Synthesis of barium titanate/polymer composites from metal alkoxide

Barium titanate (BaTiO₃)/polymer composite was successfully synthesized by methacryltriisopropoxytitanium (MTPT) and barium alkoxide. MTPT undergoes radical polymerization using azobisisobutyronitrile at temperatures from 90 to 150°C. ¹H NMR spectra showed that MTPT reacted with barium alkoxides yielding a complex alkoxide. BaTiO₃ particles/polymer was formed after the polymerization and hydrolysis of the complex alkoxide. The transmission electron microscopic observation revealed that crystalline BaTiO₃ particles of around 3 nm in size were dispersed in the polymer matrix.     

Alkoxy-derived fine powders of simple and complex oxides

Fine powders of ZrO₂, ZrO₂-Y₂O₃, BaTi_1–x Zr _x O₃ have been obtained by hydrolysis of alkoxides. For preparation of ZrO₂-based materials precipitation from the partially hydrolyzed alkoxides solutions (sols) has been used. Barium titanate-based materials were obtained by hydroxide-alkoxide route with quick hydrolysis of titanium butoxide by excess of water on the first stage. The effect of the hydrolysis conditions on the size, shape, and specific surface area of the oxide powders has been discussed. Some considerations on comparison of the two hydrolytic techniques have been suggested.     

Hydrothermal synthesis of the perovskite manganites Pr0.5Sr0.5MnO3 and Nd0.5Sr0.5MnO3 and alkali-earth manganese oxides CaMn2O4, 4H-SrMnO3, and 2H-BaMnO3

We report the synthesis of the perovskite manganites Pr_0.5Sr_0.5MnO₃ and Nd_0.5Sr_0.5MnO₃ using mild hydrothermal conditions. Both are formed as polycrystalline powders from solutions of metal salts in aqueous potassium hydroxide at 240 °C, and crystallise as a tetragonal polymorph (space group I4/mcm). Scanning electron microscopy shows both materials to contain cuboid-shaped crystallites several microns in dimension, and the average particle size is verified by light scattering measurements. We also report the first hydrothermal synthesis of 2H-BaMnO₃ and 4H-SrMnO₃, and the first subcritical hydrothermal synthesis of CaMn₂O₄ (marokite). Despite the formation of these alkali-earth manganese oxides at 240 °C, we have been unable to isolate rare-earth manganese oxides LnMnO₃ using similar conditions. We discuss the formation of perovskite manganites in hydrothermal reactions by relating our new results to those manganites already reported to form under hydrothermal conditions, and rationalise the trends seen by considering tolerance factor of the perovskite and the variance of the A-site metal radius.     

Hydrothermal synthesis, structure and property of nano-BaTiO3-based dielectric materials

A series of Ba_1-xSr_xTi_1-yZr_yO₃ (0≤x≤0.5, 0≤y≤0.4) and BA_1?xZn_xTi_1?ySn_yO₃ (0≤x≤0.3, 0≤y≤0.3) solid solutions were synthesized by low-temperature/low-pressure hydrothermal method below 170°C, 0.8 MPa. XRD pattern and cell parameters-composition figures of these prepared powders demonstrated that they are completely miscible solid solutions based on BaTiO₃. Furthermore, TEM showed that they have a shape of uniform, substantially spherical particles with an average particle size of 70 nm in diameter. The sintered ceramics of those powders doped by Sr²⁺ and Zr⁴⁺ or Zn²⁺ and Sn⁴⁺ have dielectric constant twelve times higher than and dielectric loss 1/6 those of pure BaTiO₃ phase at room temperature.     

BaTi<Subscript>1–x</Subscript>Zr<Subscript>x</Subscript>O<Subscript>3</Subscript> nanopowders prepared by the modified Pechini method

The results reported here based on a study of BaTi_1–xZr_xO₃ (x=0, 0.2 and 1) nanometric powders prepared by the modified Pechini method. The powder samples annealed from 600 to 1000°C/2 h were characterized by thermogravimetric analysis (TG), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The decomposition reactions of resins were studied using thermal analysis measurements. The barium titanate zirconate system presented just one orthorhombic phase. Furthermore, this study produced BaTiO₃ powders with a tetragonal structure using shorter heat treatments and less expensive precursor materials than those required by the traditional methods.     

Influence of Preparation Conditions on Crystallization Behavior of the Complex Alkoxide Derived PbTiO3 Powder

PbTiO₃ powders were prepared by hydrolysis of the complex alkoxide derived from Pb(OCOCH₃)₂ and Ti(OCH₂CH₃)₄, and their crystallization behaviors were investigated by DTA. Influence of conditions of synthesis and hydrolysis of the Pb-Ti complex alkoxide and heating atmosphere on crystallization behavior of powder was examined.Powders consisting of spherical particles with submicron diameter could be obtained by using the reaction time over 16 hr for synthesis, and the use of acetone-ethanol solvent with ammonia catalyst for the hydrolysis of the complex alkoxide. The resultant powders crystallized to tetragonal PbTiO₃ perovskite above 250°C under O₂ flow, and then transformed to cubic perovskite at 490°C. The powder heated at 250°C for 1 hr in O₂ consisted of well-crystallized tetragonal perovskite crystals of cubic shape of 0.2 to 1 µm in size.     

Hydrothermal synthesis, structure and property of nano-BaTiO3-based dielectric materials

A series of Ba_1-xSr_xTi_1-yZr_yO₃ (0≤x≤0.5, 0≤y≤0.4) and BA_1?xZn_xTi_1?ySn_yO₃ (0≤x≤0.3, 0≤y≤0.3) solid solutions were synthesized by low-temperature/low-pressure hydrothermal method below 170°C, 0.8 MPa. XRD pattern and cell parameters-composition figures of these prepared powders demonstrated that they are completely miscible solid solutions based on BaTiO₃. Furthermore, TEM showed that they have a shape of uniform, substantially spherical particles with an average particle size of 70 nm in diameter. The sintered ceramics of those powders doped by Sr²⁺ and Zr⁴⁺ or Zn²⁺ and Sn⁴⁺ have dielectric constant twelve times higher than and dielectric loss 1/6 those of pure BaTiO₃ phase at room temperature.     

Catalytic Combustion of Ethyl Acetate over Al2O3- Ce0.5Zr0.5O2 Supported Metal Oxide Catalysts

The catalysts for the combustion of ethyl acetate were prepared using Fe, Co, Cu, Cr, and Mn metal oxide as active components supported on Al₂O₃-Ce_0.5Zr_0.5O₂ mixed oxides and characterized by X-ray diffraction (XRD), temperature programmed reduction (TPR), oxygen storage capacity measurement, BET surface area, XPS measurement, and activity test. According to the results of characterization, it was found that Cu/Al₂O₃-Ce_0.5Zr_0.5O₂ (1:2, mass ratio) and Mn/Al₂O₃-Ce_0.5Zr_0.5O₂ (1:2) catalysts presented excellent activity for the catalytic combustion of ethyl acetate, because of the more reducible species and high reducibility of the catalysts. For ethyl acetate oxidation, more than 99% conversion was achieved at 245 °C over catalysts Cu/Al₂O₃-Ce_0.5Zr_0.5O₂ (1:2) and Mn/Al₂O₃-Ce_0.5Zr_0.5O₂ (1:2, mass ratio), indicating that the catalysts had great potential for wide use.     

Shift of Optical Absorption Edge in Sol-Gel Derived Transparent BaTiO3 Gels During Aging

Transparent barium titanate (BaTiO₃) wet gels synthesized by sol-gel processing using high-concentration Ba,Ti-alkoxide solution (1.0 mol/l) were subjected to optical measurements, X-ray diffraction analysis and transmission electron microscope observations. A systematic shift of the optical absorption edge was observed for the transparent BaTiO₃ wet gels shrinking during aging at 30 and 50°C, while no shift was observed for the wet gels aged at 5°C. The crystallinity and crystallite size of the gels increased with increasing aging time and temperature. The shift of the optical absorption edge of the BaTiO₃ gels during aging was found to have a close relation to an increase in the crystallite size of the gels.     

Reactions of Magnesium and Titanium Alkoxides. Preparation and Characterization of Alkoxy-Derived Magnesium Titanate Powders and Ceramics

The interaction between magnesium and titanium alkoxides is studied in order to chose the best precursors for synthesis of MgTiO₃. No reaction between magnesium and titanium methoxides and isopropoxides occurs. The solubility diagrams for Mg(OR)₂-Ti(OR)₄-ROH, R = Et,-Bu at 20°C are studied. Magnesium ethoxotitanates of variable composition Mg_nTi_4-n (OEt)_16-2n2nEtOH (n=2.0-0) which are structural analogs of Ti₄(OR)₁₆ (R = Me, Et) are isolated. This is a quite unusual example of statistical distribution of heteroatoms in molecular structures of metal alkoxides. Among the systems of metal alkoxides with simple aliphatic radicals only Mg(OBu)₂-Ti(OBu)₄-BuOH gives a convenient precursor for the synthesis of MgTiO₃. A simple scheme of preparation of magnesium titanate from the alkoxide solutions is suggested. The phase purity of MgTiO₃ is to a considerable extent dependent on the hydrolysis conditions. The alkoxy-derived magnesium titanate is obtained in the form of a uniform fine powder, it can be sintered into dense ceramics in the temperature range of 1140–1220°C which is 150–200°C lower in comparison with the conventional powders.     

Influence of barium source on the characteristics of sol-precipitated BaTiO<Subscript>3</Subscript> powders and related ceramics

In order to obtain pure and fine BaTiO₃ powders with controlled morphology, sol-precipitation methods involving the use of titanium iso-propoxide and of two different barium sources, i.e. barium nitrate and barium acetate, were proposed in this work. The thermal behaviour of the synthesized gels and the X-ray diffraction data obtained for the oxide powders pointed out that, by using Ba(NO₃)₂ as barium source, the decomposition process was completed at lower temperature (750°C) and was accompanied by a more pronounced tendency to obtain a single phase BaTiO₃ composition, by comparison with the synthesis where barium acetate was used as raw material (1100°C). Scanning electron microscopy investigations emphasized the effect of the nature of barium source and synthesis conditions on the morphology of the oxide powders, as well as on the microstructure of the related ceramics.     

Fabrication of Single-Phase BaTi4O9 Nanocrystalline Powder by Sol-Gel Process

BaTi₄O₉ nanocrystalline powder was prepared by sol-gel method using Ti(OC₄H₉)₄ and Ba(CH₃COO)₂ as raw materials. The optimum process was obtained by analyzing the synthesis condition of the single-phase BaTi₄O₉ nanocrystalline powder as follows: the content of acetyl-Titanium = 1 mol/L. pH = 4.2, molar ratio of water/alkoxide = 15, and the powder is kept at 1200°C for 2 h. The XRD and TEM analysis showed that the single-phase BaTi₄O₉ nanocrystalline powder of 30 nm in size was well prepared.     

Obtaining and sintering yttria stabilized zirconia (YSZ) powders from alkoxides

Amorphous zirconia ceramics powders containing 3 and 6 mol% yttria were prepared by controlled hydrolysis of alkoxides. Characterization of these powders was carried away by Thermal Analysis, X-ray Diffraction, Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Analysis (EDAX). The calcination temperature was optimized for compaction at a temperature ranging from 500–800°C. 3% molar YSZ powders from alkoxide, that attained 98% of the theoretical bulk density, showed the best behaviour.     

Al的加入对CeZr固溶体催化剂结构及其乙苯脱氢活性的影响

为进一步提高铈锆固溶体储放氧性能,增强乙苯二氧化碳氧化脱氢反应性能,采用共沉淀法合成出氧化铝质量比为50%的铈锆铝氧化物催化剂。通过现代仪器分析表征技术,研究了Al加入对铈锆固溶体复合氧化物晶体结构、储放氧能力的影响。结果表明,Al的加入可起到"扩散阻碍"作用,且有效抑制铈锆固溶体晶粒长大,使得铈锆铝氧化物催化剂比表面积较铈锆固溶体增加了51.8 m~2/g,储放氧性OSC值提高了69.4μmol/g,将铈锆铝氧化物催化剂用在乙苯氧化脱氢5 h反应中,发现乙苯转化率提高了10%。     

Sol-Gel Thin Films of BaFe12O19 from Chemically Modified Alkoxide Precursors

Homogeneous BaFe₁₂O₁₉ (BaM) thin films have been prepared by the dip-coating technique on microscope slides and SiO₂ wafers using barium and iron alkoxides as precursors, and diethanolamine as a modifier. In order to optimise the coating conditions, the influence of the alkoxide, water and modifier on the sol viscosity, thickness and appearance of the Fe₂O₃ films has been investigated. For comparison of the crystallisation and magnetic properties, powders of the same composition as the films have been also prepared by the sol-gel method. The BaM phase appears after annealing at 650°C for 6 hours. The BaM film and powder, heated at 850°C for 6 hours, give coercive force of about 3000 and 5500 Oe, respectively.     

Synthesis of PbTiO3 ceramics using mechanical alloying and solid state sintering

The pressure-less sintering behavior of PbTiO₃ powders synthesized by mechanical alloying TiO₂ and PbO was investigated using dilatometry and Rietveld refinements of X-ray diffraction patterns. As-synthesized, the powders are nanocrystalline with a mean particle size of 20 nm. Pressure-less sintering in the range 500-1050°C gives single phase ceramics with densities of 85-90% and crystallite sizes in the range 80-400 nm. Cracking due to the paraelectric-ferroelectric phase transition was not observed in samples sintered below 700°C due to the small crystallite size whereas macroscopic cracks formed in samples sintered above 700°C. Rietveld analysis indicates the formation of Pb vacancies in samples sintered and held for 24 h at intermediate temperatures (600-1000°C) which gives some insight into the mechanism of Pb loss and second phase formation in this system.     

Structure and surface properties of ZrO<Subscript>2</Subscript>, CeO<Subscript>2</Subscript>, and Zr<Subscript>0.5</Subscript>Ce<Subscript>0.5</Subscript>O<Subscript>2</Subscript> prepared by a microemulsion method according to X-ray diffraction,TPR, and EPR data

It was established by X-ray diffraction, TPR, and EPR that microemulsion (m.e.) synthesis yields the binary oxides ZrO₂(m.e.) and CeO₂(m.e.) and the mixed oxide Zr_0.5Ce_0.5O₂(m.e.) in the form of a tetragonal, cubic, and pseudocubic phase, respectively, having crystallite sizes of 5–6 nm. The bond energy of surface oxygen in the (m.e.) samples is lower than in their analogues prepared by pyrolysis. Hydrogen oxidation on the oxides under study occurs at higher temperatures than CO oxidation. ZrO₂(m.e.) and CeO₂(m.e.) are active in O₂⁻ formation during NO + O₂ adsorption, while CeO₂ is active during CO + O₂ adsorption, too. However, its amount here is one-half to one-third its amount in the pyrolysis-prepared samples, signifying a reduced number of active sites, which are Zr⁴⁺ and Ce⁴⁺ coordinatively unsaturated cations and Me⁴⁺-O²⁻ pairs. O₂⁻ radical anions are stabilized in the coordination sphere of Zr⁴⁺ coordinatively unsaturated cations via ionic bonding, and in the sphere of Ce⁴⁺ cations, via covalent bonding. Ionic bonds are stronger than ionic-covalent bonds and do not depend on the ZrO₂ phase composition. Zr_0.5Ce_0.5O₂ is inactive in these reactions because of the strong interaction of Zr and Ce cations. It is suggested that Ce^{(4 + β)+} coordinatively unsaturated cations exist on its surface, and their acid strength is lower than that of Zr⁴⁺ and Ce⁴⁺ cations in ZrO₂ and CeO₂, according to the order ZrO₂ > CeO₂ ≥ Zr_0.5Ce_0.5O₂. Neither TPR nor adsorption of probe molecules revealed Zr cations on the surface of the mixed oxide.     

Phase,crystal struture and sintering behavior of shock-synthesized Pb(Zr0.95Ti0.05)O3 powders

With a cylindrical shock-wave-loading technique, the single perovskite-phase Pb(Zr_0.95Ti_0.05)O₃ powders (PZT 95/5) were synthesized by shock-induced chemical reactions in heterogeneous multi-material powder mixtures of Pb₃O₄, ZrO₂ and TiO₂. The phase and crystal structure of as-synthesized powders were characterized by X-ray diffraction (XRD) and fourier transform infrared (FT-IR) analysis. And the microstructure and electrical properties of PZT 95/5 ceramics prepared with as-synthesized PZT powders at different sintering temperature were analyzed. The results showed that the shock-wave-induced a large quantity of lattice defects and distortion of the crystal structure in the shock-synthesized PZT powders, which could enhance the sintering activity. Thus, the optimal density and electrical properties of PZT ceramics prepared with as-synthesized powders could be obtained at a sintering temperature of 1200–1225 °C for 3 h, significantly lower than the sintering temperature of PZT 95/5 ceramics prepared by conventional solid-state reaction.     

Phase evolution,dielectric, ferroelectric,and piezoelectric properties of Bi(Mg0.5Hf0.5)O3–modified BiFeO3–BaTiO3

Bi(Mg_0.5Hf_0.5)O₃–modified BiFeO₃–BaTiO₃ ternary solid solutions of (0.725-x)BiFeO₃-0.275BaTiO₃-xBi(Mg_0.5Hf_0.5)O₃ (0 < x ≤ 0.05, abbreviated as BFO-BTO-xBMHO) were prepared for lead-free piezoelectrics. The addition of BMHO delivers a rhombohedral (R3c, denoted as R-phase) to tetragonal (P4mm, denoted as T-phase) phase transition at x = 0.05, giving the coexistence of R- and T-phase in intermediate compositions: R-phase dominated in x = 0.01–0.02 and T-phase dominated in x = 0.03–0.04. The increment of BMHO tunes the grain size, lowers the ferroelectric transition temperature (T_C) and dielectric loss (tanδ), and drives a gradually ferroelectric to relaxor transition. The morphotropic phase boundary between the R-and T-phases, together with the homogeneous morphology, results in the best performance for x = 0.04 case with piezoelectric d₃₃ of 130 pC/N, K_p of 0.286, Q_m of 58.993, electrostrain S_max of 0.18%, and T_C of 428 °C, showing potential applications for lead-free piezoelectric ceramics at considerably high temperature.