolines,Furo[2,3-a] [4,7]phenanthrolines,Furo[3,2-c]pyrrolo[2,3-g]quinolines,Furo[3,2-c]pyrrolo[3,2-g]quinolines,and Furo[3,2-c]furo[2′,3′:4,5]pyrido[2,3-g]quinolines from 2,3-dihydro-5-methylfuran and schiff bases

The 1,4-cycloaddition of 2,3-dihydro-5-methylfuran (II) to 1-acetyl-1,2,3,4-te trahydro-6-[(p-hydroxybenzylidene)amino]quinoline (VIII) in the presence of boron trifluoride gave two pairs of epimers, namely dl-10-acetyl-2,3,3a,4,5,7,8,9,10,11b-decahydro-4-(p-hydroxyphenyl)-11b-methylfuro[3,2-c]pyrido[2,3-g]quinoline (IXa and b) and dl-8-acetyl-2,3,3a,4,5,8,9,10,11,-11c-decahydro-4-(p-hydroxyphenyl)-11c-methylfuro[2,3-a][4,7]phenanthroline (Xa and b). dl-9-Acetyl-3,3a,4,5,7,8,9,10b-octahydro-4-(p-hydroxyphenyl)-10b-methyl-2H-furo[3,2-c] pyrrolo-[2,3-g]quinoline (XIIIa) was the predominant product isolated from the reaction of II with 1-acetyl-5-[p-(hydroxybenzylidene)amino]indoline (XII). When 1-acetyl-6-[(p-hydroxybenzylidene)amino]indoline (XVI) was treated with 2,3-dihydro-5-methylfuran (II), two epimers of dl-7-acetyl-3,3a,4,5,7,8,9,10b-octahydro-4-(p-hydroxyphenyl)-10b-methyl-2H-furo[3,2-c]pyrrolo[3,2-g]quinoline (XVIIa and b) were obtained. dl-2,3,3a,4,5,6b,8,9,9a,10,11,12b-Dodecahydro-4,10-bis(p-methoxyphenyl)-6b,12b-dimethylfuro[3,2-c]furo[2′,3′:4,5]pyrido[2,3-g]quinoline (XX) was formed when 2,3-dihydro-5-methylfuran was allowed to react with N,N'-bis(p-methoxybenzylidene)-p-phenylcnediamine (XIX). Structure assignments were made from NMR spectra. None of the compounds exhibited appreciable biological activity.     

Design of postmetallocene Schiff base-like catalytic systems for polymerization of olefins: XII. Synthesis of tetradentate bis-salicylaldehyde imine ligands

Reactions of salicylaldehyde, 3-tert-butylsalicylaldehyde, and 3,5-di-tert-butylsalicylaldehyde with 1,4-diaminobutane, 1,6-diaminohexane, 4,4′-diaminodiphenylmethane, 4,4′-diamino-3,3′,5,5′-tetramethyldiphenylmethane, 4,4′-diamino-5,5′-dicyclopentyl-3,3′-dimethyldiphenylmethane, 4,4′-diamino-5,5′-dicyclohexyl-3,3′-dimethyldiphenylmethane, bis(4-aminophenyl) sulfone, o,o′- and p,p′-diaminodiphenyl ethers, 1,4-bis(4-aminophenoxy)benzene, 2,2-bis[4-(4-aminophenoxy)phenyl]propane, and 4,4″-diamino-p-terphenyl gave a series of the corresponding Schiff bases which can be used as tetradentate ligands for the synthesis of titanium and zirconium complexes.