Structure/permeability relationships of polyimides with branched or extended diamine moieties

Mean permeability coefficients for CO₂, O₂, N₂, and CH₄ in seven types of 6FDA polyimides with branched or extended diamine moieties were determined at 35.0°C (95.0°F) and at pressures up to 10.5 atm (155 psia). In addition, solubility coefficients for CO₂, O₂, N₂, and CH₄ in six of these polyimides were determined at 35.0°C and at 6.8 atm (100 psia). Mean diffusion coefficients for the six gas/polyimide systems were calculated from the permeability and solubility data. The relationships between the chemical structure of the polyimides, some of their physical properties (glass transition temperature, mean interchain spacing, specific free volume), and their gas permeability, diffusivity, and solubility behavior are discussed. The 6FDA polyimides studied here exhibit a considerably lower selectivity for the CO₂/CH₄ and O₂/N₂ gas pairs than 6FDA polyimides with short and stiff aromatic diamines with comparable CO₂ and O₂ permeabilities. © 1993 John Wiley & Sons, Inc.     

Gas‐transport properties of indan‐containing polyimides

A series of indan‐containing polyimides were synthesized, and their gas‐permeation behavior was characterized. The four polyimides used in this study were synthesized from an indan‐containing diamine [5,7‐diamino‐1,1,4,6‐tetramethylindan (DAI)] with four dianhydrides [3,3′4,4′‐benzophenone tetracarboxylic dianhydride (BTDA), 3,3′4,4′‐oxydiphthalic dianhydride (ODPA), (3,3′4,4′‐biphenyl tetracarboxylic dianhydride (BPDA), and 2,2′‐bis(3,4′‐dicarboxyphenyl) hexafluoropropane dianhydride (6FDA)]. The gas‐permeability coefficients of these four polyimides changed in the following order: DAI–BTDA < DAI–ODPA < DAI–BPDA < DAI–6FDA. This was consistent with the increasing order of the fraction of free volume (FFV). Moreover, the gas‐permeability coefficients were almost doubled from DAI–ODPA to DAI–BPDA and from DAI–BPDA to DAI–6FDA, although the FFV differences between the two polyimides were very small. The gas permeability and diffusivity of these indan‐containing polyimides increased with temperature, whereas the permselectivity and diffusion selectivity decreased. The activation energies for the permeation and diffusion of O₂, N₂, CH₄, and CO₂ were estimated. In comparison with the gas‐permeation behavior of other indan‐containing polymers, for these polyimides, very good gas‐permeation performance was found, that is, high gas‐permeability coefficients and reasonably high permselectivity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2769–2779, 2004     

Gas permeability and permselectivity of polyimides with large aromatic rings

Polyimides with large aromatic rings were prepared from 3,6-diaminocarbazole (CDA), N-ethyl-3,6-diaminocarbazole (ECDA), 2,7-diaminofluorene (DAF), 2,7-diaminofluorenon (DAFO), and dimethyl-3,7-diaminodibenzothiophene-5,5-dioxide (DDBT) with 2-bis(2,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA) and 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA). Their physical properties, including gas permeability and permselectivity, were investigated in comparison with those of the related polyimides from 1,3-phenylenediamine (mPD). Glass transition temperatures of the polyimides with large aromatic rings were much higher than those of the mPD-based polyimides as a result of increased rigidity of the former polymer chains. With changing diamine from mPD to the large aromatic diamines, charge transfer (CT) interaction between the moieties of acid anhydride and diamine seems to be enhanced, judging from the red shift of absorption edge of the polyimide films and the red shift of CT excitation band of the 6FDA-based polyimides in solution. Fraction of free space (V_F) was a little smaller for the polyimides with large aromatic rings except DDBT than for the mPD-based polyimides, probably because of enhancement in polymer chain-chain interactions as a result of the increased CT interaction. The DDBT-based polyimides had large V_F than the mPD-based polyimides because of the nonplanar structure of neighboring dibenzothiophene-5,5-dioxide and imide rings. For the 6FDA-based polyimides, permeability coefficients to H₂, O₂, N₂, CO₂, and CH₄ were in the order, DAFO < mPD ～ DAF < CDA < ECDA < DDBT. As for the membrane performance for H₂/CH₄, CO₂/CH₄, and O₂/N₂ systems, it is significant to change diamine from mPD to DDBT or CDA, but not to DAF or DAFO. The DDBT-based polyimides were excellent for H₂/CH₄ and CO₂/CH₄ separations. © 1995 John Wiley & Sons, Inc.     

Permeability,permselectivity, and penetrant‐induced plasticization in fluorinated polyimides studied by positron lifetime measurements

The ortho‐positronium (o‐Ps) lifetime τ₃ and its intensity I₃ in various fluorinated polyimides were determined by the positron annihilation technique and were studied with the spin–lattice relaxation time T₁ and the propylene permeability, solubility, diffusivity, and permselectivity for propylene/propane in them. τ₃, I₃, and the distribution of τ₃ changed when the bulky moieties in the polyimides were changed. The polyimides, having both large τ₃ and I₃ values, exhibited a short T₁ and a high permeability with a low permselectivity. The propylene permeability and diffusivity were exponentially correlated with the product of I₃ and the average free‐volume hole size estimated from τ₃. In highly plasticized states induced by the sorption of propylene, the permeability increased with the propylene pressure in excellent agreement with the change in the free‐volume hole properties probed by o‐Ps. The large and broad distribution of the free‐volume holes and increased local chain mobility for the 2,2‐bis(3,4‐decarboxyphenyl) hexafluoropropane dianhydride‐based polyimides are thought to be important physical properties for promoting penetrant‐induced plasticization. These results suggest that o‐Ps is a powerful probe of not only the free‐volume holes but also the corresponding permeation mechanism and penetrant‐induced plasticization phenomenon. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 308–318, 2003     

Solubility and transport of water vapor in some 6FDA-based polyimides

Permeability, diffusion, and solubility coefficients for H₂O vapor in four different 6FDA-based polyimides were determined at temperatures between 25 and 45°C and over a wide range of relative humidities. The solubility of H₂O vapor in some of the polyimides studied can be described by the “dual-mode sorption” model whereas in other polyimides it is represented by the Flory-Huggins equation, which suggests that the latter polymers are plasticized by H₂O. The solubility of H₂O vapor in the polyimides decreases as the temperature is raised and increases with increasing polarity of the polymer. The diffusion coefficients for H₂O in the polyimides studied either increase or pass through a weak maximum with increasing H₂O activity, or concentration in the polymers. The latter behavior is probably due to a clustering of H₂O molecules in the polyimides at higher H₂O activities or concentrations. The diffusion coefficients for H₂O decrease as the chain-packing density of the polyimides increases. The permeability coefficients for H₂O vapor in 6FDA-based polyimide membranes either increase slightly or are constant as the H₂O activity is increased. The experimental values of the permeability coefficients are consistent with the values determined from diffusion and solubility coefficients. The permeability of the polyimides to H₂O vapor appears to be controlled by the solubility of H₂O in the polymers. The polyimides studied exhibit a very high selectivity for H₂O vapor relative to CH_4, and therefore are potentially useful membrane materials for the dehydration of natural gas. ©1995 John Wiley & Sons, Inc.     

Sorption of carbon dioxide in fluorinated poyimides

Sorption isotherms of CO₂ for ten fluorinated polyimides measured at 35°C and up to about 25 atm are analyzed according to the dual-mode sorption model. Sorption properties for these polyimides are compared with those for other glassy Polymers including unfluorinated polyimides. The glassy polymers with higher glass transition temperatures T_g tend to show greater CO₂ sorption. Introduction of a ? C (CF₃)₂? linkage into the repeat unit of the main chain increases the sorption by 20–80%. For glassy polymers, including the fluorinated and unfluorinated polyimides, the Langmuir affinity constant b and Henry's law solubility constant k_D are correlated with the content of functional (carbonyl or sulfonyl) groups [FG], and composite parameter reflecting the magnitude of both [FG] and free-space fraction V_F, respectively, with some exceptions. The Langmuir capacity constant C′_H is correlated with T_g, but there are two correlation lines; one for unfluorinated polyimides and a different one for other glassy polymers including fluorinated polyimides. The slope of the former group is smaller probably because of smaller differences in thermal probably because of smaller differences in thermal expansion coefficients in rubbery and glassy states. Most fluorinated polyimides show greater solubility of CO₂ than unfluorinated polyimides and other glassy polymers, because of their larger C′_H and k_D. © 1993 John Wiley & Sons, Inc.     

Relationships between chemical structures and solubility,diffusivity, and permselectivity of 1,3-butadiene and n-butane in 6FDA-based polyimides

The solubility, diffusivity, and permselectivity of 1,3-butadiene and n-butane in seven different polyimides synthesized from 2,2-bis (3,4-carboxyphenyl) hexafluoropropane dianhydride (6FDA) were determined at 298 K. The influence of chemical structures on physical and gas permeation properties of 6FDA-based polyimides was studied. Solubility of 1,3-butadiene in 6FDA-based polyimides can be described by a dual-mode sorption model. 1,3-Butadiene-induced plasticization is considered to be associated with the increasing permeabilities of 1,3-butadiene and n-butane and the decreasing permselectivity of 1,3-butadiene vs. n-butane in the mixed gas system containing a high concentration of 1,3-butadiene. It was found that controlling the solubility of 1,3-butadiene in an unrelaxed volume in 6FDA-based polyimides is very important to maintain the high permselectivity of 1,3-butadiene vs. n-butane in the mixed gas system. Changing the  C(CF₃)₂ linkage to a  CH₂ ,  O linkage, removing methyl substituents at the ortho position of the imide linkage, and changing the p-phenylene linkage to an m-phenylene linkage in the main chains in some 6FDA-based polyimides are effective to decrease fractional free volume and restrict the solubility of 1,3-butadiene in the unrelaxed volume of a polymer matrix. The 6FDA-based polyimides restricting the solubility of 1,3-butadiene in an unrelaxed volume exhibit high separation performance in the 1,3-butadiene/n-butane mixed gas system compared with conventional glassy polymers and, therefore, are potentially useful membrane materials for the separation of 1,3-butadiene and n-butane in the petrochemical industry. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2941–2949, 1999     

Characterization and gas permeability of a three-component polyimide series

Packing density and gas permeability of a three-component copolymide series is presented. The three-component polyimides are prepared a via “stepwise” synthesis procedure that goes through the acid anhydride terminated pre-polymer. The procedure ensures the statistical distribution of segments of the polymers. The polyimide series is composed of contrasting segments: a bulky and rigid hexafluoroisopropylidene-2,2-bis(phthalic acid anhydride)/9,9,-bis(4-aminophenyl)fluorene and a flexible hexafluoroisopropylidene-2-2-bis(phthalic acid anhydride)/2,2-bis[4-(4-aminophenoxy)phenyl]hexafluoropropane, with varying segment ratio. Generation of additional free volume by compolymerizing two segments is observed. The permeability of six pure gases—He, H₂, N₂, O₂, CH₄, and CO₂—to the polymides showed positive deviation from the simple additivity rule of segment weight ratio reflecting the generation of free volume. However, a conflicting result between free volume fraction and gas permeability is observed, which may be due to a difference of the nature of free volume of each segment. © 1994 John Wiley & Sons, Inc.     

Copolyimides containing alicyclic and fluorinated groups: Solubility and gas separation properties

A series of polyimides with alicyclic and fluorinated moieties previously synthesized were studied for gas separation applications. The solubility behavior of polyimides in various solvents was analyzed through the solubility parameter approach. Permeability coefficients and ideal selectivities were determined for common gases, that is, He, H₂, O₂, and N₂. Polyimide permeabilities were correlated to an improvement of the soluble character and were increased by the introduction of both alicyclic and fluorinated structures. The effect of the casting solvent on gas separation properties was also pointed out. It was found that it is enhanced with increasing diameters for the gas molecules. Finally, some correlations between permeability coefficients and microstructural parameters were discussed. The probability of correlation appears to be also dependent on the diameter and on the polarizability of the gas molecule. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2413–2426, 2005.     

Transport properties of polyimides derived from benzophenonetetracarboxylic dianhydride and other diamines

Gas-separating membrane characteristics of polyimide films composed of the common fragment of benzophenone-3,3′,4,4′-tetracarboxylic dianhydride and diamines of varying structure were studied. Permeability coefficient P, diffusion coefficient D, and solubility coefficient S for H₂, CO, CO₂, and CH₄ were determined. The polyimide derived from m-phenylenediamine exhibited the best gas-separating properties. A relationship between the chain rigidity, free volume, and transport parameters (P, D, S, and selectivity) of polyimide was established on the basis of the data. It was shown that there is an optimal chain rigidity for the studied polyimides that results in polymer structurization during film preparation and corresponds to high separation selectivity.     

Synthesis and properties of nonlinear optical side chain soluble polyimides for photonics applications

Aromatic polyimides with side chain nonlinear optical chromophores have been investigated through a facile two-step synthetic route. First, various poly(hydroxy imide)s have been synthesized by direct thermal imidization of diaminophenol dihydrochloride salt and aromatic dianhydride monomers. The resulting polyimides bearing phenolic hydroxy groups were found to react easily with the terminal hydroxy group on the chromophores via the Mitsunobu condensation to give corresponding polyimides with high optical nonlinearities and good solubility in common organic solvents. Detailed physical properties showed that these polyimides have a molecular weight (M_w) of 31,000 and high glass transition temperature above 220°C, ensuring a long-term alignment stability at elevated temperature. The electrooptic coefficients, r₃₃, of the electrically poled polymer films were in the range 1.8–7.6 pm/V at 1.3 μm. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 301–307, 1998     

Gas transport properties of soluble poly(phenylene sulfone imide)s

Gas transport of helium, hydrogen, carbon dioxide, oxygen, argon, nitrogen, and methane in three soluble poly(phenylene sulfone imide)s based on 2,2-bis(3,4-decarboxyphenyl) hexafluoropropane dianhydride (6FDA) has been investigated. The effects of increasing length of well-defined oligo(phenylene sulfone) units on the gas permeabilities and diffusivities were determined and correlated with chain packing of the polymers. Activation energies of diffusion and permeation were calculated from temperature-dependent time-lag measurements. The influences of the central group in the diamine moiety of 6FDA-based polyimides on physical and gas transport properties are discussed. The incorporation of a long oligo(phenylene sulfone) segment in the polymer backbone decreases gas permeability and permselectivity simultaneously. The decreases in permeability coefficients can be mainly related to decreases in diffusion coefficients. Changing the central group of diamine moiety from  S to  SO₂ leads to a 45–50% decrease in CO₂ and O₂ permeabilities without appreciable increase in the selectivities. This is considered to be due to the formation of charge transfer complexes. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1855–1868, 1997     

Synthesis and properties of novel regioirregular polyimides from easily synthesized asymmetrical dichlorophthalimide monomers

New asymmetrical aromatic dichlorophthalimide monomers containing pendant groups (trifluoromethyl or methyl) were conveniently prepared from inexpensive and commercially available compounds. With these monomers, a new class of soluble polyimides with a regioirregular structure within the polymer backbone was obtained by the Ni(0)‐catalyzed polymerization method. The structures of the polymers were confirmed by various spectroscopic techniques. The polyimides displayed better solubility and higher thermal stability than the corresponding regular polyimides. In addition, fluorinated polyimides in this study had low dielectric constants ranging from 2.52 to 2.78, low moisture absorptions of less than 0.59%, and low thermal expansion coefficients between 10.6 and 19.7 ppm/°C. The oxygen permeability coefficients and permeability selectivity of oxygen to nitrogen of the films were in the ranges of 2.99–4.20 barrer and 5.55–7.50, respectively. We have demonstrated that the synthetic pathway for polyimides provides a successful approach to increasing the solubility and processability of polyimides without sacrificing their thermal stability. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3550–3561, 2007     

Relationships between the chemical structures and the solubility,diffusivity, and permselectivity of propylene and propane in 6FDA‐based polyimides

The solubility, diffusivity, and permselectivity of propylene and propane in 40 different polyimides synthesized from 2,2‐bis(3,4‐decarboxyphenyl)hexafluoropropane dianhydride (6FDA) were determined at 298 K. The influence of the chemical structures on the physical and gas permeation properties of the 6FDA‐based polyimides was studied. The solubility of propylene in an unrelaxed volume of a polymer matrix mainly contributes to the total solubility of propylene for various 6FDA‐based polyimides. The diffusivity, the permeability of propylene, and the permselectivity in the propylene/propane mixed‐gas system depend on the solubility of propylene. This is thought to be associated with the penetrant‐induced plasticization effect. 6FDA‐based polyimides, which have a high glass‐transition temperature and a large fractional free volume, exhibit a high permeability with a relatively low permselectivity. Changing the number of  CH3 substituents in the phenylene linkage and changing the connectivity in the main chain are good ways of controlling the solubility of propylene and the corresponding permselectivity in the propylene/propane mixed‐gas system. Some 6FDA‐based polyimides restrict the solubility of propylene through the introduction of a  CONH linkage between the phenylene linkage; the  Cl substituent in the phenylene linkage at the diamine moiety exhibits a high separation performance in the mixed‐gas system. The polyimides are potentially useful membrane materials for the separation of propylene and propane in the petrochemical industry. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2525–2536, 2000     

Effects of substituent groups of polyimides on sorption and diffusion of gases

Sorption rate curves of CO₂, N₂, and He gases below 1 atm were measured for polyimide films prepared from benzophenone tetracarboxylic dianhydride (BTDA) with 3,5-diaminotoluene trifluoride (DATF), 2,4-diaminotoluene (DAT), m-phenylenediamine (MPD), and diaminobenzoic acid (DABA). The molecular structures of these four polyimides differ only in the substituent groups of the diamine structure. These polyimides exhibit dualmode type sorption isotherms for carbon dioxide that are concave to the pressure axis, typical of glassy polymer/gas system. The apparent diffusion coefficients below 1 atm pressure of carbon dioxide for this series of compounds decrease in the order: BTDA-DATF > BTDA-DAT > BTDA-MPD > BTDA-DABA. A linear relation between the logarithm of the apparent diffusion coefficient and the reciprocal of free volume, calculated by the method of Bondi using density data, is found for these polyimides. However, this tendency is not observed for the other two gases. The activation energies of the apparent diffusion coefficients at 20 cmHg pressure of carbon dioxide increase with increasing cohesive energy density of the polyimides. The energy per mole of free volume elements in a liquidlike structure in each cohesive energy density may be equated to the activation energy and used to calculate the free volume. The values from the activation energy are almost the same as those from Bondi's method.     

Synthesis and characterization of spirobifluorene‐based polyimides

The synthesis and properties of organosoluble aromatic polyimides, containing spiro‐skeletal units in the polymer backbone on the basis of the spiro‐diamine monomer, 2,2′‐diamino‐9,9′‐spirobifluorene, are described. In the case of the spiro segment, the two fluorene rings are orthogonally arranged and connected through a tetrahedral bonding carbon atom, the spiro center. As a consequence, the polymer chain is periodically zigzagged with a 90° angle at each spiro center. This structural feature minimizes interchain interactions and restricts the close packing of the polymer chains, resulting in amorphous polyimides that have good solubility in organic solvents. Compared with their fluorene‐based cardo analogues, the spirobifluorene‐based polyimides have an improved solubility. Furthermore, the main‐chain rigidity of the polyimide appears to be preserved because of the presence of the spiro structure, which restricts the free segmental mobility. As a result, these polyimides exhibit a high glass‐transition temperature (T_g's) and good thermal stability. The T_g's of these polyimides were in the range of 287–374 °C, and the decomposition temperatures in nitrogen for a 10% weight loss occurred at temperatures above 570 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3615–3621, 2002     

Triphenylamine‐based polyimides with trimethyl substituents for gas separation membrane and electrochromic applications

Two series of polyimides I – II with methyl‐substituted triphenylamine units were prepared from the diamines, 4,4′‐diamino‐2″,4″,6″‐trimethyltriphenylamine (Me₃TPA‐diamine; 1 ) and 4,4′‐diamino‐4″‐methyltriphenylamine (MeTPA‐diamine; 2 ), and two commercially available tetracarboxylic dianhydrides via a conventional two‐step chemical imidization. All the polymers were readily soluble in many polar solvents and showed useful levels of thermal stability associated with high glass transition temperatures (266–340 °C) and high char yields (higher than 49% at 800 °C in nitrogen). The polymer films showed reversible electrochemistry/electrochromism accompanied by a color change from neutral pale yellow to green oxidized form with good coloration efficiency, switching time, and stability. The CO₂ permeability coefficients (P_CO2) and permeability selectivity (P_CO2/P_CH4) for these polyimide membranes were in the range of 34.1–229.2 barrer and 21.3–28.9, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Design,synthesis, and gas permeation properties of polyimides containing pendent imidazolium groups

Film‐forming polymers containing ionic groups have attracted considerable attention as emerging materials for gas separation applications. The aim of this article was to synthesize new film‐forming polyimides containing imidazolium groups (PI‐IMs) and establish their structure–performance relationship. In this context, a new aromatic diamine, namely, N¹‐(4‐aminophenyl)‐N¹‐(4‐(2‐phenyl‐1H‐imidazol‐1‐yl)phenyl)benzene‐1,4‐diamine (ImTPADA), was synthesized and polycondensed with three aromatic dianhydrides, namely, 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, 4,4‐(4,4‐isopropylidenediphenoxy) bis(phthalic anhydride), and 4,4′‐oxydiphthalic anhydride to form the corresponding polyimides containing pendent 2‐phenylimidazole groups (PI‐IEs). Next, PI‐IMs were prepared by N‐quaternization of pendent 2‐phenylimidazole groups present in PI‐6FDA using methyl iodide followed by anion exchange with bis(trifluoromethane)sulfonimide lithium salt (LiTf₂N). PI‐IEs and PI‐IMs exhibited reasonably high molecular weights, amorphous nature, good solubility, and could be cast into self‐standing films from their DMAc solutions. Thermogravimetric analysis showed that 10% weight loss temperature of PI‐IEs and PI‐IMs were in the range 545–475 °C and 303–306 °C, respectively. Gas permeability analysis of films of PI‐IEs and PI‐IMs was investigated by variable‐volume method and it was observed that incorporation of ionic groups into PI‐6FDA resulted in increased permeability while maintaining selectivity. In particular, polymer bearing Tf₂N⁻ anion exhibited high CO₂ permeability (33.3 Barr) and high selectivity for CO₂/CH₄ (41.1) and CO₂/N₂ (35.4). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1721–1729     

Synthesis and characterization of polyimides from imidazole-blocked 2,5-bis[(n-alkyloxy)methyl]-1,4-benzene diisocyanates and pyromellitic dianhydride

From imidazole-blocked 2,5-bis[(n-alkyloxy)methyl]-1,4-benzene diisocyanates and pyromellitic dianhydride a series of new rigid-rod polyimides (C_n-PY-PI; n = 4, 6, 8) having linear and flexible (alkyloxy)methyl ((SINGLE BOND)CH₂OC_nH_{2n + 1}; n = 4, 6, 8) side chains were prepared and characterized and their properties were measured and discussed with regard to effects of side chains. Incorporation of the side chains onto the rigid main chain greatly enhanced the solubility and fusibility of the polymers, and melting point of C₈-PY-PI was determined to be 277°C. The UV-VIS absorption behavior was independent of side-chain length. TGA thermograms revealed a two-step pyrolysis behavior, in which the side chains split off separately at lower temperatures. X-ray diffractograms showed that all the polyimides are crystalline at room temperature. Sharp reflections in small-angle region obviously indicated the presence of a layered crystal structure. © 1996 John Wiley & Sons, Inc.     

Effect of substituents on the permeation properties of polyamide membranes

Aromatic polyamides, designed for evaluation as gas separation membranes, were processed into dense films, whose properties were measured with special emphasis on their mechanical and thermal properties. The polymers had been synthesized from monomers bearing side substituents, such as methyl, iso-propyl or tert-butyl, and various hinge-like connecting linkages of p-phenylene moieties, which yielded amorphous aromatic polyamides, with improved solubility, high glass transition temperatures (over 250 °C) and excellent mechanical properties (tensile strength about 100 MPa, and moduli about 2.0 GPa). The permeability of the polymer films were investigated using helium, oxygen, nitrogen, carbon dioxide and methane. Gas permeability typically increased with increasing free volume, and, in general, free volume could be related to the chemical structure. The analysis of the transport parameters (permeability, diffusivity and solubility coefficients) as a function of the chemical structure, confirmed the predominant role of the side substituents and of the linking groups connecting phenylene units on the permeation properties. Besides, a molecular modelling study carried out via computational chemistry, made it clear that an acceptable theoretical explanation can be given of how the nature of hinge groups between aromatic rings can affect torsional mobility and gas diffusion of aromatic polyamides.

The experimental aromatic polyamides of this report, as a whole, showed a favourable combination of permeability–selectivity, better than that of conventional polyamides and that of most engineering thermoplastics, confirming the hypothesis that the incorporation of side bulky substituents is a convenient approach to hinder the inherently efficient chain packing of polyamides.