Interpenetrating polymer networks of poly(carbonate-urethane) and polymethyl methacrylate

We report the synthesis and characterization of interpentrating polymer networks (IPN's), pseudo INPN's, and blends of urethane-containing aliphatic polycarbonates (PCU) and polymethyl methacrylate (PMMA). The simultaneous full IPN's of PCU's and PMMA over the whole composition range have only one T_g, as determined by DSC and DMA which, together with transmission electron microscopy observations, suggest a single phase morphology even though the linear chain blends are completely immiscible. The full IPN's exhibit a maximum tensile strength at a certain composition, and superior solvent and heat resistance as compared to the pseudo IPN's, linear blends, and the pure crosslinked PCU's and PMMA.     

Interpenetrating polymer networks of poly(carbonate-urethane) and polystyrene

Simultaneous two-component interpenetrating polymer networks (IPN's), pseudo IPN's, and linear blends of urethane-containing aliphatic polycarbonate (PCU) and polystyrene (PS) have been synthesized and characterized. The simultaneous full IPN's of PCU and PS had one T_g only at compositions above 50 wt % PCU, as determined by DSC and DMA. The single phase morphology in the one T_g region was confirmed by transmission electron microscopy (TEM). However, the pseudo IPN's and linear blends of PCU and PS exhibited multiple (melting and glass) transitions by DSC measurements and phase separation was observed by TEM over the whole composition range. The full IPN's exhibited a maximum in ultimate mechanical properties at an intermediate composition. Superior solvent resistance as well as better thermal stability was shown by the IPN's as compared to the pseudo IPN's linear blends, and pure crosslinked components.     

Interpenetrating polymer networks of polycarbonate-urethane and polybutadiene

Interpenetrating polymer networks (IPN's), pseudo IPN's and linear blends of urethane-containing aliphatic polycarbonate (PCU) and polybutadiene (PB) have been prepared and characterized. The simultaneous full IPN's of PCU and PB over the whole composition range (15-85% by weight PCU) exhibit a single phase morphology even though the linear chain blends are completely immiscible, as determined by DSC and confirmed by transmission electron microscopy (TEM). However, in both pseudo IPN's of PCU and PB there appeared multiple (melting and glass) transitions in DSC measurements and phase separation was observed by TEM. © 1992 John Wiley & Sons, Inc.     

Interpenetrating polymer networks of poly(carbonate-urethane) and polyvinyl pyridine

Simultaneous interpenetrating polymer networks (IPN's), pseudo IPN's, and liner blends of aliphatic poly(carbonate-urethane) (PCU) and polyvinyl pyridine (PVP) have been prepared and characterized by DSC, DMA, and TEM. The full IPN's of PCU and PVP had a single phase morphology only above 50 wt % PCU, as determined by both DSC and DMA and confirmed by transmission electron microscopy (TEM). However, in both pseudo IPN's of PCU and PVP and in their linear blends there exist multiple glass transitions and melting points seen by DSC and DMA indicating phase incompatibility. The full IPN's exhibited superior ultimate mechanical properties and solvent resistance as compared to the pseudo IPN's, liner blends, and the pure crosslinked PCU and PVP networks.     

Interpenetrating polymer networks based on poly(chloroprene) and poly(carbonate-urethane)

Simultaneous interpenetrating polymer networks (SIN's) of poly(chloroprene) (CR) and poly(carbonate-urethane) (PCU) were prepared and characterized. The effect of composition on the phase morphology of full IPN's of CR/PCU has been studied by DSC and SEM. A single phase morphology of IPN's has achieved when the content of CR component is below 50 wt %. The microphase separation of the component networks in the IPN's occurred in samples whose weight percentage of the CR component was 50% and higher. © 1993 John Wiley & Sons, Inc.     

SWELLING DYNAMICS OF A TERNARY INTERPENETRATING POLYMER NETWORK (IPN) AND CONTROLLED RELEASE OF POTASSIUM NITRATE AS A MODEL AGROCHEMICAL

ABSTRACT

An interpenetrating polymer network (IPN) of carboxymethyl cellulose (CMC), polyethylene glycol (PEG) and crosslinked polyacrylamide (PAM) has been prepared and dynamic water sorption properties have been investigated as a function of chemical architecture of the IPN, pH and temperature of the swelling medium and presence of salt ions in the bathing medium. Based on the Fick's law the swelling exponent (n) and diffusion constant (D) were evaluated suggesting possible modes of water transport through the IPN's. The IPN's synthesized were loaded with KNO₃ as a representative agrochemical and its release dynamics was studied conductometrically. The influences of percent loading and chemical composition of the IPN were also observed on the release rate and released amounts of KNO₃.     

Phase behavior of pseudo-IPN's of polycarbonate-urethane and polystyrene

The pseudo-IPN's of PCU/PS with different M_n and narrow MWD of the linear PS have been synthesized and characterized. The effect of M_n and composition on the phase morphology of the pseudo-IPN's of PCU/PS has been studied by DSC and SEM. The pseudo-IPN's with ultra-high M_n of the linear PS appeared to possess a single T_g and no SEM-resolvable domains at 35 wt % PS and below. This metastable state may reflect the result of a high extent of entanglement of the linear PS chains with the PCU network and the limited molecular mobility of the linear PS chains with high M_n. © 1993 John Wiley & Sons, Inc.     

Structures induced by irradiation of femto-second laser pulse in polymeric materials

We investigated the structures induced by irradiation of near-infrared femto-second laser pulse in various polymer materials; olefin gel, acrylic adhesive, poly(ether sulphone) (PES), poly(methyl methacrylate) (PMMA), polycarbonate (PC), and block copolymers of methyl-methacrylate and ethyl acrylate-butyl acrylate. Line irradiation that was performed by scanning laser spots in polymer bulk formed volcano-like upheaval structures on the surfaces of PES, PMMA, and PC, which have relatively high glass-transition temperatures (T_g's); on the other hand, cave or channel structures on the surfaces of olefin gel and acrylic adhesive have low T_g's. For the block copolymers containing both low and high T_g's, aggregation of the submicron scale deposit was induced in the polymer bulk. The submicron scale deposit may be reproduced structures after photodecomposition or photocrosslinking of polymer-chain components induced by multiphoton excitation with femto-second laser irradiation. This deposit aggregation with a stripelike structure had different optical properties from the un-irradiated region. These structures induced by irradiation of femto-second laser pulse might be applicable for optical devices such as diffraction grating and optical guide. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 537–544, 2002; DOI 10.1002/polb.10111     

Synthesis and polymerization of new di‐octadecyl ester derivatives of α‐hydroxymethyl acrylate: A structure‐property correlation for their copolymers with methyl methacrylate

New ether dimer (ED‐Od) and diester (ODE) derivatives of α‐hydroxymethylacrylate, each having two octadecyl side chains, were synthesized and (co)polymerized to evaluate the effects of differences in the structures of the monomers on final (co)polymer properties, particularly glass transition temperature. The free radical polymerizations of both monomers yielded high‐molecular weight polymers. Cyclopolymer formation of ED‐Od was confirmed by ¹³C NMR analysis and the cyclization efficiency (0.95 or greater) was found to be as high as the cyclization efficiencies of the cyclopolymerizations of ether dimers of various alkyl α‐hydroxymethylacrylates synthesized previously. Copolymers of both ED‐Od and ODE with methyl methacrylate (MMA) showed significant T_g decreases over PMMA due to octadecyl side groups causing “internal” plasticization. Comparison of the T_g's of the copolymers of octadecyl methacrylate, ED‐Od and ODE with MMA revealed that the impacts of these monomers on depression of T_g's are identical. That is, the magnitude of decrease in T_g's was quantitatively related to the number of the octadecyl side groups in the copolymers rather than their placement on the same or randomly incorporated repeat units. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7785–7793, 2008     

Indentation of poly(methyl methacrylate) under high‐pressure gases

The variation of the indentation hardness of a high molecular weight poly(methyl methacrylate) (PMMA) subjected to CO₂ and Ar at high pressure was measured in situ. The samples were subjected to gas exposure for 3 h at 40 °C before a conical indenter of an included angle at 105 °, with a fixed load of 0.237 kg, was applied for a loading time of 60 s. The data show that both CO₂ and Ar reduce the hardness of PMMA to a comparable extent at low pressures. The hardness of PMMA subjected to Ar indicates a minimum at about 4 MPa and then increases. CO₂ produced a monotone decreasing trend in hardness in the pressure range studied, and the glass‐transition temperature (T_g) was achieved at about 6.0 MPa. The change in hardness is attributed to plasticization of the polymer matrix that is more extensive for CO₂. The relationship between the change in hardness for this PMMA subjected to high‐pressure CO₂, the corresponding change in the T_g, and the associated swelling of the polymer is discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 3020–3028, 2001     

Graft copolymers via combination of cationic polymerization and atom transfer radical polymerization and their phase separation into spherical/worm-like nanostructures

Poly(p-chloromethyl styrene)-graft-poly(methyl methacrylate) (PCMS-g-PMMA) and poly(p-chloromethyl styrene)-graft-poly(benzyl methacrylate) (PCMS-g-PBzMA) graft copolymers with asymmetric branches are synthesized via the combination of cationic polymerization and atom transfer radical polymerization (ATRP). The process involves first, the preparation of poly(p-chloromethyl styrene) (PCMS-CH₂Cl) macroinitiator without any cross-linking or side reactions through pendant benzyl chloride (?CH₂Cl) functionality by cationic polymerization using a simple FeCl₃-based initiating system at 25 °C. The as-synthesized PCMS-CH₂Cl, without any transformation, is then used as the macroinitiator to graft PMMA and PBzMA branches by ATRP to produce PCMS-g-PMMA and PCMS-g-PBzMA graft copolymers of varying compositions with controlled molecular weight and moderately narrow polydispersities (M _w/M _n?≤?1.32). The resulting PCMS₂₁ -g-PMMA₂₃₂ graft copolymer in thin film form phase separates into spherical morphology with an average diameter of 170?±?72 nm. Whereas the PCMS₂₁ -g-PBzMA₁₅₆ graft copolymer gives worm-like nanostructures with an average length of 94 nm and width of 31 nm due to phase separation as visualized through atomic force microscopy. On the other hand, the phase-separated morphology is not very well-defined for other graft copolymers (PCMS₁₁₃ -g-PMMA₂₂₇ and PCMS₁₁₃ -g-PBzMA₁₅₄) thin films containing longer PCMS chains. This approach represents a rapid and convenient route to prepare unique spherical/worm-like polymer nanostructures. Figure

Well-defined poly(p-chloromethyl styrene)-graft-poly(methyl methacrylate) (PCMS-g-PMMA) and poly(p-chloromethyl styrene)-graft-poly(benzyl methacrylate) (PCMS-g-PBzMA) graft copolymers with asymmetric branches are synthesized by the combination of living cationic polymerization and atom transfer radical polymerization (ATRP). The resulting PCMS₂₁ -g-PMMA₂₃₂ and PCMS₂₁ -g-PBzMA₁₅₆ graft copolymers phase separate into nanostructured spherical and worm-like morphologies, respectively, in thin film form. The phase-separated morphology is not very well-defined for graft copolymers (PCMS₁₁₃ -g-PMMA₂₂₇ and PCMS₁₁₃ -g-PBzMA₁₅₄) thin films containing longer PCMS chains.     

Living radical graft polymerization of methyl methacrylate to polyethylene film with typical and reverse atom transfer radical polymerization

Nickel‐mediated atom transfer radical polymerization (ATRP) and iron‐mediated reverse ATRP were applied to the living radical graft polymerization of methyl methacrylate onto solid high‐density polyethylene (HDPE) films modified with 2,2,2‐tribromoethanol and benzophenone, respectively. The number‐average molecular weight (M_n) of the free poly(methyl methacrylate) (PMMA) produced simultaneously during grafting grew with the monomer conversion. The weight‐average molecular weight/number‐average molecular weight ratio (M_w/M_n) was small (<1.4), indicating a controlled polymerization. The grafting ratio showed a linear relation with M_n of the free PMMA for both reaction systems. With the same characteristics assumed for both free and graft PMMA, the grafting was controlled, and the increase in grafting ratio was ascribed to the growing chain length of the graft PMMA. In fact, M_n and M_w/M_n of the grafted PMMA chains cleaved from the polyethylene substrate were only slightly larger than those of the free PMMA chains, and this was confirmed in the system of nickel‐mediated ATRP. An appropriate period of UV preirradiation controlled the amount of initiation groups introduced to the HDPE film modified with benzophenone. The grafting ratio increased linearly with the preirradiation time. The graft polymerizations for both reaction systems proceeded in a controlled fashion. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3350–3359, 2002     

Synthesis and swelling behavior of amphiphilic comb‐like branched polymer (AA‐co‐CMS)‐g‐PMMA

Copolymerization of acrylic acid and p‐chloromethylstyrene (p‐CMS) in dioxane initiated with α,α′‐azobisisobutyronitrile was carried out to produce macroinitiator P(AA‐co‐CMS) containing PhCH₂Cl group at 65°C. Then methyl methacrylate was grafted onto P(AA‐co‐CMS) backbone using PhCH₂Cl group as an initiation site and FeCl₂/triphenyl phosphine complex as a catalyst. The resulted copolymer (AA‐co‐CMS)‐g‐PMMA with a comb‐like branched structure has a hydrophilic backbone (PAA) and hydrophobic side chains (PMMA). Compositions and structures of macroinitiator and the grafted product of P(AA‐co‐CMS)‐g‐PMMA were determined by ¹H‐NMR, infrared (IR), and gel permeation chromatography (GPC). The average graft number, the average length of branch chains, the graft ratio, and the graft efficiency were investigated. The swelling behavior of the comb‐like branched polymer was also investigated. The gradual increase of swelling ratios was accompanied by an increase of pH and temperature. The kinetic exponents indicated that the swelling transport mechanisms transformed from Fickian diffusion to non‐Fickian transport as the decreasing pH. Copyright © 2009 John Wiley & Sons, Ltd.     

Pseudo interpenetrating polymer networks and interpenetrating polymer networks of zeolite 13 X and polystyrene and poly(ethyl acrylate)

Free-radical polymerization of liquid styrene and ethyl acrylate with or without ethylene dimethacrylate crosslinker in the presence of zeolite 13 X produces interpenetrating polymer networks (IPN's) or pseudo IPN's in which polymer chains have grown and filled internal pores of the zeolite. A variety of methods of characterization including, solubility studies, differential scanning calorimetry (DSC), scanning electron microscopy (SEM), ¹³C solid-state nuclear magnetic resonance (NMR) and small-angle X-ray scattering (SAXS) provide supporting evidence for this. The polymer chains within the internal pores do not exhibit a bulk glass transition. This is part of a larger study of the glass transition of polymers confined to cavities or pores of various sizes.     

Novel core-shell nanoparticles and their application in high-capacity immobilization of enzymes

Novel core-shell nanoparticles consisting of poly(methyl methacrylate) (PMMA) cores coated with synthetic polymer and biopolymer (polyethyleneimine, chitosan, and casein) shells were synthesized via direct graft copolymerization of methyl methacry late from hydrophilic polymers in the absence of surfactant. Average hydrodynamic diameters of the nanoparticles ranged from 163 to 263 nm. High-capacity (up to 530 mg/g) immobilizations of enzymes and high-activity retained percentage (E _spe) (up to 90%) were achieved.     

Preparation of Latexes with Poly(Methyl Methacrylate) Cores and Hydrophilic Polymer Shells Containing Amino Groups

Abstract

Functional latexes with poly(methyl methacrylate) (PMMA) cores and amino‐containing, water‐soluble polymer shells were synthesized via direct graft copolymerization of methyl methacrylate from water‐soluble polymers induced by a small amount of tert‐butyl hydroperoxide (TBHP) at 80°C for 2 h. Amphiphilic graft copolymers and PMMA homopolymers were generated concurrently to form highly monodispersed latexes. The effects of water‐soluble polymer containing different amino group, reaction temperature, TBHP concentration, molecular weight of the polymer and pH of the solution on conversion and grafting efficiency of the monomer and particle size were investigated. Transmission electron microscopic images of the PMMA/poly(ethyleneimine) (PEI) and PMMA/poly(allylamine) (PAA) particles clearly show well‐defined core‐shell morphologies, where PMMA cores are coated with either PEI or PAA shell. The amino‐containing polymer shells were also confirmed with zeta‐potential measurements. Furthermore, the amino‐containing latexes can be produced with a solids content up to 22 wt.%. Thus, this method provides a commercially viable route to functional latexes.     

Structure and properties of poly(methyl methacrylate) particles prepared by a modified microemulsion polymerization

Nanoscale poly(methyl methacrylate) (PMMA) particles were prepared by modified microemulsion polymerization. Different from particles made by traditional microemulsion polymerization, the particles prepared by modified microemulsion polymerization were multichain systems. PMMA samples, whether prepared by the traditional procedure or the modified procedure, had glass-transition temperatures (T_g's) greater than 120 °C and were rich in syndiotactic content (55–61% rr). After the samples were dissolved in CHCl₃, there were decreases in the T_g values for the polymers prepared by the traditional procedure and those prepared by the modified process. However, a more evident T_g decrease was observed in the former than in the latter; still, for both, T_g was greater than 120 °C. Polarizing optical microscopy and wide-angle X-ray diffraction indicated that some ordered regions formed in the particles prepared by modified microemulsion polymerization. The addition of a chain-transfer agent resulted in a decrease in both the syndiotacticity and T_g through decreasing polymer molecular weight. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 733–741, 2004     

Structure of Styrene and Acrylate Block Copolymers

Abstract

Using UV light as the energy source and polystyrene- (PS-) or polymethyl methacrylate- (PMMA-) macroinitiators with active aromatic or aliphatic thiyl end groups, PS-PMMA and PMMA-PEA (poly-ethyl acrylate) block copolymers were synthesized. The molecular weights of both block copolymers increased with increasing reaction time. The reactivity of macroinitiators depended on the type of thiyl groups and monomer and not on the length of the polymer chain. The most reactive were macroinitiators containing resonance stabilized non-substituted or substituted aromatic end groups. The decomposition of the macroinitiators took place over the formation of the thiyl radical and macroradical. The bond length, the bond dissociation energy, and the bond order of macroradical end groups were calculated. The most reactive monomer was ethyl acrylate; the less reactive was styrene. The structure, the molecular weight, and the T _g of the styrene-acrylate block copolymers were determined. The PMMA/PEA block copolymer had two of block's T _g s, the first at 105°C, the second at ?24°C, and a third at 16°C which probably represents contacting segments.     

Ionic conductivity and compatibility studies of blends of poly(methyl methacrylate) and poly(propylene glycol) complexed with LICF3SO3

Stable to atmospheric moisture, adhesive and transparent polymer electrolytes have been prepared by blending poly(methyl methacrylate) (PMMA) with poly(propylene glycol)-425/LiCF₃SO₃ complexes. The blending of the polymers has been achieved by a method developed in our laboratory: free radical polymerization of methylmethacrylate in the polyether/salt matrix. A series of polymer blend complexes varying in PMMA content (up to 20% by weight) and oxygen/metal ratios (25, 16, and 8) have been synthesized and their properties studied. All the samples prepared in this study were found to be optically clear unlike the higher molecular weight poly(propylene glycol)-2000 (PPG-2000) system which required a minimum salt concentration to compatibilize a specific amount of PMMA with PPG. The mechanisms by which the salt holds the otherwise incompatible polymers together in a single phase have been investigated by FT-IR. Our studies show a weak coupling of the ether oxygens in the PPG with the ester groups of the PMMA through the lithium cations. Discrete changes has been observed in the FT-IR spectrum of PMMA when doped with the lithium salt hitherto unnoticed with other dopants. Gel permeation chromatography results of the PMMA samples isolated from the solid electrolytes indicate the molecular weight to vary between 43000 and 121000 with relatively narrow distributions, 1.6?2.0. The ionic conductivities of the polymer blend electrolytes were fairly high (10^?5 S/cm) at room temperature. The PMMA neither significantly influenced the T_g of the blend complexes nor effected the ionic conductivities drastically. The ionic conductivity as a function of temperature followed the empirical Vogel-Tammann-Fulcher equation. The blending of PMMA with PPG/LiCF₃SO₃ complexes was found to impart good adhesiveness to the solid electrolytes while making them stable to atmospheric moisture. © 1992 John Wiley & Sons, Inc.     

Reverse atom transfer radical polymerization of methyl methacrylate with a new catalytic system,FeCl3/isophthalic acid

A new catalytic system, FeCl₃/isophthalic acid, was successfully used in the reverse atom transfer radical polymerization (RATRP) of methyl methacrylate (MMA) in the presence of a conventional radical initiator, 2,2′‐azo‐bis‐isobutyrontrile. Well‐defined poly(methyl methacrylate) (PMMA) was synthesized in an N,N‐dimethylformamide solvent at 90–120 °C. The polymerization was controlled up to a molecular weight of 50,000, and the polydispersity index was 1.4. Chain extension was performed to confirm the living nature of the polymer. The kinetics of the RATRP of MMA with FeCl₃/isophthalic acid as the catalyst system was investigated. The apparent activation energy was 10.47 kcal/mol. The presence of the end chloride atom on the resulting PMMA was demonstrated by ¹H NMR spectroscopy. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 765–774, 2001